ZanussiメーカーZT 6905の使用説明書/サービス説明書
ページ先へ移動 of 28
DISHW ASHER ZT 6905 IN S TRUCTION BOOK 152977 34/1 UK COP04.
2 The control panel Description of the appliance 1. Levelling spacers 2. Upper basket stop 3. Upper spray arm 4. Salt container 5. Large filter 6. Detergent dispenser 7. Control panel 8. Rating plate 9. Rinse aid dispenser 10. Central filter 11 . Lower spray arm 12.
3 T ype of load Degree of soil and type of load Required push buttons Recommended quantity of detergent wash prewash Cycle description PRO20en W ashing programmes RINSE & HOLD INTENSIVE 70°C NORM.
4 1. Check the filters Ensure they are clean and properly positioned (see "Maintenance and cleaning"). 2. Press the ON/OFF push button The ON/OFF indicator light comes on. 3. Check that there is rinse aid and salt 4. Load the dishes Remove any scraps of food.
5 Loading your appliance Before placing dishes in the machine, remove any scraps of food, to avoid clogging the filters and consequently reducing the performance. Do not load very small items which can fall through the baskets. The lower basket The lower basket is designed to take saucepans, lids, plates, salad bowls, cutlery etc.
6 The upper basket The upper basket is designed for plates (dessert plates, saucers, dinner plates of up to 25 cm in diameter), salad bowls, cups and glasses. Arrange items on and underneath the fold-down cup racks so that water can reach all surfaces.
Dimensions Width 59.6 cm Height 81.8 - 87.8 cm Max depth 55.5 cm Max depth with open door 1 1 1.4 cm Electrical connection V oltage 220/240 V - 50 Hz Motor rating during wash 200 W Power of heating element 2100 W Overall power 2300 W W ater supply pressure Minimum 50 kPa (0.
Instruction Book - part 1 - Before use - Maintenance - Installation 1 Contents Important safety information 2 Before use 3 Setting the water softener 3 Filling with salt 4 Filling with rinse aid and a.
Installation ● This appliance is heavy . Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way . ● Care must be taken to ensure that the appliance does not stand on the electrical supply cable.
3 Before use Before using your dishwasher for the first time: 1. Ensure that the electrical and water connections comply with the installation instructions 2. Remove all packaging from inside the appliance 3. Set the water softener 4. Pour 1 litre of water inside the salt container and then fill with salt 5.
4 Filling with salt Attention! Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in dishwasher , especially table salt, will damage the water softener . Only fill with salt just before starting a washing programme.
5 Rinse aid Rinse aid is automatically added during the last rinse, ensuring thorough rinsing, and spot and streak free drying. The dispenser , which is positioned inside the door , holds about 1 10 ml of rinse aid, which is sufficient for 16 - 40 dishwashing programmes, depending upon the dosage setting.
6 Use of detergent Only use detergents specifically designed for use in dishwashers. We recommend the use of Finish detergents which are available in the following options: Finish Double Action T ablets. Each tablet has the exact amount of detergent required, simply place in the dispenser .
7 T o save energy Place dishes in the machine immediately after every meal and wait until the dishwasher is full before washing. If necessary run the Rinse and Hold programme (see "W ashing Programmes" chart) so that any food scraps do not become caked on the dishes while you are waiting to run the complete wash programme.
8 Internal cleaning Ensure that the seals around the door , the detergent and rinse aid dispensers are cleaned regularly with a damp cloth. We recommend the use of Finish Dishwasher Cleaner every 3 months or run a 65°C wash without dishes using detergent.
9 External cleaning Clean the external surfaces of the machine and control panel with a damp soft cloth. If necessary use only neutral detergents. Never use abrasive products, scouring pads or solvent (acetone, trichloroethylene etc.
10 Something not working Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer . The dishwasher is fitted with a number of alarm systems which can help you to quickly determine the cause of any problems.
11 If after all these checks, the problem persists, contact your local Service Force Centre, quoting the model and serial number . This information can be found on the rating plate located on the right hand side of the dishwasher door . This product should be serviced by an authorised Service engineer , and only genuine spare parts should be used.
12 Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. Any plumbing work required to install this appliance should be carried out by a qualified plumber or competent person. Remove all packaging before positioning the machine.
13 min 30 cm max 100 cm max 100 cm + 2 m max CS10 Ø 18 Ø 21 W ater outlet hose connection The end of the drain hose can be connected in the following ways: 1. T o the sink outlet spigot, securing it if necessary with a clip. 2. Hooked over the edge of the sink using the special curved plastic guide ( if provided ).
14 Electrical connection This appliance must be earthed. The manufacturer declines any responsibility should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for the socket, it must be cut off and the appropriate plug fitted.
Service and spare parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Zanussi Service Centre by telephoning: 08705 929 929 Y our telephone call will be automatically routed to the Service Force centre covering your post code area.
To contact your local Service Force Centre telephone 08705 929 929 CHANNEL ISLANDS GUERNSEY Guernsey Electricity PO Box 4 Vale, Guernsey Channel Islands GY1 3AD JERSEY Jersey Electricity Company Haut .
To contact your local Service Force Centre telephone 08705 929 929 MIDLANDS BIRMINGHAM 66 Birch Road East Wyrley Trading Estate Witton Birmingham B6 7DB BOURNE Pinfold Road Bourne PE10 9HT BRIDGNORTH 68 St.
Service and spare parts In the event of your appliance requiring service, or if you wish to purchase spare parts please contact your local Zanussi Service Centre by telephoning: 08705 929 929 Y our telephone call will be automatically routed to the Service Force centre covering your post code area.
.
.
From the Electrolux Group. The world’ s No.1 choice. The Electrolux Group is the world’ s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.
デバイスZanussi ZT 6905の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Zanussi ZT 6905をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはZanussi ZT 6905の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Zanussi ZT 6905の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Zanussi ZT 6905で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Zanussi ZT 6905を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はZanussi ZT 6905の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Zanussi ZT 6905に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちZanussi ZT 6905デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
