YamahaメーカーCVP-202の使用説明書/サービス説明書
ページ先へ移動 of 178
Owner’ s Manual IMPORTANT Check Your Power Supply Make sure that your local AC mains voltage matches the voltage specified on the name plate on the bottom panel. In some areas a voltage selector may be provided on the bottom panel of the main keyboard unit near the power cord.
92-469- ➀ (bottom) ENVIRONMENTAL ISSUES: Yamaha strives to pro- duce products that are both user safe and environmentally friendly. We sincerely believe that our products and the production methods used to produce them, meet these goals.
3 CVP-202 • Never insert or drop paper, metallic, or other objects into the gaps on the key cover, panel or keyboard. If this happens, turn off the power immediately and unplug the power cord from the AC outlet. Then have the instrument inspected by qualified Yamaha service personnel.
4 CVP-202 Thank you for pur chasing the Y amaha Clavinova! W e r ecommend that you r ead this manual car efully so that you can fully take advantag e of the advanced and convenient functions of the Clavino va. W e also r ecommend that you keep this manual in a safe and handy place for futur e r eference .
5 CVP-202 Features of the Clavinova ● Easy-to-use LCD Display The LCD (together with the various panel b uttons) provides comprehensi ve and easy-to-understand control of the Clavino va’ s operations (page 16).
6 CVP-202 T able of Contents 4 CHAPTER 1: Getting Ready About This Manual 8 Handling the Floppy Disk Drive (FDD) and Floppy Disks 9 Setting Up the Clavinova 10 Music Rest ................................................................................
7 CVP-202 5 CHAPTER 6: Registrations Using Registrations(Registering and Recalling Panel Setups) 89 Storing a Panel Setup ...................................................................... 89 Recalling the Registered Panel Settings ...............
8 CVP-202 This section e xplains the notation conv entions that are used throughout this manual. ■ Square brac kets [ ] ............................................................................................ Square brackets enclose the names of panel b uttons, sliders, and connectors as they appear on your Cla vinova.
9 CVP-202 ■ Cleaning the Disk Drive Read/Write Head ...................................................................................... ● Clean the read/write head regular ly .
10 CVP-202 ■ T o raise the m usic rest: ............................................................................... Z Pull the stand up and to ward yourself as f ar as it will go. X Flip do wn the two metal supports at the left and the right on the rear of the music rest.
11 CVP-202 Z Connect the power cord. Insert the plugs at the ends of the cor d, one into the A C INLET on the bottom panel of the Cla vinov a, and the other into a standard AC outlet. In some areas, a plug adapter may be pro vided to match the pin con- figuration of the A C wall outlets in y our area.
12 CVP-202 CANCEL A-1 D0 C0 B-1 A0 G0 F0 E0 C1 D1 E1 F1 B0 G1 A1 B1 C2 D2 E2 F2 G2 A2 B2 C3 D3 E3 DEMO HELP START / STOP T AP SYNCH RO START / STOP CONTRAST BEAT DIRECT ACCESS PAG E MIXER FUN CTION AC.
13 CVP-202 Panel Controls and T erminals Guide Control Section O [EASY PLA Y] .............................................. page 105 P [NEXT NO TE] ............................................. page 105 a [SOUND REPEA T] .............................
14 CVP-202 The Clavinova features a total of 50 demo songs: 4 feature songs, 24 special pieces showcasing the voices, and 22 pieces showcasing the styles. Listen to them all and hear what the Clavinova can do. X Select the desired play mode. .........
15 CVP-202 (B) To listen to a voice demo, press the VOICE button corre- sponding to the desired voice category. ➔ Pla yback star ts from the first demo song for the selected category . The lamp of the corresponding VOICE button flashes. There are two demo songs for each voice category.
16 CVP-202 Y ou will ref er to the LCD display frequently as y ou operate your Clavino va. This section consists of a shor t tutorial that will help you learn how to read the LCD displa y and use the related controls. Many of the Cla vinov a’ s functions are displayed at the bottom of the LCD.
17 CVP-202 There are sev eral ways to change a function’ s v alue. Her e are two of the main ways: ■ Using the data dial or [ – ] and [+] b uttons ................................. Once you hav e selected a function, you can change its setting with the data dial or the [–] and [+] buttons.
18 CVP-202 Y ou can use either of the methods descr ibed previously to change the current v oice selection. Just press RIGHT1 VOICE and hold the button do wn, or use the da ta dial or the [+] button to scan through the options.
19 CVP-202 Using the LCD Display Controls 17 As you were trying out the piano v oices in the preceding step, you may hav e been surprised to see all the voice names suddenly replaced by an entirely dif ferent set of v oices.
20 CVP-202 If you look at the upper right corner of the LCD , you’ll notice that the FUNCTION display consists of several display pages. Press the P AGE [ > ] ke y once to open the ne xt page, which is titled FUNCTION [KEYBOARD 2]. W e’ll use the functions on this pa ge to discuss the next operation.
21 CVP-202 By pressing the LCD button under KEY TOUCH , for example, you can set the Clavino va’ s response to how hard you play . The v alue displayed in the rectangle switches from NORMAL to SOFT , then FIXED , then HARD — but the FIXED VELOCITY function remains selected.
22 CVP-202 This message will remain onscreen for about three seconds. Press the button corresponding to the settings you w ant to display before the mes- sage disappears. Here is a list of pages you can access with Direct Access: You can also press an appropriate button while holding down the [DIRECT AC- CESS] button.
23 CVP-202 The Clavino va has two sliders that let y ou adjust the over all v olume and the accompaniment or song playbac k volume. There are also settings that you can use to adjust the ke yboard volume and the v olume of each par t of the automatic accompaniment or song.
24 CVP-202 Call up the MIXER display by pressing [MIXER] . In the Mixer display , the v olume of Automatic Accompaniment and individual parts of a song can be adjusted. Press [MIXER] again (or [EXIT] ) to return to the pre vious display . There are two types of mix er display , as shown belo w .
25 CVP-202 The Cla vinova f eatures a conv enient metronome that is ideal for practicing. The procedure f or setting the metronome tempo can also be used to set the playbac k tempo f or the Auto Accompaniment (page 49) and Song (page 93) modes . Y ou can start the metronome and set the tempo from any display , including the main display .
26 CVP-202 Y ou can change the metronome’ s time signature and volume using the settings in the METR ONOME page. ■ Displa ying the Metronome Settings .............................................. T o display the METR ONOME page, press [DIRECT A CCESS] , then [METR ONOME] .
27 CVP-202 The Help mode provides con v enient explanations of the main functions of the Cla vinov a. Y ou can select help topics from a menu displa yed on the LCD , or press a button on the panel to get help inf or mation related to that control. Z Call up the Help mode .
28 CVP-202 V T urn the pa g es and read the help information. ................. Use the fourth LCD button to adv ance the page. Y ou can also press the third LCD button if you w ant to go back and read the previous page. B Exit the Help topic. .......
29 CVP-202 CHAPTER 3: V oices Selecting V oices Exiting the Display To return to the main display, press [EXIT]. Backing Up the Selected Voice • When the power is turned ON, the Grand Piano 1 voice is selected automatically. However, if the Backup function (page 152) is set to ON, the last selected voice will automatically be selected.
CVP-202 30 Y ou can also select a v oice using the RIGHT1 VOICE function in the main display . About Ensemble Voices The Clavinova’s ensemble voices are rich, dual-like voices that you can play without entering the Dual mode (page 33.) Press the [Ensemble] button to display a menu of ensemble voices.
31 CVP-202 The Clavinov a has twelve drum kits and two SFX kits , found on pages 3 and 5 of the [PERCUSSION] voice group. When one of the drum or SFX kits is selected, various drum, percussion, and special eff ect sounds ar e assigned to individual ke ys, letting you pla y the sounds from the keyboard.
CVP-202 32 X Adjust the volume of the main voice. Use the data dial or [–] and [+] buttons to c hange the volume, or hold do wn the VOLUME button to incr ease the volume. Press the [–] and [+] buttons simultaneously to restore the basic setting. ■ Setting the V olume of the Main V oice .
33 CVP-202 Playing T wo V oices Simultaneously — Dual Mode T o change the main voice while playing in Dual mode, select the RIGHT1 VOICE function then select the main voice in the nor mal manner . The Dual mode of the Cla vinov a allows y ou to select and play two diff erent voices simultaneously in a la yer .
CVP-202 34 Y ou can use the settings in the KEYBO ARD [RIGHT2] display page to change the v olume, octave, pan and detune of the v oice selected using the RIGHT2 VOICE function. The settings you make in this page affect any voices you select using the RIGHT2 VOICE function.
35 CVP-202 ■ Setting the Stereo P osition of the Second V oice ........... The PAN function in the KEYBO ARD [RIGHT2] display lets you adjust the stereo position of the second voice. Z Press the PAN b utton. ➔ The PAN function is highlighted. PAN • Settings: L — — R • Basic setting: (center) ■ Detuning the Second V oice .
CVP-202 36 T o change the main voice while playing in Split mode, select the RIGHT1 VOICE function then select the main voice in the normal manner . Changing the Main V oice in Split Mode Playing T wo.
37 CVP-202 Y ou can use the settings in the KEYBO ARD [LEFT] display page to change the v olume , octav e, and pan of the voice selected using the LEFT VOICE function. Y ou can also select the keyboar d range that is aff ected by the pedals, as well as the split point that separates the right and left ranges, using the functions in this page.
CVP-202 38 PAN • Settings: L — — R • Basic setting: (center) PEDAL • Settings: R (right only) L (left only) L+R (both) • Basic setting: R Playing T wo V oices on Different Sides of the Keyboard — Split Mode X Adjust the stereo position.
39 CVP-202 Z Press the SPLIT POINT b utton. ➔ The SPLIT function is highlighted. X Change the split point. Use the data dial or [–] and [+] buttons to change the split point, or hold down the SPLIT POINT button to mo ve the split point to the right.
CVP-202 40 Using the Pedals The Clavino va has three pedals. • Certain voices in the [PERCUSSION] and [XG] groups may not be affected by use of the damper pedal. • Some voices may sound continuously or have a long decay after the notes have been released while the damper pedal is held.
41 CVP-202 CHAPTER 4: Reverb and Other Effects Reverb Reverb ON/OFF Basic setting: Depends on voice. ➔ The lamp lights. The setting of the [REVERB] button has no effect on Song mode or Auto Accom- paniment playback. T o turn the rev erb off, press [REVERB] again.
42 CVP-202 Use the TYPE ▲ and ▼ b uttons to change the reverb type, or select the TYPE function and use the data dial or the [–] and [+] b uttons.
43 CVP-202 Reverb X Set the total depth of the re verb effect. Y ou can change the setting using the TOTAL DEPTH ▼ and ▲ but- tons, the data dial, or the [–] and [+] buttons. T o reset the value to the basic setting of 64 , simultaneously press either the TOTAL DEPTH ▼ and ▲ b uttons or the [–] and [+] buttons.
44 CVP-202 Changing the Chorus Settings Unlike the re verb (page 41) and other ef fects (page 46), which can be turned on or of f using the appropriate panel buttons, the chorus feature is alw a ys considered to be “on. ” How chorus is applied to any gi ven v oice depends on the current chorus type and depth settings.
45 CVP-202 Chorus ➔ The selected chorus type is highlighted. Because the basic setting of the chorus type depends on the accompa- niment style, the chorus type may change automatically when you select a dif f erent style. • The chorus type selection affects all keyboard parts.
46 CVP-202 ➔ The LCD displa ys either the EFFECT page or the EFFECT DEPTH page (whichev er was used most recently). V oice Effects The Clavino va has a v ar iety of eff ects besides rev erb and chor us that you can use to enhance the sound of the v oices or create wild, special eff ects.
47 CVP-202 ■ Changing the Effect T ype .......................................................................... Y ou can change the effect type selection in the EFFECT page . Select an ef f ect type using the TYPE ▲ and ▼ b uttons, or highlight the TY PE function and use the data dial or the [–] and [+] buttons.
48 CVP-202 Effect Depth functions • Range: 0 (no effect) — 127 (max.) • Basic setting: Depends on voice. X Set the effect depth. Set the ef fect depth for the highlighted part by using the data dial or [–] and [+] buttons. Y ou can also adv ance a value by pressing the corresponding LCD button.
49 CVP-202 CHAPTER 5: Accompaniment Styles Selecting Accompaniment Styles The Cla vinov a has a wide variety of musical “styles” that you can use f or simple percussion accompaniment, or as the basis of a fully orchestrated accompaniment — including bass and rh ythm par ts — using the Auto Accompaniment f eature (page 57).
CVP-202 50 X Select a style. ..........................................................................................................................
51 CVP-202 Y ou will use the A UT O A CCOMP ANIMENT buttons and the ST ART/ ST OP buttons to select style v ar iations and control style pla yback. VOLUME MASTER VOLUME ACMP / SONG VOLUME MAX MIN MAX .
CVP-202 52 T o change the variation while the style is playing, press the b utton corresponding to the ne w variation. Using the Pedals You can also use the left pedal to pause the style or play a special fill-in pattern by setting the LEFT PEDAL function (page 138) to BREAK or BREAK FIL.
53 CVP-202 ■ Synchr oniz ed Start ............................................................................................ This method lets you start the style by simply playing a note or chord on the keyboard . Z Set the Synchronized Start function.
CVP-202 54 ■ Adding an Intr oduction ................................................................................. This function lets you embellish the start of a tune by adding an intro- duction. Z Set the introduction patter n. Select the v ar iation to play the intro pattern as described on page 51, then press the [INTR O] button.
55 CVP-202 Z Press the [F ADE IN/OUT] button. Using the Pedals You can also use the left pedal to trigger a fade-in or fade-out by setting the LEFT PEDAL function (page 138) to FADE IN/ OUT. ➔ The lamp lights, and the Synchronized Start function (page 53) tur ns on automatically .
CVP-202 56 ■ Fading Out .................................................................................................................. Y ou can ha ve the style fade out and automatically stop by pressing the [F ADE IN/OUT] button.
57 CVP-202 The Clavino va includes a sophisticated A uto Accompaniment system that can provide automated rh ythm, bass and chord backing f or your perf or mance in 134 diff erent styles, as well as 36 diff erent types of piano-only accompaniment. The Auto Accompaniment playback data is normally not output by the MIDI [OUT] terminal.
58 CVP-202 Y ou may want to select an accompaniment mode (pa ge 59) before you start playing. If the accompaniment mode is set to your liking, you can start the Auto Accompaniment as follows: Z Select a style. .........................................
59 CVP-202 Y ou can change the accompaniment mode (which selects the chord indication method), the split point, and other Auto Accompaniment set- tings in the ACCOMP ANIMENT MODE display page. ■ Displa ying the A uto Accompaniment Settings .........
60 CVP-202 Accompaniment Modes • The Clavinova displays the names of the chords you play at the left edge of the main display, below the tempo. • The same accompaniment continues (even after you release the chord in the left range) until you play the next chord.
61 CVP-202 ■ Chords in Fingered 1 mode The chord types below can be played in F ingered 1 mode . For a f in- gering chart sho wing all c hords in the example ke y of C, see page 12 of the Data List.
62 CVP-202 ■ Using the Synchr onized Stop Function ................................... The SYNCHRO STOP function in the ACCOMP ANIMENT MODE display automatically stops the Auto Accompaniment when you’ re not holding do wn any keys to the left of the split point.
63 CVP-202 X Start the A uto Accompaniment. Press [ST ART/ST OP] or use the Synchronized Start function (page 53) to start the Auto Accompaniment. C Enter the chord root. ROOT function Settings: See sidebar on page 60. Use the ROOT button to select a root.
64 CVP-202 N Enter the chord. • Any chords recognized in Fingered 1 mode can be entered from the key- board. • The Clavinova displays the name of the chord recognized from the key- board at the left edge of the LCD dis- play, under the tempo.
65 CVP-202 The Clavino va has f ive accompaniment par ts: Rhythm, Bass, Chord, Pad, and Phrase. Adjusting Individual P art Lev els • The overall accompaniment playback volume can be adjusted using the [ACMP/SONG VOLUME] slider.
66 CVP-202 Playing with the Auto Accompaniment C Set the v olume level. ..................................................................................... Part volume levels • Range: 0 (min.) — 127 (max.) • Basic setting: 110 Use the data dial or [–] and [+] buttons to adjust the v olume lev el.
67 CVP-202 The Cla vinova has man y other features and functions that mak e the use of the A uto Accompaniment ev en more conv enient and enjo yab le. With these functions you can easily select panel settings to suit a cer tain type of music, ha ve the Cla vinova pla y harmony to your melody line .
68 CVP-202 Other Auto Accompaniment Functions X Sor t the list, if necessar y . ........................................................................ To display the panel setups for a specific style group, simply press the correspond- ing STYLE button.
69 CVP-202 Harmony This feature adds harmony or embellishment notes to the melody you play using the main voice in the right range of the ke yboard. The har - mony notes are produced automatically to match chords played with Auto Accompaniment. ■ Adding Harmon y .
70 CVP-202 ■ Selecting a Harmon y T ype ........................................................................ Y ou can change the type of harmony tha t is pla yed using the TYPE function in the HARMONY display . TYPE function • Settings: See table on this page.
71 CVP-202 ■ Changing the Harmony Speed ............................................................. Y ou can change the speed of the harmony notes played by the Echo , Tremolo , and Trill harmony types using the SPEED function in the HARMONY display .
72 CVP-202 One T ouch Setting Other Auto Accompaniment Functions The Clavino va’ s conv enient One T ouch Setting function makes it easy for you to select voices and ef fects that are appropriate to the style you’ re playing. Each style has four preprogrammed panel setups that you can select by pressing a single button.
73 CVP-202 The Clavino va lets y ou create custom accompaniment styles that you can recall and pla y back at an y time, just like the presets . Up to f our custom styles can be maintained in the Clavinov a’ s memor y at the same time, and an y number can be saved to disk f or later reloading and use.
74 CVP-202 Creating Y our Own Styles C Select a sour ce style. ................................................................................... Select a preset style that is close to the style you want to create. Preset style selection is carried out in the normal way (page 49).
75 CVP-202 BEAT function • Settings: 2, 3, 4, 5 • Basic setting: Depends on style. Press the BEAT button to select a dif ferent time signature. ➔ The “ Clear style? ” message is display ed.
76 CVP-202 ➔ The par t number is highlighted. If y ou hav e selected a par t other than R1 or R2 , the “ Clear part ?” message will be displayed. The R1 part is initially selected and set to record. Any part you select can be set to record by using the rightmost LCD button to select REC after selecting the par t.
77 CVP-202 < Record the selected part. .................................................................. • Playback of the custom style can be started and stopped by pressing the [START/STOP] button. (Data cannot be recorded while playback is stopped.
78 CVP-202 ? Repeat until the custom style is complete. .......................... > Quantize the recorded part, if necessary . .............................. Y ou can “tighten up” the timing of a recorded part by using the PART QUANTIZE functions in page 2 of the CUSTOM STYLE displa y to align all the notes to a specif ied beat.
79 CVP-202 Use the > LCD button to position the underline cursor at the charac- ter you want to change (style names can be up to 12 characters in length). Use the data dial and/or the [–] and [+] buttons to select the char - acter you want to enter from the list in the center of the display , then press the CH.
80 CVP-202 In addition to the v arious functions described in the basic custom style recording procedure, abov e, the CUSTOM STYLE display pages include se veral other functions that you may find useful when creating custom styles. ■ RECALL SECTION function .
81 CVP-202 ■ V olume and Effects ......................................................................................... Page 4 of the CUST OM STYLE display includes sev eral functions that let you set the volume, re verb, chorus type and depth, and pan for each part of each custom style section.
82 CVP-202 V Set the value or depth of the selected parameter . • The reverb type used for the custom style are determined by the style that was selected as the basis for custom style creation. • Normally the VALUE and chorus TYPE settings from the preset style are ini- tially selected.
83 CVP-202 Custom styles must be stored in the Clavino va’ s memory before they can be sav ed to a disk. If a custom style has not been stored and you at- tempt to sav e it to disk, the “ Store in memory before saving to disk ” message will be displayed.
84 CVP-202 Once created, your original custom styles can be selected for play- back by pressing the [DISK/CUST OM] button, then using the STYLE ▲ and ▼ LCD b uttons, the da ta dial, or the [–] and [+] buttons to select the custom style you want to play .
85 CVP-202 Use the MEMORY No. ▼ and ▲ buttons to select the style you want to delete, then press OK to delete the style, or CANCEL to cancel the operation.
86 CVP-202 Y ou can load and pla y style files created in the Style File F or mat either from optional Y amaha “Style File” disks, or from disks containing custom style files you’v e created yourself .
87 CVP-202 X Select a style file . .............................................................................................. • If a tempo is set prior to loading the style, that tempo becomes the default for the loaded style. • Some styles are too large to preview with the LISTEN function.
88 CVP-202 Playing Loaded Style Files Using Style Files V Eject the disk when y ou’ re done . .................................................... CAUTION The [DISK IN USE] lamp will light while the style is being loaded. NEVER attempt to remove a disk while the [DISK IN USE] lamp is lit.
89 CVP-202 The Registration f eature lets you store complete panel setups that you can recall whene v er needed. A total of 20 setups (5 banks containing 4 memories each) can be registered in the Cla vinov a’ s memor y .
90 CVP-202 C Register the panel setup. .......................................................................... Registration Memory • Range: 1 — 4 (each bank) • Basic setting: None While holdi.
91 CVP-202 ➔ The number of the recalled registration appears ne xt to the bank name in the upper left cor ner of in the main displa y . A pencil icon will appear to the right of the registration number in the display as soon as any change is made to the panel b uttons or settings.
92 CVP-202 X Indicate the categories to be fr oz en. ............................................ Freeze Categories • Settings: ON, OFF • Basic setting: ON (ACMP SETTING) OFF (others) Backup of la.
93 CVP-202 D I S K IN U S E CHAPTER 7: Song Control Song Playback The Clavino va can pla y back songs recorded using the Song Record function (page 110), as well as song data included on v arious commercially av ailable software disks . Y ou can also pla y along on the ke yboard as the songs play bac k.
94 CVP-202 ➔ The DISK IN USE lamp lights while the Cla vinov a reads and iden- tifies the disk. Once the disk has been identified, the SONG PLA Y [MAIN] displa y (display page 1) appears and the [SONG] lamp lights. If a song disk has been inserted but the Song Play mode is not en- gaged, press the [SONG] b utton.
95 CVP-202 Use the P A GE [ < ] and [ > ] buttons to call up the SONG PLA Y [LIST] display (display page 3), to vie w the entire list of the song names in the disk. The desir ed song can be selected easil y by using the data dial or the [–] and [+] b uttons.
96 CVP-202 ● Adjusting the Tempo The playback tempo of the song can be changed as desired. (See page 25.) The preset tempo for the selected song can be restored at an y time by simultaneously pressing the TEMPO [–] and [+] buttons. Usually the tempo is indicated by numbers.
97 CVP-202 The 1/RIGHT (right hand), 2/LEFT (left hand) and ORCH (accom- paniment) buttons in the SONG PLA Y [MAIN] display can be used to turn playback of the corresponding parts on or of f . The b uttons are high- lighted when the parts are turned on.
98 CVP-202 X Select the desired track f or playback (PLA Y/OFF , SOLO). Select the track by using the TRACK < and > buttons, the data dial, or the [–] and [+] buttons.
99 CVP-202 The playback voice can only be changed when playback is stopped at the top of the song. ■ Selecting V oices f or 1/RIGHT and 2/LEFT Parts The playback voices for the 1/RIGHT and 2/LEFT parts can be se- lected in the SONG PLA Y [L&R V OICE] display .
100 CVP-202 Z Select the trac k to be changed. ........................................................ Select the desired track by pressing TRACK < or > . Selecting TO- TAL will change the ov erall settings of the song rather than the settings of indi vidual tracks.
101 CVP-202 X Select the parameter to be edited. ................................................. Press SELECT ▼ or ▲ to select the desired parameter . Current value for the selected track Depending on the file type, voice changes may only be possible for tracks 1 and 2.
102 CVP-202 ■ Phrase Repeat ...................................................................................................... When playing back Y amaha software that includes special phr ase ma.
103 CVP-202 While the song is playing back, press the A ➔ button once at the beginning of the section to be repeated. ➾ Then, press the B button at the end of the section to be repeated. Repeat playbac k of the specified section (from point A to point B) will begin automatically .
104 CVP-202 Playing Other T ypes of Music Data ■ About Compatible Software .................................................................. The CVP-202 can play back the follo wing types of software.
105 CVP-202 The Clavino va has a special Guide function which allows y ou to practice by using the appropriate disk software . The “piano roll” display and the k eyboard guide lamp indicate which k eys you should play , and when you should pla y them.
106 CVP-202 ■ Practicing Phrase-b y-Phrase with the Pla yback: Sound Repeat ....................................................................................................... In the Sound Repeat method, the Clavino va plays back a short phrase.
107 CVP-202 X Select the Guide method. ........................................................................ Press one of the GUIDE CONTR OL buttons: [EASY PLA Y] , [NEXT NO TE] or [SOUND REPEA T] .
108 CVP-202 • Playback tempo can be set to any desired value after a song has been selected by using the TEMPO [ – ] and [+] buttons. • The Guide function may not work properly with software which was not produced for independent left- and right-hand playback.
109 CVP-202 ■ Setting the Sound Repeat Number ............................................. T o set the number of times the phrase is repeated in the Sound Re- peat mode, press the SOUND REPEAT button.
110 CVP-202 The Clavino va f eatures comprehensive song recording func- tions that allow y ou to record your own perf or mances to floppy disks. Three recording methods are av ailable: Quick Recording.
111 CVP-202 Song Recording Before you can record to the included blank disk, you will hav e to format it. Commercially av ailable blank disks must also be formatted for use. Y ou can use the F ormat function in the FUNCTION [DISK 5] display (page 146) to re-format floppy disks that ha ve already been used for recording.
112 CVP-202 Z Insert a formatted disk. ............................................................................... Make sure that the disk’ s write protect tab is set to the “write” posi- tion, then insert the disk face up with the shutter forw ard until it clicks into place.
113 CVP-202 C Select the Song Recor d mode . .............................................................. Press the [REC] button. ➔ The [REC] lamp lights and the QUICK RECORD displa y (Record mode page 1) appears. Call up page 1 by using the P A GE [ < ] and [ > ] buttons if the lamp is lit but the Q UICK RECORD display is not shown.
114 CVP-202 B Select the desired v oices and style, etc. ................................. Select the voices and accompaniment style and set the tempo in the normal way , and other settings needed.
115 CVP-202 M Stop recording. ................................................................................................ Press the [PLA Y/STOP] b utton. ➔ Recording stops. When the recorded data has been written to disk, the [REC] lamp goes out and the SONG PLA Y display ap- pears.
116 CVP-202 C Select the desired trac k for recording. ...................................... Press the TRACK < and > b uttons or use the data dial or [–] and [+] buttons to select the track. • Track 10 (and 9, in some cases) can only be used to record the rhythm sound of the accompaniment style and cannot be used to record keyboard part.
117 CVP-202 V Set all performance f eatures as required. .......................... After setting the tracks to be recorded, set up all necessary perform- ance features as required: voice , accompaniment style, tempo, re verb, etc. B Star t recording.
118 CVP-202 N Stop recor ding. ................................................................................................ Press the [PLA Y/STOP] b utton. ➔ Recording stops. The [REC] lamp goes out when the data has been written to the disk, and the SONG PLA Y displa y appears.
119 CVP-202 X P ause before the punc h-in point. ................................................. Press the [P A USE] button to pause play back a bit before the point at which you want to star t recording. Leave a measure or more before the punch-in point so you’ll be able to grasp the timing before you punch in.
120 CVP-202 B Select the punch-in mode. ....................................................................... Select the desired punch-in mode with the fourth LCD b utton. T wo modes are a vailable, as described belo w . 1ST KEY Recording begins as soon as the first key is played, after Punch-in playback is started in step 7 (below).
121 CVP-202 The Chord Sequence function lets you enter A uto Accompani- ment data step-by-step according to chord names . Y ou can use this function to record the accompaniment par t without having to pla y the song in time with the rhythm or at a cer tain tempo .
122 CVP-202 Changing the Auto Accompaniment Mode Auto Accompaniment cannot be turned off while the Chord Sequence function is active. However, you can select an ac- companiment mode (other than Full Keyboard) in the ACCOMPANIMENT MODE display by pressing [DIRECT ACCESS] followed by the [ACMP ON] button.
123 CVP-202 V Enter and set the chor ds and/or style changes. .......... T o enter a chord, either play the chord with appropriate fingering in the left range of the keyboard (lo wer than the split point), or highlight ROOT or TYPE in the LCD display and use the data dial or [–] and [+] buttons.
124 CVP-202 B Stop recor ding. .................................................................................................... When all recording has been finished, select pag e 2 of the CHORD SEQUENCE display , then press the END MARK and SET buttons and input an “end mark” which determines the location of the ending.
125 CVP-202 ■ END MARK .................................................................... T o enter an “end mark” at the current cursor location, press the END MARK b utton followed by the SET button. An end mark signifies the end of the song, and should always be entered to properly end each song.
126 CVP-202 The Record mode has a number of other con venient editing functions that provide e ven g reater control over the song data. The Record Edit functions include: Setup Memor y , which lets yo.
127 CVP-202 Z Enter the desired name . ......................................................................... Use the > button to mo ve the underline cursor to the desired char- acter position in the file name display . (File names can be up to 12 characters in length).
128 CVP-202 Z Specify the tw o tracks to be mixed. .............................................. Press the TRK A and TRK B buttons to highlight the cor responding functions, and use the da ta dial or [–] and [+] b uttons to select the numbers of the two tr acks to be mixed.
129 CVP-202 X Execute the Delete operation. .......................................................... Press the DELETE button. When the “ Are Y ou Sure?” message is displayed, press YES to execute the Delete oper ation or NO to cancel. The DELETE function will be replaced by the UNDO function af- ter the Delete operation is ex ecuted.
130 CVP-202 C Execute the Quantize operation. ...................................................... Press the QUANTIZE button. When the “ Are you sure? ” mes- sage is displayed, press the YES button to e xecute the Quantize operation or NO button to cancel.
131 CVP-202 Z Select the trac k to be edited. ............................................................ Select the track whose parameters you wish to change by pressing the TRACK < or > b utton. If TOTAL is selected, any changes will af fect the entire song rather than an indi vidual track.
132 CVP-202 B Exit the Initial Edit function. .................................................................. T o do this, press the [REC] button. ➔ The [REC] lamp goes out and the Initial Edit operation is com- pleted. Y ou can also exit the Initial Edit function by pressing the [EXIT] button.
133 CVP-202 131 The Clavinov a has about 26 KB of internal memor y that you can use to record a limited amount of song data — approximately 2,500 notes, if no other data is recorded — without using a flopp y disk. About the CVP MEMOR Y Song • Chord Sequence data (page 121) cannot be recorded to internal memory.
134 CVP-202 The Function mode provides v arious advanced functions that, f or example , let you mak e v arious MIDI settings, or give y ou greater , more conv enient control over disk-related operations . These sophisticated functions let you customiz e the Clavinov a to y our own musical needs and pref erences.
135 CVP-202 ■ Using the Utility Functions ....................................................................... As the table on the preceding page sho ws, the utility functions are di vided among 16 displa y pages. Use the follo wing procedure to display the page containing a desired function.
136 CVP-202 ■ T une .................................................................................................................................... Keyboard FUNCTION [KEYBO ARD 1] Display — page 1 TUNE • Range: 414.8 Hz — 466.6 Hz (–102.
137 CVP-202 KEY TOUCH • Settings: See table at left. • Basic setting: NORMAL FIXED VELOCITY • Range: 1 — 127 • Basic setting: 76 ■ Ke y T ouch & Fixed V elocity .
138 CVP-202 ■ Left P edal & Glide Range ........................................................................... Pedal FUNCTION [PED AL] Display — page 3 LEFT PEDAL • Settings: See table at left. • Basic setting: SOFT LEFT PEDAL Settings Setting Description SOFT The left pedal functions as the soft pedal (basic setting).
139 CVP-202 137 ■ Registration & Setup Files ........................................................................ Y ou can use the functions on this page to load, sav e, delete, and re- name data files containing r egistration data (page 89) or panel setup data.
140 CVP-202 X Select the f ile operation. File operations cannot be performed while the [SONG] lamp is lit. Exit the Song mode before attempting to perform a file function. Use the second LCD button from the right to select the desired f ile opera- tion: LOAD , SAVE , DELETE or NAME .
141 CVP-202 Disk 139 Press the CH.SET button to input the selected characters at the current underline position of the file name . Contin ue moving the cursor to other characters or marks and entering them in this way . T o delete the character at the previous position, press the BACK b utton.
142 CVP-202 ■ Song Cop y & Disk Copy .............................................................................. FUNCTION [DISK 2] Display — page 5 The Song Copy and Disk Copy functions cannot be executed while the [RECORD] lamp is lit. Exit the Song Record mode before attempting to copy a song or disk.
143 CVP-202 C Select the destination song number . If you selected DISK1 — 1 as in step 1, press the SONG button, then use the data dial or [–] and [+] b uttons to select a destination song number between 1 and 60 . (Song numbers abov e 60 cannot be se- lected.
144 CVP-202 ■ Song Delete ............................................................................................................... FUNCTION [DISK 3] Display — page 6 The Song Delete function cannot be executed while the [RECORD] lamp is lit.
145 CVP-202 ■ Song Data T ransform ....................................................................................... FUNCTION [DISK 4] Display — page 7 The Song Data Transform function can- not be used while the [SONG] lamp is lit. Exit the Song mode before attempting to transform song data.
146 CVP-202 ■ Disk Format .............................................................................................................. Floppy disks must be correctly formatted before the Clavino v a can use them for data storage.
147 CVP-202 ■ Send Channel (Ke yboard) ......................................................................... MIDI FUNCTION [MIDI 1] Display — page 9 SEND CH • Settings: OFF, 1 — 16 • Basic setting: See table at left.
148 CVP-202 ■ Synchr onization .................................................................................................... MIDI SYNC. • Settings: INT. (internal clock), EXT. (external clock) • Basic setting: INT. The playback tempo of a song or style is normally controlled by the Cla vinova’ s internal clock.
149 CVP-202 ● Control Change Messages CONTROL • Settings: Tx&Rx (transmitted/received), OFF • Basic setting: Tx&Rx Control change messages are used for v arious non-keyboard perform- ance controls, such as the damper pedal, or for expressi ve control of the sound of a connected MIDI de vice, such as effects and v olume.
150 CVP-202 ■ Send Channel (Accompaniment/Harmon y) ............................ SEND CH (ACMP&RHY) • Settings: OFF (not transmitted), 9–16ch (transmitted) • Basic setting: OFF SEND CH (HA.
151 CVP-202 • When transmitting rhythm, accompani- ment, or harmony part data via MIDI, do not select the MIDI channels used by these parts as the send channels (page 147) used to transmit the data for your keyboard performance. Doing so may result in your keyboard per- formance data being mixed with the Auto Accompaniment or Harmony data.
152 CVP-202 ■ Bac kup ............................................................................................................................ Backup FUNCTION [B A CKUP 1] Display — page 13 Ba.
153 CVP-202 ■ Recall ................................................................................................................................ This function can be used to recall the initial factory settings (basic settings) for a group of parameters, or for all parameters at once.
154 CVP-202 The Micro T uning Feature makes it possible to indi vidually tune each ke y of the keyboard. The created tuning can be saved to a disk and loaded whenev er necessary . The currently loaded custom tuning can be turned on or of f at any time by using the leftmost LCD b utton in this display .
155 CVP-202 X Select the desired f ile operation. Use the second LCD button from the right to select the desired f ile operation: LOAD , SAVE , DELETE or NAME . C Press the START b utton. After the START button is pressed, the displa y corresponding to the selected file oper ation appears.
156 CVP-202 C Set the tuning. TUNE • Range: -64 cent — +63 cent • Basic Value: 0 (all keys) Z Select PRESET with the leftmost LCD button. ➔ The f ollowing displa y appears: X Select a scale. Press the SCALE ▼ or ▲ to highlight the par ameter , then use the data dial or [–] and [+] b uttons to select the temperament type.
157 CVP-202 LOAD See page 140. SAVE See page 140. DELETE See page 141. NAME See page 141. ■ User Scale Files ................................................................................................... The custom scale can be named and sav ed to disk as a user scale file.
158 CVP-202 The Clavino va is equipped with jacks that let y ou connect a variety of audio devices . Y ou can connect headphones, a stereo system, or P A equipment for audio output, as well as input from a tone generator or other instrument.
159 CVP-202 ■ A UX OUT Jacks .................................................................................................... By connecting audio cables to the A UX OUT jacks as shown here, you can output the sound of the Clavino va to a stereo system, amplifier , mixing console, or recording equipment.
160 CVP-202 Use MIDI cables to connect the MIDI terminals on the Clavino va to other MIDI de vices. The Clavino va’ s MIDI terminals are located at the left of the unit on the rear panel. T one genera tors or other de vices to be controlled by the Clavino va can be connected to the MIDI [OUT] terminal.
161 CVP-202 Data Connections 159 ■ Connecting the serial port on the computer to the Clavino va’ s [T O HOST] jack .................................................................................. Connect the computer’ s serial port (RS-232C or RS-422) to the Cla vinova’ s [TO HOST] jack.
162 CVP-202 ■ Connecting the computer’ s USB por t to the Clavino va via a USB interface, such as the UX256, UX96, or UX16 .................. Connect the computer’ s USB port to the USB interface (such as the UX256, UX96, or UX16) using a USB cable.
163 CVP-202 APPENDICES Effect T ype Lists 161 The tables in this appendix contain descriptions of the v ar ious re verb , chorus, and eff ect types that are av ailable f or use on the CVP-202.
CVP-202 164 ROTARY SP1 ROTARY SP2 ROTARY SP3 ROTARY SP4 ROTARY SP5 ROTARY SP6 ROTARY SP7 ROTARY SP8 ROTARY SP9 ROTARY SP10 TREMOLO1 TREMOLO2 TREMOLO3 TREMOLO4 GT TREMOLO1 EP TREMOLO EP TREMOLO2 AUTO P.
165 CVP-202 This message appears when you try to perform an operation (such as selection of a style or Music Database setup) that cannot be perf or med dur ing playbac k. ➾ Stop song pla yback, or exit the Song Pla y mode, then perf or m the operation again.
CVP-202 166 An error occurred while writing to (as in recording or stor ing files) or reading from the disk. ➾ T r y the operation again after pressing the OK button. If the error occurs a second time, the disk or the disk driv e unit may be faulty .
167 CVP-202 ● Custom Style Mode This message appears when you e xecute an operation, such as pla yback of disk softw are, that will cause the Clavinov a to delete data recorded to the internal memor y . ➾ Press YES to delete the data recorded to the inter nal memor y , then perform the desired operation.
CVP-202 168 ● Song Copy & Disk Copy This message appears before y ou star t a Song Cop y or Disk Copy operation to inf or m you of the number of times the disks must be e xchanged. (See page 143.) This message prompts you to insert the destination disk when copying data from one disk to another .
169 CVP-202 ● Hardware-related ● Song Data Conversion When you first insert the destination disk while copying a song from one disk to another disk, this message prompts you to specify the song number to which the song is to be copied. (See page 143.
CVP-202 170 Problem The Clavino va does not turn on. A click or pop is heard when the power is turned on or of f. Noise is heard from the Cla vinova’ s speakers. The display is too bright or too dark to read. The keyboard v olume is low com- pared to that of the A uto Accompa- niment or song playback.
171 CVP-202 The Auto Accompaniment does not play back. The desired chord is not recognized or output by the Auto Accompani- ment. The maximum of 60 songs cannot be recorded. Some tracks do not play back when playing back data. The Auto Accompaniment is not turned on.
CVP-202 172 MIDI and Data Compatibility ■ MIDI MIDI (Musical Instrument Digital Interface) is a worldwide standard communication interface that allo ws MIDI-compatible musical instruments and equipment to share musical information and control one another .
173 CVP-202 Index A Accompaniment Mode .................... 57, 59-61 accompaniment styles ................ see “ styles ” All Setup files .................................... 139-141 audio connections ............................. 158-159 Auto Accompaniment .
CVP-202 174 Q quantizing .................................... 78, 129-130 Quick Recording ............................... 112-115 R Recall ....................................................... 153 Recall Section .....................................
FCC INFORMA TION (U .S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions con- tained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product.
WARNING- When using any electrical or electronic prod- uct, basic precautions should always be followed. These pre- cautions include, but are not limited to, the following: 1.
__ __ __ For details of products, please contact your nearest Y amaha or the authorized distributor listed belo w . Pour plus de d é tails sur les produits, v euillez-vous adresser à Y amaha ou au distributeur le plus proche de v ous fi gurant dans la liste sui vante.
M.D.G., Pro Audio & Digital Musical Instrument Division, Yamaha Corporation © 2003 Yamaha Corporation W A54840 3??PO???.?-01A0 Printed in Indonesia Clavinova Web site (English only) http://www .yamahaclavinova.com/ Y amaha Manual Library http://www2.
デバイスYamaha CVP-202の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Yamaha CVP-202をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはYamaha CVP-202の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Yamaha CVP-202の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Yamaha CVP-202で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Yamaha CVP-202を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はYamaha CVP-202の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Yamaha CVP-202に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちYamaha CVP-202デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。