YamahaメーカーCDR-S1000の使用説明書/サービス説明書
ページ先へ移動 of 38
OPEN/CLOSE C D DIRECT REC INPUT PHONES REC LEVEL LEVEL DIGITAL/ANALOG MIN MAX 01 0 OPTICAL COAXIAL ANALOG REC MUTE / // CDR-S1000 O WNER’S MANU AL MODE D’EMPLOI Compact Disc Recorder Lecteur/Enreg.
• Explanation of Graphical Symbols The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
FCC INFORMA TION (for US customers onl y) 1. IMPORT ANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Y amaha may void your authority , granted by the FCC, to use the product.
E-1 INTRODUCTION Thank you for purchasing this YAMAHA product. We hope it will give you many years of trouble-free enjoyment. For the best performance, read this manual carefully.
E-2 English PRECAUTIONS: READ THIS BEFORE OPERATING THE UNIT CA UTIONS • T o assure the finest performance, please read this manual carefully . Keep it in a safe place for future reference. • Install your unit in a well ventilated, cool, dry , clean place – away from windows, heat sources, vibration, dust, moisture, or cold.
E-3 DISCS COMPATIBLE WITH THIS UNIT Discs that can be used for recording Be sure to use only CD-R and CD-RW discs made by reliable manufacturers. CD-R and CD-RW digital audio discs that display either of the following marks can be used with this unit.
E-4 English • Batteries (size AA, UM-3, R6) (2) • RCA Pin Cables (2) • Optical Fiber Cable GETTING STARTED Supplied accessories EFFECT FINALIZE STOP PAUSE PLAY SEARCH SKIP ERASE REC REC MUTE 123 456 789 +10 0 INDEX REPEAT RANDOM CLEAR PROG REC MODE TRACK NO.
E-5 NATURAL SOUND CD RECORDER CDR-S1000 POWER FINALIZE ERASE DISPLAY TRACK NO. EFFECT REC MODE OPEN/CLOSE CD DIRECT REC INPUT PHONES REC LEVEL LEVEL DIGITAL/ANALOG MIN MAX 01 0 OPTICAL COAXIAL ANALOG .
E-6 English Connections GETTING STARTED Digital connections using the DIGITAL OPTICAL and COAXIAL jacks • Before using the DIGITAL OPTICAL jacks, be sure to remove the jack covers. Replace the jack covers in order to protect the jacks from dust when they are not being used.
E-7 GETTING STARTED INPUT OPTICAL COAXIAL ANALOG Analog connections using the LINE IN and OUT jacks • Be sure that the left (“L”) and right (“R”) LINE IN (REC) and LINE OUT (PLAY) jacks are connected correctly. • Connect the LINE IN (REC) and LINE OUT (PLAY) jacks to the “MD/DAT” (or equivalent) jacks of the amplifier or receiver.
E-8 English Display Fr ont panel ~ POWER (P.10/P.11) Ÿ TRACK NO. (P.18) ! EFFECT (P.19) ⁄ REC MODE (P.13 to P.15) @ Remote control sensor (P.5) ¤ Display (P.11) # CD DIRECT (P.18) ‹ REC MUTE (P.16) $ REC (P.13 to P.16) › INPUT (P.7) % REC LEVEL DIGITAL/ANALOG (P.
E-9 Remote contr ol ~ RANDOM (P.26) Ÿ TRACK NO. WRITE (P.18) ! REC MODE (P.13 to P.15) ⁄ EFFECT (P.19) @ REPEAT (P.27) ¤ Numeric buttons (P.23/P.25/P.27) # FINALIZE (P.20) ‹ ERASE (P.21/P.22) $ ! SEARCH ⁄ (P.24) › STOP & (P.23) % PAUSE * (P.
E-10 English BASIC OPERATION To load a disc 1 Press POWER on the front panel to turn the power on. 2 Press OPEN/CLOSE ( OPEN/CLOSE on the remote) to open the disc tray. 3 Load a disc using the disc guide to align the disc correctly in the disc tray. • When loading a prerecorded CD disc, load the disc with the label side up.
E-11 BASIC OPERATION Important Do not turn off the power during finalization of a CD-R or CD-RW disc (after recording). Doing so may result in a misoperation in which recorded material may be lost and further recording on the disc made impossible. For more information on finalization of CD-R and CD-RW discs, please see page 20.
E-12 RECORDING FUNCTIONS English Recor ding modes This recorder features a number of recording modes allowing you to make recordings from a wide variety of program sources (both analog and digital). • When using this unit to make recordings, subcode information that may be present in the source audio signal such as CD TEXT, index data, etc.
E-13 RECORDING FUNCTIONS This is a recording mode suitable for compiling single tracks from different audio sources. A new track marker is automatically placed at the start of the track. Synchr onized recor ding of a single track NATURAL SOUND CD RECORDER CDR-S1000 POWER FINALIZE ERASE DISPLAY TRACK NO.
E-14 RECORDING FUNCTIONS English NATURAL SOUND CD RECORDER CDR-S1000 POWER FINALIZE ERASE DISPLAY TRACK NO. EFFECT REC MODE OPEN/CLOSE CD DIRECT REC INPUT PHONES REC LEVEL LEVEL DIGITAL/ANALOG MIN MAX.
E-15 RECORDING FUNCTIONS The Full AUTO synchronized recording mode automatically performs finalization after ALL track synchronized recording (described on the previous page). Finalization is the final process in recording a CD-R disc that makes it playable on standard CD players.
E-16 RECORDING FUNCTIONS English This is a recording mode used when manual control of the recording is required or preferred. (Please note that synchronized recording (single or ALL) is recommended when making a digital recording from CD or MD, etc.) Manual r ecor ding NATURAL SOUND CD RECORDER CDR-S1000 POWER FINALIZE ERASE DISPLAY TRACK NO.
E-17 RECORDING FUNCTIONS Setting the digital recording level The volume level of digital audio sources is often similar, however, level differences may be quite obvious between different digital audio sources and even between one recording and another.
E-18 RECORDING FUNCTIONS English Manual track marking NATURAL SOUND CD RECORDER CDR-S1000 POWER FINALIZE ERASE DISPLAY TRACK NO. EFFECT REC MODE OPEN/CLOSE CD DIRECT REC INPUT PHONES REC LEVEL LEVEL D.
E-19 RECORDING FUNCTIONS Applying dynamic range compr ession to a r ecor ding NATURAL SOUND CD RECORDER CDR-S1000 POWER FINALIZE ERASE DISPLAY TRACK NO.
E-20 RECORDING FUNCTIONS English Finalization is the process that concludes recording, and allows a CD-R disc to be played on a standard CD player. (Please note that CD-RW discs can only be played on a CD-RW compatible player even after finalization has been performed.
E-21 RECORDING FUNCTIONS CD-RW discs can be erased and new recordings can be made after material has been erased. The following types of erasing are possible with this unit. Last Track Erase Erases the last track. This operation is not possible on a CD-RW disc that has been finalized or when only one track has been recorded on the disc.
E-22 RECORDING FUNCTIONS English All Track Erase 1 Load a CD-RW disc that has been recorded on. • This function is not possible on a finalized CD-RW disc. 2 Press ERASE until “Erase ALL?” appears on the display. • If you want to cancel the Erase mode, press & ( STOP & on the remote).
E-23 PLAYBACK FUNCTIONS Playing a CD disc To pause play temporarily During playback, press ^ ( PAUSE * on the remote). To resume play, press ^ ( PAUSE * or PLAY # on the remote). To stop play completely During playback, press & ( STOP & on the remote).
E-24 PLAYBACK FUNCTIONS English Sear ching for a track To go forward rapidly Press and hold ⁄ / › ( SEARCH ⁄ on the remote) during play. When the button is released, normal playback is resumed. To go backward rapidly Press and hold $ / ! ( SEARCH ! on the remote) during play.
E-25 PLAYBACK FUNCTIONS You can enjoy listening to your favorite tracks in any desired order by programming tracks. Pr ogram play Display information during programming 1 Shows the step number for the track to be programmed next. 2 Shows the programmed track number.
E-26 PLAYBACK FUNCTIONS English To check program data 1. During program play, press & ( STOP & on the remote). 2. Press PROG on the remote. 3. Each time ⁄ / › ( SKIP › on the remote) is pressed, the programmed track numbers and their order in the program can be checked one after another.
E-27 PLAYBACK FUNCTIONS To select an index number 1 Use the numeric buttons to select a track that has index numbers. 2 Press INDEX . 3 Use the numeric buttons to select the desired index number. To cancel the index search function Press INDEX . Notes • Not all discs have index numbers.
E-28 OTHER FUNCTIONS English You can select the brightness level of the display as it suits your preferences. Changing the brightness of the display Connect the headphones to the PHONES jack and adjust the volume by using LEVEL .
E-29 ADDITIONAL INFORMATION • This compact disc recorder is designed for use with compact discs bearing the , , or marks only. Never attempt to load any other type of disc into the unit.
E-30 ADDITIONAL INFORMATION English Can’t Copy Digital recording cannot be performed. (See “SCMS copy protection” on page 32.) Disc Full Recording is not possible because there is no blank space remaining on the disc. Track Full Recording is not possible because the maximum number of 99 tracks has already been recorded on the disc.
E-31 ADDITIONAL INFORMATION SYMPT OM CA USE REMED Y If the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested.
E-32 ADDITIONAL INFORMATION English SCMS copy protection As a digital audio component, this CD recorder conforms with the Serial Copy Management System (SCMS) standards. The Serial Copy Management System restricts copies made by recording digital signals to first generation copies only.
E-33 ADDITIONAL INFORMATION CD-Recor der system notes and limitations About track length and number • The CD specifications state that the minimum length of a CD track must be 4 seconds.
E-34 ADDITIONAL INFORMATION English Specifications Audio Performance Frequency response ...................................................................... 5 - 20,000 Hz, ±0.5 dB S/N ratio Playback .................................................
F-35 INFORMATIONS COMPLÉMENTAIRES YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR, 22-34, 25462 RELLINGEN BEI HAMBURG, F.
デバイスYamaha CDR-S1000の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Yamaha CDR-S1000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはYamaha CDR-S1000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Yamaha CDR-S1000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Yamaha CDR-S1000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Yamaha CDR-S1000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はYamaha CDR-S1000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Yamaha CDR-S1000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちYamaha CDR-S1000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
