BillionメーカーBIPAC 2073の使用説明書/サービス説明書
ページ先へ移動 of 48
User Manual Last revised Apr 2009 BiP AC 2073 HomePlug A V 200 Ethernet Adapter BiP AC 2074 HomePlug A V 200 Ethernet Bridge with AC Pass-Through.
Safety W arnings Do not use the adapter in high humidity or high temperature environment. 1. Do not open or repair the case yourself. 2. Avoid using this product and all its accesories outdoor . 3. Place the adapter on a stable surface. 4. Only “HomePlug A V” compliant Powerline Communication (PLC) adapter for remote access is 5.
T able of Contents Chapter 1: Product ............................................................................ 1 Introduction ................................................................................. 1 Specications .....................
Diagnostic T ab .................................................................................. 33 QoS T ab ............................................................................................ 35 Firmware Download T ab .....................
Chapter 1: Product Introduction BiP AC HomePlug A V 200 is a networking device that utilizes the existing wiring system as a path to transmit data signal through the inter-conversion between digital and analog signal.
Specications Protocol TDMA, CSMA/CA Standard Ethernet specication: IEEE 802.3, IEEE 802.3x, IEEE 802.3u, Auto MDI/MDIX T ransmission Speed 200Mbps Optimal Coverage Range 300M Modulation Supports.
Features Physical layer data rate up to 200Mbps over existing Powerline. 1. Uses powerline technology that takes advantage of the unused bandwidth of the electrical 2. wiring in the home. Ideal for T riple Play applications such as IPTV , V oIP telephony and high-speed Internet 3.
4 Chapter 2: Installing the Router Package Contents BiP AC 2073 BiPAC 2073 HomePlug AV 200 Ethernet Adapter • Quick Start Guide • CD (containing user manual and QSG) • Ethernet (CAT-5 LAN) cable.
5.
6 Device Overview The Description of each labeled part is described in the table below . AC Outlet / AC Pass- thru (only available in BiP AC 2074) Filtered AC Pass-through available for electrical devices with Input: 100~240V AC, 50~60Hz, 6Amp (Maximum).
The Rear Side and Look After Installing with Clip (BiP AC 2073) 7 Clip Socket: Install the clip into this socket.
8 Hardware Installation Refer to the following diagrams and direction to install the clip with BiP AC 2073: Example 1: EU clip. Please check the lock instruction on your clip.
9 Example 2: UK clip. Please check the lock instruction on your clip. • If you got the “Circle Lock”, refer to right diagram. •.
Connecting the HomePlug Adapter It is easy to connect the device simply by performing the following instructions: Power Connection BiP AC 2073 Plug the Homeplug A V 200 Ethernet Adapter into the wall outlet/socket. BiP AC 2074 Plug the embedded AC power cable to the wall outlet/socket.
11 LAN Connection Connect the supplied RJ-45 Ethernet cable to the Ethernet port on HomePlug A V 200 Ethernet bridge/adapter and the other side to the device’s Ethernet interface.
AC Pass-Through Connection BiPAC 2074 only T o plug IT electrical devices (e.g. ADSL router , Set-to-box, notebook..) into the built-in AC pass- through with an embedded low-pass lter to prevent electrical noise from interfering on your powering network.
Networking Setup Refer to the following steps: Connect a network cable to the adapter or bridge and then plug the device into a power 1. socket. Then connect the device to a PC, modem, router or set-top-box. 2. Create a secure network by a simply push off the network SYNC button.
Setup Utility After you complete the hardware installation, insert the CD-ROM to the CD-ROM drive to perform Setup Utility for network conguration. The Setup Utility will auto-run. Follow the step-by-step conguration wizard, the utility will guide you complete the basic network conguration.
15 Quick Start (Setup Powerline Network) Push Button usage Sync Button is used to add a HomePlug device to a Powerline network or enable it to join a network by pressing the Sync Button of the device to turn it into Broadcast state or Join state.
16 Press the Sync Button of device A for 1~3 seconds to turn it into Join State, you should nd 3. the Power LED blinks steadily signifying it is in Join state. W ait for the devices to boot again and when the PLC LEDs of both devices lit steadily , you 4.
Powerline Network Illustration 17.
18 Chapter 3: Installation Utility Installation Place the BiP AC HomePlug A V 200 Utility auto-installation CD into your CD-ROM/DVD-ROM 1. drive and click on Utility for Easy Installation. If you have not installe d Microsoft .NET Framework 2.0, click on Install Microsoft .
19 Microsoft .NET Framework 2.0 Installation After clicking on Install Microsoft .NET Framework 2.0, the Net Framework 2.0 installation 1. wizard will be displayed. Click Next to proceed with the installation. 2. Check the Agreement acceptance box then press Install to start the installation.
20.
21 BiP AC HomePlug A V 200 Utility Installation After clicking on Install the utility for Windows (32-bit / 64-bit), the installation wizard will ap- 1. pear . Click Next . 2. Y ou may dene the location of the installation folder using the Browser , however it is highly recommended that you use the default location.
22 3. Press Next to conrm and start the installation..
4. While the utility installlation is in progress, the system will automatically prompt you to install the WinPcap program in a separate window pop-up. Install this program in order for the utility to work well. 5. When the WinPcap installation window pops up, click Next to proceed with the installation.
6. Click on Next to proceed to the next step. 7. Read through the license agreement then click on I Agree button to accept the agreement term and to continue the installation.
8. When the WinPcap installation is done, click on Finish to close the window . 25.
9. When the WinPcap installation is done, you will have also completed the BiP AC HomePlug A V 200 Utility installation as well. Y ou may now click on the close button of the Utility installation window to nish the process.
27 Chapter 4: Conguration Accessing BiP AC HomePlug A V 200 Utility Once the BiP AC HomePlug A V 200 Utility Setup Wizard is installed, a shortcut will appear on the desktop.
28 BiP AC HomePlug A V Utility Billion BiP AC HomePlug A V Utility consists of 6 screens accessed through 6 panel tabs. The 6 panels are Main, Privacy , Diagnostics, QoS, Firmware Download and About located on the top left corner of the program for conguration convenience.
29 The Network type (Public or Private) is also displayed based on the network status of the local device. The scan status option is displayed on the top right corner above the Remote devices panel showing whether the Autoscan function is turned ON or OFF .
30 Password Setup Instructions: This feature grants users the access level to change the Private Network Name of both the local & the remote HomePlug devices.
If the password entered is not recognized or unacceptable, an error message box will pop up 3. prompting user to change the password. Click OK then re-enter the password again. If the password entered is correct, you will see that the password will be displayed next to 4.
32 Privacy T ab Privacy T ab allows user the convenience to manage the security of the private powerline network. In addition, user can also uitlize this feature to add a new HomePlug device to the private network instead of manually adding the device using its sync button.
33 Diagnostic T ab The Diagnostics T ab screen shows System information and a history of all remote devices seen over a period of time. This screen is available for OEM/ODM Customization.
34 The Lower panel contains a history of all remote devices seen on the computer over a certain period of time. All devices that were on the powerline network are listed here along with a few other parameters.
35 QoS T ab This function allows user the exibility to manage the bandwidth usage for each HomePlug device. The higher the QoS priority the more bandwidth usage is allocated to that particular device. T o set the QoS priority of each device: Click to select the device that you want to set its QoS priority .
Firmware Download T ab This function gives users the convenience to download the free bundled Firmware Upgrade tool from Billion website. Thus, with this feature, users can always keep their PLC Utility updated with the latest rmware.
About T ab The About screen shows the software version. Under the Preferences panel, user can check the AutoScan box to turn on the Auto Scan function or check off the box to turn of f the Auto Scan function.
38 Firmware Upgrade Firmware upgrade allows users to keep their HomePlug Utility application to the most updated feature. This rmware upgrade tool is designed to provide user the most user friendly application that makes rmware upgrade process easy and fast.
39 3. When the upgrade tool initiates, it will prompt you to install Framework 2.0 if you have not had one installed to your computer . 4. But if you already have Framework 2.0 in your computer . Y ou can directly click on the “YES, I Already Have the Framework 2.
40 7. When the rmware upgrade application starts, it will automatically scan for all available LAN cards on the computer and the HomePlug devices connected to it. 8. Once detected, a list of both local and remote HomePlug devices found within a powerline network will be displayed on the “Selected Device” drop down menu.
41 9. If there is no device detected, a warning will pop up to signify for possible disconnection of your device or its cable. Click OK and then reconnect your devices and its cables.
42 1 1. When the device has been selected, press the Firmware Upgrade button to start the upgrading process. 12. When upgrading is nished, the new rmware version will be displayed in the Current Firmware column.
43 Chapter 5: T roubleshooting If your router is not functioning properly , please refer to the suggested solutions provided in this chapter . If your problems persist or the suggested solutions do not meet your needs, please kindly contact your service provider or Billion for support.
Appendix: Product Support & Contact If you come across any problems please contact the dealer from where you purchased your product. Contact Billion Billion Product Registration Billion is committed to before and after sales customer services. Y ou will get the most out of your Billion’s products after registration.
デバイスBillion BIPAC 2073の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Billion BIPAC 2073をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBillion BIPAC 2073の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Billion BIPAC 2073の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Billion BIPAC 2073で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Billion BIPAC 2073を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBillion BIPAC 2073の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Billion BIPAC 2073に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBillion BIPAC 2073デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。