WesloメーカーWLTL29820の使用説明書/サービス説明書
ページ先へ移動 of 19
Model No. WL TL29820 Serial No. Write the serial number in the space above for future reference. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. USER'S MANUAL Serial Number Decal Visit our website at www .
2 T ABLE OF CONTENTS IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed. 17 . Never leave the treadmill unattended while it is running. Always remove the key and unplug the power cord when the treadmill is not in use.
4 BEFORE YOU BEGIN Handrail Console Storage Latch Key/Clip Circuit Breaker W alking Belt Foot Rails Incline Leg Power Cord FRONT BACK RIGHT SIDE Rear Roller Adjustment Bolts W ater Bottle Holder (Bottle not included) Upright Thank you for selecting the WESLO ® CADENCE DS1 1 treadmill.
5 ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dis pose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
6 4. If there are plastic ties in the brackets on the Left and Right Handrails (4, 94), remove them. Hold the Right Handrail near the Right Upright (62) as shown. Insert the Wire Harness (53) up through the bracket on the Handrail and out of the round hole in the side of the Handrail.
66 5 14 9 9. Attach the Storage Latch (66) to the Left Upright (14) with two 3/4” Screws (5). 10. Make sure that all parts used in assembly are prop- erly tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 13).
8 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM W ALKING BEL T Y our treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORT ANT : Never apply silicone spray or other substances to the walking belt or the walking plat- form.
9 CAUTION: Before operating the console, read the following precautions. • Do not stand on the walking belt when turning on the power . • Always wear the clip (see the drawing below) while using the treadmill. When the key is removed from the console, the walking belt will stop.
10 Follow the steps below to operate the console. Insert the key fully into the console. Inserting the key will not turn on the displays. The displays will turn on when the ON/RESET button is pressed or when the walking belt is started. Note: If you just installed batteries, the displays will already be on.
11 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, unplug the power cord. CAUTION: Y ou must be able to safely lift 45 pounds (20 kg) in order to raise, lower or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right.
12 MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below . Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday , 6 a.
13 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may become damaged.
14 CONDITIONING GUIDELINES The following guidelines will help you to plan your exercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
T raining Zone Exercise After warming up, increase the intensity of your exer- cise until your pulse is in your training zone for 20 to 60 minutes. (During the first few weeks of your exer- cise program, do not keep your pulse in your training zone for longer than 20 minutes.
Part No. 188513 R0902A Printed in USA © 2002 ICON Health & Fitness, Inc. ORDERING REPLACEMENT P ARTS T o order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday , 6 a.m. until 6 p.m. Mountain T ime (excluding holidays).
Wheel Nut (43)–2 Handrail W asher (7)–4 1 1/4” Screw (86)–4 Star W asher (2)–6 (May be an internal Star W asher) 1” T ek Screw (31)–4 3/4” Screw (5)–8 Wheel Bolt (41)–2 1” Bolt (16)–10 Remove this chart and use it to identify small parts during assembly .
P ART LIST—Model No. WL TL29820 R0902A 1 4 Front Endcap Screw 2 6 Star W asher 3 2 Plastic T ie 4 1 Left Handrail 5 20 3/4” Screw 6 1 Key/Clip 7 2 Handrail W asher 8 2 Incline Leg 9 2 Shim 10 1 Wi.
28 30 45 28 28 17 9 17 16 16 66 14 7 7 5 6 63 75 62 51 51 40 52 36 76 69 68 70 67 50 60 73 81 79 78 40 76 77 83 37 27 43 43 84 76 35 38 53 76 5 87 12 5 11 64 64 82 41 42 43 18 22 23* 26 25 24 19 20 48.
デバイスWeslo WLTL29820の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Weslo WLTL29820をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはWeslo WLTL29820の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Weslo WLTL29820の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Weslo WLTL29820で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Weslo WLTL29820を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はWeslo WLTL29820の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Weslo WLTL29820に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちWeslo WLTL29820デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。