ACTiメーカーE45の使用説明書/サービス説明書
ページ先へ移動 of 27
Bullet Camera Hardware Manu al E44, E45, E46 V er . 2014/ 05 /05.
w w w .a ct i. co m Hardware Manual 2 T able of Contents Precautions 3 Safety Instructions ........................................................................... 5 Introduction 6 List of Models ....................................................
w w w .a ct i. co m Hardware Manual 3 Precautions Read these instructio ns Y ou s hould read all the saf ety and operating instructi ons before usin g this produc t. Heed all warnings Y ou must adhere to all the warnings on the prod uct a nd in the instructi on m anual.
w w w .a ct i. co m Hardware Manual 4 Federal Communic ations Commission Statement This equipment has been tested and foun d to com ply with the limi ts for a class B digital device , pursuant to Part 15 of the FCC Rules. These lim its are designed to provide r easonable protection ag ainst harmf ul interf erence in a residential installation.
w w w .a ct i. co m Hardware Manual 5 Safety Instructions Cleaning Disconnect this video prod uct from the po wer supply before cleaning. Attachments Do not use attachm ents not recommended b y the video pr oduct m anufacturer as they m a y cause hazards.
w w w .a ct i. co m Hardware Manual 6 In troduction List of Models This hardware m anual contains the follo wing models : E44 2MP Bullet with D/N, Adaptive IR, Basic W DR, SLLS, Vari-foc al lens E45 1.
w w w .a ct i. co m Hardware Manual 7 Package Contents Camera Bracket Plate Sunshield Drill Template Mounting Screw Kit Sunshield Scre w Kit Conduit Gland Cable Gland W asher W arranty Card Quick Inst.
w w w .a ct i. co m Hardware Manual 8 Physical Descri ption Side View Back View 1) Ethernet Connector Connects to the net work and power sourc e. See E rror ! Reference source not fou nd.
w w w .a ct i. co m Hardware Manual 9 Installation Procedure s Step 1: Mount the Ca mera 1. Attach the brack et to the cam era. 2. Mark the location of the screw holes b ased on the dr ill tem plate included in the pack age.
w w w .a ct i. co m Hardware Manual 10 Step 2: W aterproof and Connect the Cable(s) The camera and the pre- installed network cable, “pigtail”, are resistant to salt, water , weak acid, alcohol, oil, grease and o ther comm on solvents.
w w w .a ct i. co m Hardware Manual 11 How to Use the Cable Gland This section describes how to waterproof the c able- out or “pigtail” of the cam era using the bundled cable gland.
w w w .a ct i. co m Hardware Manual 12 2. Insert the clam ping nut into the Ethernet ca ble. 3. Insert the sealing insert with claw . 4. Insert the gland bod y into the Ethernet cable. 5. On the “pigtail” side, insert t he washer into t he “pigtail”.
w w w .a ct i. co m Hardware Manual 13 6. Connect the Etherne t cable connector to th e “pigtail” connect or . 7. Attach the gland bod y to the “pigtail”. NOTE: Mak e sure the gland bod y is tightly attached to the “p igtail” and the washe r is secured between them .
w w w .a ct i. co m Hardware Manual 14 How to Use the Conduit Gland This section describes how to waterproof the c able- out or “pigtail” of the cam era using the bundled conduit gland an d flexible conduit. This is the recommended soluti on if an exterior-grade Ethern et cable is not availab le.
w w w .a ct i. co m Hardware Manual 15 2. Pull the Ethernet cable through the flex condu it. Leave enough length of the cable outside the flex conduit. 3. Insert the clam ping nut through t he flex conduit. 4. Insert the sealing nut an d fix it at the end of the flex condu it.
w w w .a ct i. co m Hardware Manual 16 6. On the “pigtail” side, insert t he washer into t he “pigtail”. 7. Connect the Etherne t cable c onnector to the “pigta il” connector .
w w w .a ct i. co m Hardware Manual 17 9. Push the flex conduit an d insert the sealing nut in to the gland bo dy . NOTE: Mak e sure the clamping nu t is tightl y attached to the cable gland b ody and the sealing insert is squeeze d tightly . 10. Attach the clam ping nut to complete the ca ble solution.
w w w .a ct i. co m Hardware Manual 18 Step 3: Connect to Netw ork Connect the other en d of the net work cable to a s witch or injector . Then, connect the s witch or injector to a network , PC, and a power sourc e. See Power -over-Ethern et (PoE) connection example below .
w w w .a ct i. co m Hardware Manual 19 Other Adjustments and Accessor ies Adjust the Vie wing Angle 1. Open the front cover . 2. Based on the live vie w from the cam era, adjust the focal length and focus of the t arget area. 3. W hen done, close the front cover .
w w w .a ct i. co m Hardware Manual 20 Attach the Sunshield The use of sunshie ld is optional if the cam era will be ins talled indoors. However , if the camera will be installed outdoors, attach the sunshield to protect the lens from all types of weather and lighting conditions.
w w w .a ct i. co m Hardware Manual 21 Accessing the Camera Configure the IP A ddresses In order to be able to communicate w ith the camera from y our PC, both the camera and the PC have to be within the same networ k s egment.
w w w .a ct i. co m Hardware Manual 22 By double-click ing with the left mouse on the camera model, it is possible to autom atically launch the default browser of th e PC with the IP address of the target camera filled in the address bar of the bro wser already .
w w w .a ct i. co m Hardware Manual 23 Us ing the Default Camera IP A ddress If there is no DHCP server in the given network, the user ma y have to assign the IP ad dresses to both PC and cam era m anually to make sure they are in the s ame network segment.
w w w .a ct i. co m Hardware Manual 24 Manually adjust the IP addresses of mu ltiple came ras: If there are m ore than 1 camera to be used in th e same local area network and there is no DHCP server to ass ign unique IP addresses to each of them , all of the cameras would then have the i nitial IP a ddress of 192.
w w w .a ct i. co m Hardware Manual 25 Access the Ca mera Now that the cam era and the PC are both ha ving their unique IP addresses an d are under the same network s egment, it is possible to use the Web browser of the PC to access the camera.
w w w .a ct i. co m Hardware Manual 26 The follow ing examples in this m anual a re based on Internet Explorer brow ser in order to cover all functions of t he camera.
Copyright © 2014, A CTi Corporation All Rights Reserved 7F , No. 1, Alley 20, Lane 407, Sec. 2, Ti-Ding Blvd., Neihu District, T aipei , T aiwan 1 14, R.
デバイスACTi E45の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
ACTi E45をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはACTi E45の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。ACTi E45の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。ACTi E45で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
ACTi E45を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はACTi E45の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、ACTi E45に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちACTi E45デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。