WesloメーカーWCTL39110の使用説明書/サービス説明書
ページ先へ移動 of 19
400 CS ® USER'S MANUAL QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are missing parts, please call: 1-888-936-4266 Mon.–Fri. 8h00 until 18h30 EST (excluding holidays).
T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14. Never start the treadmill while you are stand- ing on the walking belt. Always hold the handrails while using the treadmill. 15. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed. 16 . Never leave the treadmill unattended while it is running.
Thank you for selecting the WESLO ® CADENCE 400 CS treadmill. The CADENCE 400 CS treadmill com - bines advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exer- cise in the convenience and privacy of your home.
1. With the help of a second person, carefully raise the Uprights (11) until the treadmill is in the position shown. Cut the tie from the right Upright (11). 11 Tie ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove the packing materials.
6. Attach the Storage Latch (14) to the left Upright (11) with two Screws (13). Do not to overtighten the Screws. See step 4. Tighten the Handrail Nuts (93). 7. Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen wrench in a secure place.
OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form.
BATTERY INSTALLATION The console requires two "AA" batteries (not in - cluded). Alkaline batteries are recommended. Open the battery cover as shown in the drawing at the upper right. Insert two batter ies into the console, making sure that the negative (–) ends of the batteries are touching the springs in the console.
Follow the steps below to operate the console. Insert the key fully into the console. Inserting the key will not turn on the dis- plays. The displays will turn on when the ON/RESET button is pressed or when the walking belt is started. Note: If you just installed batteries, the displays will already be on.
HOW TO SELECT KILOMETRES AND MILES The console can display distance and speed in either kilometres or miles. To change the unit of measurement, first UNPLUG THE POWER CORD. Next, remove the screws attaching the console to the console base. Lift the console a few inches, being careful not to pull on the wires, and turn the console over.
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. Caution: You must be able to safely lift 20 kg (45 lbs) in order to raise, lower, or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right.
MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, call our Customer Service Department toll-free at 1-888- 936-4266 , Monday through Friday 8h00 until 18h30 Eastern Time (excluding holidays).
PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that is UL 1449 listed as a transient voltage surge sup- pressor (TVSS). The surge suppressor must have a UL suppressed voltage rating of 400 volts or less and a minimum surge dissipation of 450 joules.
14 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
ICON of Canada, Inc. 900 de l’Industrie St-Jérôme, Québec Canada, J7Y 4B8 PLACE ST AMP HERE ORDERING REPLACEMENT P ARTS To order replacement parts, call toll-free 1-888-936 -4266, Monday through Friday 8h00 until 18h30 Eastern Time (excluding holidays).
Part No. 211201 R0704A Printed in Canada © 2004 ICON IP, Inc. ® IMPORTANT: MAIL WITHIN 14 DAYS OF PURCHASE NAME: ADDRESS: COUNTY: MODEL NO. RETAILER NAME: PHONE: POSTCODE: SERIAL NO.
34 REMOVE THIS EXPLODED DRA WING AND P ART LIST FROM THE MANUAL Save this EXPLODED DRA WING and P ART LIST for future reference. Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of the User’s Manual.
P ART LIST—Model No. WCTL391 10 R0704A 1 1 Left Handrail 2 1 Key/Clip 3 2 Incline Leg Pivot Bolt 4 1 Battery Cover 5 1 Foot Grip (Left) 6 1 Lift Motor 7 1 Rear Roller 8 1 Speed Potentiometer 9 1 Spe.
33 65 48 66 24 56 66 79 90 102 79 42 66 77 40 101 40 101 59 85* 33 58 57 9 8 25 35 100 101 2 34 12 22 20* 21 66 27 19 18 31 30 29 66 43 36 99 44 37 45 50 47 48 48 39 51 1 1 23 66 66 58 15 53 36 37 99 .
デバイスWeslo WCTL39110の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Weslo WCTL39110をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはWeslo WCTL39110の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Weslo WCTL39110の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Weslo WCTL39110で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Weslo WCTL39110を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はWeslo WCTL39110の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Weslo WCTL39110に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちWeslo WCTL39110デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。