YamahaメーカーCDC-675の使用説明書/サービス説明書
ページ先へ移動 of 25
CONTENTS CAUTION ............................................................... 4 CONNECTIONS .................................................... 5 IDENTIFICA TION OF COMPONENTS .................. 6 BASIC OPERA TION .................................
2 SAFETY INSTRUCTIONS 1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to.
3 English As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personel only. To avoid electrical shock, do not open the unit. Refer servicing to qualified personnel only.
4 1 To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install your unit in a cool, dry, clean place, and in a horizontal and stable position – away from windows, heat sources, vibration, dust, moisture, or cold.
DIGITAL IN CD OPTICAL OPTICAL DIGITAL AUDIO OUT LINE OUT 1 5 English CONNECTIONS ● Before making any connections, switch OFF the power to the unit and the amplifier or other components. ● Connections should be made to the correct input terminals of the amplifier or other components.
6 POWER 5 SKIP/SEARCH +1 0 1 2 3 4 5 6 7 8 9 0 PROG PLAYXCHANGE OPEN/CLOSE OUTPUT LEVEL PHONES DISC NATURAL SOUND COMPACT DISC PLAYER PEAK / 1 2 3 4 + – IDENTIFICA TION OF COMPONENTS FRONT P ANEL * ( ) indicates the page number on which the control and its function are best described.
7 English CDC-675 only CDC-675 only REMOTE CONTROL TRANSMITTER CLEAR button (p. 15) OPEN/CLOSE button (p. 8) PROG button (p. 14) Numeric buttons (p. 10) DISC SKIP button (p. 8) SYNCHRO button (p. 17) TEXT/TIME display mode-select button (p. 11) DIMMER button (p.
1 Turn the power on. 2 Open the disc tray and load discs. Use the disc guides to align the discs correctly in the tray. 3 Close the disc tray. 4 Select a desired disc play mode (1DISC or 5DISCS) confirming it on the display. “1DISC” mode: The unit will play a designated disc only.
9 English T o stop play temporarily To resume play, press the PAUSE button again (or press the PLAY button). * The (PLAY/PAUSE) button on the front panel can also be used to stop play temporarily or to resume play.
10 DIRECT PLA Y Select a desired track by using the numeric buttons. Example: To select track 25 Press ➀ twice, then immediately press ➁ once. * If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played.
5DISCS 2 3 4 5 6 7 8 9 1 0 1 1 1 2 5DISCS 2 3 4 5 6 7 8 9 1 0 1 1 1 2 5DISCS 2 3 4 5 6 7 8 9 1 0 1 1 1 2 5DISCS 2 3 4 5 6 7 8 9 1 0 1 1 1 2 TEXT/ TIME 11 English When the DISC SCAN button is pressed in stop mode, this unit will play a section of each disc in turn for 8 seconds.
12 CDC-675 only Adjusting the level of signals output into an amplifier , etc. You can adjust the level of sound signals output from the LINE OUT terminals on the rear panel into an amplifier, etc.
13 English 1 Load one or more discs. 2 Close the disc tray. 3 Select a desired disc play mode (1DISC or 5DISCS). * If you select “1DISC” mode, next select a desired disc by using the DISC SKIP button on the remote control transmitter or a DISC -select button on the front panel.
1 Stop the unit. 2 If you will select tracks from a disc (or discs) other than the disc on the Disc 1 tray, make this unit display the total recorded time of each disc to be used by pressing the DISC SKIP button in turn. * Without this operation, the total time of the programmed tracks will not be displayed during programming.
15 English T o stop program play Press the STOP button. The first programmed track number will be displayed. To resume play, press the PLAY button. Play will begin from the beginning of the program. T o cancel a programmed sequence There are several methods, as described below.
3 Select the desired index number. T o cancel the index search function Press the INDEX button. Notes ● Not all discs have index numbers. The index system has a method for sub-dividing tracks into smaller divisions (for example, the movements within classical symphonies) for easier location of those parts.
1 Select a disc. 2 Load a tape on the tape deck. * CDC-675 only The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.) 3 This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode.
18 1 Stop the unit. 2 Select the disc. 3 The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.) 4 Enter the tape’s total possible recording time (tape length). You can select any of four tape lengths by pressing the TAPE button.
1 Stop the unit. 2 If you will select tracks from a disc (or discs) other than the disc on the Disc 1 tray, make this unit display the total recorded time of each disc to be used by pressing the DISC SKIP button in turn. * This unit will read the contents of a disc by this operation.
1 Follow steps 1 – 4 on page 18. 2 The unit will automatically program tracks for side A and side B separately considering the tape’s total time. * The programmed track numbers and the total number of tracks for side A and B are displayed for a short time.
21 English 1 Stop the unit. 2 Select the “1DISC” disc play mode. 3 Select the disc. 4 The peak level search is performed on the disc. Next, the part where the source level peaks is repeatedly played. Adjust the recording level on the tape deck listening to this repeat play.
TIMER PLA Y 22 NOTES ABOUT THE REMOTE CONTROL TRANSMITTER Battery installation Battery replacement If you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes ● Use only AA, R6, UM-3 batteries for replacement.
23 English NOTES ABOUT HANDLING COMP ACT DISCS ● This compact disc player is designed for playing compact discs bearing the mark only. Never attempt to load any other type of disc into the unit.
24 AUDIO SECTION Frequency response .......................... 2 Hz – 20 kHz, ±0.5 dB Harmonic distortion+noise (1 kHz) < CDC-675 > .................................................. 0.003% or less < CDC-575 > ..........................
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.
デバイスYamaha CDC-675の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Yamaha CDC-675をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはYamaha CDC-675の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Yamaha CDC-675の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Yamaha CDC-675で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Yamaha CDC-675を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はYamaha CDC-675の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Yamaha CDC-675に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちYamaha CDC-675デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
