YamahaメーカーDMEの使用説明書/サービス説明書
ページ先へ移動 of 22
DME Setup Manual 1 DME Setup Manual This manual describes the process of setting up a DME system, fr om making the initial DME processor settings (DME64N / DME24N / DME8i-C / DME8o-C / DME4io-C / DME8i-ES / DME8o-ES / DME4io-ES) to synchronizing with the DME Designer application installed on a computer .
DME Setup Manual 2 Begin by downloading the DME Designer Combo Installer and the USB-MIDI Driver from the “Downloads” page on the Y amaha Pro Audio website.
DME Setup Manual 3 ●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●.
DME Setup Manual 4 ●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●.
DME Setup Manual 5 ■ Windows 2000 1 Start the computer and log on with administrator privileges while power to the DME is off. 2 Select [My Computer] ➞ [Control P anel] ➞ [System] ➞ [Hard ware.
DME Setup Manual 6 After connecting the computer to the DME unit via a USB cable, the Device Group and IP addr ess for each DME unit can be individually set from the DME Designer . n These parameters can also be set directly via the panel contr ols and displays of the DME64N and DME24N ( page 19 ).
DME Setup Manual 7 6 From the DME Designer main panel, clic k [P ort] in the [Setup] menu to open the P or t dialog bo x. 7 Select “Y AMAHA USB OUT 0-1” or “Y amaha DME NETWORK-1” in the [Tx] field, and “Y AMAHA USB IN 0- 1” or “Y amaha DME NETWORK-1” in the [Rx] field, and clic k [OK].
DME Setup Manual 8 4 Master ID When a device is assigned as a Slave in Master/Slave ( 2 ) above, this sets the host address for the Master device in that group. This parameter cannot be set for the Master device. 5 Link Mode Make sure that “100Base-TX” is selected.
DME Setup Manual 9 These settings must be made when DME devices are connected via Ethernet cables. ●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●.
DME Setup Manual 10 9 Enter y our computer’ s IP address into [IP address], the Gateway’ s IP address into [Default gatewa y], and “255.255.255.0” into [Subnet mask].
DME Setup Manual 11 ●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●.
DME Setup Manual 12 ●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●.
DME Setup Manual 13 3 As necessary double-clic k placed DME object to open the DME configuration window . Individual audio components can be placed and wired together as necessary to create “configurations” in the configuration window . For this example you can leave the configuration empty .
DME Setup Manual 14 ●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●.
DME Setup Manual 15 7 Click the [Sync hronization] item in the main panel windo w [T ools] menu to open the Synchronization dialog bo x. DME objects placed in the DME Designer application will be displayed in the [DME Designer] list on the left, and DME devices connected to the network will be displayed in the [Network] list on the right.
DME Setup Manual 16 10 Select the [DME Designer -> Device] b utton, then click [OK] and the DME Designer configuration will be transferred to the DME de vice . When synchronization has finished the [Go On-line] button will be grayed out and the main panel window [On-line] button will light.
DME Setup Manual 17 The USB-MIDI Driver cannot be installed. • Is the USB cable connected correctly? • Is the USB function enabled on y our computer? When you connect the DME to the computer for the first time, if the “Add New Hardwar e Wizard” does not appear , the USB function on the computer may be disabled.
DME Setup Manual 18 When controlling the DME fr om your computer via Ethernet, the DME does not operate correctly . • Is the Ethernet cable connected correctly? • Is the DME-N Network Driver set u.
DME Setup Manual 19 ●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●.
DME Setup Manual 20 ●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●.
DME Setup Manual 21 devices added to the T arget Device List ( 1 ) by pressing the [NEW] or [DUPLICA TE] buttons will only actually be register ed for communication with the DME-N Network Driver when the [Apply] button is pressed. 3 [Adv anced Settings] Button Opens the “Advanced Settings” window .
DME Setup Manual 22 A TTENTION PLEASE READ THIS SOFTW ARE LICENSE AGREEMENT (“AGREEMENT”) CAREFULL Y BEFORE USING THIS SOFTW ARE. YOU ARE ONL Y PERMITTED TO USE THIS SOFTW ARE PURSUANT TO THE TERMS AND CONDITIONS OF THIS AGREEMENT . THIS AGREEMENT IS BETWEEN YOU (AS AN INDIVIDUAL OR LEGAL ENTITY) AND Y AMAHA CORPORA TION (“Y AMAHA”).
デバイスYamaha DMEの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Yamaha DMEをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはYamaha DMEの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Yamaha DMEの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Yamaha DMEで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Yamaha DMEを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はYamaha DMEの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Yamaha DMEに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちYamaha DMEデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。