YamahaメーカーMDX-E300の使用説明書/サービス説明書
ページ先へ移動 of 28
MDX-E300 O WNER’S MANU AL MODE D’EMPLOI BEDIENUNGSANLEITUNG BR UKSANVISNING MANU ALE DI ISTR UZIONI MANU AL DE INSTR UCCIONES GEBRUIKSAANWIJZING Minidisc Recorder Lecteur Enregistreur de Minidisc GB Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE.
1 T o assure the finest performance, please read this manual carefully . Keep it in a safe place for future reference. 2 Install this unit in a well ventilated, cool, dry , clean place away from direct sunlight, heat sources, vibration, dust, moisture or cold.
1 English FEATURES • MINI DISC digital audio system • Digital optical input (2)/output • Sampling rate converter • EDIT function CONTENTS FEA TURES .............................................. 1 SUPPLIED ACCESSORIES ....................... 2 NOTES ABOUT MINIDISCS .
2 SUPPLIED ACCESSORIES Check that the following items are included. • Remote control • Batteries (AA, R6, UM-3) • Optical cable • System control cable • Audio pin cable NOTES ABOUT MINIDISCS.
3 English NAMES OF BUTTONS AND CONTROLS Fr ont panel 1 STANDBY/ON (P.9) 2 Disc insertion slot (P.9) 3 (P.9) 4 & (P.9) 5 # / * (P.9) 6 REC/PAUSE (P.13) Display 1 Input indicator (P.13) 2 TOTAL indicator (P.10) 3 DISC/TRACK indicator (P.10) 4 REMAIN indicator (P.
4 Remote contr ol 1 DELETE/CANCEL (P.21) 2 TITLE (P.21) 3 CHAR (P.21) 4 NUMBER (P.21) 5 Numbers [Characters] (P.9/P.21) 6 # (P.9/P.14) 7 ! (P.9/P.21) 8 $ (P.9/P.21) 9 REC/PAUSE (P.13) 0 M-MARK (P.14) q REC MODE (P.15) w RANDOM (P.11) e PROGRAM (P.12) r POWER (P.
5 English Remote contr ol Battery installation 1 Remove the battery compartment cover. 2 Insert batteries into the battery compartment. 3 Replace the battery compartment cover. Battery replacement If you find that the remote control must be used closer to the main unit than usual, the batteries are weak.
6 System connections Never plug the AC power cord to the wall outlet until all connections are completed. • Connections should be made to the correct input/output jacks on the other component. • Also refer to the owner ’ s manual supplied with the components you are connecting.
7 English ANALOG DIGITAL OPTICAL SYSTEM CONNECTOR IN L D OUT 1 IN 2 OUT R C FM ANT 75 Ω UNBAL. IN IN IN IN OUT OUT 6 Ω MIN./SPEAKER SPEAKERS SUBWOOFER OUT SYSTEM CONNECTOR GND AM ANT TAPE CD AUX M.
8 DIGITAL OUT OPTICAL DIGITAL IN DIGITAL OUT OPTICAL OPTICAL ANALOG DIGITAL OPTICAL SYSTEM CONNECTOR IN L D OUT 1 IN 2 OUT R C Connecting your audio system Digital connections GETTING STARTED Notes fo.
9 English English STANDBY/ON NATURAL SOUND MINIDISC RECORDER MDX-E300 + – INPUT ANALOG REC LEVEL DIGITAL MIN MAX REC/PAUSE 1 Insert an MD. 2 Press # / * ( # on the remote control) to start playback. 3 Adjust the volume using the volume control on the amplifier (or receiver).
10 Switching the display Press DISPLAY during stop or playback to display other information, such as the remaining time and track titles. During stop Press DISPLAY repeatedly to display the following information.
11 English English Random play You can have the unit play all the tracks on a disc in random order. To start random playback Press RANDOM . The RANDOM indicator lights up and “ _ _ _ - - : - - ” appears in the display while the unit selects a track.
12 Pr ogram play This function lets you enjoy listening to your favorite tracks in any order you desire. 1 Press & to stop playback. 2 Press PROGRAM to light up the PROGRAM indicator. 3 Program the desired track by pressing the corresponding number buttons.
13 English English TITLE DELETE SET CANCEL ENTER EDIT CHAR NUMBER A B C D E F G H I J K L 12 34 56 78 90 +10 +100 A-B S/F DISPLAY POWER SCROLL M N O P Q R S T U V W X Y Z REC/ PAUSE SYNC / SPACE M-MAR.
14 7 Adjust the recording levels. (See “ Adjusting recording levels ” on this page.) • Before proceeding to the next step, be sure to reset the source to be recorded to the beginning. 8 Press # / * ( # on the remote control) to start recording. • The TOC indicator lights up.
15 English English Music synchr o r ecording The synchronized recording function lets you set this unit to start recording automatically when a sound signal is input. 1 Load the sound source into the source component. • If necessary, program, or select the track you want to start recording from before proceeding to the next step.
16 Monitor out When a disc is not loaded, you can use the monitor out function to monitor the sound of the input source. The monitor out function can also be used to set recording levels without loading a disc. 1 Press to remove the disc. 2 Press INPUT repeatedly to select the input connected to the sound source you want to monitor.
17 English English TITLE DELETE SET CANCEL ENTER EDIT CHAR NUMBER A B C D E F G H I J K L 12 34 56 78 90 +10 +100 A-B S/F DISPLAY POWER SCROLL M N O P Q R S T U V W X Y Z REC/ PAUSE SYNC / SPACE M-MARK REC MODE INPUT RANDOM PROGRAM REPEAT › & SET/ENTER EDITING One of the main advantages of MD is its editing capabilities.
18 Erase EDITING Erase The ability to erase sound without having to re-record is a convenient function of MD. You can erase the entire disc, a single track, or just part of a track. Disc erase This operation lets you erase all audio and title (character) data to create a blank MD.
19 English English EDITING Disc or track title erase This operation lets you erase the title of the disc or the title of tracks on a disc. The title of the disc can only be erased during the stop mode, however, the title of the track can be erased during play or stop mode.
20 EDITING Divide This function lets you divide one track into two separate tracks by adding a new track number to a specified point in the track. Example: Dividing track 3 1 Play the track you want to divide. 2 Use ! or ⁄ to locate the point where you want to divide the track, then press * to pause at that position.
21 English English This function lets you title recorded MDs and the individual tracks. Titles may consist of uppercase and lowercase letters, numbers, and symbols for a maximum of up to 250 characters for each title. 1 To title a disc Press & to stop playback.
22 ADDITIONAL INFORMATION MD r ecor der system notes The recording system in your MD recorder is radically different from those used in cassette and DAT decks and is characterized by the limitations described below. Note, however, that these limitations are inherent to the MD recording system and are not a result of mechanical trouble.
23 English English ADDITIONAL INFORMATION Display messages Can’t copy Digital recording cannot be performed. (See “ SCMS - Serial Copy Management System ” on page 22.) Can’t edit! Edit operations are not possible. Can’t REC! Recording is not possible.
24 ADDITIONAL INFORMATION T r oubleshooting If your MD recorder fails to operate normally, check the following table. It lists common operating errors and simple measures which you can take to correct the problem.
25 English English ADDITIONAL INFORMATION Specifications Digital audio system System .................................................. MiniDisc digital audio system Laser .................................................................... Semiconductor laser Laser diode properties Material .
MDX-E300 O WNER’S MANU AL MODE D’EMPLOI BEDIENUNGSANLEITUNG BR UKSANVISNING MANU ALE DI ISTR UZIONI MANU AL DE INSTR UCCIONES GEBRUIKSAANWIJZING Minidisc Recorder Lecteur Enregistreur de Minidisc GB Y AMAHA ELECTRONICS CORPORA TION, USA 6660 ORANGETHORPE A VE.
デバイスYamaha MDX-E300の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Yamaha MDX-E300をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはYamaha MDX-E300の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Yamaha MDX-E300の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Yamaha MDX-E300で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Yamaha MDX-E300を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はYamaha MDX-E300の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Yamaha MDX-E300に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちYamaha MDX-E300デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
