XeroxメーカーPhaser 7750の使用説明書/サービス説明書
ページ先へ移動 of 19
Phaser® 7750 Color Laser Printer Copyright © 2004 Xerox Corporation . All Rights Reserved. 2-11 Basic Printing This topic includes: ■ "Loading P aper in T ray 1 (MPT)" on page 2-11 ■ &.
Basic Printing Phaser® 7750 Color Laser Printer 2-12 1. Lo wer T ray 1 (MPT). 2. Adjust the paper guides to the size of the paper . The arro w on th e width guide, di splayed in the follo wing graphic, must line up with on e of three positions identified on the labeled area ne xt to the width guide.
Basic Printing Phaser® 7750 Color Laser Printer 2-13 3. Fan the paper t o release sheets that may stick together . 4. Insert the paper or transparen cies into the tray either long-edge feed or short-edge feed . If necessary , a dju st the paper guide s to the size of the paper .
Basic Printing Phaser® 7750 Color Laser Printer 2-14 Short-Edge F eed ■ Place Legal, T abloid, T abloid Extra, A3, A5, US Folio, B4 JIS, and SRA3 paper short-edge feed in T ray 1 (MPT). Do not lo ad paper abov e the f ill line. ■ Place the side to be printed facedown .
Basic Printing Phaser® 7750 Color Laser Printer 2-15 T ray 1 (MPT) Paper Path The following graphic displays the printer’ s paper path: 7750-121.
Basic Printing Phaser® 7750 Color Laser Printer 2-16 Loading Paper in T rays 2-5 For more information on paper ty p es, weights, and sizes, go to Reference/Printi ng/Supported Pap er s on the User Documentation CD-R OM . 1. Pull out the tray . 2. If loading paper ha ving a dif ferent width or length, adjust the width and length gui des.
Basic Printing Phaser® 7750 Color Laser Printer 2-17 3. Fan the paper t o release sheets that may stick together . 4. Insert paper or transparencies into the tray either long-edge feed or short-edge feed . Long-Edge Feed ■ Place Letter , A4, and B5 JIS paper long-edge feed into the tray .
Basic Printing Phaser® 7750 Color Laser Printer 2-18 ■ Place pre-punched paper with the holes to ward the right side of the tray . ■ Place letterhead (or the top of the page) to ward the front of the tray . Short-Edge F eed ■ Place Legal, T abloid, A3, A5, B4 JIS, US Folio, and Statement paper short-edge feed into the tray .
Basic Printing Phaser® 7750 Color Laser Printer 2-19 5. If necessary , adjust the paper guid es to the size of the paper . Adjust the paper guides accordin g the paper size and orientation (long-edge feed o r short- edge feed). Labels inside the pa per tray pr ovide additional information for loading paper according to size and o rientation.
Basic Printing Phaser® 7750 Color Laser Printer 2-20 3. Select one of the follo wing paper size o ptions: ■ The paper size displayed or A uto-Sensed ■ Custom : Requires you to select custom widt h an d custom height values.
Basic Printing Phaser® 7750 Color Laser Printer 2-21 Automatic 2-Sided Printing in T rays 2-5 1. Place paper in T rays 2, 3, 4, or 5. Long-Edge Feed ■ Place Letter , A4, and B5 JIS paper long-edge feed into the tray . ■ Place the side to be printed facedown .
Basic Printing Phaser® 7750 Color Laser Printer 2-22 2. If necessary , adjust the paper guid es to the size of the paper . 3. Push the tray completely into the printer . Selecting Front Panel Settings Tr a y 2 1. At the printer’ s front panel, do one of the follo wing: ■ Press the OK button if both the paper type and size selected are correct.
Basic Printing Phaser® 7750 Color Laser Printer 2-23 3. Select one of the follo wing paper size o ptions: ■ The paper size displayed or A uto-Sensed ■ Custom : Requires you to select custom widt h an d custom height values.
Basic Printing Phaser® 7750 Color Laser Printer 2-24 Using the Stapler The optional Finisher can st ap le up to 50 sheets of paper . Once the print job is stapled, i t is deli vered to the Finisher Output T r ay . The stapler holds 5000 staples. Note The printer cannot staple paper fed from T ray 1 (MPT).
Basic Printing Phaser® 7750 Color Laser Printer 2-25 Use the follo wing table to determ ine the position of the staples: Stapling Orientation P aper Feed Direction Long-Edge Feed Short-Edge Feed F ron t P or trait Landscape Rear P or trait Landscape Dual * P or trait Landscape * P aper siz e must be Letter , A4, B4 JIS, B5 JIS , A3, or T abloid.
Basic Printing Phaser® 7750 Color Laser Printer 2-26 Adding Staples 1. Open Finisher Door J. 2. Pull the staple cartridge to the front of the fi nisher .
Basic Printing Phaser® 7750 Color Laser Printer 2-27 4. Press the sides of the staple cartridge together where you see the word “Push” then lift the part of the staple cartridge that is released. 5. Remov e the empty cartridge from the staple cartridge.
Basic Printing Phaser® 7750 Color Laser Printer 2-28 7. Push do wn the top of the staple ca rtridge until it clicks into place. 8. Replace the staple cartridge in the printer .
Basic Printing Phaser® 7750 Color Laser Printer 2-29 Factors Affecting Printer Performance Many factors af fect a print jo b . The y incl ude the print speed (st ated in number of pages per minute), the media used, download time, and printer processing time.
デバイスXerox Phaser 7750の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Xerox Phaser 7750をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはXerox Phaser 7750の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Xerox Phaser 7750の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Xerox Phaser 7750で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Xerox Phaser 7750を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はXerox Phaser 7750の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Xerox Phaser 7750に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちXerox Phaser 7750デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。