YamahaメーカーAR-100の使用説明書/サービス説明書
ページ先へ移動 of 180
.
SPECIAL MESSA GE SECTION PRODUCT SAFETY MARKINGS: Yamaha electronic products may have either labels similar to the graphics shown below or molded / stamped facsimiles of these graphics on the enclosure. The explanation of these graphics appears on this page.
IMPOR T ANT SAFETY INSTR UCTIONS INFORMATION RELATING TO PERSONAL INJURY, ELECTRICAL SHOCK, AND FIRE HAZARD POSSIBILITIES HAS BEEN INCLUDED IN THIS LIST. WARNING- When using any electrical or electronic product, basic precautions should always be followed.
FCC INFORMA TION (U .S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
• Do not rest your weight on, or place heavy objects on the instrument, and do not use excessive force on the buttons, switches or connectors. • Take care that the key cover does not pinch your fingers, and do not insert a finger or hand in the key cover gap.
C ongratulations and thank y ou f or purchasing the Y amaha A R-100 Electone! The AR-1 00 combines the most adv anced and natural-sounding A WM tone generation technology with state-of-the-art digital electronics and features to giv e you stunning sound quality with maximum musical enjo yment.
1 Introductory Guide Voice Sections Flute/Tibia and Extra Voice Voice Controls and Effects Styles (Rythm and Accompaniment) Registration Memory Music Disk Recorder Voice Edit Accompaniment Program Sequence Program Footswitches and Knee Lever Accessory Jacks and Controls Pitch Control MIDI Appendix 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 7.
2 ) MENU buttons ............................P . 11 ! P A GE buttons ..............................P . 11 @ CONTRAST dial ..........................P . 14 # Liquid Cr ystal Displa y (LCD) ......P . 11 $ BAR/BEA T DISPLA Y ..................P . 46 % TEMPO buttons .
3 º FLUTE/TIBIA and EXTRA V OICE-UPPER ..P . 26 ¡ D A T A CONTR OL buttons ............P . 11 ™ COARSE b utton ..........................P . 14 £ ENSEMBLE buttons ....................P . 15 ¢ TRANSPOSE buttons ................P . 161 ∞ ORGAN V ARIA TION b utton .
4 M ain F eatures Y our Y amaha AR -1 00 Electone is packed with many sophisticated functions , yet is amazingly easy to use . The main features are briefly described here (along with page references) so that you can quickly understand the capabilities of the Electone .
Accompaniment Program and Sequence Program The pow erful Accompaniment Program function lets y ou create your o wn User Styles (accompaniment patterns) — including drum/percussion, bass , chord, pad and phrase parts. Each Style you create can ha ve different Intro, Main A and B, Fill In, and Ending patterns .
6 1. Introductory Guide Introductory Guide Wh eth er you are an adv anced Electone performer or ha ve nev er touched an electronic keyboard in your life , w e recommend that you take th e time to go through this basic section. It sho ws y ou in the simplest possible manner h ow to start pla ying your AR -1 00.
7 1. Introductory Guide 3. Set the MASTER V OLUME control. The MASTER V OLUME control is an ov erall control which affects the volume of the entire instrument.
8 1. Introductory Guide Pla ying the Demo Songs Before you start pla ying your new AR -1 00, you’ll probably w ant to hear what the instrument is truly capable of doing. F or this purpose , the AR-1 00 features a variety of special Demo Songs that sho wcase the dynamic V oices and Styles of the instrument.
9 1. Introductory Guide R egistration Menu The next place to continue y our explorations of the AR -1 00 is the R egistration Menu. This section features a total of 384 preset R egistrations, created to suit a wide v ariety of music styles. Y ou’ve already heard some of these R egistrations in action when you listened to the special Demo Songs .
10 1. Introductory Guide 2. Select the desired R egistration from the display with the appropriate Data Control button. Each R egistration Menu button selection calls up a menu of up to 16 R egistrations. Press the Data Control button that corresponds to the R egistration you wish to pla y .
11 1. Introductory Guide U sing the Display and R elated C ontrols As you’v e seen in the sections abov e, the AR -1 00 features an exceptionally large and eas y-to- understand displa y . It provides comprehensiv e at-a-glance information on all current settings , and gives y ou convenient, intuitiv e control ov er the AR-1 00’s functions .
12 1. Introductory Guide 2. Let’s take a look at some other w ay s the Data Control buttons are used. Press the STRINGS button in the UPPER KEYBOARD V OICE 1 section twice (or repeatedly until the display belo w appears). Use the Data Control buttons belo w each section in the displa y to change the corresponding settings.
13 1. Introductory Guide H elp Messages Before you go on to use some of the other features of the AR -1 00, you should explore the Help messages. This conv enient function provides a comprehensiv e yet concise “on-line” guide co vering all AR-1 00 operations and features .
14 1. Introductory Guide 3. Select the desired Help Menu section. Press the MENU button corresponding to the desired subject. Each Menu section co vers a different subject (or group of functions) of the AR -1 00, and each has several “screens” Y ou can also scroll through the entire set of Help Menus b y using the P AGE buttons .
15 2. Voice Sections V oice S ections Th e AR -1 00 features a total of 2 05 realistic, high-quality A WM V oices . There are fiv e V oice sections for the Upper keyboard, four V oice sections for the Lo wer keyboard, and four V oice sections for th e Pedalboard.
16 2. Voice Sections 3. Press the Data Control button corresponding to the voice y ou wish to select. The name of the selected V oice appears at the top of the displa y . In this case , Pop Organ is shown. Some V oices (such as Organ and Guitar) hav e two pages of V oices.
17 2. Voice Sections Coarse: Use the touch controls at the right of each V oice section on the panel to set the desired lev el for each V oice . The controls ha ve sev en volume settings , from a minimum of 0 (MIN) to a maximum of 24 (MAX). (The lamps on the controls light to indicate the v olume .
18 2. Voice Sections 6. Now select V oices for the Low er keyboard and Pedalboard as y ou did for the Upper keyboard abov e . Also set the volumes of the V oices . 7. Adjust the v olume balance between the Upper and Low er V oices with the MANUAL B ALANCE touch control.
19 2. Voice Sections S electing V oices from the Dotted Buttons The AR-1 00 has a wide v ariety of V oices from which you can choose — far greater than what is immediately apparent from the front panel controls .
20 2. Voice Sections 3. Select a specific V oice Menu (GUIT AR, for example) by pressing corresponding Menu button. Each page represents a general V oice category and the category title appears in the dark bar at the top of the menu when the page has been selected.
21 2. Voice Sections T o select User V oices: Select the USER V oice Menu (by the same method abo ve) when y ou wish to pla y V oices that you’v e created in V oice Edit (see page 1 14). V oice M enus / V oice List The following list sho ws the V oice categories and the a vailable V oices.
22 2. Voice Sections NewAge Pad1 NewAge Pad2 Warm Pad Cosmic Pad Poly- synth Waspy Synth. Bright- ness Sci-Fi Sound- track Sea- shore Bird Tweet App- lause Vibra- phone Soft Vibes Gloc- ken. Celesta Music Box Kalimba Chry- soglott Rep. Marimba Marimba Xylo- phone Chime Synth.
V oice Displa y The V oice Display is the “home” or default displa y for the AR-1 00 and provides at-a-glance information on some of the most important settings for the instrument. These include: • Current V oice selections for each V oice section.
MANUAL V OLUME P age 1 LO WER 1 and 2 2 UPPER 1 and 2 3 LEAD 4 MANUAL B ALANCE This determines the o verall balance betw een the Upper and Low er Keyboard lev els. MANUAL B ALANCE is shown as a slider graphic; higher slider settings make the Upper V oices relatively louder , while low er settings make the Lo wer V oices relativ ely louder .
2 PEDAL Controls • 1, 2 These determine the v olume of each Pedal V oice section. These can also be set from the re- spective panel touch controls . 3 PEDAL B ALANCE This determines the lev el of the Pedal V oice sections. PED AL BALANCE is sho wn as a slider graphic; higher slider settings make the P edal V oices louder .
26 3. Flute/Tibia and Extra Voices Flute/T ibia and Extra V oice Th e Flute/Tibia and Extra V oice sections provide a v ariety of popular and traditional organ sounds. Used together or separately , they giv e you th e sounds and the conv enient, intuitiv e control found on conventional organs .
27 3. Flute/Tibia and Extra Voices 2. Select one of the Organ V ariations: Theatre , Jazz, Electronic, or Classical. Press the ORGAN V ARIA TION button. This calls up the FLUTE and EXTRA V OICE pages (shown belo w). Each successive press of the button selects a different Organ V ariation.
28 3. Flute/Tibia and Extra Voices 4. Turn the T remolo effect on or off for the Flute V oices, if desired. Also set the Flute V olume and Click V olume as needed. EFFECT This turns T remolo on or off for the Flute/Tibia V oices. (As with the other V oice sections, this enables T remolo.
29 3. Flute/Tibia and Extra Voices S etting A ttac k/Chiff (Upper Keyboard onl y) Attack/Chiff is a special set of footages for the Upper K eyboard that produces a percussiv e sound, like that on conv entional organs. The length of the percussiv e sound is also adjustable .
30 3. Flute/Tibia and Extra Voices 3. Press one of the buttons in one of the Extra V oice sections. This turns on the selected V oice (the button’s lamp lights) and automatically calls up the FLUTE V OICE and EXTRA V OICE pages. 4. Add other V oices by pressing other buttons in the appropriate EXTRA V OICE sections.
31 3. Flute/Tibia and Extra Voices 5. From the EXTRA V OICE page , make additional settings for the Extra V oices. The EXTRA V OICE page automatically appears when you press one of the EXTRA V OICE buttons, except when the FLUTE V OICE page is active — in which case y ou can use the P AGE buttons to select the EXTRA V OICE page .
32 4. Voice Controls and Effects V oice C ontrols and Eff ects Th e AR -1 00 features two general kinds of functions that can be used to control or change th e sound of the V oices: V oice controls and effects .
33 4. Voice Controls and Effects T o change the desired V oice control or effect setting, select the appropriate page: • For T ouch T one , Feet, Effect On/Off/T ype (Tremolo, Symphonic, Dela y , and Flanger), P an, Brilliance , V olume, and Vibrato —Select the V oice Condition pages (see below).
34 4. Voice Controls and Effects • INITIAL T ouch Controls volume and timbre according to the v elocity at which you pla y the keys . The harder you strike the key s, the greater the v olume and the brighter the timbre will become .
35 4. Voice Controls and Effects VIBRA T O Page Select the Vibrato page b y pressing the corresponding Menu button. The Vibrato page for the Lead V oice section has additional Slide and T une settings (unlike that of the Upper and Lo wer sections). The P edal V oice sections ha ve no Vibrato page .
36 4. Voice Controls and Effects 4 TUNE (Lead V oices only) Determines the pitch of the Lead V oice . This control lets you detune the Lead V oice relative to the other V oices of the AR-1 00, for producing a richer sound. The higher the v alue, the higher the pitch.
37 4. Voice Controls and Effects Eff ect Set P ages T urning On the Eff ects Before you can w ork with the effects in the Effect Set pages, y ou must first turn on the desired effect in the V oice Condition page .
38 4. Voice Controls and Effects DELA Y & FLANGER Page 1 DELA Y Delay is a pronounced echo effect, with distinct dela yed repeats of the original sound. • Note V alue Determines the Dela y time as a note value , to ensure that the Dela y repeats in sync with the Style tempo.
39 4. Voice Controls and Effects P anel-selectable Eff ects — T remolo, Sustain, and R everb The R everb , Sustain, and Tremolo pages are called up b y pressing the respective panel buttons , then selecting the menu with the bottom left Menu button.
40 4. Voice Controls and Effects Setting the Tremolo Effect Settings for the T remolo effect are made from the TREMOLO & SYMPH. (Symphonic) page . 1 TREMOLO Determines the type of T remolo effect. These types ha ve been programmed to match the corresponding type of organ sounds: Jazz, R ock, Theatre (THEA T .
41 4. Voice Controls and Effects R everb R everb adds an echo-like effect to the sound, giving the impression of a performance in a large room or concert hall. The effect can be applied equally and simultaneously to all V oices, or set individually for each section of the AR -1 00, even independently for rh ythm, accompaniment and effects.
42 4. Voice Controls and Effects REVERB — V OICE GROUP P age V oice Section (LO WER 1, 2; UPPER 1, 2; LEAD; PEDAL 1, 2; ORGAN) Determines the amount of R everb applied to each of the V oice sections: Low er 1 and 2, Upper 1 and 2, Lead, P edal 1 and 2, and Organ (Flute/Tibia).
43 4. Voice Controls and Effects Sustain The Sustain effect, selectable for the Upper , Low er , and Pedal V oices, causes the sound to gradually fade out when the key s are released. The Sustain on/off and length settings are independent for each keyboard, pro viding maximum expressiv e control.
LENGTH (LO WER, UPPER, PEDAL) Determines the length of Sustain applied to each keyboard. The displa y show s the current Sustain length v alues for each keyboard.
45 5. Styles (Rhythm and Accompaniment) St yles (Rh ythm and A ccompaniment) Th e Style section pro vides realistic rhythm patterns — with actual drum and percussion sounds — and automatic accompaniment to back y our performance .
46 5. Styles (Rhythm and Accompaniment) 3. Before starting the Style , make sure that the V olume and T empo settings are appropriate . V olume Settings Use the RHYTHM touch control to adjust the drum/percussion v olume , and use the BASS/CHORD touch control to adjust the v olume of the bass and chord accompaniment.
47 5. Styles (Rhythm and Accompaniment) 4. Start the Accompaniment. Y ou can start the Accompaniment in sev eral different wa ys from the A CCOMP ANIMENT CONTROL buttons: Straight Start: Select the desired Style section, Main A or Main B (b y pressing the appropriate button, MAIN A or MAIN B), then press the ST ART button.
48 5. Styles (Rhythm and Accompaniment) T o use Synchro Start: • First, press the SYNCHRO ST ART button. This puts the Style in stand-b y . (The BAR/BEA T indicator abo ve the TEMPO displa y flashes at the current tempo.) • Next, play a note or chord on the Lo wer keyboard (or a note on the P edalboard).
49 5. Styles (Rhythm and Accompaniment) 5. Select Sections, if desired. Y ou can switch between the tw o Style Sections, Main A and Main B, as the A ccompaniment is playing b y pressing the appropriate button, MAIN A or MAIN B . 6. Select Fill In patterns, if desired.
50 5. Styles (Rhythm and Accompaniment) A bout the St yle S ections Each Style has a total of ten sections , as illustrated below . The FILL T O A button plays a one-measure Fill In and goes to the Main A pattern. The FILL T O B button plays a one-measur e Fill In and goes to the Main B pattern.
51 5. Styles (Rhythm and Accompaniment) Style Condition Page The Style Condition page pro vides fine controls o ver Rh ythm volume and Bass/Chord v olume and allow s you to turn each accompaniment part on or off.
52 5. Styles (Rhythm and Accompaniment) S electing Styles from the Dotted Buttons The Style section, like the V oice sections, also has dotted buttons from which additional Styles can be selected.
53 5. Styles (Rhythm and Accompaniment) 3. Select a specific Style Menu by pressing corresponding Menu button. Each page represents a general Style category and the category title appears in the dark bar at the top of the menu when the menu has been selected.
54 5. Styles (Rhythm and Accompaniment) T o select User Styles: Select the USER Style Menu (b y the same method abo ve) when y ou wish to play Styles that you’v e created in the Accompaniment Program function (see page 122).
55 5. Styles (Rhythm and Accompaniment) A utomatic A ccompaniment — A uto Bass Chord The Auto Bass Chord (A.B .C.) function w orks with the Style section of the AR-1 00 to automatically produce chord and bass accompaniment as y ou play .
56 5. Styles (Rhythm and Accompaniment) Selecting “ A.B .C. Menu” calls up the following displa y , from which you can make A.B .C. settings: M ode Off The Off mode automatically produces chord accompaniment for chords pla yed in the Lo wer keyboard.
57 5. Styles (Rhythm and Accompaniment) Single Finger Mode Chords Chord Cancel Chord Cancel allo ws y ou to instantly turn off the chord and bass accompaniment, and hav e the rhythm pattern continue . This lets y ou create dynamic rhythm “breaks” in y our performance .
Fingered Mode Chords 58 5. Styles (Rhythm and Accompaniment) C Major* Minor* Seventh* Minor seventh Major seventh flatted fifth Sixth Minor sixth Major seventh* Suspended fourth Augmented Diminished* .
59 5. Styles (Rhythm and Accompaniment) M emory Memory allo ws y ou to have the bass and/or chord accompaniment continue ev en after y ou release your fingers from the Lo wer keyboard and/or P edalboard. For more information on the Memory settings and ho w they function with the different A.
60 5. Styles (Rhythm and Accompaniment) About the A.B .C. Modes and Memory Settings The automatic accompaniment functions in different w ays depending on the selected A.B .C. mode and the Memory setting. The chart belo w details how the automatic accompaniment functions for the v arious setting combinations when Synchro Start is on.
61 5. Styles (Rhythm and Accompaniment) Disabling A ccompaniment Changes (Disable) This function allo ws y ou to maintain the same Style and its tempo, even when y ou change R egistrations. T o do this, press the D. (Disable) button in the A UTO BASS CHORD section (or the D.
62 5. Styles (Rhythm and Accompaniment) 2. Set the volume . The volume of the percussion sounds is set together with that of the rh ythm v olume from the RHYTHM touch control. 3. Turn off the Lo wer and/or P edal V oices by turning each V oice section off in the ENSEMBLE section.
63 5. Styles (Rhythm and Accompaniment) P reset P ercussion A ssignments for the Lower K eyboard P reset P ercussion A ssignments for the P edalboard Floor Tom H Floor Tom L Snare H Snare M Bass Drum .
64 5. Styles (Rhythm and Accompaniment) U ser K eyboard P ercussion A total of 72 different percussion sounds can be assigned to an y key or pedal, and your original setups can be sa ved to tw o memory locations: User 1 and User 2. (For this example , use User1.
65 5. Styles (Rhythm and Accompaniment) 2. Select the User mode with the appropriate Data Control button. 3. Select the ASSIGN page by pressing the appropriate Menu button. ASSIGN Page 4. Select the desired instrument category (Cymbal/Hi-Hat, Snare Drum, etc.
66 5. Styles (Rhythm and Accompaniment) Clear The Clear function lets y ou erase one or all instrument/key assignments . T o erase a single instrument assignment: Simultaneously hold down the Data Control button corresponding to CLEAR and press the key or pedal corresponding to the instrument you wish to erase .
67 5. Styles (Rhythm and Accompaniment) Though two User Keyboard Percussion setups can be created, they cannot be memorized to Registration Memory. Only on/off data and the Keyboard Percussion Mode are memorized to Registration Memory. However, User setups can be saved to and loaded from floppy disk.
68 5. Styles (Rhythm and Accompaniment) Other U ser K eyboard P ercussion F unctions Additional operations in the User Mode include cop ying of Low er/Pedal Preset K eyboard Percussion to User 1 or 2, and cop ying from one User location to the other .
69 5. Styles (Rhythm and Accompaniment) 3. At the prompt, select “OK” to cop y the data, or “Cancel” to abort the operation. Use the appropriate Data Control buttons . When the operation is finished, a “Completed” message momentarily appears in the displa y .
70 5. Styles (Rhythm and Accompaniment) M elody On Chord The Melody On Chord (M.O .C.) feature automatically adds a harmon y part to the melodies you pla y on the Upper keyboard. The harmon y is derived from the chords y ou play on the Lo wer keyboard — or from the chords that y ou indicate when using A uto Bass Chord (see page 55).
71 5. Styles (Rhythm and Accompaniment) L.M. Split This function lets y ou assign different V oices to the left and right sides of the Low er keyboard, split at a user-determined key . This effectively giv es you a “third” keyboard, letting y ou play different V oices from the left and right sides of the keyboard.
3. Change the Key Set setting, if needed. T o do this , simultaneously hold do wn the appropriate Data Control button and press the desired key on the Lo wer keyboard. Y ou can also use the Data Control buttons corresponding to SPLIT KEY in the displa y to change the Split setting: 4.
73 6. Registration Memory R egistration M emory R egistration Memory allow s you to store virtually all th e settings you make on th e panel and LCD, providing a conv enient wa y to instantly change all V oice settings and Styles while y ou’re playing, with the simple touch of a single button on th e R egistration Memory panel.
74 6. Registration Memory S electing Registrations Simply press the appropriate numbered R egistration Memory button. S aving Registration Data to Disk Y ou can sav e up to 40 sets of your o wn registrations (each with 16 registrations) on a flopp y disk.
75 6. Registration Memory 2. Select a song number with the SONG SELECT buttons in the Music Disk R ecorder (M.D.R.) section. Y ou can also use the SONG SELECT controls in the displa y by pressing the appropriate Data Control buttons . There are 40 songs , or memory locations, a vailable on a single disk.
76 6. Registration Memory R egistration Shift The R egistration Shift function allow s you to change all R egistrations — the settings y ou make on the panel and LCD — without taking y our hands from the keyboards .
77 6. Registration Memory 3 JUMP In the Jump mode , pressing the right footswitch selects a specific R egistration. With JUMP selected in the displa y , use the Data Control buttons to select the desired R egis- tration number .
78 6. Registration Memory 2. Select the EDIT page with the Menu button. 1 POSITION Mov es cursor to the first position. Mov es cursor one step to the left. Mov es cursor one row up. Mov es cursor one row do wn. Mov es cursor to the last position. Mov es cursor one step to the right.
79 6. Registration Memory Select “OK” to clear all data (a “Completed!” message momentarily appears follo wed b y the previous displa y), or select “Cancel” to abort. R egistration numbers cannot be entered beyond the R egistration Shift function’ s capacity of 80.
80 6. Registration Memory R ecall P anel F unction T urning the Electone off erases all panel settings you have made . If you have made panel settings you wish to keep, save them to R egistration Memory bef ore turning the Electone off. Y ou can, however , recall the panel settings that wer e made before the Electone was last turned off.
81 6. Registration Memory Initial R egistration The Initial R egistration function lets you reset (initialize) all of the R egistration Memory buttons to the original factory settings , without affecting any of the current panel settings .
Calling Up Individual Factory Preset R egistrations (for each R egistration Memory button) 1. Press one of the sixteen ORCHESTRAL PRESET buttons in the REGISTRA TION MENU section. “Initial R egist #” appears at the left side of the display . Each button corresponds to a different numbered R egistration Memory button (as shown belo w).
83 7. Music Disk Recorder Music Disk R ecorder Th e Music Disk R ecorder (M.D.R.) is a sophisticated recording device built into th e AR-1 00 that lets you record y our performances and R egistration settings.
84 7. Music Disk Recorder Cleaning the Disk Driv e R ead/W rite Head Clean the read/write head regularly . This instrument emplo ys a precision magnetic read/write head which, after an extended period of use , will pick up a lay er of magnetic particles from the disks used that will ev entually cause read and write errors .
85 7. Music Disk Recorder F ormatting a Disk Before recording y our performance to a blank disk, the disk must first be formatted. (A blank 2DD floppy disk has been included with y our AR-1 00.) T o format a disk: 1. Put the disk, label facing up, into the disk slot.
86 7. Music Disk Recorder Select “DISK FORMA T” with the appropriate Data Control button. 2. At the prompt, select “OK” to begin formatting, or “Cancel” to abort the operation. When the REMAIN section in the displa y reaches “00 1,” formatting is completed, and the CONTROL P ANEL page is automatically called up.
87 7. Music Disk Recorder Overview of M.D.R. Operation Though the M.D.R. is as easy to oper ate as a cassette tape recor der , it is f ar move versatile .
88 7. Music Disk Recorder R ecording T o record a song: 1. Set the desired R egistrations on the Electone . Make all the settings necessary for the song y ou will record. This includes entering all the R egistrations you will need during the performance to R egistration Memory .
89 7. Music Disk Recorder 4. Use the SONG SELECT buttons (or the corresponding controls in the display) to select the song number for recording. 5. Press the REC button (or select the corresponding control in the display). The REC button lamp lights and the PLA Y button flashes to indicate that record is set to standb y .
90 7. Music Disk Recorder 7. After the elapsed recording time appears on both display s, begin pla ying. There is a slight pause for setup, during which the M.D.R. records R egistration and other data. Once the setup operation is complete , the elapsed recording time (starting at 00:00) appears in both the M.
91 7. Music Disk Recorder 8. When you finish pla ying, press the STOP button. The DISK IN USE lamp lights intermittently while the data is being completely recorded. When recording is completed, the M.D.R. returns to normal stop status and the new song is automatically named “SONG 1.
92 7. Music Disk Recorder R ecording P arts S eparately Y ou can also record the parts of your performance independently . For example , you can first record the chords and bass to the song (using the Lo wer and Pedalboard), and after that record the melody .
93 7. Music Disk Recorder T o change the status for each part, press the appropriate Data Control button in the upper row , corresponding to the part or parts you wish to record: • ALL RECORD This is av ailable only in record standby . Selecting this instantly sets all parts (except K.
94 7. Music Disk Recorder 7. Press the REC button again. The REC lamp lights and the PLA Y lamp flashes, indicating that the Music Disk R ecorder is ready to record. 8. Press the Data Control button corresponding to CUSTOM PLA Y to start recording of the new part or parts.
95 7. Music Disk Recorder R ecording Registrations (and Bulk Data) Y ou can also record R egistrations by themselv es, without recording a performance .
96 7. Music Disk Recorder R ecalling Recorded R egistrations (and Bulk Data) The R egistrations (and bulk data) recorded to song numbers in the abo ve operation can be easily loaded back to the AR -1 00. T o recall R egistration data: 1. Insert the proper disk and select the appropriate song number .
97 7. Music Disk Recorder N aming Y our S ong Once you ha ve recorded a song, y ou can give that song a name b y using the Input Name function. T o name your newly recorded song: 1. Call up the UTILITY page with the appropriate Menu button. 2. Select “INPUT NAME” with the appropriate Data Control buttons.
98 7. Music Disk Recorder 4. Use the Data Control buttons corresponding to the cursor arrow s to mov e the cursor position in the name . 5. Enter the desired character with the appropriate Data Control button.
99 7. Music Disk Recorder Pla yback Y ou can play back y our recorded performance by simply pressing the PLA Y button. R egistrations and other data are automatically recalled to the AR -1 00 before playback. S ong Pla ybac k T o play back a song: 1. Insert the disk containing your recorded song.
100 7. Music Disk Recorder 3. Start playback b y pressing the PLA Y button. The PLA Y lamp lights up and small dashes mov e across the display , indicating that the M.D.R. is resetting R egistrations on the AR-1 00. Playback of the song begins after the AR -1 00 data is reset and the song time is shown on both display s.
101 7. Music Disk Recorder R epeat Pla y This function allo ws y ou to repeatedly play back all songs on a disk (either in order or at random), or pla y back one specific song. T o use R epeat Play: 1. Call up the REPEA T PLA Y page . Press the appropriate Menu button.
102 7. Music Disk Recorder Pla ybac k of XG/G M Disks (optional) The M.D.R. is compatible with XG and GM format song data. A dditional playback functions — including Solo Pla y , Minus One , and Part Select — are a vailable when disks containing XG/GM song data are used.
103 7. Music Disk Recorder PLA Y P ART Page Press the Data Control button corresponding to the part y ou wish to turn on or off. (Parts that are on are highlighted.) 4. Start playback b y pressing the PLA Y button. The elapsed song time is sho wn on both the M.
104 7. Music Disk Recorder Pla ybac k of D O C Disks (optional) The M.D.R. is compatible with Cla vinov a DOC (Disk Orchestra Collection) format song data. The Part Select function is a vailable when disks containing DOC song data are used. 1. Insert an DOC song disk in the M.
105 7. Music Disk Recorder PLA Y P ART Page Press the Data Control button corresponding to the part y ou wish to turn on or off. (Parts that are on are highlighted.) 4. Start playback b y pressing the PLA Y button. The elapsed song time is sho wn on both the M.
106 7. Music Disk Recorder T o use Phrase R epeat: 1. Select the desired Phrase Number with the appropriate Data Control buttons. 2. T o repeatedly play back the selected Phrase , press the PLA Y button (or select PLA Y in the display). Playback of the selected Phrase continues indefinitely .
107 7. Music Disk Recorder Loading St yles from Style File Disks Many additional Styles are a vailable for the AR -1 00 on disk, and these can be loaded to the eight User Style locations . T o load a Style from a Style File disk (optional): 1. Insert a Style File disk in the disk slot.
108 7. Music Disk Recorder Other M.D.R. F unctions Custom Pla y Custom Play allo ws y ou to play back the song without resetting the R egistrations and other data. Custom Play can be used from either the CONTR OL P ANEL page or the REPEA T PLA Y page .
109 7. Music Disk Recorder Changing the T empo Y ou can change the tempo of the song — either before song pla yback or as the song is pla ying — from the CONTR OL P ANEL page. T o change the tempo: Use the Data Control buttons corresponding to TEMPO +/- in the display .
110 7. Music Disk Recorder S ong C op y This function lets y ou copy the data recorded at one song number to another song number . T o use the Song Copy function: 1. Call up the UTILITY page by pressing the appropriate Menu button. 2. Select the song number to be copied by using the SONG SELEC T buttons or the SONG SELECT controls in the displa y .
111 7. Music Disk Recorder 5. Select “COPY OK” in the display b y pressing the appropriate Data Control button. 6. T o actually execute the operation, select “OK” at the prompt, or select “CANCEL” to abort the operation. When the song has been completely copied, the displa y returns to the original UTILITY page .
112 7. Music Disk Recorder 2. Insert the source disk in the disk slot. 3. Call up the UTILITY page by pressing the appropriate Menu button. 4. Select “DISK COPY” in the display b y pressing the appropriate Data Control button. 5. At the prompt, select “OK” to initiate the disk cop y operation, or “Cancel” to abort.
113 7. Music Disk Recorder 9. R epeat steps #6 through #8 abov e as many times as necessary , follo wing the prompts on the display . The number of times the abo ve steps need to be repeated depends on the amount of data to be copied and the disk type .
114 8. Voice Edit V oice E dit In addition to th e versatile Flute/Tibia section, th e AR-1 00 has a V oice Edit feature that allow s you to create your o wn V oices. V oice Edit uses sophisticated sound-shaping tools that make it possible to take existing V oices and craft a virtually endless v ariety of original sounds from th em.
115 8. Voice Edit After you ha ve selected a V oice , the following displa y (or one similar) will appear: 3. Use the Menu buttons to select the desired V oice Edit page , and edit the V oice according to the instructions that follow . V OICE EDIT — NAME REP .
116 8. Voice Edit • SPEED Determines the speed of the R epeat function. The higher the value , the faster the speed. R ange:0 – 1 00 3 OL (Output Level) Determines the lev el of the V oice .
117 8. Voice Edit 2 EG RA TE The EG (Envelope Generator) settings determine ho w the level of the sound changes in time . This lets y ou reproduce many sound characteristics of natural acoustic instruments — such as the quick attack and deca y of percussion sounds , or the long release of a sustained piano tone .
118 8. Voice Edit N aming Y our V oice Once you ha ve created y our own V oice, y ou can give that V oice a name . T o name your newly created V oice: 1. Call up the NAME/ REPEA T/ OL page (see “Selecting a V oice for Editing” abov e for instructions), and select INPUT NAME with the appropriate Data Control buttons.
119 8. Voice Edit S aving the Edited V oice After you ha ve created and named a new V oice, y ou should sav e that V oice for future use . 1. Select the Sav e page . Press the appropriate Menu button. 2. Select the desired User V oice number (1–16) with the appropriate Data Control button.
120 8. Voice Edit Quitting V oice Edit Y ou can quit the V oice Edit function from any of its displa y pages. T o quit: 1. Press the V OICE EDIT button in the DISPLA Y SELECT section once again. 2. At the prompt, select “OK” to quit V oice Edit, or “Cancel” to continue editing.
121 8. Voice Edit 2. Use the P AGE buttons to scroll through the v arious V oice category selections until “USER V OICE” is shown. 3. Press the Menu button corresponding to “USER V OICE” in the display . 4. Press the Data Control button corresponding to the User V oice you wish to select.
122 9. Accompaniment Program A ccompaniment P rogram The AR -1 00 features two po werful rhythm/accompaniment programming functions: A ccompaniment Program and Sequence Program.
123 9. Accompaniment Program U sing an Existing St yle Any Style in the AR -1 00 — including the User Styles you’ve cr eated yourself — can be edited and further refined using the A ccompaniment Pr ogram tools .
124 9. Accompaniment Program 2. While holding down the A CCOMP . PROGRAM button, press the same button in the STYLE section again. When recording a Style from scratch: Simply press and release the A CCOMP . PROGRAM button. When recording from scratch, “No name” appears as the Style name , indicating that the Style has no data.
125 9. Accompaniment Program Instrument Group No. Voice Name Instrument Group No. Voice Name Piano 1 GrandPno Reed 65 SprnoSax 2 BritePno 66 Alto Sax 3 E.Grand 67 TenorSax 4 HnkyTonk 68 Bari.Sax 5 E.Piano1 69 Oboe 6 E.Piano2 70 Eng.Horn 7 Harpsi. 71 Bassoon 8 Clavi.
126 9. Accompaniment Program DRUM MAP ( Part 1) Note# Note Key off Alternate assign Standard Kit Standard2 Kit Room Kit Rock Kit Electro Kit Analog Kit Jazz Kit 2 4 C 0 Seq Click H 2 5 C # 0 Brush Tap.
127 9. Accompaniment Program DRUM MAP (Part 2) Note# Note Key off Alternate assign Brush Kit Classic Kit Style Kit 1 Style Kit 2 Style Kit 3 Style Kit 4 24 C 0 25 C# 0 —— 26 D 0 Ø —— 27 D# 0 .
128 Floor Tom H Floor Tom L Snare H Snare M Bass Drum H Bass Drum M Bass Drum L Snare L Snare Roll Brush Swirl H Brush Swirl L Seq Click H Hi-Hat Closed Hand Clap Side Stick Open Rim Shot Sticks Casta.
129 9. Accompaniment Program R ecording a U ser St yle 1. Set up the AR-1 00 for recording by turning off all V oice sections in the ENSEMBLE section. Turning off all V oice sections allow s you to properly hear the parts y ou will be recording. Also make sure that K eyboard Percussion has been turned off (both LO WER and PED AL).
130 9. Accompaniment Program 1 INPUT NAME This calls up the INPUT NAME pages for assigning an original name to the created/edited Style . (See “Naming Y our User Style” on page 140.). 2 SECT (Section) This determines the section that is to be recorded.
131 9. Accompaniment Program 4. Set up recording for the desired part in the RECORD page . There are eight parts a vailable for recording: Rh ythm 1 & 2, Bass, Chord 1 & 2, P ad, and Phrase 1 & 2. R ecord each of these one by one , listening to previously recorded parts as y ou continue.
132 9. Accompaniment Program 5. Select the desired V oice(s) for recording. Before you actually record an y of the parts for your User Style , y ou should select which V oices you will use for each part. A special set of V oices are used for recording in A ccompaniment Program.
133 9. Accompaniment Program 7. R ecord the selected part. Use the ST ART or SYNCHR O ST ART buttons to start and stop recording. Press ST ART to start recording immediately , or press SYNCHRO ST ART to start recording at the first press of a key in the Lo wer keyboard.
134 9. Accompaniment Program 8. R ecord the remaining parts (and sections) as needed. Continue recording in the same fashion (steps #2 – #7 abo ve) for the other parts of the selected section, until y ou’re satisfied with the new Style . R ecord in the same w ay for the other sections (Intro, Ending, etc.
135 9. Accompaniment Program Delete The Delete function erases all data recorded for the part. When DELETE is selected, the following prompt appears: Select “OK” to delete the part, or “Cancel” to abort the operation.
136 9. Accompaniment Program E diting Recorded P arts — C opy and Quantize Copy and Quantize are conv enient editing functions you can perform on recorded parts . Copy allo ws you to cop y recorded data within a part. Quantize lets you “ clean up” y our recorded data, making sure that all parts are rh ythmically precise and accurate .
137 9. Accompaniment Program P art C op y The Copy function allo ws y ou to copy the data from a specified range of measures in the part to another measure(s) in the part. T o copy the data of a part: 1. Set the TOP and LAST measures . The “up” Data Control button increases the v alue, the “do wn” button decreases it.
138 9. Accompaniment Program P art Quantize The Quantize function allo ws y ou to “ clean up” your recorded data, making sure that the part is rhythmically accurate . Quantize aligns all notes in the part to the nearest specified beat — up to 1/32 note resolution.
139 9. Accompaniment Program Other S ettings — V olume, R everb, Chorus, and P an These functions allo w you to change and enhance the sound of the v arious parts. Each function for each part is completely independent, giving y ou enormous flexibility in mixing the parts.
140 9. Accompaniment Program N aming Y our U ser St yle Once you ha ve created y our own Style , y ou can give that Style a name . T o name your newly created or edited Style: 1. Call up the BASIC page (with the appropriate Menu button), and select INPUT NAME (with the appropriate Data Control buttons).
141 9. Accompaniment Program 2. Select the desired User location (1 – 8). Use the appropriate Data Control buttons . 3. At the prompt, select “ OK ” to sav e the User Style or “ Cancel ” to abort the operation. Clear A ll Data This function deletes all User Styles from memory .
142 9. Accompaniment Program Quitting A ccompaniment P rogram Y ou can quit the Accompaniment Program function from an y of its display pages . T o quit: 1. Press the ACCOMP . PR OGRAM button in the DISPLA Y SELEC T section once again. 2. At the prompt, select “ OK ” to quit Accompaniment Program, or “ Cancel ” to continue editing.
143 9. Accompaniment Program S electing and Playing U ser St yles The User Styles y ou hav e created in Accompaniment Program can be selected and pla yed from the panel Style buttons . T o select a User Style: 1. Press one of the dotted buttons in the STYLE section.
S aving U ser St yles to Disk Once you ha ve created y our own User Styles , you ’ ll want to sa ve them to disk. Doing so allo ws y ou to free up memory in the AR -1 00 for creating additional Styles. Also, the User Styles y ou ’ v e saved to disk can be loaded back to the AR -1 00 any time .
145 10. Sequence Program S equence P rogram Th e Sequence Program function lets y ou connect any of th e AR-1 00’s Styles — as w ell as your own original User Styles , created in A ccompaniment Program (page 122) — to create complete rhythm/accompaniment compositions .
146 10. Sequence Program 2. Press one of the numbered Sequence buttons to call up the Sequence display . Creating a S equence P rogram 1. Select the EDIT page . 2. Select PRESET or USER, for the type of Style to be entered. Use the appropriate Data Control buttons .
147 10. Sequence Program 3. Select the STYLE SELECT page . Use the corresponding Menu button. 4. Press a Style button, and select a Style from the Style menu, if desired. Pressing a Data Control button in this situation selects the corresponding Style and automatically returns to the EDIT page .
148 10. Sequence Program 5. From the EDIT page , press the appropriate Data controls to set, insert, delete or clear the data as needed. In this display , different Styles and sections can be entered in sequence along the pattern ro w in the middle of the displa y .
149 10. Sequence Program 1 SET This enters the selected Style to the current cursor position, replacing the previous entry , and automatically mo ves the cursor arro w to the next position.
150 10. Sequence Program C opying S equence Data This function allo ws y ou to copy the data stored at one Sequence button to another . 1. Call up the Sequence Program function by pressing the SEQUENCE PROGRAM button, and press the SEQ. (Sequence) button corresponding to the sequence you wish to cop y .
151 10. Sequence Program 4. At the prompt, select "OK" to cop y , or "Cancel" to abort the operation. S aving the Sequence and Quitting S equence P rogram The edited Sequence is automatically sa ved when you quit the Sequence Program function.
152 10. Sequence Program Pla ying All S equences in Order Y ou can also automatically play back up to all four Sequences in order , one after the other .
153 11. Footswitches and Knee Lever F ootswitc hes and Knee Lever Th ese leg- and foot-operated controls allo w you to turn on and execute v arious performance functions with out taking your hands from th e keyboards. F ootswitc hes The AR-1 00 has tw o footswitches on the expression pedal that can be used to control v arious functions.
154 11. Footswitches and Knee Lever RH Y T HM Selection of left footswitch control o ver Style functions . When this is chosen, the following display appears: FOOT SWIT CH LEFT Page — Rh ythm One of the four A ccompaniment Control functions can be selected.
155 11. Footswitches and Knee Lever GL I DE Selection of footswitch control o ver Glide . Press the footswitch to immediately lo wer the pitch of the selected V oice or V oices by a halfstep, and release it to slo wly return the pitch to normal.
156 11. Footswitches and Knee Lever TR E M O L O This enables footswitch control o ver the T remolo effect. When TREMOLO is selected here , pressing the footswitch turns the T remolo effect on and off, performing the same function as the TREMOLO button.
157 11. Footswitches and Knee Lever 3. Press the knee lever to the right with y our knee when you w ant to hav e sustain. 1 When the knee lev er is folded up, Sustain is applied constantly , as long as the front panel SUST AIN buttons are on. 2 When the knee lev er is vertical, Sustain is off.
158 11. Footswitches and Knee Lever Lead Slide C ontrol T o select knee lever control ov er Lead Slide: 1. Call up the LEAD V OICE - VIBRA TO P age . T o do this , press the desired Lead V oice button twice (to call up the Lead V oice Condition page), then select the VIBRA T O page with the appropriate Menu button.
159 12. Accessory Jacks and Controls A ccessory J ac ks and C ontrols The AR -1 00 is equipped with various input/output terminals and miscellaneous controls , th e functions of which are described belo w . Underside of K eyboard 1 AUX IN jacks (R CA) For connection of another sound source (CD pla yer , tone generator , etc.
160 13. Pitch Controls Pitc h C ontrols Th ere are tw o ov erall pitch-related controls on th e AR-1 00: Transpose and Pitch. T ranspose allow s you to change th e key of the instrument and Pitch lets y ou finely adjust the tuning.
161 13. Pitch Controls TR A N S P O S E Buttons Transpose can also be set from the panel, with the TRANSPOSE ´ / Ï buttons . Press TRANSPOSE Ï to raise the T ranspose setting by a half-step, and press TRANSPOSE ´ to lower it. The current T ranspose setting is shown in the V oice Display .
162 14. MIDI MID I MIDI (Musical Instrument Digital Interface) is a w orldwide standard that allow s virtually all modern electronic instruments to communicate with each oth er and control each other’ s functions. For example , y ou could play different sounds on a connected s ynthesizer from th e keyboards of the AR-1 00.
163 14. MIDI T o select the MIDI page: Press the PIT CH/MIDI button in the DISPLA Y SELECT section, and select the MIDI page b y pressing the appropriate Menu button. MIDI CONTROL P age 1 MODE Determines the MIDI operating mode of the AR -1 00. This should be set to match the connected MIDI device to ensure proper MIDI control and response .
3 INT ./EXT . (Internal/External) • LEAD Determines internal or external control of the Lead V oice. When set to Internal, the Upper keyboard play s the Lead V oice. When this is set to External, a connected MIDI instrument can play the Lead V oice (ov er channel 4).
A ppendix T roubleshooting GENERAL OPERA TION • No sound is produced from the Electone’s speakers . The plug of the cable from the speaker unit is disconnected. R efer to the separate “ Assembly Instructions ,” and reconnect the plug securely .
• When playing a P edal V oice from the Low er Keyboard (using the T o Low er function), pressing the Low er Keyboard’ s Sustain button does not turn on Sustain. Even though the P edal V oice is being pla yed from the Lo wer Keyboard, it is still a P edal V oice; turn the Sustain on with the Pedal Sustain button.
• The accompaniment and/or rhythm suddenly stops when releasing keys on the Lo wer keyboard or P edalboard. Depending on the A.B .C. mode and Memory settings, y ou can stop the accompaniment and/or rhythm b y releasing the keys.
REGISTRA TION MEMORY • Certain functions hav e not been memorized to R egistration Memory . Transposition and Pitch control data, among others , cannot be memorized (except as song data). (See page 73.) VOICE EDITING • During V oice editing, the specified V oice isn’t heard, ev en when the keyboard is play ed.
169 15. Appendix Ø 0–15, 32–47, 64–71 ******************** Ø ˛ ˛ ˛ Ø Ø ˛ ˛ Ø ˛ Ø 0–15, 32–47, 64–71 ******************** Ø ˛ ˛ ˛ Ø Ø ˛ ˛ Ø ˛ (*6) (*5) (F AH, FCH) : T.
170 15. Appendix Ø 0–15 ******************** Ø ˛ ˛ ˛ Ø Ø ˛ ˛ Ø ˛ Ø 0–127 0–127 Ø ˛ ˛ ˛ ˛ ˛ ˛ ˛ Ø ˛ : T rue number : Song Position : Song Select : T une : Clock : Commands :.
171 15. Appendix Specifications KEYBOARD Keyboards Touch Tone VOICE Tone Generation Voices Voices for Playback Ensemble Organ Variation VOICE CONTROL/EFFECT Volume Feet Pan Brilliance Vibrato Lead Sli.
Index 172 15. Appendix A A.B.C. (Auto Bass Chord) ................................55 Accomp. Part ...................................................51 Accompaniment Control ......................47, 49, 50 Accompaniment Program Drum List ............
173 15. Appendix M M./TO DISK button ..........................................73 M.D.R. (Music Disk Recorder) .........................83 Main A/B ............................................49, 50, 148 Manual Balance ................................
M.D.G., EMI Division, © Yamaha Corporation 1996 VU 94440 609MWCP3.2-01A0 Printed in Japan.
デバイスYamaha AR-100の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Yamaha AR-100をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはYamaha AR-100の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Yamaha AR-100の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Yamaha AR-100で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Yamaha AR-100を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はYamaha AR-100の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Yamaha AR-100に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちYamaha AR-100デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。