YamakawaメーカーDVD-MP12iの使用説明書/サービス説明書
ページ先へ移動 of 29
MOBILE DVD PLA YER DVD-MP12i User manual Ver . 1.0.
FEATURES Operating voltage : 12V D Low p C ower consumption design. VIDEO OUTPUT SYSTEM System MULTI , NTSC or P AL switchable. Multi Play position memory, R Multi-angle, multi-view, multi-audio funct.
TABLE OF CONTENTS Safety precautions Precautions Identification of controls When using remote control Connections Loading and unloading a disc Tu rning the power on and off Adju sting the volume Playi.
This digital versatile disc (DVD) video player uses 12V DC. For future reference, record the model and serial number (located on the case of the DVD player) in the space provided.
2 Precautions Warning Caution This symbol means important instructions. Failure to heed them can result in serious injury or death. This symbol means important instructions. Failure to heed them can result in injury or property damage. Do not disassemble or alter this unit.
3 Precautions Be sure the temperature inside the vehicle is between +55 ° C(+131 ° F) and -5 ° C(+23 ° F) before turning your unit on. Temperature You may notice the CD playback sound wavering due to condensation. If this happens remove the disc from the player and wait an hour for the moisture to evaporate.
4 Front panel See the page in for the details. Identification of controls POWER button/ indicator SKIP button/indicator STOP button/indicator PLAY/PAUSE button/indicator EJECT button/indicator Disc sl.
EJECT Identification of controls Remote Control 3 To locate previous chapter or track To change the playback speed To locate next chapter or track In menu mode, the button(s) of these four are used to select your desired item.
6 When using remote control Preparing the remote control Notes on battery Notes on the remote control Do not expose the remote sensor of the DVD player and the remote control to a strong light source such as direct sunlight or other illumination. If you do so, you may not be able to operate the DVD player via the remote control.
Connections 7 Used to detect the On/Off status of the parking brake. This lead must be connected to the power supply side of the parking brake switch. Green: Black: (-) neg. ground input. To vehicle chassis Brown: (+) pos. reverse wire input (for rear view camera option) Blue: (+) 300mA max.
1 Refer to the owner's manual for the connected monitor as well. "" 2 Refer to the owner's manual of the connected equipment for additional information. 3 When you connect the DVD player to other equipment, be sure to turn off the power .
EJECT EJECT Loading and unloading a disc Tur n on the power before loading and unloading discs. Insert the disc with the side containing words diagrams facing upwards. Once the disc is partially inserted, it is drawn in automatically. Playba ck starts.
T urning the power on and off Even if you turn power off or switch the ignition Key to OFF during playback or change the video source, playback will continue from the point where playback stopped when the power is turned ON again. The play position memory is released if the disc is removed or the Reset switch is pressed.
Playing a disc Playing a disc Caution With some DVDs, certain operations are disabled. Such operations are not possible on such DVDs. The DVD functions described in this manual are not supported by all instructions for details on the features supported.
Stopping playback DVD VCD MP3 CD Press the stop button during playback to stop playback. Press during playback. Tips Using the PRE-STOP function(DVD only . ) When the PRE-STOP func tion is used, the position at which playback is stopped is stored in the memory, a nd playback resumes from that position.
DVD VCD CD 1 Playing from the desired location Locating a specific location by entering the track number, the chapter number or the time. During playback, press GOTO.
1 Chapter/track/title repeat playback During playback , Press REPEAT The repeat mode switches each time the button is pressed. REPEAT REPEAT REPEAT REPEAT REPEAT REPEAT VCD(PBC OFF) CHAPTER REPEAT ON .
DVD 2 Switching the angle With DVDs on which images photographed from multiple angles are recorded, the angle can be switched during playback. During playback, press ANGLE. The angle switches between the angles recorded on the disc each time the button is pressed.
DVD 1 Displaying the disc status Use the procedure described below to display the status(title number, chapter number, etc.) of the currently playing DVD on the screen. During playback, press DISPLAY . The playback status switches each time the button is pressed.
1 Adjusting the sound setting The sound settings can be changed to suit your personal preferences and usage. DVD VCD MP3 CD To select the audio functions as you like: To Balance Bass Treble Loudness P.
EJECT EJECT 1 Changing the default settings(setup) DVD VCD MP3 CD Press SETUP during stop. The setting menu appears. Press joystick button to move the cursor to the item, then press ENTER to select the item you want.
EJECT EJECT DOWNMIX LT/RT STEREO SPEAKER SETUP DOWNMIX LOUD SPEAKERS SETUP LT/RT SET LT/RT DOWNMIX STEREO SET STEREO DOWNMIX AUDIO SETUP AUDIO OUT OP MODE ANALOG SPDIF/RAW SPDIF/PCM DUAL MONO DYNAMIC .
EJECT EJECT OP MODE OPERATIONAL MODE SETUP LINE OUT LINE OUT MODE SETUP MENU MAIN PAGE GENERAL SETUP SPEAKER SETUP AUDIO SETUP PREFERENCES EXIT SETUP TV WITH NO A V INPUT RF REMOD DUAL MONO DUAL MONO(.
EJECT EJECT PREFERENCES SETUP MENU MAIN PAGE GENERAL SETUP SPEAKER SETUP AUDIO SETUP PREFERENCES EXIT SETUP TV TYPE MULTI MULTISYNC TV NTSC NTSC TV PAL PAL TV SET TV STANDARD LOCALE GRB UNITED KINGDOM.
EJECT EJECT SETUP MENU MAIN PAGE GENERAL SETUP SPEAKER SETUP AUDIO SETUP PREFERENCES EXIT SETUP SMART NAV WITH MENU PLAYING MP3 WITH MENU SMART NAV TYPE LOGO MPG LOGO JPG LOGO OPEN SCREEN LOGO PARENT .
1 MP3 instruction MP3 Insert the MP3 disc then playback starts, the MENU of elapsed track appears. MP3 J&Z 1 MP3 xxx 2 MP3 xxx 3 Mp3 xxx 4 MP3 xxx 5 SMART NAV 1 PLAY MODE REP-ONE PLAY MODE PRESS 9.
In case of difficulty 24 Others If operation freezes, the screen goes black or the unit should otherwise not function properly, try turning the power off then back on. Alternatively , try the following methods in the order listed until the unit returns to normal playback mode.
25 Power requirement: Power consumption: less than 20W 12 V DC , 1.5A Dimensions(approx.): 178x50x183mm incl. Projecting parts Weight: 1.4Kg (w/h/d) Design and specifications are subject to change without notice. Power General Specifications Audio output : 2V 1 0 0 k ¡À0.
26 Accessories and Hardware Remote control x 1 Lithium Button Cell (3V) x 1 IR sensor x1 + 3 V 1 2 3 4 5 6 7 8 9 E N T E R T ITLE M E N U S E TU P + V O L _ M UT E S U B A U D IO G O T O C L E A R P O.
デバイスYamakawa DVD-MP12iの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Yamakawa DVD-MP12iをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはYamakawa DVD-MP12iの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Yamakawa DVD-MP12iの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Yamakawa DVD-MP12iで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Yamakawa DVD-MP12iを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はYamakawa DVD-MP12iの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Yamakawa DVD-MP12iに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちYamakawa DVD-MP12iデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
