Woods Equipmentメーカー1013460の使用説明書/サービス説明書
ページ先へ移動 of 24
I NST AL LA TION MAN U AL SA VE THIS MANU AL! Include it with the backhoe manual. It contains safety , operation, and repair part information not found in other manuals.
2 Introduction SFMK (Re v . 2/20/2008) T O THE DEALER : Assemb ly and prop er installati on of this pro duct is the r esponsi bility of the Woods ® dealer.
Safety 3 4-Point SFMK (Rev . 5/8/2006) SAFETY RULES ATTENTION! BECOME ALER T! Y OUR SA FETY IS INV OLVED! This Sub-Frame Mounting Kit is only fo r the backhoes and tractors specified in the Su b-Frame Mount Installation secti on of this manua l. Any other use or modific ation of this moun ting k it may result in se rious injury or deat h.
4 Safety 4-Po int S FMK ( Rev . 5/ 8/20 06) SAFETY RULES ATTENTION! BECOME ALER T! YOUR SAFETY IS IN V OLV ED! (Safety R ules co ntinued from previous page) Make su re al l hydraulic hoses , fittin gs, and valves are in good condition and not leaking before st arting power unit or using equipment.
Inst allation 5 MAN040 6 (Rev . 9/7/2007) BACKHOE SUB-FRAME INST ALLA TION T ractor Prep aration ■ Only us e 1013 460 4-P oint Sub -Fram e Mount- ing Kit for moun ting Woods BH70-X, BH80-X, BH6500, .
6 Installation MAN040 6 (Rev .9/7/2007) Inst all Front Mount s With W oods LS84 Loader Mount Attach front m ount (32) to the rig ht loade r mount using two cap scr ews (26 ), hardened flat was hers (23) an d hex nuts ( 27). 23. 57817 5/8 Harde ned fla t washer 26.
Inst allation 7 MAN040 6 (Rev . 9/7/2007) Inst all T ractor Bracket s With W oods LS84 Loader Mount 1. P lace left tractor bracket (2) under left side of tractor .
8 Installation MAN040 6 (Rev .9/7/2007) Inst all T ractor Brac kets 1. Place le ft tractor brac ket (2 ) under le ft side of tractor . Use a hy draulic floor jack to help rais e and hold t ractor bracke t in posi tion.
Inst allation 9 MAN040 6 (Rev . 9/7/2007) Inst all Cross Brace 1. Remove PT O shield . 2. Attach cr oss br ace (7 ) to re ar of tr actor using tw o cap scre ws (2 4) and har dened fl at wash ers (23 ). 3. Attach to right and left tractor b rackets us ing four (two per s ide) c ap screw s (18) , harden ed fla t washers ( 22), and hex nuts (15).
10 Installation MAN040 6 (Rev .9/7/2007) T orque Mounting Hardware Att ach Backhoe M ounts to Backho e NOTE: Lea ve a ll har dware l oose until back hoe has been mount ed to the tractor . 1. Attach right backh oe moun t (3) and le ft backhoe mount (4) to back hoe fram e.
Inst allation 11 MAN040 6 (Rev . 9/7/2007) HYDRAULIC INST ALLATION Keep hands and body away from pres surized lines. Use p aper or cardboard, not hands or other body p arts to check for leaks. W ear safety gog- gles. Hydrauli c f luid under pressu re can easily penetrate skin and will cause ser ious injury or death.
12 Installation MAN040 6 (Rev .9/7/2007) Inst all Hydraulic Block and Fittings 1. Locate the hydrau lic m anifold b lock on the righ t side of the tractor just u nder the fende r (Figu re 19) and rem ove th e block -off cap.
Inst allation 13 MAN040 6 (Rev . 9/7/2007) Inst all Bulkhead Adapter on Backhoe Mount 1. Attach bul khead a dapter (1 ) to crossm ember between backhoe bracke ts. Secure with nu t sup- plied wit h adapte r . 2. Atta ch elbo w (10) and fem ale qui ck coup ler (1 6) to bulkhe ad adapter as sho wn in Figur e 23.
14 Installation MAN040 6 (Rev .9/7/2007) Mount Backhoe to T ractor This mounting kit is designed to provide secure moun ting and adequ ate operator c lear- ance for mo st operators when p roperly inst alled. Check clearance dimensions shown below to be sure you have installed seat bracket corr ectly .
Inst allation 15 MAN040 6 (Rev . 9/7/2007) Mount Backhoe to T r actor ( Continued) Refer to Figure 26. 5. Using th e back hoe h ydraul ics posit ion th e back - hoe brac kets at a sl ight a ngle, appr oximate ly 5 t o 10 degrees.
16 Installation MAN040 6 (Rev .9/7/2007) Remove Backhoe from T ractor The only time the bac khoe may be operated from a position other than the operator seat is during backhoe a tt achme nt and remova l. Opera- tor must: • Read Mounting Kit Manual instructions on att aching and removing backhoe and use extreme c are.
Inst allation 17 MAN040 6 (Rev . 9/7/2007) STORAG E Connect Hydraulic Hoses TRACTOR: Conn ect male quic k co upler on end o f hose to femal e quic k coupler at bulkhea d bracke t when back hoe is remov ed from tra ctor . See F igure 28. NOTICE ■ Failure to connect hoses together will result in damage t o tractor hydraulic sy stem.
18 Part s MAN040 6 (Rev . 9/7/20 07) 1013460 4-POINT SUB-FRAME MOU NTING KIT W ARNING PINCH POINT Keep hands clear . 1006885 31 - PN 1 006885 MODEL NO.
Part s 19 MAN0406 (Rev . 9/7/2007) 1013484 HOSE KIT R E F P ART QTY DESCRIPTION 1 1006144 1 Adapt er , bulkhe ad 3/8 N PTM x 3/4 JICM 2 1009493 1 Hose, 40" x 3/8 NPTM x 9/16 JICF 3 1009495 1 Adap.
20 Appendix Bolt T orque & Size Chart s (Rev . 3/28/2007) BOLT T O RQUE CHART Always tighten har dware to these v alue s unles s a different torque value or tighte ning p rocedure i s list ed for a specifi c applica tion . F ast eners must al wa ys be repla ced wi th the sam e grade as sp ecified in the m anual par ts list.
Appendix 21 Bolt T orque & Siz e Chart s (Rev . 3/28/2007 ) BOLT SIZE CHART NOTE: Chart s hows b olt thr ead siz es an d corres pondin g head (w rench ) size s for standard SA E and metric bolts. ABBREVIATIONS AG ........ ............. ....... ...
F-8494 (Rev . 6/23/2005) W ARRANTY (Replacement Parts F or All Models Except Mow’ n Machine TM Zero-T urn Mowers and W oods Boundary TM Utility V ehicles ) W oods Equipm ent Compan y (“WOODS”) w.
F-3079 (Rev . 4/4/2008) W ARR ANTY (All Models Except Mow’ n Machine TM Zero-T urn Mo wers and W oods Boundar y TM Utility V ehicles) Ple ase En ter In fo rmat ion Be low an d Save for Fu ture Ref eren ce.
P ART NO. MAN0406 © 2005 Woods Equipment Company . All rights reserved. WOODS, t he Woods logo, and "T ested. Proven. Unbeatable." are trademarks of Woods Equipment Company .
デバイスWoods Equipment 1013460の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Woods Equipment 1013460をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはWoods Equipment 1013460の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Woods Equipment 1013460の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Woods Equipment 1013460で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Woods Equipment 1013460を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はWoods Equipment 1013460の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Woods Equipment 1013460に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちWoods Equipment 1013460デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。