ZonetメーカーZSR0104UPの使用説明書/サービス説明書
ページ先へ移動 of 51
B ROADBAND F IREWALL R OUTER WITH 1-USB + 1-P ARALLEL P RINT S ERVER P ORT U SER ’ S M ANUAL V1.0 Trademarks.
Windows 95/98/Me and Windows NT/2000/XP are registered trademarks of Microsoft Corporation. All other br ands and product names are tradem arks of their respective companies.
Table of Contents 1. INTRODUCTION ............................................................................................................................. 1 P RODUCT O VERVIEW ......................................................................
W INDOWS SMB P RINTING ............................................................................................................... 35 6.FIREWALL CONFIGURATION ........................................................................................
1. Introduction Product Overview Congratulations on your purchase of this Broadband Firewall Router. During the design process, we have given much thought to making th is device as convenient to use as possible.
One User’s Manual or CD (including quick guide) Network Software Requirements The Broadband Firewall Router requires one of the following types of software: Windows 95/98/Me or Windows NT/20.
One external DSL modem with an RJ-45 (LAN) interface One external Cable modem with an RJ-45 (LAN) interface 3.
2. Hardware Inst allation Overview This chapter details the step- by-step procedure required for correct installation of the Broadband Firewall Router hardware. Topics discussed in this chapter include connecting and disconnecting the Broadband Firewall Router to and from the modem, the network, and the power unit.
Connecting Broadband Firewall Router to the Network 1. Connect one end of the UTP cabl e to the Broadband Firewall Router. 2. Connect the other end of the UTP cable to any network computer. 3. The connection is complete. Connecting the AC Power Adapter 1.
3. Getting S tarted Overview Configuring the Broadband Firewall Router for the first time can be done using the following method: To configure the Broadband Firewall R outer uses the web browser. Note: The configuration procedures described in this chapter are for basic setup purposes only.
Setting up the Broadband Firewall Router using the Web browser Overview We’ve designed an easy-to-use web-based configur ation interface in t he device.
6. It then enters the Broadband Fi rewall Router main setup menu as shown in the following figure. 7. Click the Connection Setup , and the following box will appear.
Configuring Windows 95/98/Me or Windows NT/2000/XP (DHCP-capable) Computers Each PC that supports DHCP and is located on your LAN must be configured so it can communicate with the Broadband Firewall Router. Follo w these steps to configure the reset of the PCs on your LAN.
5. Click Obtain an IP address automatically . 6. Click OK . 7. Click OK . 8. Restart your computer . You are now ready to use your Web br owser or other Internet applications.
DHCP server to dynamically allocate and assign addresses (since you’ve already assigned IP addresses to each computer). The following steps use an example pre-existi ng network of computers with IP addresses 204.1.1.1 through 204.1.1.154 (IP addresses of Class C, without any IP sub-networks).
7. In the LAN Settings , enter the IP address you se lected in Step 1 (such as 204.1.1.100) in the LAN IP Address field. 8. Enter the subnet mask 255.255.255.0 in the Subnet Mask field. 9. Enter the IP address you selected in Step 1 (such as 204.1.1.100) in the Default Gateway field.
Configuring Non-DHCP Computers The Broadband Firewall Router can be used wit h computers that do not support DHCP. Follow these steps to identify and configure non-capable DHCP computers. 1. Determine if any computer s on your network are not DHCP capable.
2. Type the current password into Old Password . 3. Type your new password into New Passw ord . 4. Confirm the new password into Re-type New Password . 5. Click “ Apply ”. 6. The password is now set. Setting Date and Time One function of Broadband Firewall Rout er is that it allows you to set the initial time when you install the device.
Traffic Report You can view the network traffic report for the Broadband Firewall Router’s WAN port and LAN-to-Internet. Click the Basic Settings button in the top column, and then choose “ Traffic Report ”. The following box will appear. 1. Click “ WAN Port ”, and the box pictured below will appear.
Private IP Address: User’s LAN IP. Internet Connection: User browses Public IP. Port No.: User’s service number. Event Log : The Broadband Firewall Router can record all in formation that you want, including “Hacker attack”, “Connection from LAN to WAN”, and “Connection from WAN to LAN”.
Please follow these steps to setup “ Save & Restore CFG ” Setting. A. To “ Save ” setting: Click the “ Save ” button, it saves the current rout er’s setting to a file “CFG.BIN”. B. To “ restore ” setting: i. Click the “ Browse ” button, and select the CFG.
Note: To load the default values by using the reset button, please see the Appendix . 4. Advanced Configuration Overview Once you've finished the basic setup (in C hapter 3) of the Broadband Firewall Router, the Broadband Firewall Router should be able to func tion properly.
Preparation: Connecting to the Broadband Firewall Router In order to proceed with the advanced configuration of t he Broadband Firewall Router, you need to have completed the Broadband Firewall Router ’s basic setup detailed in Chapter 3. 1. Open the web browser in your Windows 95/98/Me or Windows NT/2000/XP computer.
3. You can assign a IP address group’s name to include the IP range from “Starting IP Address” to “Ending IP Address”. Service Group : 1. Click Advanced Settings in the top column. Then click Group Setup . 2. Click Service Group , and the following picture will appear.
Enable DHCP Server : This option allows you to enabl e or disable the Broadband Firewall Router’s DHCP feature. By default, the DHCP service of the Broadband Firewall Router is enabled . Enable DNS Relay : This option allows you to enable or disable the DNS relay feature in the router inside.
A. Insert the IP and MAC address. B. Click “ Add ”. C. The procedure is now completed. IP Lease Range : This option allows you to change the DHCP IP Lease Range. DMZ Setup The DMZ Host can be accessed from the public Internet via the IP address associated with the DSL/Cable service.
3. In the Enable Multiple DMZ field, choose “ Yes ”. By default, the DMZ feature of the Broadband Firewall Router is disabled . 4. In the Public (WAN) IP Address field, type the WAN IP that you want. In the Private (LAN) IP Address field, type the LAN IP of the computer you wish to make visible to the public Internet.
2. Due to the nature of the NAT implemented, only one user at a time can access the same VPN server on the Internet through this device. This means that two private network users cannot access the same VPN server locate on the public Internet simultaneously.
service to a designated host that can process reques ts for a specific Internet service on your LAN. 1. Click Advanced Settings in the top column. Then click Service Setup . 2. Click Local Server Mapping , and the box below will then appear. 3. Select TCP or UDP .
3. Enable DDNS: You want to use “DDNS”, or not. 4. Type username. 5. Type password. 6. Domain name: It is your domain name. 7. Mail Server’s Domain Name: It is your Mail server name. 8. Use Wildcard: You want to use “wildcard”, or not. 9. Click “Apply”.
TCP/IP Protocol Installation 1. Click Start , point to Settings and select Control Panel . 2. Double click the Network icon. 3. If the TCP/IP Protocol is not already installed, click Add . 4. Select Protocol and click Add . 5. Select Microsoft from the Manufacturers list.
3. Click Netw ork Print Server Setup Wizard . 4. Click Next , the wizard will automatically discover the print server. 28.
5. Select the print server port t hat you want to configure and click Next . Port 1 for Parallel port and port 2 for USB port. 6. Select No if you don’t want to change the configuration and click Next .
7. Choose the printer, which you want to connect. Click Next . 8. Setup program will display the summary of your setting. Click Next . 30.
9. Installation complete. Click Finish . Windows NT LPR Port Installation 1. Click Start , point to Settings , and select Printer . 2. Run Add Printer .
3. The Add Printer Wizard screen will appear, Select My Computer and click Next . 4. Click Add Port . 5. From the Printer Ports box as show n in the following picture, select the LPR Port . 6. The Add LPR compatible printers box will then appear as shown in the following picture.
4. From the type of Create a new port box as shown in the following picture, select the Standard TCP/IP Port , Click Next and Next . 5. The Add Standard TCP/IP Printer Port Wizard box will then appear.
6. In the Configure Standard TCP/IP Port Monitor box as shown in the following pi cture, select LPR from Protocol, type in a queue name: lp1 for Parallel Port (Port 1) or lp2 for USB Port (Port 2). 7. Click OK , and Next . Note: Please DO NOT type any other name than lp1, lp2 in this step.
11. A message reading, “To confirm that the printer is installed properly, you can print a test page”. Select Yes (Recommended) and click Next . 12. Click Finish . 13. Done. Windows SMB Printing 1. Click Print Server Setup in the top column, and the following box will appear.
4. Double click it again. 5. Now you have to install the printer’s driver. 6. Choose it from the “Add Printer Wizard”. 36.
7. Install printer successfully. 8. Now, you can find your printer’ s icon and use the SMB printing mode. 37.
6.Firewall Configuration Overview An Internet firewall allows approved traffic in and out according to a predetermined plan. A firewall is a safeguard security mechanism that provides protection between LAN and WAN. It protects the intranet from intrusion by out sides and hackers, thus providing a secure environment for users.
9. “Allows Broadcast Packets” allows for broadcast packets by-pass. The default is “ Yes ”. 10. “Allows IP Source Routing” could protec t against a hacker using another IP to attack your network. The default is “ No ”. 11. “Enable Remote Web Management to this Router” default is “ No ”.
Internet (WAN) to LAN Access Rule Broadband Firewall Router could be according to administrator’s request to create WAN to LAN Access Rules. You could follow the procedure to setup it. 1. Click Advanced Settings in the top column. Then click Firewall Setup .
3. If you want to start up the feature, you must choose “ Yes ” in “ Enable URL Blocking ”. The default is “ No ”. 4. Fill in the URL or Key Word that you want to restrict access to. 5. Webpage Content Filtering: A. Active X: Allows or disallows the Active X packet pass-through.
4. Fill in administrator’s e-mail. 5. Fill in SMTP mail server’s IP address. 6. Click “ Apply ”. 7. The facility is now set up. 42.
7. Upgrading the Broadband Firewall Router Overview As new firmware for the Broadband Firewall Router is released in the future, you can upgrade your Broadband Firewall Router. The upgr ade procedure will use the DOS-based TFTP program on Windows NT/2000/XP.
5. Click the “ Browse ” button, and pick the firmware file. 6. Click the “ Upgrade ” button. 7. The upgrade is now completed. Upgrading the Router on UNIX (using TCP/IP) 1. Log in as root. 2. Ensure that upgrade BIN file is locat ed in your current working directory.
8. T roubleshooting Problem A IP Address Conflicts If you start up your Windows 95/98/Me or Windows NT/2000/XP computer and the following message dialog box shows — indicating an IP addr ess conflict — please follow the directions given below. Solution Windows 95/98/Me 1.
4. Click OK. 5. Done. Windows NT/2000/XP 1. At your NT’s DOS prompt, type ipconfig /release and press [ Enter ]. 2. Next, type ipconfig /renew and press [ Enter ].
47 Appendix Loading the Default Values Once you have configured the Broadband Firewa ll Router (see Chapters 3 and 4), the configuration settings are saved in the Broadband Firewall Router’s internal memory. However, you can manually reset them to fact ory defaults by using the web browser or by following the steps given below: 1.
デバイスZonet ZSR0104UPの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Zonet ZSR0104UPをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはZonet ZSR0104UPの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Zonet ZSR0104UPの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Zonet ZSR0104UPで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Zonet ZSR0104UPを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はZonet ZSR0104UPの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Zonet ZSR0104UPに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちZonet ZSR0104UPデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
