YamahaメーカーPSR-282の使用説明書/サービス説明書
ページ先へ移動 of 92
.
2 PLEASE KEEP THIS MANU AL This product utilizes batteries or an e xternal power supply (adapter). DO NOT connect this product to an y pow er supply or adapter other than one described in the manual, on the name plate , or specifically recommended b y Y amaha.
3 PRECAUTIONS PLEASE READ CAREFULL Y BEFORE PROCEEDING * Please keep these precautions in a saf e place f or future reference. W ARNING Always follow the basic precautions listed below to avoid the possibility of serious injury or even death from electrical shock, short-circuiting, damages, fire or other hazards.
4 Congratulations on your purchase of the Y amaha PSR-282 P ortaT one! Y ou no w own a portable k eyboard that combines advanced functions, great sound and exceptional ease-of-use in a highly compact package. Its outstanding features also mak e it a remarkably expressive and versatile instrument.
5 Panel Controls and Terminals ........................ 6 Setting Up ......................................................... 8 • Power Requirements .......................................... 8 • Turning On the Power..............................
6 Panel Controls and T erminals q P ower s witch ([ST ANDBY/ON]) w [MASTER V OLUME] dial This determines the ov erall volume of the PSR-282. e [T OUCH] button This turns the T ouch function on and off. (See page 28.) Holding do wn this button allo ws you to adjust the T ouch Sensitivity setting.
Panel Controls and T erminals 7 !4 [SYNC ST OP] button This turns the Sync Stop function on and of f. (See page 39.) !5 [SYNC ST ART] / [ P A USE] button This turns the Sync Start function on and of f. (See page 36.) In the Song mode, it is used to temporarily pause song playback.
8 Setting Up This section contains information about setting up y our PSR-282 for pla ying. Make sure to read this section carefully bef ore using the instrument. Power Requirements Although the PSR-282 will run either from an optional A C adaptor or batteries, Y amaha recommends use of an A C adaptor whenev er possible.
Setting Up 9 Accessory Jacks ■ Using Headphones • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • For pri vate practicing and playing without disturbing others, connect a set of ste- reo headphones to the rear panel PHONES/OUTPUT jack.
10 No. Voice Name PIANO 001 Grand Piano 002 Bright Piano 003 Honky-tonk Piano 004 MIDI Grand Piano 005 CP 80 006 Harpsichord E.PIANO 007 Funky Electric Piano 008 DX Electric Piano 009 Hyper Electric P.
Step 1 V oices 11 q Press the [V OICE] b utton. GrandPno 000 Selecting and Playing Other V oices The PSR-282 has a huge total of 256 dynamic and realistic instrument voices. Let’ s try a few of them out no w ... w Select a v oice . e Play the ke yboard.
12 Quick Guide Step 2 Songs GrandPno 000 x q zx z x c r w Playing the Songs The PSR-282 is packed with a total of 105 songs, including fiv e User songs to which you can record your own performances, plus 100 songs that not only sho wcase the high-quality sound of the PSR-282 b ut can also be used with the educational Lesson feature.
Step 2 Songs 13 Recording Y our Own Song Much like a multi-track tape recorder , the PSR-282 lets you play and record the individual parts of your o wn song in real time. q Select the desired User song (101 - 105) f or recording. w Simultaneously hold down the [RECORD] button and press the desired track number button ([1] - [5]).
14 Quick Guide GrandPno 000 x z c v m n zb z Press the [STYLE] b utton. This calls up the Style mode. 8BtPop1 001 Using the Auto Accompaniment The po werful yet easy-to-use Auto Accompaniment features gi ve you pro- fessional instrumental backing for your performances.
Step 3 Auto Accompaniment 15 Looking up Chords in the Dictionary The con venient Dictionary function teaches you ho w to play chords by showing you the indi vidual notes. In the example belo w , we’ll learn ho w to play a GM7 chord... K eys for entering the chord type (C3 — B4) K eys for entering the chord root (C5 — B5) z Press the [Dict.
16 Quick Guide GrandPno 000 x x z z v z Select one of the Lesson songs. For instructions on selecting songs, see page 50. x Select the part you wish to w ork on (left or right) and the Lesson step. If you want to work on the right-hand part, press the [R] button; to w ork on the left, press the [L] button.
Step 4 Lesson 17 Grade The PSR-282 has a built-in e valuation function that moni- tors your practicing and — like a real teacher — tells you ho w well you did each exercise. F our grades are assigned, depending on your performance: “OK, ” “Good, ” “V ery Good, ” and “Excellent.
18 Panel Display Indications The PSR-282 features a lar g e multi-function displa y that shows all important settings for the instrument. The section below briefly explains the v arious icons and indications in the displa y .
Panel Display Indications 19 u Chord When a song (with chords) is being played back, this indicates the current chord root and type. It also indi- cates chords played in the A CMP section of the ke y- board when the Style mode and auto accompaniment are on.
20 Portable Grand This con venient function lets you instantl y call up the Grand Piano voice. Playing the Portable Grand Press the [Piano] button. Doing this automatically cancels any other mode or function, and resets the entire instrument for playing the special “Stereo Sampled Piano” Grand Piano voice.
Portable Grand 21 3 T urn on the Metronome. Press the [METR ONOME] button. T o turn the Metronome of f, press the [METR ONOME] button again. Indicates the beat number in the measure. Setting the Metronome Time Signature The time signature of the Metronome can be set to v ar- ious quarter-note based meters.
22 DJ This exciting f eature lets y ou instantly call up a d ynamic DJ v oice and style f or pla ying contem- porary dance music. Playing the DJ 1 Press the [DJ] button. Doing this automatically resets the entire instrument for playing the spe- cially programmed DJ song and voice.
23 Playing V oices The PSR-282 features a total of 256 authentic v oices — all of which have been created with Y amaha’ s sophisticated A WM (Ad vanced W ave Memory) tone generation system. These include 128 General MIDI v oices, plus special Split v oices, DJ v oices and drum kits.
Playing V oices 24 There are two ways to select v oices: 1) directly entering the voice number with the numeric ke ypad, or 2) using the [+]/[-] buttons to step up and do wn through the voice numbers. ■ Using the numeric ke ypad Enter the digits of the voice number as indicated on the panel.
Playing V oices 25 One T ouch Setting This special “voice” is actually a con venient feature which automatically selects a suitable voice for you when you select a style. The v oice is selected to best match the style or song you’ ve called up. 1 Select v oice #000 (One T ouch Setting).
Playing V oices 26 T ranspose and T uning Y ou can also adjust the tuning and change the transposition (key) of the entire PSR-282 sound with the T ranspose and T uning functions.
Playing V oices 27 ■ T uning • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • T uning determines the fine pitch setting of both the main v oice and the bass/chord accompaniment of the selected style.
Playing V oices 28 T ouch and T ouch Sensitivity The T ouch function giv es you dynamic, e xpressi v e control o ver the v oices, letting you determine ho w loud or soft the sound is by your playing strength. T urn the T ouch function on or off as desired by pr essing the [TOUCH] but- ton.
29 Effects The PSR-282 is equipped with a wide variety of eff ects that can be used to enhance the sound of the v oices. The PSR-282 has three separate effect systems — Reverb, DSP , and Harmon y — and each has man y different effect types to choose fr om.
Effects 30 DSP The DSP ef fect section provides distortion and chorus effects, plus a wealth of other useful and dynamic ef fects for enhancing and changing the sound of the voices. Included among these miscellaneous ef fects are re verse gate re verb, phaser , rotary speaker , tremolo, echo, delay , distortion, equalization, and wah.
Effects 31 Harmony The Harmony section features a v ariety of performance effects that enhance the melodies you play when using the accompaniment styles of the PSR-282. A total of twenty-six Harmony types are a vailable. T remolo, T rill and Echo effects can be used e ven if accompaniment is of f.
Effects 32 ■ Effect T ypes ● Reverb T ypes ● DSP T ypes No. Reverb Type Display Name Description 1 Hall 1 Hall1 Concert hall reverb. 2 Hall 2 Hall1 3 Room 1 Room1 Small room reverb. 4 Room 2 Room2 5 Stage 1 Stage1 Reverb for solo instruments. 6 Stage 2 Stage2 7 Plate 1 Plate1 Simulated steel plate reverb.
Effects 33 ● Harmony T ypes No. Harmony Type Display Name Description 1 Duet Duet Harmony types 1 - 5 are pitch-based and add one-, two- or three- note harmonies to the single-note melody played in the right hand. These types only sound when chords are played in the auto accom- paniment section of the keyboard.
34 Auto Accompaniment The PSR-282 pro vides dynamic rh ythm/accompaniment patterns — as well as voice settings appropriate f or each pattern — f or various popular m usic styles. A total of 100 dif ferent styles are av ailable, in several dif ferent categories.
Auto Accompaniment 35 Playing the Accompaniment The panel buttons belo w function as accompaniment controls. 1 T urn on the auto accompaniment. Press the [A CMP ON/OFF] button to turn on (enable) the auto accompani- ment.
Auto Accompaniment 36 Y ou can select the Main A or B section by pressing the appropriate b utton — [MAIN A/B] — before pressing the [ST AR T/ST OP] button. (The display briefly sho ws the letter of the selected section: “MAIN A” or “MAIN B.
Auto Accompaniment 37 2) Press the [INTR O/ENDING] button. T o actually start the Intro section and accompaniment, press the [ST AR T/STOP] b utton. Using Sync Start with an Intro section Y ou can also use the Sync Start function with the special Intro section of the selected style.
Auto Accompaniment 38 3 Change chords using the auto accompaniment f eature . T ry playing a few successi ve chords with your left hand, and notice ho w the bass and chord accompaniment change with each chord you play . (Refer to page 42 for more information on ho w to use auto accompaniment.
Auto Accompaniment 39 Sync Stop This con venient feature lets you stop (or pause) the auto accompaniment by releasing your fingers from the auto accompaniment section of the ke yboard.
Auto Accompaniment 40 Changing the T empo The tempo of style playback can be adjusted ov er a range of 32 - 280 bpm (beats per minute). 1 Call up the T empo setting. Press the [TEMPO/T AP] button. 2 Change the value. Use the numeric ke ypad to set the desired T empo value, or use the [+]/[-] buttons to increase or decrease the v alue.
Auto Accompaniment 41 Adjusting the Accompaniment V olume The playback volume of the accompaniment can be adjusted. This volume con- trol af fects only the accompaniment volume. The v olume range is 000 - 127. 1 Select the Accompaniment V olume function.
Auto Accompaniment 42 Using Auto Accompaniment — Multi Fingering When it is set to on (page 35), the auto accompaniment function automatically generates bass and chord accompaniment for you to play along with, by using Multi Fingering operation.
Auto Accompaniment 43 Chord Name/[Abbreviation] Normal Voicing Chord (C) Display Major [M] 1 - 3 - 5 C C Add ninth [(9)] 1 - 2 - 3 - 5 C(9) C(9) Sixth [6] 1 - (3) - 5 - 6 C6 C6 Sixth ninth [6(9)] 1 - .
Auto Accompaniment 44 Setting the Split Point The Split Point determines the highest ke y for the auto accompaniment section. The accompaniment can be played with the ke ys up to and including the Accom- paniment Split Point ke y . 1 Select the Split P oint control.
Auto Accompaniment 45 Dictionary The Dictionary function is essentially a built-in “chord book” that sho ws you the indi vidual notes of chords. It is ideal when you kno w the name of a certain chord and want to quickly learn ho w to play it. 1 Press the [Dict.
Auto Accompaniment 46 4 Play the c hord. Play the chord (as indicated in the display) in the auto accompaniment sec- tion of the ke yboard. The chord name flashes in the display (and a “congrat- ualtions” melody is played) when the correct notes are held do wn.
Auto Accompaniment 47 Beautiful sounding harmonies can be built in this manner . The use of interv als and chords is one of the most important elements in music. A wide v ariety of emotions and feelings can be created depending on the types of chords used and the order in which they are arranged.
48 Registration Memory Registration Memory is a flexible and con venient function that lets y ou instantly reconfigure virtually all settings of the PSR-282 with the touch of a single b utton. Simply sa ve your fa v orite custom panel settings to one of the Registration Memory presets (up to sixteen are av ailable) for future recall.
Registration Memory 49 Recalling a Registration Memory Preset 1 Select the appropriate Registration Memory bank. 2 Press the desired Registration Memory preset button ([1] or [2]).
50 Selecting and Playing Songs The PSR-282 features a total of 105 songs. These include 100 songs that sho wcase the rich and dynamic sounds of the instrument, and all 100 of these songs can be used with the educa- tional Lesson feature (page 60), a po werful tool that makes learning songs fun and easy .
Selecting and Playing Songs 51 3 Start the selected song. Press the [ST AR T/STOP] b utton. As the song plays back, the measure num- ber and chords are sho wn in the display . 4 Stop the song. Press the [ST AR T/STOP] b utton. If playback was started by pressing the [ST AR T/STOP] b utton, the selected song stops automatically .
Selecting and Playing Songs 52 3 P ause or stop playbac k as needed. Use the [P A USE] button or [ST AR T/STOP] button. Stopping playback does not cancel the set A/B points or the A-B Repeat function. 4 T urn off the A-B Repeat function. Press the [A-B REPEA T] button.
Selecting and Playing Songs 53 3 Press and hold down the [V OICE] button f or at least one second. “MELOD Y V OICE CHANGE” appears in the display , indicating that the selected panel voice has replaced the song’ s original melody voice.
Selecting and Playing Songs 54 Adjusting the Song V olume The playback volume of the song can be adjusted. This volume control af fects only the song volume. The volume range is 000 - 127. 1 Select the Song V olume function. Press the right Overall b utton, repeatedly if necessary , until “SONG V OL” appears in the display .
55 Song Recording The PSR-282 features po werful and easy-to-use song recording features that let y ou record y our keyboard perf ormances — using up to six independent tracks (inc luding one track for accompaniment) — for creating y our own complete, fully or chestrated compositions.
Song Recording 56 2 Select a User song for recor ding. Use the numeric ke ypad to select the desired song: 101 - 105. If no song is manually selected, the PSR-282 automatically selects the first av ailable empty song number . 3 Select a track n umber for recor ding.
Song Recording 57 ■ Recording to a Melod y T rack (1 - 5) Fi ve independent Melody tracks are provided for recording your ke yboard performance. Normally , you’ll want to record these after you’ ve recorded the Chord track. Y ou can also record the Chord track and one of the Melody tracks simultaneously .
Song Recording 58 Song Clear The Song Clear operation completely erases all recorded data on all tracks of a selected User song. Use this operation only when you’ re sure you want to erase a song and record a ne w one. T o erase an individual track of a song while lea ving the other tracks intact, use the T rack Clear operation (page 59).
Song Recording 59 T rack Clear The T rack Clear operation completely erases all recorded data on a selected track of a selected User song, leaving the other tracks intact. Use this operation only when you’ re sure you want to erase a track and record a ne w one.
60 Song Lesson The Lesson feature pr ovides an exceptionall y fun and easy-to-use way to learn ho w to read music and pla y the keyboar d. There are a total of 100 Lesson songs (Songs 001 to 100), spe- cially designed f or use with the educational features.
Song Lesson 61 2 Select the part you wish to w ork on (left or right) and the Lesson step. If you want to work on the right-hand part, press the [R] b utton; to work on the left, press the [L] button.
Song Lesson 62 Lesson 1 — T iming This lesson step lets you practice just the timing of the notes — any note can be used, as long as you play in rhythm. Pick a note to play . For the left hand, use a note in the auto accompaniment section or play the appropriate left-hand note; for the right, play a note abov e F # 2.
Song Lesson 63 Lesson 2 — W aiting In this lesson step, the PSR-282 waits for you to play the correct notes before con- tinuing playback of the song. This lets you practice reading the music at your o wn pace. The notes to be played are shown in the display , one after another, as you play them correctly .
Song Lesson 64 3 Play the appr opriate par t with the song. After the lead-in, the song starts automatically , and the appropriate notes appear in the display .
Song Lesson 65 Grade The Lesson feature has a built-in e v aluation function that monitors your practicing of the Lesson songs, and just like a real teacher , it tells you ho w well you did each ex ercise. Four grades are assigned, depending on your performance: “OK, ” “Good, ” “V ery Good, ” and “Excellent.
66 T alking This feature “talks” to you thr ough the speakers, “announcing” the Grade comments as well as the titles of the Lesson steps and the names of certain functions. 1 Select the T alking function. Press the left Overall b utton, repeatedly if necessary , until “T ALKING” appears in the display .
67 MIDI Functions The PSR-282 is MIDI-compatible, featuring MIDI IN and MIDI OUT terminals and pr oviding a variety of MIDI-related contr ols. By using the MIDI functions you can e xpand your m usical possibilities. This section explains what MIDI is, and what it can do, as well as ho w y ou can use MIDI on y our PSR-282.
MIDI Functions 68 MIDI is an acronym that stands for Musical Instrument Digital Interf ace, which allo ws electronic musical instruments to communicate with each other, by send- ing and recei ving compatible Note, Control Change, Program Change and various other types of MIDI data, or messages.
MIDI Functions 69 Connecting to a Personal Computer By connecting your PSR-282’ s MIDI terminals to a personal computer , you can hav e access to a wide variety of music softw are. When using a MIDI interface de vice installed in the personal computer , connect the MIDI terminals of the personal computer and the PSR-282.
MIDI Functions 70 Controlling PSR-282 Playback from an External Device — External Clock This function allo ws you to “slave” the PSR-282 to a “master” MIDI de vice, so that playback of the PSR-282 is controlled from that de vice.
MIDI Functions 71 Using Bulk Dump Send to Save Data This operation lets you sav e important PSR-282 data and settings to another de vice, such as a sequencer , computer , or MIDI data filer . This operation sa ves all User song data and all settings for the Registration Memory presets.
MIDI Functions 72 4 Start the operation. Press the [ST AR T/STOP] b utton to start the Bulk Dump operation. The follo wing display is shown while the data is being sent.
MIDI Functions 73 The display returns to the currently selected voice. Using Initial Setup Send with a Sequencer The most common use for the Initial Setup Send function is in recording a song on a sequencer that is intended for playback with the PSR-282.
MIDI Functions 74 3 Select the Initial Setup Send operation. Press “2” on the numeric ke ypad or use the [+]/[-] buttons to select operation #2, Initial Setup Send. 4 Press the [ST ART/ST OP] b utton. Start the Initial Setup Send operation. 5 Start recording on the sequencer , then send the Initial Setup data.
75 T roubleshooting Problem Possible Cause and Solution When the PSR-282 is turned on or off, a popping sound is temporarily produced. This is normal and indicates that the PSR-282 is receiving electrical power. When using a mobile phone, noise is produced.
76 Data Backup & Initialization ■ Data Backup • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • Except for the data listed belo w , all PSR-282 panel settings are reset to their initial settings whene v er the po wer is turned on.
77 V oice List ■ Maximum P olyphony • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • The PSR-282 has 32-note maximum polyphony . This means that it can play a maximum of up to 32 notes at once, regardless of what functions are used.
V oice List 78 ● GM V oice List 079 0 112 79 Ocarina SYNTH LEAD 080 0 112 80 Square Lead 081 0 112 81 Sawtooth Lead 082 0 112 85 Voice Lead 083 0 112 98 Crystal 084 0 112 100 Brightness 085 0 115 81.
V oice List 79 180 0 0 51 Synth Strings 2 181 0 0 52 Choir Aahs 182 0 0 53 Voice Oohs 183 0 0 54 Synth Voice 184 0 0 55 Orchestra Hit BRASS 185 0 0 56 Trumpet 186 0 0 57 Trombone 187 0 0 58 Tuba 188 0.
V oice List 80 ● DJ V oice List No.1 DJ_Kit Note # Key # MIDI Category Name Voice Name Bank Select Prg # MSB LSB 036 – 047 C1 – B1 0 123 118 Drum Loop Drum Loop 048 – 059 C2 – B2 0 123 118 S.
81 Style List Serial No. Style Name 8BEAT 001 8Beat Pop 1 002 8Beat Pop 2 003 8Beat Uptempo 004 8Beat Standard 005 Folkrock 006 Pop Rock 007 8Beat Medium 16BEAT 008 16Beat Shuffle 1 009 16Beat Shuffle.
82 Drum Kit List • “ ” indicates that the drum sound is the same as “Standard Kit 1”. • “ ” indicates that in the column on the immediate left. • Each percussion voice uses one note. • The MIDI Note # and Note are actually one octave lo wer than listed.
Drum Kit List 83 Voice# 119 126 127 128 Bank MSB# 127 127 127 127 Bank LSB# 0 0 0 0 Program Change# 0 32 40 48 Keyboard MIDI Key off Alternate assign Standard Kit 1 Jazz Kit Brush Kit Symphony Kit Not.
84 MIDI Implementation Chart YAMAHA [ Portable Keyboard ] Date: 26-JAN-2000 Model PSR-282 MIDI Implementation Chart Version : 1.0 Transmitted Recognized Remarks Function.
MIDI Implementation Chart 85 NO TE: *1 By def ault (factory settings) the PSR-282 ordinarily functions as a 16- channel multi-timbral tone generator , and incoming data does not aff ect the panel voices or panel settings . Ho wev er, the MIDI messages listed below do aff ect the panel voices, auto accompaniment, and songs.
MIDI Implementation Chart 86 ■ Effect map * If the received value does not contain an effect type in the TYPE LSB, the LSB will be directed to TYPE 0. * The numbers in parentheses in front of the Effect Type names correspond to the number indicated in the display.
87 Specifications Ke yboards • 61 standard-size keys (C1 - C6), with Touch Response and Dynamic Filter. Display • Large multi-function LCD display (backlit) Setup • STANDBY/ON • MASTER VOLUME.
88 Misc. +/- buttons ........................................ 24 A A C adaptor ......................................... 8 accessory jacks .................................. 9 accompaniment sections .................. 40 Accompaniment Split Point ....
L imited W arr anty 90 D A YS LABOR 1 YEAR P AR TS Y amaha Corporation of America, hereafter referred to as Y amaha, warrants to the original consumer of a product included in the categories listed below , that the product will be free of defects in materials and/or workmanship for the periods indicated.
HEAD OFFICE Y amaha Corporation, Electronic Musical Instrument Division Nakazawa-cho 10-1, Hamamatsu, Japan 430-8650 T el: 053-460-3273 Y amaha PK CLUB (P or tab le Ke yboard Home Page) http://www .yamaha.co.jp/english/pr oduct/pk/ For details of products, please contact your nearest Y amaha or the authorized distributor listed belo w .
M.D.G., EMI Division, Yamaha Corporation © 2000 Yamaha Corporation V549990 00?PO???.?-01A0 Printed in China.
M.D.G., EMI Division, Yamaha Corporation © 2000 Yamaha Corporation V524150 00?PO???.?-01A0 Printed in China.
デバイスYamaha PSR-282の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Yamaha PSR-282をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはYamaha PSR-282の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Yamaha PSR-282の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Yamaha PSR-282で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Yamaha PSR-282を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はYamaha PSR-282の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Yamaha PSR-282に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちYamaha PSR-282デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
