BillionメーカーBiPAC 7401VPの使用説明書/サービス説明書
ページ先へ移動 of 121
BiP AC 7401VP/VGP V oIP/(802.1 1g) ADSL2+ Router User Manual V ersion Release 5.07 Last Revision Date: 08-26-2008.
T T a a b b l l e e o o f f C C o o n n t t e e n n t t s s CHAPTER 1: INTRODUCTION ............................................................................................................. 3 I NTRODUCTION TO YOUR R OUTER .........................
T ime Zone ............................................................................................................................... ...... 53 Remote Access ........................................................................................
V oIP/(802.1 1g) ADSL2+ Router Chapter 1: Introduction Chapter 1: Introduction Introduction to your Router Welcome to the V oIP/(802.1 1g) ADSL2+ Router .
V oIP/(802.1 1g) ADSL2+ Router Chapter 1: Introduction Quick Inst allation Wizard It supports a WEB GUI p age to install this device quickly . With this wizard, end users can enter the information easily which they get from their ISP , then surf the Internet immediately .
V oIP/(802.1 1g) ADSL2+ Router Chapter 1: Introduction Dynamic Host Configuration Protocol (DHCP) Client and Server In the W AN site, the DHCP client can get an IP address from the Internet Service Provider (ISP) automatically .
V oIP/(802.1 1g) ADSL2+ Router Chapter 2: Installing the router Chapter 2: Inst alling the Router Import ant note for using this router War n i n g Do not use this router in high humidity or high temperatures. Do not use the same power source for this router as other equipment.
V oIP/(802.1 1g) ADSL2+ Router Chapter 2: Installing the router The Front LEDs LED Meaning 1 PWR Lit when power is ON. 2 SYS Lit when the system is ready . 3 – 6 LAN Port 1X—4X (RJ-45 connector) Lit when connected to an Ethernet device. Green for 100Mbps; Orange for 10Mbps.
V oIP/(802.1 1g) ADSL2+ Router Chapter 2: Installing the router The Rear Port s 3 1 6 5 The Ethernet Port # 4 can be used as a console port. Y ou need a special console tool which already includes in the package to connect with LAN port 4 and PC’ s RS-232 port (9-pin serial port).
V oIP/(802.1 1g) ADSL2+ Router Chapter 2: Installing the router 9 7 ADSL Connect the supplied RJ-1 1 (“telephone”) cable to this port when connecting to the ADSL/telephone network. 8 Antenna (Wireless router only ) Connect the detachable antenna to this port.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation 10 Chapter 3: Basic Inst allation The router can be configured with your web browser . A web browser is included as a standard application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/XP/Me, etc.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation 11 Connecting your router 1. Connect this router to a LAN (Local Area Network) and the ADSL/telephone ( ADSL ) network. 2. Power on the device. 3. Make sure the PWR and SYS LEDs are lit steadily and that the LAN LED is lit.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation 12 Configuring PCs in Windows in Window XP 1. Go to St art / Control Panel (in Classic View). In the Control Panel, double-click Network Connections . 2. Double-click Local Area Connection .
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation 13 Configuring PCs in Windows 2000 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click Network and Dial-up Connections . 2. Double-click Local Area (“LAN”) Connection .
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation 14 Configuring PC in Windows 95/98/ME 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Compatible , or the name of any Network Interface Card (NIC) in your PC.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation 15 Configuring PC in Windows NT4.0 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties .
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation 16 Factory Default Settings Before configuring your , you need to k now the following default settings. Web Interface (Username and Password) Username: admin Password: admin The default username and password are “ admin ” and “ admin ” respectiv ely .
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation 17 Information from your ISP Before configuring this device, you have to check wi th your ISP (Internet Service Provider) to find out what kind of service is provided such as DHCP (Obt ain an I P Address Automatically , S tatic IP ( Fixed IP Address) and PPPoE.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation Configuring with your Web Browser Open your web browser , enter the IP address of your router , which by default is 192.168.1.254 , and click “ Go ”, a user name and password window prompt will appear .
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation Chapter 4: Configuration At the configuration homep age, the left navigation p ane where bookmarks are provided links you directly to the d.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation S t atus ARP T able This section displays the router’s ARP (Address Resolution Protocol) T able, which shows the mapping of Internet (IP) addresses to Ethernet (MAC) addresses.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation Routing T able V alid: It indicates a successful routing st atus. Destination: The IP address of the destination network. Netmask: The destination netmask address. Gateway/Interface: The IP address of the gateway or existing interface that this route will use.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation Expired T able Please refer the Leased T able . Pe r m a n e n t T a b l e Name: The name you assigned to the Permanent configuration. IP Address: The fixed IP address for the specify client.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation Event Log This page displays the router’s Event Log entries. Major events are logged to this window , such as when the router ’s ADSL c.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation NA T Sessions This section lists all curr ent NA T sessions betwe en inte rface of types external (W AN) and internal (LAN). Diagnostic It tests the connection to computer(s) which is co nnected to LAN ports and also the W AN Internet connection.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation UPnP Portmap The section lists all por t-mapping established using UPnP (Universal Plug and Play). Please see the Advanced section of this manual for more details on UPnP and the router ’s UPnP configuration options.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation Quick S t art For detailed instructions on configuring your WAN settings, please see th e WA N section of this manual.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation Select the desired option from the list and click Apply to return to the Quick S t art interface to continue configuring your ISP connection. Pl ease note that the contents of this list will vary , depending on what is supported by your ISP .
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation Configuration When you click this item, you get following sub-items to configure the ADSL router . LAN, W AN, System, Firewall, V oIP , QoS, Virtual Server , Time Schedule and Advanced These functions are described below in the following sections.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation Ethernet Primary IP Address IP Address: The default IP on this router . SubNetmask: The default subnet mask on this r outer . RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation Ethernet Client Filter The Ethernet Client Filter supports u p to 16 Ethernet network machines that helps you to manage your network control to accept traffic from specific authorized machines or can restrict unwanted machine(s) to access your LAN.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation Active PC in LAN displays a list of individual Ethernet device’s IP Address & MAC Address which connecting to the router . Y ou can easily by checking the box next to the IP address to be blocked or allowed.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation Wireless (Wireless Ro uter only ) Parameters WLAN Service: Default setting is set to Enable . If you do not have any wireless, both 802.1 1g and 802.1 1b, device in your network, select Disable.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation Note: Wirele ss performance may degrade if select ID c hannel is already being occupied by other AP(s). TX PowerLevel: It is function that enhances the wireless transmitting signal stren gth.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation Wireless Security (Wireless Router only) Y ou can disable or enable with WP A or WEP for protecting wireless network.The default mode o f wireless security is disabled . WP A Pre-Shared Ke y WP A Algorithms: There are two types of the WP A-PSK, WP A1 and WP A2.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation WEP WEP Authentication: There are three options to choose , Open System, Shared Key and Both. The default is set to Open System which does not re quest a shared key between the AP sender and the AP client, only supplying a correct SSID and an encryption key if th ere is any .
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation Wireless Client (MAC Address) Filter (Wireless Router only) The MAC Address support s up to 16 wireless network machines and helps you to manage your network control to accept traffic from specific authorized mach ines or to restrict unwanted machine(s) to access your LAN.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation Associate Wireless Client displays a list of in di vidual wireless device’s MAC Address that currently connects to the router . Y ou can easily by checking the box next to th e MAC address to be blocked or allowed.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation DHCP Server Y ou can disable or enable the DHCP (Dynamic Host Configuration Protocol) server or enable the router ’s DHCP relay functions.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration W AN (Wide Area Network) W AN refers to your Wide Area Ne twork connection, i. e. your router ’s connection to your ISP and the Internet. There are two items within the W AN section: ISP , DNS and ADSL .
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration RFC 1483 Routed Connections Description: Y our description of this connection. VPI and VCI: Enter the information provided by your ISP .
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration TCP MSS Clamp: This option help s to discover the optimal MTU size automatically . Default is enabled. MAC Address Spoofing: This option is requir ed by some service providers. Y ou must fill in the MAC address that specify by service provider w hen it is required.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration PPPoA Routed Connections Description: User-definable name for the connection. VPI/VCI: Enter the information provided by your ISP .
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Connect to Demand: If you want to establish a PPPoA sessi on only when there is a packet requesting access to the Internet (i.e. when a program on your computer attempts to access the Internet).
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration IPoA Routed Connections Description: User-definable name for the connection. VPI/VCI: Enter the information provided by your ISP .
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration PPPoE Connections Description: A user-definable name for this connection. VPI/VCI: Enter the information provided by your ISP .
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Connection: Always on: If you want the router to establish a PPPoE session when starting up and to automatically re-establish the PPPoE session when disconnected by the ISP .
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration PPPoE with Pass-through Connections PPPoE with pass-through adapt s the following method: PPPoE Routed mode + 1483 Bridge Mode. With pure PPPoE connection, the router can get one W AN ad dress to the router .
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration DHCP client function or click S pecify an IP address to disable the DHCP client function, and specify the IP address manually . T he setting of this item is specified by your ISP . Authentication Protocol: Default is Chap(Auto).
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration DNS A Domain Name System (DNS) contains a mapping t able for domain name and IP addresses. On the Internet, every host has a unique and user-friendly name (domain name) such as www .helloworld.com and an IP address.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration ADSL Connect Mode: This mode will automatically detect your ADSL line code, ADSL2+, ADSL2, G .dmt, G .lite, T1.413, AnnexM2 and AnnexM2+. But in some area, multimode cannot detect the ADSL line code well.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Downstream: Display current downstream rate of your ADSL line. Advanced Options ADSL Parameters help to interpret your ADSL line st atistics. SNR Margin: It is known as Signal to Noise Ration Margin.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration BIS+/BIS/GDMT : ADSL connect i on will be limited to ADSL2+, ADSL2 and ADS1 (G .DMT/G .Lite) only . DISABLE: This disable function will disconnect your ADSL synch. Select it with cautious.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration System There are six items within the System section: Time Zone, Remote Access, Firmware Upgrade, Backup/Restore, Rest art and User Managem ent.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Remote Access T o temporarily permit remote administration of the r outer (i.e. from outside your LAN), select a time period the router will permit remote access for and click Enable.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Firmware Upgrade Y our router ’s “firmware” is the sof tware that allows it to operate and provides all it s functionality . Think of your router as a dedicated computer , and the fir mware as the software it runs.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Backup / Restore These functions allow you to save and backup your router ’s current se ttings to a file on your PC, or to restore a previously saved backup. This is us eful if you wish to experiment with different settings, knowing that you have a backup handy in the case o f any mistakes.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Rest art Ro uter Click Rest art with option Current Settings to reboot your router (and restore your last saved configuration).
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration User Management In order to prevent unauthorized access to your router’s configuration interface, it r equires all users to login with a password. Y ou can set up multiple user accounts, each with their own password.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Firewall and Access Control Y our router includes a full SPI (S t at eful Packet Inspection) firewall for controlling Internet access from your LAN, as well as helping to prevent attacks from hackers.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Y ou can find six items under the Firewall section: General Settings, Packet Filter , Intrusion Det ectio n, URL Filter , IM/P2P Blocking and Firewall Log.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Packet Filter This function is only available when the Firewall is enabled and one of these four security levels is chosen (All blocked, High, Medium and Low). The predefined port filter rules in the Packet Filter must modify accordingly to the level of Firewall, which is selected.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Example: Predefined Port Filters Rules The predefined port filter rules for High, Medium and Low security levels are listed. See T able 1. Note: Firewall – All Blocked/User-defined, you must define and create the port filter rules yo urself.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration 63 MSN (7001) UDP(17) 7001 7001 YES YES N/A N/A N/A N/A MSN VEDIO (9000) TCP(6) 9000 9000 NO YES N/A N/A N/A N/A Inbound: Internet to LAN; Outbound: LAN to Internet.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Packet Filter – Add TCP/UDP Filter Rule Name: Users-define description to identify this entry or click to sel ect exi sting predefined rules. The maximum name length is 32 characters. Time Schedule: It is self-defined t ime period.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Packet Filter – Add Raw IP Filter Rule Name: Users-define description to identify this entry or click to sel ect exi sting predefined rules. Time Schedule: It is self-defined time period. Y ou may specify a time schedule for your prioritization policy .
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Example: Configuring your firewall to allow for a publicly accessible web server on your LAN The predefined port filter rule for HTTP (TCP port 80) is the same no matter whether the firewall is set to a high, medium or low security level.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Configuring Packet Filter: 1. Click Port Filters . Y ou will then be presented with the predefined port filter rules screen (in this case for the low security level), shown below: Note: Y ou may click Edit the predefined rule instea d of Dele te it.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration 5. The new port filter rule for HTTP is sh own below: 6. Configure your Virtual Server (“port forwarding”) settings so that incoming HTTP re.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Intrusion Detection The router ’s Intrusion Detection System (IDS) is used to detect hacker att acks and intrusion attempts from the Internet.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration T able 2: Hacker attack types recognized by the IDS Intrusion Name Detect Parameter Blacklist T ype of Block Duration Drop Packet Show Log Ascen.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration URL Filter URL (Uniform Resource Locator – e.g. an address in the form of http://www .abcde.com or http://www .example.com ) filter rules allow you to prevent users on your network from accessing particular websites by their URL.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration 2. If not, check if it is listed in the forbi dden list. If yes, then the connection attempt will be dropped. 3. If the packet does not match either of the above two items, it is sent to the remot e web server .
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration IM / P2P Blocking IM, short for Instant Message, is required to use client program software that allows users to communicate, in exchanging text message, with other IM users in real time over the Internet.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Firewall Log Firewall Log display log information of any unexpected action with your firewall settings. Check the Enable box to activate the logs. Log information can be seen in the S tatus – Event Log after enabling.
V oIP/(802.1 1g) ADSL2+ Router Chapter 3: Basic Installation V oIP (V oice over Internet Protocol) V oIP enables telephone calls through existing Internet connection instead of going through the PSTN (Public Switched T elephone Network).
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Wiza rd This section provides easy setup for your V oIP service. V oice QoS DSCP Marking : Differe ntiated Services Code Point (DSCP), it is the first 6 bit s in the T oS byte.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information General Settings This section reflect s and contains basic settings fo r the V oIP module from selected provider in the Wizard section. Fail to provide correct information will halt making calls ou t to the Internet.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Setting for Phone Port 1 Registrar Address(or Hostname): Indicate the SIP registrar IP address. Registrar Port: S pecify the port of the SIP registrar on which it will listen for register request s from V oIP device.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Click the Edit to add or remove the responses code. T o be sure the code is separat ed by a comma (,). For more information about SIP responses codes, plea se check to link to http://voip- info.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Phone Ports This section displays sta tus and allows you to edi t the account information of your Phones.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Codec Preference Codec is known as Coder-Decoder used for data si gnal conversion.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information PSTN Dial Plan This section enables you to configu re “V oIP wit h PSTN switching” on your system. Y ou can define a range of dial plans to make regular call from V oIP switching to PSTN line.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Attention Phone port will automatically rely to PSTN line when: - Power Down - Internet Service Fail , i.e., lost of W AN IP Address - SIP option is disabled. See V oIP General Setting section.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information 3) Dial at Timeout If you only dial 01223 7070 and no more numbers, af ter the timeout activates, 012237070 will be dialed to make a regular call via FXO port.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information V oIP Dial Plan This section help s you to make a telephony number dialed as makin g a regular call via V oIP . Y ou no longer need to memorize a long dial string of number for making a V oIP call.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Dial Plan Rules List Click Add to create and define V oIP dial-plan rule(s). Prefix Processing: Prepend xxx unconditionally: xxx number is appended unconditionally to the front of the dialing number when making a call.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Dial-Plan Examples: Description x . Any digit number between 0 and 9 in variable length. Maximum length is 16. xxx Any 3 digit number only between 0 and 9. T otal length is 3.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Ring Parameters Ring Cadence (in ms): Ring cadence is defined by three fields, Frequency: On T ime1, Off T ime1, On T ime2, Off T ime2 and On Time3, Of f Time3. Frequency is specified in Hertz.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Special Dial Codes The following table list s the special dial codes that are built-in to the system: Option Description Flash-hook (Wireless Router with LINE port only) Switch to PSTN line Note: A quick press of the hook.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information QoS (Quality of Service) QoS function helps you to control your network traf fic for each application from LAN (Ethernet and/or Wireless) to W AN (Internet).
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Destination Port : The destination port of p ackets to be monitored. Source IP Address Range : The sou rce IP addre ss or range of packet s to be monitored. Destination IP address Range : The destination IP address or range of p ackets to be monitored.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Outbound IP Throttling (LAN to W AN) IP Throttling allows you to limit the speed of IP traffic. The value entered will lim it the speed of the application that you set to the specified value’ s multiple of 32kbps.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Inbound IP Throttling (W AN to LAN) IP Throttling allows you to limit the speed of IP traffic. The value entered will lim it the speed of the application that you set to the specified value’ s multiple of 32kbps.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Example: QoS for your Network Connection Diagram Vo I P Normal PCs Restricted Information and Settings Upstream: 928 kbp s Downstream: 8 Mbps V oIP User : 192.16 8.1.1 Normal Users : 192.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Mission-critical application Mostly the VPN connection is mission-critical application for doing data ex change between head and branch office. The mission-critical application must be sent out smoothly without any dropping.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Sometime your customers or friends may upload their f iles to your FTP server and that will saturat e your downstream bandwidth. The settings below help you to limit bandwidth for the restricted application.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Virtual Server (known as Port Forwarding) In TCP/IP and UDP net works a port is a 16-bit number used to identify which application program (usually a server) incoming connections should be de livered to.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Add Virtual Server Because NA T can act as a “natural” Internet firewall, your router protect s your network from.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information application. List all existing PCs connecting to the network. Y ou may assign a PC with IP address and MAC from this list.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Edit DMZ Host The DMZ Host is a local computer exposed to the Internet.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Edit One-to-One NA T (Netw ork Address T ranslation) One-to-One NA T maps a specific private/local IP address to a global/public IP address.
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Time Schedule: A self-defined time period to enable your virtual server .
V oIP/(802.1 1g) ADSL2+ Router Appendix A: Product Support and Contact Information Example: List of some well-known and registered port numbers. The Internet Assigned Numbers Authority (IANA) is the central coordinator for the assignment of unique parameter values for Internet protocols.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Time Schedule The T ime Schedule supports up to 16 time slots which help s you to manage your Internet connection. In each time profile, you may schedule specific day(s) i.e. Monday through Sunday to restrict or allowing the usage of the Internet by users or applications.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Configuration of Time Schedule Edit a Time Slot 1. Choose any T ime Slot (ID 1 to ID 16) to edit, click Edit. Click Edit Note: W atch it carefully , the days you have selected will presen t in capit al letter .
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Advanced Configuration options within the Advanced section are for users who wish to t ake advantage of the more advanced features of the router . Users who do not underst and the features should not attempt to reconfigure their router , unless advised to do so by support st aff.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Dynamic DNS The Dynamic DNS function allows you to alias a dyna mic IP address to a st atic hostname, allowing users whose ISP does not assign them a static IP address to use a domain name.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Check Email This function allows you to have the router check your POP3 mailbox for new Email messages.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Device Management The Device Management advanced configuration settings al low you to control your router ’s security options and device monitoring features.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration For Example: User A changes HTTP port number to 100 , specifies their own IP address of 192.168.1.55 , and sets the logout time to be 100 seconds. The router will only allow User A access from the IP address 192.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration SNMP V e rsion: SNMPv2c and SNMPv3 SNMPv2c is the combination of the enhanced protocol features of SNMPv2 without the SNMPv2 security .
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration From RFC 1472 (PPP/Security MIB): PPP Security Group) From RFC 1473 (PPP/IP MIB): PPP IP Group From RFC 1474 (PPP/Bridge MIB): PPP B.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration IGMP IGMP , known as Internet Group Management Protocol , is used to management host s from multicast group. IGMP Forwarding: Accepting multicast p acket. Default is set to Enable. IGMP Snooping: Allowing switched Ethernet to check and make correct forwarding decisions.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Note: Y ou should setup ea ch VLAN group with caution. Each Bridge Interface is arranged in this order .
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration S paces next to VPI and VCI, type 0 and 33 in respectively . Select appropriate A TM Class, Encapsulation Method, Acceptable Frame T ype, Filter T ype and PVID for Unt agged Frames. VPI and VCI: Enter the information provided by your ISP .
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Step 3: Setup VLAN Service Go to Configuration Advanced VLAN Bridge DefaultVlan lists all member port s. It is necessary to group specific member ports for each VLAN. From the example, two VLAN groups are requested: Dat a and Video.
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Mapping the VLAN Bridge with Bridge Interface created in S tep1, you will see the conformable relationship in these two screenshot s. Step 4: IGMP Snooping Enable Go Configuration Advanced IGMP .
V oIP/(802.1 1g) ADSL2+ Router Chapter 4: Configuration Save Configuration to Flash After changing the router’s configuration settings, you must save all of the configuration parameters to FLASH to avoid them being lost aft er turning of f or resetting your router .
V oIP/(802.1 1g) ADSL2+ Fire w all Router Chapter 5: T roubleshooting Chapter 5: T roubleshooting If the router is not functioning properly , first check this chapter for simple troubleshooting before contacting your service provider or Billion supp ort.
V oIP/(802.1 1g) ADSL2+ Fire w all Router Appendix A: Product Support and Contact Information APPENDIX A: Product Support and Cont act Information Most problems can be solved by re ferring to the T roubleshooting section in the U ser ’s Manua l .
デバイスBillion BiPAC 7401VPの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Billion BiPAC 7401VPをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBillion BiPAC 7401VPの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Billion BiPAC 7401VPの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Billion BiPAC 7401VPで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Billion BiPAC 7401VPを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBillion BiPAC 7401VPの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Billion BiPAC 7401VPに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBillion BiPAC 7401VPデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。