WesloメーカーWLTL62790の使用説明書/サービス説明書
ページ先へ移動 of 26
USER'S MANUAL ¨ CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. WLTL62790 Serial No. Find the serial number in the location shown below.
2 T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described in this manual. 3. The treadmill is intended for home use only. Do not use the treadmill in a commercial, rental, or institutional setting.
4 provides information with respect to proper grounding of the mast and supporting struc- ture, grounding of the lead-in wire to an an- tenna discharge unit, size of grounding con- ductors, location of antenna discharge unit, connection to grounding electrodes, and re- quirements for the grounding electrode.
5 the unit is in proper operating condition (refer to the drawing below). ¥ Use No. 10 AWG (5.3mm 2 ) copper, No. 8 AWG (8.4mm 2 ) aluminum, No. 17 AWG (1.0mm 2 ) copper-clad steel or bronze wire, or larger as a ground wire. ¥ Secure antenna lead-in and ground wires to house with stand-off insulators spaced from 4 to 6 feet (1.
6 Thank you for selecting the new WESLO ¨ CADENCE TV36 treadmill. The CADENCE TV36 treadmill com- bines advanced technology with innovative design to help you get the most from your exercise program in the convenience of your home.
7 ASSEMBL Y Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own phillips screwdriver .
8 7. Make sure that all parts are tightened before you use the treadmill. Note: The ratchet screws on the adjustable rear incline are factory set and should not be adjusted. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 20).
9 THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. They will deteriorate the walking belt and cause excessive wear.
10 CONSOLE DIAGRAM FEATURES OF THE CONSOLE The treadmill console is designed to make your work- outs more enjoyable and effective. As you exercise, the integral color TV will show your favorite televi.
11 Insert the key into the console. Inserting the key will not turn on the displays. The dis- plays will turn on when the ON/ RESET button is pressed or when the walking belt is started. Note: If you just installed batteries, the displays will already be on.
12 1. Power indicator (Note: The power indicator will remain on whenever the on/off switch is on.) 2. POWER button 3. CHANNEL ▲ ▲ and ▼ ▼ buttons 4. VOLUME + and Ð buttons 5. Compartment door ( IMPORTANT: The treadmill and TV, like any other electronic equipment, can be damaged by static electricity.
13 Outdoor Antenna Outdoor antennas are subject to weathering that can reduce signal quality. Inspect the antenna and lead-in wiring before connecting the antenna. Any service cen- ter can explain the various outdoor antennas available. 300 Ohm Flat Wire 1.
14 Memorizing Channels The TV is equipped with a channel memorizing func- tion that allows you to step up or down from the current channel to the next channel set into memory. Before channels can be selected in this way, they must be set into the TVÕs memory.
15 Manually Searching for and Storing Channels 1. Press the MENU button to turn on the pop-up menu. Press the MENU button again to select CH MEMORY. 2. Press the + or Ð button to move the arrow to SEARCH/SKIP. Select SEARCH/SKIP by press- ing the MENU button.
16 Picture level controls are preset to nominal levels. If desired, you can individually adjust the contrast, bright- ness, color, or tint by following the steps below. 1. Press the MENU button to turn on the pop-up menu. 2. Press the + or Ð button to move the arrow to ANALOG.
Setting the Channel to be Recorded 1. After the on timer has been set, press the MENU button repeatedly to select ON CH (on channel). 2. Press the + button to cycle through the channels until the desired channel is selected. 3. Press the Ð button to cycle through the four channel modes: (1) TV, (2) STD, (3) HRC, (4) IRC.
HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be permanently damaged. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) in order to raise, lower, or move the treadmill.
TROUBLE-SHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-800-999-3756, Monday through Friday, 6 a.
PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in length. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged.
21 PROBLEM: TV reception is poor SOLUTION: a. For the television to operate properly, good reception is necessary. If you are using an antenna, make sure that it is properly connected and that it is adjusted for optimal reception. (See AN - TENNA CONNECTIONS on page 12.
22 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. RememberÑthese are general guide- lines only. For more detailed exercise information, ob- tain a reputable book or consult your physician.
P ART LISTÑModel No. WL TL62790 R1099A 1 1 Left Foot Rail 2 6 Hood Screw 3 3 Plastic Washer 4 4 Isolator 5 8 Isolator Screw 6 4 Platform Screw 7 2 Frame Pivot Nut 8 1 Magnet 9 1 Reed Switch/Sensor Wire 10 1 Reed Switch Screw 11 1 Reed Switch Clip 12 1 Front Pulley/Roller 13 1 Console 14 1 Front Roller Adj.
25 43 41 79 41 79 39 11 9 8 12 15 6 6 79 14 49 39 52 50 39 17 19 15 20 22 21 6 6 1 44 39 40 46 30 23 7 7 45 48 16 34 33 36 32 29 27 26 26 28 31 37 30 36 33 31 35 35 42 19 4 11 3 4 11 3 19 19 19 19 23 34 11 5 4 11 3 109 4 11 3 109 109 109 EXPLODED DRA WINGÑModel No.
72 74 102 39 100 75 76 72 108 72 107 72 107 72 103 72 72 86 39 107 79 107 79 18 18 53 67 68 69 70 71 72 80 81 82 77 72 77 106 105 98 72 111 111 79 79 79 79 79 39 83 85 78 71 71 13 88 108 97 60 80 82 6.
Part No. 159318 R1099A Printed in Canada © 1999 ICON Health & Fitness, Inc. ORDERING REPLACEMENT P ARTS To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).
デバイスWeslo WLTL62790の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Weslo WLTL62790をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはWeslo WLTL62790の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Weslo WLTL62790の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Weslo WLTL62790で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Weslo WLTL62790を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はWeslo WLTL62790の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Weslo WLTL62790に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちWeslo WLTL62790デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
