Blaupunktメーカー3.3の使用説明書/サービス説明書
ページ先へ移動 of 88
Operating Instructions (long version) Mobile Nav igation T ravelPilot Lucca 3.3 Lucca3_3_long_GB.indd 1 Lucca3_3_long_GB.indd 1 18.10.2006 15:05:18 Uhr 18.
2 Device Ov er view Device Overview Lucca3_3_long_GB.indd 2 Lucca3_3_long_GB.indd 2 18.10.2006 15:05:19 Uhr 18.10.2006 15:05:19 Uhr.
3 The follo wing button ar e located be- side the display: 1. Pow er (Screen ON/OFF): Long pr ess (longer than three seconds): Switches the pow er on/off. Shor t press: Switc hes the screen on/off. (batter y saving mode) 2. Menu : Long pr ess (longer than three seconds): Opens the main menu screen of the device.
4 The underside featur es the f ollowing controls: 7. USB Port 8. Connects the Lucca to the suction cup Device Overview Lucca3_3_long_GB.indd 4 Lucca3_3_long_GB.
5 Contents Device Overview ......................2 Safety not es .............................9 Safe ty Notes f or Navigation ............ 9 Safety No tes f or Handling the Lucca .............................................. 9 Initial Startup of Lucca .
6 Contents Exiting the Menu ....................... 22 Additional F unctions .................. 22 GPS Info ..................................... 23 Route Planning ........................... 23 Select Map ................................. 23 Performing Basic Settings .
7 Contents Managing Routes .......................... 45 Saving a rout e ............................ 45 Loading a r oute .......................... 46 Calculating a Route ....................... 46 Displaying the Rout e on the Map . 4 7 Simulation (demo mode) .
8 Contents Unblocking ................................. 63 Confi guring Lucca/ Basic Settings ........................64 Settings ........................................ 64 Language ................................... 64 Home Address ...............
9 Safety no tes For y our personal benefi t, please carefully read t he follo wing safe ty not es and warnings befor e operating your L ucca for the fi r st time.
10 the engine since the GPS receiv er constantly uses electricity and could discharge the v ehicle bat- ter y. • Do not unplug the connect or by pulling on the wire. The wire could be damaged! • Do not use harsh solv ents to clean the device; use only a dam p, lint- free clot h.
11 • CD/DVD with eur opean road map and operating instructions (long versions) Optional Accessories: • Carr ying Case • DC Adapter • USB Cable • Second car kit • VAN/SUV Suction Cup • Ho.
12 Setting the Language If the Lucca is switc hed on for the fi r st time, US English is used as the standard language. If necessar y , you may hav e to se t the desired language for the menus and t he voice output: T urn on the Lucca using the Power button.
13 state of the batt er y (0 to 3 seg- ments). Not e: If the charge stat e of the batt ery is ver y low , a warning message is displayed. T o charge the batt er y , attach the supplied charger t o the char ging sock et. Not e: Use only original chargers f or op- erating and charging the batt er y.
14 Press the suction plat e of the sup- por t against the glass. Push the lever on t he suction cup to wards the glass. The track f or mounting the Lucca must be aligned vertically. Removing the Suction Cup If you change v ehicles, you can simpl y remov e the suction cup.
15 Po w er On/Off Power- on T o power on the L ucca, push the Power button. The device switc hes on and dis- play s the logo screen. Activating the Idle State T o activate the idle stat e, briefl y push the Power button. The Lucca switches t o the idle state (scr een off state).
16 Menu Button Quick Settings In the Quick Se ttings menu volume and brightness can be adjusted. The Quick Se ttings menu can be enter ed at any time independent of the cur - rent menu being active. T ouch the Menu butt on. The Quick Se ttings menu display s.
17 cordingly bef ore the batt ery runs out. Press the OK butt on to confi rm. Operating the Navigation Menus Software K e yboard If te xt entries are r equired, the t ouch- screen display s a software k eyboar d. Y ou can per form all entries using your fi nger .
18 Switching between Number , Umlaut and Character Input T o enter numbers, suc h as postcode, touc h the button T o return t o the charact er entry mode, touc h T o enter an umlaut, touc h the button. The umlaut ke yboard is displa yed. As soon as you ent er an umlaut, the charact er k eyboard is aut o- matically display ed again.
19 er , you can also directly t ouch an entr y t o accept it. : T ouch this butt on to scr oll up in the list by one page (5 ele- ments). : T ouch this butt on to scr oll down in the list b y one page (5 elements). T o scroll through t he list by sev eral pages, repeat edly t ouch the corre- sponding button.
20 T ouch the GPS Info butt on. The GPS Status menu displa ys. • GMT: Greenwic h Mean Time Lon- don time without daylight sa vings time. • Longitude/L atitude, current P osi- tion: Information of the east longi- tude and nor th latitude. ➜ • Satellit es: N umber of sat ellites received.
21 Navigation General Notes about the Navigation The use of the Lucca is at y our own risk. Caution: Do not operat e the Lucca while driv- ing to pr ot ect yourself and o thers against accidents! View.
22 The Navigation menu allow s access t o all the functions of the navigation. Entering a Destination T ouch the Destination entry but- ton t o enter a destination for the navigation. For further details, please read the section "Entering a Destination".
23 GPS Info T ouch the GPS Info butt on t o ob- tain information about the current GPS status and about your current position. Route Planning T ouch the Itinerary button to plan a rout e with several stages. For further details, please read the section "Route Planning with S tag- es".
24 Not e: The selection is facilitated b y the display of the capit ols in the re- spective time zone. T ouch the OK butt on. If daylight savings time curr ently applies to y our position, t ouch the Daylight saving time butt on. The button displa ys a c heck mark.
25 Specifying a Destination This section contains information about the different me thods for en- tering, selecting and managing desti- nations with the L ucca. How t o star t the na vigation to a des- tination is described in the chapt er "Destination Guidance".
26 T ouch the Country button. The list of countries display s. T ouch the countr y in which y our destination is located. The Address menu displa ys. ➜ ➜ Note: Y ou can only select countries which are at least partially displayed on the currently loaded map.
27 Not e: If the countr y containing your des- tination is not display ed in the t op line, touc h the button and select the correct country. How t o select a countr y is described in the chapt er "Entering a Destina- tion Countr y". T ouch the T own fi eld and enter the target location.
28 • Save: – This function allo ws y ou t o save the specifi ed address to your favourit es. For further details, please read the chapt er "Saving one of the r ecent destinations".
29 T ouch the Surrounding Ra- dius fi eld and select the radius in which you ar e looking for a point of int erest. T ouch the Cat egor y fi eld and select the category (e.
30 Note: Y ou do not have t o fi ll out the fi elds Categor y and Subcategory. They are onl y intended t o restrict the list of points of inter est in the Point of int er est fi eld. This list can quickly become v er y ext ensive, par ticularly at larger locations.
31 In the Point of int er est menu, t ouch the ...in a to wn button. The submenu display s. ➜ Note: If the countr y containing your des- tination is not display ed in the fi rst line, touc h the button twice and select the correct country. How t o select a countr y is described in the chapt er "Entering a Destination Countr y".
32 category (e.g. museum, theatre, ...) from which y ou want t o look for points of int erest. Only those subcat egories are avail- able for selection f or which points of inter est can be located in t he speci- fi ed to wn. T ouch the Point of Int erest fi eld.
33 In the Point of int er est menu, t ouch the ...nationwide butt on. The submenu display s. ➜ Note: If the countr y containing your destination is not display ed in the fi rst line, touch t he button twice and select the correct coun- tr y . How t o select a countr y is de- scribed in the chapt er "Entering a Destination Countr y".
34 category. The y also contain the charact ers you ent ered (if you en- ter ed any c haracter s). T ouch the entr y of the point of in- ter est to whic h you want t o navi- gate. If you desire mor e detailed inf or - mation about the point of inter est, touc h the More button, follo wed by Show details.
35 ing in the t op left corner . Y ou can zoom out by plotting a di- agonal star ting in the bo ttom right corner . Not e: Y ou can also zoom in and out using the / buttons.
36 • T ouch the Start navigation but- ton t o use the selected location as place of destination for the na viga- tion. Notes: – This function is only available with GPS reception.
37 Copying the Destination from the F avourites The favourit es contain all the destina- tions you sav ed using the Sav e but- ton. Y ou can per form the f ollowing in this menu: • Accepting destinations for the navigation, • renaming navigation destinations, and • deleting saved destinations.
38 Additional F unctions T ouch the More butt on t o gain ac- cess to additional functions of t he F avourit es menu. The list of Additional functions display s. It contains the follo wing functions: • Show details: – T ouch the Show details butt on to sho w the address of the se- lected destination.
39 Select the desired destination. T ouch the OK butt on. The destination is copied and the address is ent ered in the corre- sponding fi elds. Additional F unctions T ouch the More butt on t o gain ac- cess to additional functions of t he Last des tinations menu.
40 Not e: The rout e type used for t he rout e calculation is automatically select- ed from the se tting which you de- fi ned in the Routing options menu.
41 A menu for ent ering a name is dis- played. Enter a name f or the destination. T ouch the OK butt on. The destination is saved in t he Fa - vourit es . Saving one of the Recent Destinations Prerequisit e: • Y ou opened the Las t destinations list as described in the chapt er "Copying one of the Recent Desti- nations".
42 T ouch the More butt on. T ouch Rename entry . A menu for ent ering a name is dis- played. Enter a ne w name for t he destina- tion. T ouch the OK butt on.
43 T ouch Delete all . A confi rmation is displayed. T ouch OK to dele te t he list - or - touc h not t o delet e the list. ➜ ➜ ➜ Route Planning with Stages Y ou can also per form the rout e plan- ning without GPS receiver , e.g. in the comfort of your home.
44 The Destination entry menu dis- play s. Defi ne the route point similar t o the destination entr y . For more in- formation, see the c hapt er "Enter - ing a Destination". T ouch the Add butt on. The Itinerary menu displays. The defi ned destination is list e d as rout e point 1.
45 Changing the Order • Move r oute point up: Select the rout e point t o be moved. T ouch the More butt on. T ouch the Mov e target up button. The Itinerar y menu is displayed again, the selected r out e point is moved up in the r out e list by one position.
46 Loading a rout e T ouch the More butt on. T ouch Load rout e . Select the desired r oute. T ouch OK . Calculating a Route A planned rout e can also be calculat- ed without GPS reception so t hat you can gain an overview of the trip. In this case, the fi rst defi ned route point is set as the starting point of the rout e.
47 Displaying the Route on the Map T ouch the Show butt on to display the entire r oute on the map. The map is displayed. The rout e is highlighted in blue. The specifi ed rout e points are identifi ed by fl ags. Simulation (demo mode) T ouch the map.
48 T ouch the Speed profi le fi eld to change betw een the available pr o- fi les. T ouch the T ype of routing fi eld to c hange between t he various modes: • F ast route – This option calculates the shor t est rout e for t he requir ed time.
49 Destination Guidance Prerequisit e: • Y ou specifi ed a place of destina- tion as described in the chapt er "Entering a Destination" - or - • you select ed a place of destination fro.
50 Disturbed GPS Reception A message appears after ent ering the destination if no adequate GPS signal is received. • If you are in an enclosed room, move t o the outside. The L ucca re- quires a vertical line tow ards the sky . If the GPS reception is disturbed during the destination guidance, the navigation is st opped.
51 W orking with the Map Map Operation In this section you learn which in- formation and which pr ocessing op- tions are available in t he map view . Depending on whether y ou display a map without or during the navigation, different options ar e available f or op- eration.
52 Buttons Different butt ons are available in t he map view with whic h you can adjust the display accor ding to y our needs. With Map View without GPS Reception • Show/hide butt ons – More This button allo ws y ou t o hide the other butt ons to gain a bett er overview of the map.
53 constantly jump back t o the cur- rent position. This mode should also be set if you w ant to select destination points from the map during the navigation. • Zooming/Mo ving – T ouch the Zoom / Move button t o switch between zoom and move mode.
54 • Zoom out – T ouch this butt on t o zoom out of the map. • Zooming le vel bar betw een the buttons / – T ouch one of the sections of the bar t o zoom in or zoom out of the map. • Zoom in – T ouch this button to zoom in on the map. • Quit navigation – T ouch this button to q uit the navigation.
55 ther details, please read t he section "Blocking Rout e Segments". Inserting an Interim Destination T ouch the Interim destination button t o inser t a new interim des- tination during the navigation. The route is recalculat ed so that this interim destination can be ap- proached as the ne xt destination.
56 Map Display during Destination Guidance During a navigation, the map displa y show s different navigation t ools, rout e information and one additional button: Navigation T ools The left and lower .
57 • The lower str eet fi eld display s the current street name. Route Information The right area of the map displa ys the follo wing rout e information: – : This symbol represents stages. All information below it refer s to t he next destination.
58 Caution The information on the digital r oad maps may be incorrect due t o shor t- term changes (construction, etc.)! The traffi c situation and the local signpost information ha ve priority over the inf or mation of the L ucca.
59 T ouch the button to r eturn to t he Settings menu. Route Information Select the Route information se t- ting with the butt on. Switch the desired r out e informa- tion on or off with the correspond- ing buttons. The corresponding information f or the next stage (upper ar ea) and the complet e route (low er area) is displayed on t he map.
60 In the Speed limit menu you can de- fi ne whether speed limits should be displayed during t he navigation and whether y ou should be warned au- dibly if you ar e ex ceeding the speed limit. • Display signs T ouch the Show traffi c signs but- ton t o change between the modes Show traffi c signs : Alway s, On speeding only or Never .
61 Additional F unctions during Navigation The follo wing functions can be used during a navigation: • Inser ting an int erim destination • Skipping a stage • Blocking route segments Inser ting an Interim Destination During the navigation, y ou can inser t a new int erim destination at any time.
62 Approaching the Ne xt Destination This function is only available during a navigation on a rout e with at least one interim point. Use this function if you w ant to skip the next r oute point. T ouch the Ne xt destination but- ton t o approach the next t o one rout e point.
63 Briefl y touch an y position on the map. Select the Block road entry. The Block r oad menu displays. Enter the number of kilome tres, star ting with y our current posi- tion, which you w ant to bloc k. The route is r ecalculated and t he block ed rout e segment is evaded.
64 Confi guring Lucca/ Basic Settings Settings Y ou can per form settings in the L ucca for the f ollowing areas: • Language • Home address • Map information • Route inf ormation • Routing .
65 Home Address In the Home addr ess menu, you can stor e your home address so t hat you can quickly na vigate home fr om any location. T ouch the Enter y our home ad- dress butt on. T ouch the Address butt on and enter y our home address in the "Entering a destination addr ess" section.
66 Not e: This information is only displa yed if you navigat e to several loca- tions. Routing Options In the Routing options menu, y ou can defi ne the speed profi le of your ve- hicle, select the type of routing and ex clude certain streets from usage.
67 • Display signs T ouch the Show traffi c signs but- ton t o change between the f ollow- ing modes: – Show traffi c signs: Always, – Show traffi c signs: On speed- ing only or – Show traf.
68 • 3 D auto zoom – Select whether y ou desire aut o zoom or no auto zoom as de- fault in 3-D view during a navi- gation. • 2 D auto zoom – Select whether you desire low aut o zoom, standard aut o zoom, high auto zoom or no auto zoom during a na vigation with 2-D view .
69 • Time T ouch this fi eld to t oggle between 12-hour and 24-hour display . • Distance T ouch this fi eld to t oggle between the display in kilome tres and miles. Representation In the Repr esentation menu, you can set the brightness f or day and night mode.
70 Product Information T ouch this fi eld t o display the v er - sion of the map being used and the version of the na vigation soft- ware. ➜ GPS Mode of Operation The Global Positioning Sy stem (GPS) was developed in t he 70s by the US militar y . GPS is based on a to tal of 24 satel- lites that ar e orbiting the earth and sending out signals.
71 If the Lucca r eceives the signals fr om at least 3 satellit es, it can determine its position and display it on the map. This position can then be used as the star ting point f or a rout e calculation. Since a positioning and position dis- play is carried out once ev er y second, you can view y our mov ement on the map.
72 Push the SD card int o the SD card slot according t o the marking on the slot until the car d engages. Selecting MP3 Mode If you are in a differ ent operating mode, Press the Menu butt on longer than 3 seconds. The main menu display s. T ouch the Music Play er butt on.
73 T ouch the fi le to which y ou want t o listen b y using the arro ws t o scroll up and down in the list. The MP3 menu is displayed again and the selected MP3 fi le star ts playing. Playback the MP3 File T o select the next fi le in the MP3 list, touc h the butt on in the MP3 menu.
74 Removing the SD Card Y ou quit the MP3 mode by t ouch- ing the button in the Mp3 menu. Carefully push on the SD car d in the slot until it disengages. The SD card is eject ed a little bit and can be remov ed. ➜ ➜ Picture Viewer Mode The Lucca can also be used t o view pictures that are st ored on the in- ser t ed SD card.
75 T ouch the Picture Viewer butt on. The Pictures vie wer menu displa ys. The fi rst picture in the pictur e fi le recognised by t he Lucca is dis- played. ➜ Selecting a Picture fi le T o select the next pictur e in the fi le list, touch t he next fi le by us- ing the arrow s to scroll down on the Pictur es Viewer menu.
76 At the last slide the Question No- tice where the slide sho w is fi n- ished will appear . Starting the F ull Screen T ouch the F ull button to vie w the full screen with all the pictur es in the fi le list. On the full screen mode, you can move t o the pr evious or next fi le by using the arro w icon.
77 Removing the SD Card Y ou quit the Picture Viewer mode by t ouching the butt on in the Pictur es viewer menu. Carefully push on the SD car d in the slot until it disengages.
78 Switch off and on the Lucca again by pressing t he Power button for a fe w seconds. A dialog menu displays. F ollow the instruction to install the str eet map. Det ermine whether t o load the con- tent of the r oad map int o the main memor y of the device or whe ther the Lucca should load the data fr om the SD card during the navigation.
79 Disposal of old unit (EU countries only) Do not dispose of your old unit in the household trash! Please use the return and collection syst ems available t o dispose of the old unit. Ser vice In some countries Blaupunkt offers a specifi c repair ser vice including a pick -up ser vice.
80 W arranty We pr ovide a manufacturer's w arran- ty for our pr oducts purchased within the European Union. F or devices pur - chased outside the European Union, the warranty terms issued b y our re- spective responsible domestic agen- cy are valid.
81 The internal navigation softwar e re- mains intact and you can use either the internal na vigation software or the one on the SD card f or the selec- tion. Is the old internal navigation soft- ware ov erwritten with a change of the navigation software? No, the syst em can navigat e with the internal as w ell as the e xternal data.
82 Blaupunkt GmbH, Rober t-Bosch-S traße 200, D-31139 Hildesheim 10/06 CM-AS/SCS1 (GB) 8 622 405 254 Countr y: Phone: F ax:/www : Germany (D) 0180-5000225 05121-49 4002 www.
Mobile Navigation T ravelPilot Lucca 3.3 DE Die Lucca hat eine neue Ein-/Ausschaltlogik! Es gibt zwei Ausschaltzustände der L ucca: Den Ruhestand (Kurzdruck auf die Schaltfl äche Power ). Das vollständige Ausschalt en aller F unktionen (Langdruck länger als 3 Sekunden auf die Schaltfl äche Power ).
NL De Lucca is voorzien van een nieuwe aan-/uitschak ellogica! Er zijn twee uitsc hakelt oestanden van de Lucca: De ruststand (de Power knop k or t indrukken). Het volledig uitsc hakelen van alle functies (langer dan 3 seconden op de Power knop dr ukk en).
DK Lucca-navigationssyst emet er udstyret med et logisk tænd/sluk -system! Lucca-navigationssy st emet har t o sluktilstande: Dvaletilstand (k ort tr yk på skærmknappen Power ). F uldstændig deaktivering af alle funktioner (langt tryk i mere end 3 sekunder på skærmknappen Power ).
HU A Lucca új be-és kikapcsoló logiká val rendelk ezik! A Lucca k ét kikapcsolási állapo ttal felszer elt: A nyugalmi állapo t (rövid n yomás a Power ) kapcsolómezőre. Az összes funkció teljes kik apcsolása (a Power kapcsolófelület et hosszabban, mint 3 másodperc len yomv a tar tani).
Mobile Navigation T ravelPilot Lucca 3.3 CC DE Beiliegendes Kartenmaterial (Backup CD-ROM) Ihrer Lucca 3.3 CC liegt de tailliertes Kartenmaterial zu den auf der V er pa- ckung genannt en Ländern (bzw. dem L and) bei. Entgegen den Angaben in den Bedienungsanleitungen umfasst dies nicht Gesamt-Europa.
PT Mapas anex os (CD-ROM de segurança) Juntamente com o seu L ucca 3.3 CC, recebe mapas pormenorizados dos países (ou país) mencionados na embalagem. Contrariamente às indicações nas instruções de ser viço, eles não abrangem toda a Eur opa. P oderá adquirir mapas de outros países europeus no comér cio da especialidade.
デバイスBlaupunkt 3.3の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Blaupunkt 3.3をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBlaupunkt 3.3の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Blaupunkt 3.3の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Blaupunkt 3.3で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Blaupunkt 3.3を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBlaupunkt 3.3の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Blaupunkt 3.3に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBlaupunkt 3.3デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
