YamahaメーカーDVD-C940の使用説明書/サービス説明書
ページ先へ移動 of 34
STANDBY ON NATURAL SOUND DVD SACD PLAYER SACD MULTI CH REPEAT DISC PLAY CHANGE 23 5 4 1 D VD / SA CD CHANGER LECTEUR DE D VD / SA CD CHANGEUR D VD-C940 OWNER’S MANUAL MODE D’EMPLOI U.
This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit. This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included.
FCC INFORMATION (for US customers) 1. IMPORT ANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Y amaha may void your authority , granted by the FCC, to use the product.
CAUTION: READ THIS BEFORE OPERA TING YOUR UNIT . 1 To assure the finest performance, please read this manual carefully . Keep it in a saf e place for future reference. 2 Install this unit in a w ell ventilated, cool, dr y , clean place — awa y from direct sunlight, heat sources, vibration, dust, moisture, or cold.
1 English Introduction Supplied accessories ..................................................2 Notes about discs ......................................................2 Cleaning discs...................................................................
2 Thank you for purchasing this YAMAHA DVD/ SACD player. This Owner’s Manual explains the basic operation of this player. Supplied accessories – Remote control – Batteries (two AA size) for remo.
3 English Reality reproduced: Super Audio CD The future in digital sound reproduction is no longer limited to a close simulation of reality. The new audio standard IS reality! The human ear is no longer capable of distinguishing audible reality from digital reproduction.
4 Front Panel * Press button for about two seconds. STANDBY ON NATURAL SOUND DVD SACD PLAYER SACD MULTI CH REPEAT DISC PLAY CHANGE 23 5 4 1 ST ANDBY/ON – to switch the play er to standby mode or ON .
5 English Rear Panel Caution: Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the player.
6 Remote Control * Press and hold button for about two seconds. DISC SKIP SOUND MODE T C DIMMER 23 1 5 46 8 79 0 RETURN RESUME CD TEXT BIT RATE MENU ON SCREEN ENTER OK STOP P AUSE PLAY ANGLE ZOOM AUDI.
7 English General Notes on connections Never make or change connections with the power switched on. ● Depending on the equipment you wish to connect, there are various ways you could connect this player. Possible connections are shown in the following drawings.
8 MIXED 2CH jacks Use audio/video cable supplied with this player to connect the L (left) and R (right) jacks to corresponding input jacks of your audio equipment such as Stereo amplifier.
9 English Use commercially available coaxial cables. Receiver (and TV) with component input is required. Observe the color of each jack when connecting. If your receiver does not have component output jacks, connecting the player’s component output directly to your TV’s component input can reproduce better video image.
10 Inserting batteries into the Remote Control 1 Open the battery cover. 2 Insert batteries (AA size) with the correct polarity as indicated by the + and - symbols inside the battery compartment. 3 Close the cover. CAUTION! – Remove batteries if they are exhausted or not to be used for a long time.
11 English Menu Bars on TV Screen ● Operations can be carried out directly via the multiple menu bars on the TV screen. ● The following functions are available via the menu bars.
12 Picture – TV Shape Select the aspect ratio of the TV to be connected. 16:9 ➜ when you connect a wide-screen TV to this player. 4:3 LETTER BOX ➜ when you connect a normal TV to this player. Displays a wide picture with black bands displayed on the upper and lower portions of the TV screen.
13 English – Adv. Picture Options (on COMPO- NENT 480p VIDEO OUT only) ● DCDi - can be set to On (Y) or Off (N). ● True Life - produces a more dynamic picture by increasing the picture contrast and the color intensity.
14 Notes: – Multichannel output and downmixed stereo output are not available simultaneously. – When multichannel is selected as analog output. The MIXED 2CH (Left/Right) will deliver the Center channel data and not the downmixed Left/Right. In some cases, the sound volume will be reduced.
15 English – Speaker settings Allows you to select speaker settings, volume balance and delay time, and to test the speaker settings. Speaker settings are only active on the Multi- Channel Audio Out outputs for both DVD and SACD. Speaker settings will not be used during playback in the SACD Stereo mode.
16 Delay times The DVD player is set to reproduce correctly synchronized Digital Surround Sound in a listening area where the surround speakers are about 150cm nearer to the listening position than the front speakers, and the center speaker is in line with the front speakers.
17 English Features – Access Control Access Control contains the following features: Child Lock - When Child Lock is set to ON, a 4- digit code needs to be entered in order to playback discs. Parental control - Allows the conditional presentation of DVDs containing Parental Control information (see ‘Access Control’ section) .
18 Basic Playback 1 Press STANDBY/ON on the front panel. 2 Press OPEN/CLOSE / on the front panel to open disc loading tray. 3 Place the chosen discs in the tray, with the label facing up. 4 Press PLAY B . ➜ The disc tray closes and playback starts automatically with all the loaded discs on the tray in sequence.
19 English Video CD and Super Video CD The current VCD 2.0 and Super Video CD 1.0 standard features are: Support following VCD and SVCD formats: Following formats can’t be supported in VCD: – HQ-VCD is encoded at 2.4Mbps or 2.6Mbps – XVCD (eXtended VCD) with higher resolution and data rate.
20 1 Press STOP to stop the playback. 2 Press SOUND MODE to toggle between SACD multi channel, SACD stereo and CD layers (depending on availability of the mode on the disc). ➜ The mode change will be indicated on the player front display. Playing an Audio CD ● Audio CDs contain only TRACKS.
21 English Special VCD & SVCD Features Playback Control (PBC) Playback control is a feature on some Video CDs / Super Video CDs that enables interactive use. Video CD discs with Playback Control features enables user to access a selected track directly from the menu.
22 Slow Motion 1 Select in the menu bar and press 4 . ➜ Playback will pause. 2 Use 1 / 2 to select the required speed: –1, –1/2, –1/4 or –1/8 (backward), or +1/8, +1/4, +1/2 or +1 (forward). 3 Select 1 to play the disc at normal speed again.
23 English Shuffle Across All Discs Shuffle feature plays all tracks on all loaded discs on the disc tray in random sequence. 1 Press SHUFFLE repeatedly during playback. ➜ SHUFFLE, SHF ALL DSC, SHUFFLE OFF appears continuously on the front display for about 3 seconds.
24 Storing album/title 1 Press 4 to select ALBUM/TRACK. Albums are for MP3 discs and Tracks for S(VCD). 2 Use 2 and 1 to select the require Album/Track. 3 Press ENTER/OK to store the entire selected Album/Track. ➜ The Album/Track. number will be added to the program list.
25 English MP3 Disc Features Support following MP3-CD formats (Joliet format): ● Max. 64 characters (file names or directory) ● Max. nested directory is 8 levels ● The max. album (directory) number is 100 ● Supported VBR bit-rate ● Supported sampling frequencies for MP3 disc are: 32 kHz, 44.
26 Child Lock Activating/deactivating the Child Lock 1 When disc playback is stopped, select ACCESS CONTROL in the Personal Preferences menu using 3 / 4 . 2 Enter a 4-digit code of your own choice twice. 3 Move to “CHILD LOCK” using 3 / 4 . 4 Move to Ç / É using 2 .
27 English Activating/Deactivating Parental Control 1 When disc playback is stopped, select ACCESS CONTROL in the Personal Preferences menu using 3 / 4 . 2 Enter your 4-digit code. If necessary, enter the code a second time. 3 Move to Parental Control using 3 / 4 .
28 WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair.
29 English PLAYBACK SYSTEM DVD Video SACD multichannel and SACD stereo DVD+RW DVD+R Video CD and SVCD CD (CD-R and CD-RW) MP3 CD TV STANDARD (PAL/50Hz) (NTSC/60Hz) Number of lines 625 525 Playback Multistandard (PAL/NTSC) VIDEO PERFORMANCE YUV output Y: 1Vpp into 75 ohm Pr/Cr Pb/Cb: 0.
Y AMAHA CORPORA TION 3139 246 12091 Printed in China YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.
デバイスYamaha DVD-C940の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Yamaha DVD-C940をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはYamaha DVD-C940の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Yamaha DVD-C940の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Yamaha DVD-C940で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Yamaha DVD-C940を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はYamaha DVD-C940の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Yamaha DVD-C940に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちYamaha DVD-C940デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
