Black BoxメーカーLMC5116C-R3の使用説明書/サービス説明書
ページ先へ移動 of 20
LMC5022C-R3 LMC5110C-R3 L MC5116C-R3 LMC5182C-R3 LMC5023C-R3 LMC5111C-R3 L MC5117C-R3 LMC5026C-R3 LMC5113C-R3 L MC5180C-R3 LMC5027C-R3 LMC5114C-R3 L MC5181C-R3 High-Density Media Converter System II Layer 2 Modules True Layer 2 conversion enables you to extend y our network up to 40 kilometers over duplex fiber.
FCC and IC RFI Statements Page 2 724-746-5500 | blackbox.com LMC5022C-R3 FCC and Industry Canad a RF Interference Statem ents Class B Digital Device. This equipment has been tested and found to c omply with the limits for a Class B computing device pursuant to Part 15 of the FCC Rules.
Certifications LMC5022C-R3 724-746-5500 | blackbox.com Page 3 Certifications European Directive 2002/ 96/EC (WEEE) requires that any equipment that bears this symbol on product or packaging must not be disposed of with unsorted municipal waste.
Table of Contents Page 4 724-746-5500 | blackbox.com LMC5022C-R3 Table of Contents Part Numbers .................................................................................................. 5 1. Specifications ....................................
Part Numbers LMC5022C-R3 724-746-5500 | blackbox.com Page 5 Part Numbers Part Number Description LMC5022C-R3 TX/FX-MM1300-ST LMC5023C-R3 TX/FX-MM1300-SC LMC5026C-R3 TX/FX-SM1310/PLUS-ST LMC5027C-R3 TX.
Chapter 1: Specifications Page 6 724-746-5500 | blackbox.com LMC5022C-R3 1. Specifications DC Input L2 w/LFPT: 0.80 Amp @ 5V Operating Temperature: +32° F to +122° F (0° C to +50° C) Storage Tempe.
Chapter 2: Overview LMC5022C-R3 724-746-5500 | blackbox.com Page 7 2. Overview: About the High-Density Media Conv erter System II Lay er 2 Modules The L2 is a Fast Ethernet module whic h provide s a si ngl e conversion between 100BASE-TX twisted pair and 100BASE-FX/ SX single-mode or multi-mode fiber.
Chapter 3: Configuration Page 8 724-746-5500 | blackbox.com LMC5022C-R3 3. Configuration The L2 has user-configurable features (e.g., FiberAlert (FA), TX LinkLoss (TXLL), FX LinkLoss (FXLL), Link Fault Pass-Thro ugh (LFPT) and Far End Fault (FEF)).
Chapter 4: Install the High-Density Media Converter System II Layer 2 Modules LMC5022C-R3 724-746-5500 | blackbox.com Page 9 4. Install the High-Density Media Conv erter System II Layer 2 Modules The Managed Media Converter Mod ule s install in Black Box SNMP manageable High-Density Media Conv e rter System II chassis.
Chapter 4: Install the High-Density Media Converter System II Layer 2 Modules Page 10 724-746-5500 | blackbox.com LMC5022C-R3 SNMP Management Module, the High Density L2 Module with Configuration Control will function ba sed on its DIP Switch settings.
Chapter 4: Install the High-Density Media Converter System II Layer 2 Modules LMC5022C-R3 724-746-5500 | blackbox.com Page 11 DIP Switch on S1 Feature Default Setting 1 Auto Negotiation (AN) ON 2 Far .
Chapter 4: Install the High-Density Media Converter System II Layer 2 Modules Page 12 724-746-5500 | blackbox.com LMC5022C-R3 pulses, it knows that the device to which it is connect ed is up and sending pulses, and that the copper or fiber cabl e coming from that device is intact.
Chapter 4: Install the High-Density Media Converter System II Layer 2 Modules LMC5022C-R3 724-746-5500 | blackbox.com Page 13 Regardless if there is a break in segm ent 1, 2 or 3, the link will drop on the switches at both ends. The link faul t is passed throu gh the media conversion and is observed at each end.
Chapter 4: Install the High-Density Media Converter System II Layer 2 Modules Page 14 724-746-5500 | blackbox.com LMC5022C-R3 WARNING Enable FiberAlert at the remote side of a media co nversi on only. Enabling it on both sides would keep both transm itters disab led indefinitely.
Chapter 4: Install the High-Density Media Converter System II Layer 2 Modules LMC5022C-R3 724-746-5500 | blackbox.com Page 15 4.4 Auto Negotiation on High-Density Media Converter Sy stem II Layer 2 Modules L2 modules include the feature Auto Negotiation.
Chapter 5: Operation Page 16 724-746-5500 | blackbox.com LMC5022C-R3 5. Operation 5.1 LED Operation Each L2 module features diagno stic LE Ds that provide information on features and ports.
Chapter 6: Troubleshooting LMC5022C-R3 724-746-5500 | blackbox.com Page 17 6. Troubleshooting • During installation, first test the fiber and twisted pai r connections with all troubleshooting features disabl ed, t hen enable these features, if desired, just before final installation.
Chapter 7: Contacting Black Box Page 18 724-746-5500 | blackbox.com LMC5022C-R3 7. Contacting Black Box Black Box Customer Service Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) Free technical support, 24 hours a day , 7 days a we ek.
Chapter 8: Fiber Optic Cleaning & ESD Precautions LMC5022C-R3 724-746-5500 | blackbox.com Page 19 8. Fiber Optic Cleaning Guidelines Fiber Optic transmitters and receiv ers are extremely susceptible to contamination by particles of dirt or dust, which can o bstruct the optic path and cause performance degra dation.
LMC5022C-R3, Rev. 1 50-80921BB-01 Rev A0.
デバイスBlack Box LMC5116C-R3の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Black Box LMC5116C-R3をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBlack Box LMC5116C-R3の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Black Box LMC5116C-R3の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Black Box LMC5116C-R3で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Black Box LMC5116C-R3を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBlack Box LMC5116C-R3の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Black Box LMC5116C-R3に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBlack Box LMC5116C-R3デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。