Yamahaメーカー01Xの使用説明書/サービス説明書
ページ先へ移動 of 156
.
2 01X Owner’s Manual PLEASE KEEP THIS MANU AL 92-BP (rear) This product utilizes batteries or an external power supply (adapter). DO NO T connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended b y Y amaha.
01X Owner’s Manual 3 1. IMPORT ANT NO TICE: DO NO T MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifi- cations not expressly appro ved by Y amaha may v oid your authority , granted by the FCC , to use the product.
4 01X Owner’s Manual PRECAUTIONS PLEASE READ CAREFULL Y BEFORE PROCEEDING * Please keep this man ual in a safe place f or future reference . W ARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards.
01X Owner’s Manual 5 CAUTION Always follow the basic precautions listed below to avoid the possibility of physical injury to you or others, or damage to the instrument or other property .
6 01X Owner’s Manual Introduction Congratulations and thank you for pur chasing the Y amaha 01X Digital Mixing Studio. The 01X is a full-featur ed music pr oduction tool that effectively gives you t.
01X Owner’s Manual 7 About This Manual This manual consists of the f ollowing sections. Before Using (page 14) Use this section to find out about all of the buttons, controls and connectors of the 01X. It also explains how to set up the instrument and connect external equipment.
8 01X Owner’s Manual The 01X — What it is and what it can do Powerful, multi-faceted digital mixer , computer audio recording interface, and control surface—all in one The 01X is actually several full-featured high-end digital devices in one compact, easy-to-use package.
01X Owner’s Manual 9 Powerful software applications Included with your 01X are a variety of useful plug-ins and software programs to help you get the most out of the mixer and your computer music system. • 01X Channel Module This plug-in software provides at-a-glance control over all Dynamics and EQ processing for an 01X channel.
10 01X Owner’s Manual Application Index This conv enient, easy-to use inde x is divided into general categor ies to help y ou when you want to find inf or ma- tion on a specific topic or function. For inf or mation on the electronic owner’ s manuals (PDF), ref er to the sepa- rate Installation Guide .
01X Owner’s Manual 11 ■ Saving data ● Backing up system data. .....................................................................................................................................BA CKUP ([SHIFT]+[UTILITY] (page 86) ● Saving/recalling/deleting groups of prog rammed settings (Library).
12 01X Owner’s Manual ■ Output ● Outputting only the D AW’ s stereo output to Monitor Out or headphones. ............................................................................. MONITOR (pages 37, 96) ● Outputting only the stereo output of the 01X to Monitor Out or headphones.
01X Owner’s Manual 13 Before Using 14 01X T erminology ................................................... 14 Controls and Connectors ....................................... 16 Connections .......................................................... 23 Setting Up .
14 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Before Using 01X T erminology ■ Attenuator (A TT) After A/D conv ersion, input signals (pre-EQ lev el) can be attenuated using this control.
01X Owner’s Manual 01X T erminology 15 Before Using Basics Section Appendix Getting Started Reference ■ Automation A function by which adjustments of mixer parameters via the knobs and faders are recorded in real time, and are exactly reproduced during playback.
16 Controls and Connectors 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Controls and Connectors •F or details on the functions in the Remote mode, see the Remote Function List (page 104).
01X Owner’s Manual Controls and Connectors 17 Before Using Basics Section Appendix Getting Started Reference e Channel knobs These knobs mainly control the parameter settings/v alues respecti vely assigned to them. The y are also used to exe- cute (YES) or cancel (NO) operation when a confirmation message appears (page 143).
18 Controls and Connectors 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference !6 [REMO TE] button This button selects the Remote mode, enabling you to con- trol D A W (digital audio workstation) software on a con- nected computer (page 23).
01X Owner’s Manual Controls and Connectors 19 Before Using Basics Section Appendix Getting Started Reference @1 [SELECTED CHANNEL] button This button switches between the Selected Channel mode (the lamp lights) and Multi Channel mode (the lamp is of f).
20 Controls and Connectors 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference These buttons are used primarily for controlling song play- back/recording on your D A W software. They also let you control the software no matter which mode is selected, Remote or Internal.
01X Owner’s Manual Controls and Connectors 21 Before Using Basics Section Appendix Getting Started Reference q MIC/LINE INPUT •M IC/LINE INPUT (XLR) jacks 1/2 These are XLR-3-31 type balanced input jacks. The nominal input le vel is -46 to +4 dB. Mics, direct boxes, or line le vel de vices with balanced output jacks can be connected here.
22 Controls and Connectors 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference t mLAN (IEEE 1394) connectors 1/2 For connecting mLAN de vices or IEEE 1394-compatible (FireW ire/i.Link) devices via standard IEEE 1394 (6-pin) cables.
01X Owner’s Manual Connections 23 Before Using Basics Section Appendix Getting Started Reference Connections • Before connecting the 01X to other electr onic components, turn off the power to all the components. Before turning the po wer on or off to all components, set all v olume levels to minim um (0).
24 Setting Up 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Setting Up Make sure that the 01X’ s [ST ANDBY/ON] switch is set to the ST ANDBY (off) position. q Connect one end of the AC cable to the P A-300. w Connect the P A-300’ s DC plug to the 01X’ s DC IN ter- minal on the rear panel.
01X Owner’s Manual 25 Before Using Basics Section Appendix Getting Started Reference Basics Section Over view of the 01X This section giv es you an ov er view of the 01X’ s features . The f ollowing diagram sho ws the various component sections or “blocks” of the 01X: mixer , effects and remote control.
26 Overview of the 01X 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Computer 01X Port 5 Port 4 Port 3 Port 1 Port 2 Acrobat Reader (for PDF Manual) Effect 1 Effe.
01X Owner’s Manual Overview of the 01X 27 Before Using Basics Section Appendix Getting Started Reference Mixer •F or information on the entire signal flow of the 01X, ref er to the Block Diagram (at the end of this o wner’s man ual).
28 Overview of the 01X 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Input channel ● Input channels 1 thr ough 8 These are monaural input channels used mainly for input of microphones or line-le vel instruments.
01X Owner’s Manual Overview of the 01X 29 Before Using Basics Section Appendix Getting Started Reference Stereo input channels 1/2 These are stereo input channels used mainly for inputting the return signal from internal ef fects 1/2.
30 Overview of the 01X 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Output channel ● Stereo output channel This is a stereo output channel that processes the signals sent from each channel to the stereo bus. Stereo f aders con- torl the le vel of these outputs.
01X Owner’s Manual Overview of the 01X 31 Before Using Basics Section Appendix Getting Started Reference Monitor output/headphone output For monitoring purposes, the 01X pro vides MONITOR OUT jacks and a PHONES jack. The MONIT OR OUT jacks and PHONES jack always output the same signal, and is linked to the le vel adjustment.
32 Overview of the 01X 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Remote Control W ith mLAN MIDI transfer , the 01X can be used to conrtol DA W (digital audio .
01X Owner’s Manual Overview of the 01X 33 Before Using Basics Section Appendix Getting Started Reference mLAN Interface The mLAN interface of the 01X also lets you connect MIDI or audio de vices that do not have mLAN connectors or capability .
34 Application examples 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Application examples The 01X is one of the most versatile recording mix ers av ailable.
01X Owner’s Manual Application examples 35 Before Using Basics Section Appendix Getting Started Reference 2) Digital mixer function Here, the 01X functions simultaneously as a front-end/ audio interface for a computer system as well as a fully digital mixer for your sequencer audio tracks.
36 Memory (Librar y) Structure 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Memor y (Librar y) Structure The 01X f eatures sev eral libraries (inter nal memor y) that enable y ou to store Scene, Input P atch, Output P atch and other data.
01X Owner’s Manual Basic Operations 37 Before Using Basics Section Appendix Getting Started Reference Basic Operations In this section, you’ll learn about the structure of the modes of the 01X, its panel display indications and its fun- damental operations .
38 Basic Operations 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference [NAME/V ALUE] [INTERNAL] [REMOTE] [SCENE] [REMOTE] [EQ] [P AN] [D YNAMICS] [SEND] [GROUP] [EFFEC.
01X Owner’s Manual Basic Operations 39 Before Using Basics Section Appendix Getting Started Reference [UTILITY] [UTILITY] [SCENE] [INTERNAL] [REMOTE] [REMOTE] [INTERNAL] [SELECTED CHANNEL] [EFFECT] .
40 Basic Operations 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Layer selection/Channel selection The Input Channels and Output Channels are arranged into layers, as illustrated belo w . There are four layers altogether .
01X Owner’s Manual Basic Operations 41 Before Using Basics Section Appendix Getting Started Reference ● Selected Channel mode To select a channel on the 01X, press the corresponding [SEL] button. The channel is selected and the [SEL] button lamp lights up.
42 Basic Operations 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference r Enter the letters, numbers, or symbols by turning the channel knob [5]. t T urn any of the channel knobs [2] - [4] to mo ve the cur- sor to the position of the next character .
01X Owner’s Manual 43 Before Using Basics Section Appendix Getting Started Reference Getting Started ■ Sound Mixing 101: The Fundamentals Mixing is a skill, but it’ s also an art. Making a good recording and creating a good mix is more than simply plugging in a microphone and moving a couple of f aders.
44 Getting Started 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference ● Clean up sounds Garbage in usually means garbage out.
01X Owner’s Manual Getting Started 45 Before Using Basics Section Appendix Getting Started Reference ● Use Solo and Mute (page 51) When se veral instruments are mixed, it can be dif ficult to make indi vidual judgments about them.
46 Mixing T utorial 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Mixing T utorial • The example displa ys are generally tak en from the V alue mode. • Be sure to enter the INTERNAL mode bef ore you star t the f ollowing tutorial.
01X Owner’s Manual Mixing T utorial 47 Before Using Basics Section Appendix Getting Started Reference With Studio Manager q Follo w the basic procedure above, or at least the first two steps—setting the controls to minimum and con- necting the source(s).
48 Mixing T utorial 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Applying EQ EQ stands for “equalizer” or “equalization” and lets you change the tonal characteristics of the audio. The 01X is equipped with a four-band sweepable parametric EQ, for maximum versatility and control.
01X Owner’s Manual Mixing T utorial 49 Before Using Basics Section Appendix Getting Started Reference r -a From the Selected Channel mode, adjust the desired EQ parameter by turning the corresponding knob . r -b From the Multi Channel mode, press the same EQ button (as in step 2 abo ve) repeatedly to select the desired parameter .
50 Mixing T utorial 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference EQ Library The four-band EQ gi ves you comprehensi ve control ov er the tonal quality of the sound, yet unless you hav e a lot of mixing experience, you may be unsure just ho w and when to use EQ.
01X Owner’s Manual Mixing T utorial 51 Before Using Basics Section Appendix Getting Started Reference Using Mute (On/Off) / Solo Mute and Solo are two simple yet important functions in monitoring your mixes.
52 Mixing T utorial 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Using Dynamics — applying compression, etc. The Dynamics ef fects of the 01X provide useful, powerful w ays to process the sound, both during and after recording.
01X Owner’s Manual Mixing T utorial 53 Before Using Basics Section Appendix Getting Started Reference ● Compressor parameters/ranges Threshold Determines the amount of signal necessar y to tr igger compression.
54 Mixing T utorial 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Dynamics Librar y Here is another handy feature of the 01X that puts the real- world e xperience of professional engineers to work for you.
01X Owner’s Manual Mixing T utorial 55 Before Using Basics Section Appendix Getting Started Reference Panning P an lets you set where the audio of a channel appears in the stereo image.
56 Mixing T utorial 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference r -b From the Multi Channel mode, press the [P AN] but- ton, repeatedly if necessary , to select the Pan parame- ter . Adjust the parameter for each channel with the corre- sponding knob .
01X Owner’s Manual Mixing T utorial 57 Before Using Basics Section Appendix Getting Started Reference 1) Effect send routing The 01X features four separate ef fect send routings: A UX 1, A UX 2, A UX 3 and A UX 4. A UX 1 and 2 are used only for external routing (to your f avorite outboard ef fects, for e xample).
58 Mixing T utorial 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference e Edit the ef fect if desired. Press the DISPLA Y [ ] (Up) button repeatedly to step back through the ef fect parameter pages—Reverb Hall has four of them.
01X Owner’s Manual Mixing T utorial 59 Before Using Basics Section Appendix Getting Started Reference e Press the [SEND] button (se veral times, if necessary) to call up the A UX 3 display below . r Go back to the input channels—press the MIXER/ LA YER [1-8] button.
60 Mixing T utorial 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Using external effects W ith all of the EQ, Dynamics and Effect processing a vail- able within the 01X itself, you can do all your recording and mixing without e ver having the need for an e xternal ef fect unit.
01X Owner’s Manual Mixing T utorial 61 Before Using Basics Section Appendix Getting Started Reference Input and Output Patching W ith all its ins and outs, the 01X is an exceptionally flexi- ble mixer , adaptable to a wide range of applications and setups.
62 Mixing T utorial 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Routing audio to the digital stereo output In the section abov e you learned how to route digital audio into the 01X. In this section, we’ll see ho w to send it back out again.
01X Owner’s Manual Mixing T utorial 63 Before Using Basics Section Appendix Getting Started Reference Routing audio to specific mLAN outputs Y ou can use the following operation to send audio buses to specific mLAN output pairs. For e xample, you can direct the two Aux Out pairs (A UX 1/2, A UX 3/4) to separate mLAN outputs.
64 Mixing T utorial 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Groups Y ou can use the Group features to make mixdown chores easier . For example, if you assign all of your drum chan- nels to the same Fader Group, you can adjust the le vels of all the drums together just by moving one of the f aders.
01X Owner’s Manual Mixing T utorial 65 Before Using Basics Section Appendix Getting Started Reference Creating and Recalling Scenes Scenes are digital “snapshots” of your mixing work. They allo w you to save all settings in a mix—including EQ, Dynamics, Ef fects, Groups, and more—and call them up instantly whene ver you need them.
66 Recording/Playback/Remote Control 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Recording/Playback/Remote Control Y ou’ ve seen how the 01X is a full-featured stand-alone mix er and an exceptionally versatile front-end mix er for recording and mixdo wn with a computer system.
01X Owner’s Manual Recording/Playback/Remote Control 67 Before Using Basics Section Appendix Getting Started Reference e Select “Mackie Control” (or “Y amaha 01X”) from the list and click Add. r Select “Mackie Control” from the “De vices” list, then click on the setup tab .
68 Recording/Playback/Remote Control 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference • Do not select the unnumbered mLAN MIDI port; this corresponds to P or t 1 and is reser v ed for the remote control functions. t Select “ All MIDI Inputs” from the list at left.
01X Owner’s Manual Recording/Playback/Remote Control 69 Before Using Basics Section Appendix Getting Started Reference t If desired, click the Control Panel b utton and adjust the latency (Preferred Buf fer Size). For details on setting the latenc y , refer to the separate Installation Guide.
70 Recording/Playback/Remote Control 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference e From the De vices menu, select “VST Outputs. ” r Acti vate all the outputs buses you intend to use. Click on the [po wer] button to activ ate a desired bus.
01X Owner’s Manual Recording/Playback/Remote Control 71 Before Using Basics Section Appendix Getting Started Reference ● Using multiple mLAN channels In the instructions above , all tracks were routed to a single mLAN output pair . Here, w e’ll see how to assign audio trac ks to different buses (and hence , separate mLAN output pairs).
72 Recording/Playback/Remote Control 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference ● Recording audio In this section, you’ll learn how to record an audio input signal from the 01X to the computer . 1 Connect the instrument or microphone to the 01X and set the le vel(s).
01X Owner’s Manual Recording/Playback/Remote Control 73 Before Using Basics Section Appendix Getting Started Reference Select the Remote setting to match your sequencer q Make sure your computer is on and the mLAN dri ver is acti ve. Refer to the explanation in the separate Installation Guide.
74 Recording/Playback/Remote Control 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Using the transport controls These buttons let you control Cubase in the same w ay as using a tape recorder .
01X Owner’s Manual Recording/Playback/Remote Control 75 Before Using Basics Section Appendix Getting Started Reference Zoom The Zoom controls are another navig ation conv enience. No longer do you hav e to mouse with the zoom sliders or the magnifying glass tool or use the Zoom submenu in the sequencer .
76 Recording/Playback/Remote Control 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Using Mute/Solo First make sure the [A UTO R/W], [SOLO] and [REC RD Y] buttons are off, and use the B ANK [ < / > ] (Left/ Right) buttons (if needed) to call up the desired set of tracks on the 01X.
01X Owner’s Manual Recording/Playback/Remote Control 77 Before Using Basics Section Appendix Getting Started Reference Audio parts — Sample Editor window Y ou can also call up the Sample Editor window for audio parts in the same way .
78 Recording/Playback/Remote Control 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference ■ Operation q Select the desired channel/track. Press the appropriate [SEL] button or use the [ / ] (Up/Do wn) cursor buttons. w Acti vate Read/Write automation.
01X Owner’s Manual Recording/Playback/Remote Control 79 Before Using Basics Section Appendix Getting Started Reference Editing EQ settings In this section, we’ll be making edits to indi vidual tracks again — b ut this time from the Channel Settings window .
80 Recording/Playback/Remote Control 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Editing Effect settings The 01X can also be used to edit the plug-in ef fects in Cubase SX.
01X Owner’s Manual Recording/Playback/Remote Control 81 Before Using Basics Section Appendix Getting Started Reference 2) Adjust the send levels q Select the desired audio channel. Use the [SEL] buttons (and the B ANK [ < / > ] (Left/ Right) buttons, if necessary).
82 Recording/Playback/Remote Control 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Other control features Using the Function buttons The eight Function buttons [F1] - [F8] pro vide a powerful and versatile w ay to customize DA W control and stream- line your recording, editing and mixing work.
01X Owner’s Manual Recording/Playback/Remote Control 83 Before Using Basics Section Appendix Getting Started Reference Undo The [UNDO] button performs the same function as Undo in the sequencer — allo wing you to cancel the last edit made and restore the pre vious condition of the song.
84 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Reference Function T ree/Function List This chart sho ws the names, ranges and explanations of all settable parameters in the Internal mode, listed in order according to the function tree.
01X Owner’s Manual Function T ree/Function List 85 Before Using Basics Section Appendix Getting Started Reference ■ INTERNAL MODE [INTERNAL] Knob Function name/ settings Explanation Prompt Related.
86 Function T ree/Function List 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference m CLEAR This deletes the selected Scene. •Y ou can turn wr ite-protect on f or specific impor tant Scenes that you wish to keep from inadv er tently overwriting or deleting.
01X Owner’s Manual Function T ree/Function List 87 Before Using Basics Section Appendix Getting Started Reference MENU SELECT [UTILITY] (or [UTILITY] in Utility mode) z REMO TE Pressing this jumps to the fi rst page of the Remote Control menu (see below).
88 Function T ree/Function List 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference 3 REMOTE A UT OMA TION SETUP u F ADER TOUCH TIMEOUT 100 msec – ∞ Determines the amount of time that the 01X “waits” for fader movement before turning off automation recording.
01X Owner’s Manual Function T ree/Function List 89 Before Using Basics Section Appendix Getting Started Reference 3 INPUT P A TCH (ST1/2) (Input Channel Stereo 1/2) q NONE, AD1/2 – AD7/8, D .IN/FX1 → STI1 Determines the input signal routing for Stereo Input channels (STI1/2).
90 Function T ree/Function List 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference 5 OUTPUT P A TCH (mLAN OUT CHANNEL) w ST -BUS → 1/2 – 23/24 (17/18 – 23/24 are av ailable in 48kHz/ 44.
01X Owner’s Manual Function T ree/Function List 91 Before Using Basics Section Appendix Getting Started Reference 6 OUTPUT P A TCH (DIGI. ST/A UX OUT PORT) q ST -BUS, RECBUS , A UX1 – 4 → D.
92 Function T ree/Function List 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference n ST ORE An Output Patch is stored to internal memory in the Output Patch Library . Up to 32 Output Patches can be stored. The confirmation prompt can be turned on/off as desired.
01X Owner’s Manual Function T ree/Function List 93 Before Using Basics Section Appendix Getting Started Reference DIO (Digital In/Out) [UTILITY] → Channel knob 4 1D .
94 Function T ree/Function List 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference MIDI [UTILITY] → Channel knob 6 1 STUDIO MANA GER ID u 1 – 8 Determines the Studio Manager ID. This number must match the Console Device ID of the Studio Manager (page 9) when transferring the data.
01X Owner’s Manual Function T ree/Function List 95 Before Using Basics Section Appendix Getting Started Reference 5 mLAN MIDI INFORMA TION z 1 : GENERAL 1 : LOGIC 1 : CUBASE 1 : SONAR 1 : DP (DIGIT AL PER- FORMER) This page is for display only and the parameters cannot be changed here.
96 Function T ree/Function List 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference 4 SOLO MODE u / i MIX SOLO/ LAST SOLO When using the Solo function with the [ON] button ([SOLO] button is on), this determines whether multiple channels can be soloed (MIX SOLO) or only the last selected channel is soloed (LAST SOLO).
01X Owner’s Manual Function T ree/Function List 97 Before Using Basics Section Appendix Getting Started Reference EQ ON/OFF z – , ( z ) ON/OFF T urns the EQ on or off. The LO W -band EQ functions as a high-pass filter when the Q parameter is set to HPF .
98 Function T ree/Function List 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference EQ HIGH-MID FREQUENCY/EQHL-F q – i ( t ) 21.2Hz – 20.0kHz Adjusts the frequency . No EQ LO W Q/EQL-Q q – i ( r ) 10.0 – 0.10 Determines the bandwidth of the EQ processing.
01X Owner’s Manual Function T ree/Function List 99 Before Using Basics Section Appendix Getting Started Reference ■ EQ LIBRAR Y (Common to 4 bands) (Selected Channel onl y) (This can be called up b y pressing the same EQ button twice in a r ow .
100 Function T ree/Function List 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference SEND [INTERNAL] → ([SELECTED CHANNEL]) → [SEND] SEND 1 – 4 (A UX Send Level 1 – 4 ) q – i ( w / y ) - ∞ – +6.0 Determines the Aux Send level of the Input Channels.
01X Owner’s Manual Function T ree/Function List 101 Before Using Basics Section Appendix Getting Started Reference b RECALL F or calling up the selected Dynamics effect. The confirmation prompt can be turned on/off as desired. (See “Recall Confirmation” on page 95.
102 Function T ree/Function List 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference CH P AIR (Channel Pair) q – i ( r ) P AIRED/---- F aders and most parameters of adjacent odd-even channels or Aux buses are linked for stereo operation.
01X Owner’s Manual Function T ree/Function List 103 Before Using Basics Section Appendix Getting Started Reference 1 – 7 EFFECT1/2 P ARAMETER (Effect 2 is 48kHz/44.1kHz mode onl y) z – v (Effect P arameters) Determines the effect parameters. Parameters depend on the Ef fect T ypes selected in the Library (see the Effect Library List).
104 Remote Function List 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Remote Function List •F or information and instructions on setting up the 01X f or remote control, refer to the Getting Started and the section “Demo Song Playbac k/Remote Control Setup” in the separate Installation Guide booklet.
01X Owner’s Manual Remote Function List 105 Before Using Basics Section Appendix Getting Started Reference [F8] ([SA VE] flashes) This cancels the Save operation, when the fi nal confirmation for Sav e appears ([SA VE] flashes). — [SHIFT]+[F1] Brings the T rack V iew windo w to the front of the computer screen.
106 Remote Function List 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference ■ LOGIC: On the 01X, set Remote Select (page 87) in the Utility mode to “LOGIC. ” Button Function LED Notes (page 114) In all modes: [NAME/V ALUE] Changes the indication of the parameter name and its v alue.
01X Owner’s Manual Remote Function List 107 Before Using Basics Section Appendix Getting Started Reference [SA VE] Executes the Sa ve operation. lights [MARKER] T urns the Marker on or of f. — [SHIFT]+[MARKER] Enters the Marker Option mode. — [ r ] Press to continuously re wind.
108 Remote Function List 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference ■ Cubase/NUENDO: On the 01X, set Remote Select (page 87) in the Utility mode to “CUBASE. ” Knobs 1 – 8 (pressing) (P arameter page) Reset the parameter v alue to the default.
01X Owner’s Manual Remote Function List 109 Before Using Basics Section Appendix Getting Started Reference [SHIFT]+[F2] Starts the Mixer V iew windo w ./Brings the Mixer V iew windo w to the front of the com- puter screen. — [SHIFT]+[F3] [SHIFT]+[F3] as defined in Cubase/Nuendo.
110 Remote Function List 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference ■ SONAR: On the 01X, set Remote Select (page 87) in the Utility mode to “SONAR. ” Button Function LED Notes (page 114) In all modes: [NAME/V ALUE] Changes the indication of the parameter name and its v alue.
01X Owner’s Manual Remote Function List 111 Before Using Basics Section Appendix Getting Started Reference [ f ] F orward (or F ast Forward). When the Marker is turned on, this operation mo ves the song position to the next Mark er . — *33 [SHIFT]+[ f ] Mov es the song position to the end of the song.
112 Remote Function List 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference ■ Digital P erformer: On the 01X, set Remote Select (page 87) in the Utility mode to “DP . ” Button Function LED Notes (page 114) In all modes: [SHIFT]+[P AN] Calls up the Mode list display .
01X Owner’s Manual Remote Function List 113 Before Using Basics Section Appendix Getting Started Reference P AN mode [P AN] ( or [SHIFT]+[P AN] ➝ Knob) lights *26 Knobs 1 – 8 (turning) For editing parameters. — Knobs 1 – 8 (pressing) (Surround Audio Channel) Enters the P ANNER Ef fect Edit mode.
114 Remote Function List 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference *1 The normal condition is when the [A UTO R/W], [SOLO] and [REC RD Y] button lamps are of f. *2 Not used or operable for the Master channel. *3 The Multi Part Editor must be selected as the MIDI editor in SQ01 V2.
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 115 Appendix Parameter Lists ■ Preset EQ Library 21 A. G. Stroke 2 A v ariation on preset 20. Y ou can also use it with an acoustic-electric nylon string guitar. 22 A.
Before Using Basics Section Appendix Getting Started Reference 116 01X Owner’s Manual Parameter Lists ■ Preset EQ P arameters/V alues No. Title Parameter LO W LOW -MID HIGH-MID HIGH 01 Bass Drum 1 PEAKING PEAKING PEAKING H.SHELF G +3.5 dB –3.5 dB 0.
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 117 Parameter Lists 25 Male V ocal 1 PEAKING PEAKING PEAKING PEAKING G –0.5 dB 0.0 dB +2.0 dB +3.5 dB F 190 Hz 1.00 kHz 2.00 kHz 6.70 kHz Q 0.11 4.5 0.56 0.11 26 Male V ocal 2 PEAKING PEAKING PEAKING H.
Before Using Basics Section Appendix Getting Started Reference 118 01X Owner’s Manual Parameter Lists No. Preset Name Type Description 1 Comp COMP Compressor for reducing the o verall v ol- ume lev el. Use it on the stereo output during mixdown, or with paired Input or Output Channels.
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 119 Parameter Lists ■ Preset Dynamics P arameters/V alues (fs=44.1kHz) No. Title T ype Parameter V alue 1 Comp COMP Threshold (dB) –8 Ratio ( :1) 2.5 Attack (ms) 60 Out gain (dB) 0.
Before Using Basics Section Appendix Getting Started Reference 120 01X Owner’s Manual Parameter Lists 21 Strings3 COMP Threshold (dB) –17 Ratio ( :1) 1.5 Attack (ms) 76 Out gain (dB) 2.5 Knee 2 Release (ms) 186 22 BrassSection COMP Threshold (dB) –18 Ratio ( :1) 1.
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 121 Parameter Lists ■ Dynamics P arameters Compressor Threshold –54 dB–0 dB (0.1 dB step) Ratio (x :1) x=1, 1.1, 1.3, 1.5, 1.7, 2, 2.5, 3, 3.5, 4, 5, 6, 8, 10, 20, ∞ (16 points) Out gain 0 dB to +18 dB (0.
Before Using Basics Section Appendix Getting Started Reference 122 01X Owner’s Manual Parameter Lists Explanations for Dynamics P arameters ● Compressor (CMP) parameters: Threshold (THRESH) deter mines the lev el of input signal required to trigger the compressor .
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 123 Parameter Lists ● Expander (EXP) parameters: Threshold (THRESH) deter mines the lev el of input signal required to trigger the expander . Signals abo ve the threshold pass through unaffected.
Before Using Basics Section Appendix Getting Started Reference 124 01X Owner’s Manual Parameter Lists ● Gate (GA T) and Ducking (DUK) parameters: Threshold (THRESH) sets the lev el at which the gate closes, cutting off the signal. Signals abov e the threshold lev el pass through unaffected.
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 125 Parameter Lists ■ Preset Effects Library ● Reverbs ● Delays ● Modulation-based Effects ● Guitar Effects ● Dynamic Effects ● Combination Effects ● Others No.
Before Using Basics Section Appendix Getting Started Reference 126 01X Owner’s Manual Parameter Lists ■ Effects P arameters ● REVERB HALL, REVERB ROOM, REVERB ST A GE, REVERB PLA TE One input, two output hall, room, stage, and plate re verb sim ulations, all with gates.
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 127 Parameter Lists ● MONO DELA Y One input, two output basic repeat dela y . ● STEREO DELA Y Tw o input, two output basic stereo dela y . ● MOD . DELA Y One input, two output basic repeat dela y with modulation.
Before Using Basics Section Appendix Getting Started Reference 128 01X Owner’s Manual Parameter Lists ● ECHO Tw o input, two output stereo dela y with crossed feedbac k loop. ● CHORUS Tw o input, two output chorus effect. ● FLANGE Tw o input, two output flange eff ect.
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 129 Parameter Lists ● SYMPHONIC Tw o input, two output symphonic eff ect. ● PHASER Tw o input, two output 16-stage phaser . ● A UT O P AN Tw o input, two output autopanner .
Before Using Basics Section Appendix Getting Started Reference 130 01X Owner’s Manual Parameter Lists ● HQ. PITCH One input, two output high-quality pitch shifter . ● DU AL PITCH Tw o input, two output pitch shifter . ● ROT A R Y One input, two output rotary speaker simulator .
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 131 Parameter Lists ● MOD . FIL TER Tw o input, two output modulation filter . ● DIST ORTION One input, two output distor tion eff ect. ● AMP SIMULA TE One input, two output guitar amp simulator .
Before Using Basics Section Appendix Getting Started Reference 132 01X Owner’s Manual Parameter Lists ● D YNA. FLANGE Tw o input, two output dynamically controlled flanger . *1. 6ms – 46.0s (fs=44.1kHz), 5ms – 42.3s (fs=48kHz), 3ms – 23.0s (fs=88.
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 133 Parameter Lists ● REV ->CHORUS One input, two output re verb and chorus effects in series. ● REV+FLANGE One input, two output re verb and flanger eff ects in parallel.
Before Using Basics Section Appendix Getting Started Reference 134 01X Owner’s Manual Parameter Lists ● REV+SYMPHO . One input, two output re verb and symphonic eff ects in parallel. ● REV ->SYMPHO. One input, two output re verb and symphonic eff ects in series.
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 135 Parameter Lists ● DELA Y+ER. One input, two output dela y and ear ly reflections eff ects in parallel. ● DELA Y->ER. One input, two output dela y and ear ly reflections eff ects in ser ies.
Before Using Basics Section Appendix Getting Started Reference 136 01X Owner’s Manual Parameter Lists ● DELA Y->REV One input, two output dela y and rev erb effects in series. ● DIST ->DELA Y One input, two output distor tion and dela y effects in series.
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 137 Parameter Lists ● ST REVERB Tw o input, two output stereo re verb . ● M.B AND D YNA. Tw o input, two output 3-band dynamics processor , with individual solo and gain reduction meter ing for each band.
Before Using Basics Section Appendix Getting Started Reference 138 01X Owner’s Manual Parameter Lists ■ Scene Memory to Program Change T able Program Change No.
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 139 Parameter Lists ■ Input P atch P arameters * Each display ma y differ depending on the channel name (Studio Manager) settings . : Disabled when Wordcloc k is set to 96kHz/88.
Before Using Basics Section Appendix Getting Started Reference 140 01X Owner’s Manual Parameter Lists ■ Output P atch P arameters * Each display ma y differ depending on the channel name (Studio Manager) settings . : Disabled when Wordcloc k is set to 96kHz/88.
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 141 MIDI Data Format MIDI Data Format 1. P or ts The mLAN MIDI por ts 1, 4 and 5 are used to communicate via MIDI with the 01X.
Before Using Basics Section Appendix Getting Started Reference 142 01X Owner’s Manual MIDI Implementation Chart MIDI Implementation Chart YAMAHA [DIGITAL MIXING STUDIO] Date : May/28,2003 Model:01X MIDI Implementation Chart Version : 1.0 Transmitted Recognized Remarks Function.
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 143 Display Messages Display Messages Messages Information *** SURE? This prompt asks if you want to e xecute the oper ation, or change the setting (Final confir mation).
Before Using Basics Section Appendix Getting Started Reference 144 01X Owner’s Manual T roubleshooting T roubleshooting No sound? Wrong sound? When a problem like this occurs , please check the f ollowing points bef ore assuming that the product is f aulty .
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 145 T roubleshooting • Is the number of audio channels appropriate? The amount of audio channels that can be used simultaneously differs depending on the computer capacity and speed.
Before Using Basics Section Appendix Getting Started Reference 146 01X Owner’s Manual T roubleshooting ■ P airing was specified, but the signal phase does not match. •E v en when channels are paired, the phase setting is not linked. ...........
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 147 T roubleshooting • There may be a limit on the IEEE 1394 interface of your com- puter as to the number of ports that can be used simultaneously . Check how man y ports can be used simultaneously .
Before Using Basics Section Appendix Getting Started Reference 148 01X Owner’s Manual T roubleshooting To change mLAN settings, select [Start | (All) Programs | Start Up], then start mLAN Manager . • (When a message such as “file cannot be found” appears when uninstalling:) T ry executing the installation once more, then uninstall again.
Before Using Basics Section Appendix Getting Started Reference 01X Owner’s Manual 149 Specifications Specifications ■ General Specifications Sampling Frequency Internal, Exter nal Nor mal rate: 44.1 kHz (-10 %) – 48 kHz (+6 %) Double rate: 88.
Before Using Basics Section Appendix Getting Started Reference 150 01X Owner’s Manual Specifications ■ Input/Output Specifications ■ Control ■ Others * Specifications and descriptions in this owner’ s manual are for information purposes only .
01X Owner’s Manual 151 Before Using Basics Section Appendix Getting Started Reference Numerics 01X Channel Module (Basics Section) ...................................... 28 A About This Manual ........................................................
152 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Index F F1 - F8 (Function 1 - 8) buttons ................................................. 19 Factory Set (Restore Factory Defaults) (Basics Section) ........... 42 FADER GROUP .
01X Owner’s Manual 153 Before Using Basics Section Appendix Getting Started Reference Index N NAME/VALUE button .............................................................. 17 Nominal level (01X Terminology) .......................................
154 01X Owner’s Manual Before Using Basics Section Appendix Getting Started Reference Index SQ01 V2 ....................................................................................... 9 SQ01 V2 (Remote Function List) ............................
AUX1(...4) DIGITAL STEREO IN R DIGITAL STEREO IN L (to MONITOR CASCADE) INPUT 1(...8) ST IN 1(...2) STEREO L +48V ATT ATT INSERT RECBUS (BUS) L RECBUS (BUS) R STEREO (STEREO BUS) L STEREO (STEREO BUS) R AUX 1 AUX 2 AUX 3 (FX1) AUX 4 (FX2) PAN PAN OSCILLATOR AUX PAN LEVEL PRE/POST ON Mono in X 8 ON AUX PAN LEVEL PRE/POST ON Mono in X 16 (96kHz/88.
For details of products, please contact your nearest Y amaha representativ e or the authorized distributor listed belo w . Pour plus de détails sur les produits, v euillez-vous adresser à Y amaha ou au distributeur le plus proche de v ous figurant dans la liste sui vante.
デバイスYamaha 01Xの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Yamaha 01Xをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはYamaha 01Xの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Yamaha 01Xの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Yamaha 01Xで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Yamaha 01Xを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はYamaha 01Xの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Yamaha 01Xに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちYamaha 01Xデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
