BlueantメーカーSuperTooth IIの使用説明書/サービス説明書
ページ先へ移動 of 73
.
OVERVIEW The SuperTooth II is equipped with Bluetooth Technology and a Digital Signal Processor which allow wireless communica tions on devices such as Mobile phones, Smartphones and PDA’s. It is designed to be a totally portable wireless handsfree kit which will enable the user to communicate freely without holding a phone.
CONTENTS OVERVIEW ..................................................................................................... 2 CONTENTS .................................................................................................... 3 GETTING STA RTED .
GETTING STARTED VEHICLE PLACEMENT The optimum place to position the Supertooth II in the vehicle is on the sun visor. The Supertooth II sun visor clip is designed to be re versible to easily transfer the Handsfree Kit in case you change the position of the sun visor.
CHARGING THE SUPERTOOTH II SuperTooth II can be charged in a car using the SuperTooth II Ca r Charger or a t home using the Wall charger. 1. Connect the charger’s plug into the Charger Input of SUPERTOOT H II. Charge Ind icator Status: • Red = Low battery • Steady Green = Fully charged • Alternate Red/Green = indicates charging 2.
BLUETOOTH P AIRING PROFILES IMPORTAN T NOTICE!!! You must establish the correct Bluetooth Pairing Mode for your mobile phone before connecting. If your handset is not listed on the next page, look in your phones manual to find the right Bluetooth Profile to use.
SUPERTOOTH II COMPATIBILITY Required Profile Phone models Headset Hands free BlackBerry 7100v / 7100g / 7 290 / 7250 I-Mate PDA2K / PDA2K EV-DO / SP3 / SP3i I-Mate Jam / Pocket Pc / Smartphone.
EXAMPLE PROCEDURE FOR PAIRING TO A MOBILE PHONE • Pairing to your phone is not possible while charging the Supertooth. • First, refer to the Compatibility Table above for suggeste d pairing modes to deter mine w hat pairing mode is be st for your phone.
HANDSFREE pairing: (Example) 1. Bring the mobile phone to about 20cm from SuperTooth II. 2. The Supertooth I I is initially off. Turn it on by flipping up the Sw i vel Arm to the 55º position. The Bluetooth Ind icator will glow (blue blink). 3. Simultaneously press the Reject Button and the Pick-Up/Hang- Up Button f or about 10 seconds.
HEADSET Pairing: (Exa mple) 1. Bring the mobile phone to about 20cm from the Su pertooth II. 2. SuperTooth II is initially off. Turn it on by flipping up the Sw ivel Arm to 55º position. The Bluet ooth Indicator will glow (blue blink). 3. Simultaneously press the Reject Button and Pick- Up/Hang-Up B utton for abo ut 10seconds.
Note: If pairing has failed, repeat t he pr ocedure. If pairing succeeded, then your SuperTooth II kit is now ready to us e. You can now make or ans wer a call using your kit instead of your phone.
MAKING/RECEIVING CALLS AN S W E R I N G A C AL L When the phone receives a call, a ring ton e is heard on SuperToo th II and at the same time on the telephone (depe nding on your phone model). 1. Shortly press the Pick-Up/Hang-Up Bu tton to an swer the call.
Redialing (Han dsfree profile only) Make a long press on the Pick-Up/ Hang-U p Button . Audio will be on the Supertooth II. Audio Transfer Kit to Phone Flip down the Swiv el A rm to 0º position (or turn-off the unit). This will automatically transfer the audio from the kit to t he phone.
VOLUME LEVELS – Finding The Right Balance 1) The Supertoot h II has a very powerful speaker that is designed to boost low level voice signals if required. Use the Volume Control Knob to turn down levels if too much signal is present and distortion or echo occurs .
MANUALS FOR INDIVIDUAL MOBILE PHONES If your phone doe s not appear below , please u se a manual fo r a similar phone or use the Ex ample Pairing procedure above. Al so chec k the w ebsite for newly updated models and also for older outdated mo dels. www.
BLACKBERRY 7100v / 7100g / 7290 / 7250 Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest ver sion. You may need to register your de vice to download upda tes.
2. When answering is done on the phone, ongoing call w ill be heard on the p hone (not on the Supe rtooth) . But i f you w ish to hear and transfer the audio to the Supertooth, j ust press the Pick-Up/Han g-Up button on ce o n the Supertooth . 3. To terminate th e ca ll, press dow n the P ick-Up/Hang-Up B utton.
IMATE POCKET PC / JAM Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant si te to check you ha ve the latest version. You will need to register your de vice to download upda tes. For Imate go to www.
d. MAKING A CALL with the Handsfr ee Ki t on Normal diali ng With your Imate you can make a call using different methods. Please re fer to y our PC Phone’s User Guide. The most direct method is by using the Phone key pad. 1. Press button to brin g up the dialer scre en.
IMATE PDA2k / PDA2K EV-DO Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant si te to check you ha ve the latest version. You will need to register your de vice to download upda tes. For Imate go to www.
d. MAKING A CALL with the Supertooth on Normal diali ng With your Device you can make a call using di fferent methods. Plea se refer to y our PC Phone’s User Guide. The most direct method is by using the Phone key pad. 1. Press button to brin g up the dialer scre en.
IMATE SP3/SP3i Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant si te to check you ha ve the latest version. You will need to register your de vice to download upda tes. For Imate go t o www.
d. MAKING A CALL Normal diali ng With your Phone you can make a call using differen t methods. Please refer to y our PC Phone’s User Guide. The most direct method is by using the Phone key pad. 1. Tap the number on the phone’s keypad, and then press the Talk key on the phone.
I-MATE SMARTPHONE 2 Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant si te to check you ha ve the latest version. You will need to register your de vice to download upda tes. For Smartphone 2 go to www.
d. MAKING A CALL with the Handsfr ee Ki t on N ormal dia ling With your Smartph one2 you can make a cal l using different me thods. Please refer to your PC Phone’s U ser Guide . The most direct method is by using the Phone key pad. 1. Press button to brin g up the dialer scre en.
HP IPAQ 6315 / 6365 / 6385 Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest ver sion. You may need to register your de vice to download upda tes. For Hp 6365 go to www.
d. MAKING A CALL with the Supertooth on Normal diali ng With your Device you can make a call using di fferent methods. Plea se refer to y our PC Phone’s User Guide. The most direct method is by using the Phone key pad. 3. Press button to brin g up the dialer scre en.
MOTOROLA A10 00 / A925 / A835 a. ACTIVATING THE BLUETOOTH You must activ ate the Bluetooth featu re of y our cell phone to establish a Blu etooth conne ction between y our mobile phone and o ther Bluetoo th dev ices. 1. Tap Menu icon at top right of screen.
Flip down the Sw i ve l Ar m to 0º position (or turn-o ff the un it). This will automatica lly tran sfer the audio from the kit to the phone. Phone to Kit Flip the Sw ivel Ar m up fr om 0º to 5 5ºor 210º po sition (Turn-On the Kit). Then press shortly the Pick-Up/Hang-Up Button.
MOTOROLA V3 / V80 / V525 / V535 / V600 / V620 / E398 a. ACTIVATING THE BLUETOOTH You must activ ate the Bluetooth featu re of y our cell phone to establish a Blu etooth conne ction between y our mobile phone and o ther Bluetoo th dev ices.
Voice d ialing Refer to step h and i for th e procedure when activ ating and re cording for voice dialing . 1. Press the Pick-U p/Hang-Up Button on ce to activ ate the voice dialing . 2. A beep will th en be heard on the Hand sfree Kit pr ompting the u ser to say the name of the per son to call.
5-Way Navigation Ke y featured as to access Menu. Scroll to Phonebook, SELECT . 2. Choose a con tact that you w ant to make a voice dial to, then press . C hoose Edit, then press SELE CT. 3. On the Entry D etails, choose “…MORE…” and press SE LECT.
NOKIA 6255/ 6230/6820/66 50/6310/631 0 i a. A CTIV ATING THE BLUETOOTH You must activ ate the Bluetooth featu re of y our cell phone to establish a Blu etooth conne ction between y our mobile phone and o ther Bluetoo th dev ices. 1. Press Menu and select Settings , Connectivity and Bluetooth .
d. A NSWERING/R ECEIVIN G A CA LL When the phone is receiving a call, same ring tone w ill be heard simultaneously on the Handsfree Kit as w ell as on the phone. 1. Press once on the Pick-Up/H ang-Up Butto n to answer the call. 2. End the call by pre ssing the Pick-Up /Hang-Up Button .
i. RECORDING FOR VOICE DI ALING Use your phone w hen recording voice dialing. 1. Press Menu and select Contacts and Search. 2. Choose the name w hich you w ant to make a voice di al then pres s Details . 3. Press Options and se le ct Add voice tag . Follow the instr uctions that are displayed .
NOKIA 3230/ 6260/6600/66 70/7610/365 0 a. A CTIV ATING THE BLUETOOTH You must activ ate the Bluetooth featu re of y our cell phone to establish a Blu etooth conne ction between y our mobile phone and o ther Bluetoo th dev ices. 1. Press the Menu key .
d. A NSWERING/R ECEIVIN G A C ALL When the phone is receiv ing a call, a ri ng tone w ill be heard on the Handsfr ee Kit as w ell as on the phone. 1. Press the Pick-Up/ Hang-Up Bu tton on ce to answ er the call. 2. End the call by pre ssing the Pick-Up /Hang-Up Button .
i. SETTING THE VOLUME Setting the v olume can be d one during cal ls or ev ery time a key is pressed on y our cell phone. 1. Turn it clockw ise to inc rease the vo lume. 2. Decrease the v olume by turning it counter- clockw ise. Note: If the volume is too high, it can ca use feedba ck (whistling sound), ec ho or background noise during calls.
NOKIA 9500 / 9300 Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant site to check you have the latest ver sion. You may need to register your de vice to download upda tes. For Nokia 9500 go to www.
d. MAKING A CALL Normal diali ng With your Phone you can make a call using differen t methods. Please refer to y our PC Phone’s User Guide. The most direct method is by using the Phone key pad. 1. Tap the number o n the phone’s key pad, and then press the Talk key on the phone.
NOKIA WIRE LESS AUDIO ADAPTER AD-5 B The Nokia Bluetooth adapter supports Blue tooth Headset Profile only, Therefore the Supe rtooth needs to be placed into Head set Pairing Mode first. a. PA IRING TO THE CELLUL AR PHONE 1. The Supertoo th II is initially off.
Note: Audio will be heard directly on the Handsfree Kit. At times, for first ti me dialing, audio will be heard on the phone and not immediatel y on the Handsfree Kit. If this i s the case you ha ve to press once on the Send Butto n to transfer th e audio to the Ki t.
02 XDA11s Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant si te to check you ha ve the latest version. You will need to register your de vice to download upda tes. For Xda11s go to www.
d. MAKING A CALL with the Supertooth on Normal diali ng With your Device you can make a call using di fferent methods. Plea se refer to y our PC Phone’s User Guide. The most direct method is by using the Phone key pad. 1. Press button to brin g up the dialer scre en.
O2 XPHONE2 Note: Please make sure yo u have the late st firmware upgrade for your phone. Go to the support se ction of the following websi te to check you have th e late st version. You will need to register your devi ce to download upda tes. For Xphone2 go to www.
d. MAKING A CALL Normal diali ng With your Phone you can make a call using differen t methods. Please refer to y our PC Phone’s User Guide. The most direct method is by using the Phone key pad. 1. Tap the number o n the phone’s key pad, and then press the Talk key on the phone.
O2 XDA11 / XDA MINI Note: Please make sure you ha ve the latest firm ware up grade for your Phone. Go to the suppor t section of the relevant site to che c k yo u have the la test version . You will need to regi ster your device to download update s. For XDAII go to www.
d. MAKING A CALL with the Handsfr ee Ki t on Normal diali ng With your XDA II you can make a call using di fferent methods. Please re fer to y our PC Phone’s User Guide. The most direct method is by using the Phone key pad. 1. Press button to brin g up the dialer scre en.
02 XPHONE Note: Please make sure you have the latest firmware upgrade for your Phone. Go to the support section of the relevant si te to check you ha ve the latest version. You will need to register your de vice to download upda tes. For Xphone go to www.
1. Press button to brin g up the dialer scre en. 2. Tap the number in to the key pad, and then tap Talk key. Note: Audio will be heard directly on the Handsfree Kit. At times, for first time dialing, audio will be heard on the phone and not immediatel y on the Handsfree Kit.
PALM TREO 650 Note: Please make sure yo u have the late st firmware upgrade for your phone. Go to the support section of the following website to che ck you have the late st ver sion. You will need to register your de vice to download upda tes. For Treo 650 go to www.
The most direct method is by using the Phone key pad. 4. Tap the number o n the phone ’s keypad, and then pre ss the DI AL key on the phone. Note: Audio will be heard directly on the Supertoo th. At times, for first time dialing, audio will be heard on the phone and n ot immediatel y on the Supertoo th.
PANASONIC P342i / X700 / X70 a. A CTIV ATING THE BLUETOOTH You must activ ate the Bluetooth featu re of y our cell phone to establish a Blu etooth conne ction between y our mobile phone and o ther Bluetoo th dev ices. 1. Go to M enu by pressing the ce nter button of the 5-w ay nav igation key fea tured as .
the voice diali ng. 2. Beep will then be heard on the Super tooth prompting the user to say the nam e of the pe rson to cal l. 3. Say the name. The name will be played back to you. The phone w ill then place the call automatically . In case the cell phone does no t recognize the name spo ken, the steps above may be repeated .
6. Follow the instructi ons on the screen. Voice is then saved on the phone. Under Voice Dial list, the name which alr eady has a v oice command appears. 7. Continue pressing to exit. Note: Noisy environ ment may affect voic e recognition. Record your voice in a quiet enviro nment.
SHARP GX30/GX32/GX15/GX25 a. A CTIV ATING THE BLUETOOTH You must activ ate the Bluetooth featu re of y our cell phone to establish a Blu etooth conne ction between y our mobile phone and o ther Bluetoo th dev ices. 1. Press to display Main Menu. 2. Highlight Setti ngs , and then press to select.
e. AUDIO TRAN SFER Audio Transfer can be done by accessi ng the cell phone’ s Menu during ong oing calls. Kit to Phone Flip down the Swiv el Arm to 0º po sition (or turn-o ff the un it). Thi s will automatically transfer the audio fro m the kit to the pho ne.
SIEMENS S65 / S55 a. A CTIV ATING THE BLUETOOTH You must activ ate the Bluetooth featu re of y our cell phone to establish a Blu etooth conne ction between y our mobile phone and o ther Bluetoo th dev ices. 1. Press Menu button. S croll to Setup , SELECT.
2. A beep will th en be heard on the Hand sfree Kit pr ompting the u ser to say the name of the per son to call. 3. Say the name. The name will be played back to you. The phone w ill then place the call automatically. In case the cellular phone does not recognize the name spoken, the steps ab ove may be repeated.
SIEMENS SX1 a. A CTIV ATING THE BLUETOOTH You must activate the Bluetoo th feature of your mobile phone to establish Blueto oth connection b etween it and other Blue tooth dev ices. 1. Press Menu key Setup Bluetooth . 2. is highlighted . Pres s Options Change .
c. AU T O ACC E P T M O D E 1. Press Menu k ey Setup Bluetooth . 2. is highlighted . 3. Sway the joy stick t o the rig ht to view Paired devi ces w indow . 4. Choose the name of this hands-free kit and press Options Set as authorised . 5. A statement “Connections will take place without confi rmation.
i. RECORDING FOR VOICE DI ALING Note:Voice dialing entries must be stored in the phone’s memory (not on the SIM card!). 1. Press Menu Key Contacts . 2. Choose and Open an en try y ou want to make a voice dial . 3. Under the selected entry , high light the phone number and press Options Add voi ce tag.
SONY ERICSSON K700i / S700i / Z1010 / Z600 / T610 / T628 / T630 a. A CTIV ATING THE BLUETOOTH You must activ ate the Blue tooth featu re of your phone to establi sh a Bluetooth connection between y our cell phone and other Blu etooth dev ices. 1. Press to a cces s Main M enu.
d. MAKING A CALL with the Handsfr ee Ki t on Normal diali ng 1. Enter th e contact n umber and pres s Call key. Audio will be heard on the Hand sfree Kit. 2. Shortly pre ss the Pick-Up/Hang-Up Button to terminate the cal l. Voice dialing Make a call by saying a v oice name/v oice tag.
j. RECORDING FOR VOICE DI ALING Note:Voice dialing entries must be stored in the phone’s memory (not on the SIM card!). 1. Press to access Main Menu. Scro ll to Settings and press Select . Choose Voice control , Select . Voice dialing , Sel ect . Edit names , Select .
SONY ERICSSON P800 / P900 / P910 a. ACTIVATING THE BLUETOOTH You must activ ate the Bluetooth featu re of y our cell phone to establish a Blu etooth conne ction between y our mobile phone and o ther Bluetoo th dev ices. 1. Flip to open mode. On the phone’s Application s window , scroll to Control Panel and tap it using the “ stylu s” .
Voice dialing Refer to step g and h for th e procedure when activ ating and re cording for v oice dialing. 1. Press the Pick-U p/Hang-Up Button on ce to activate the voice dialing. 2. A beep will th en be heard on the Hand sfree Kit pr ompting the u ser to say the name of the per son to call.
FREQUENTLY ASKED QUESTIONS (FAQ) 1. Am I using the correct pairing Mode accordin g to m y phone? 2. Why won’t my Supertooth II won’t go into Pairing mode? 3. Is my Supertooth II Charged? 4. Why will my Supertooth II not conn ect when turned on or comes into range (10m)? 5.
4. Why will my Supertooth II not conne ct wh en turned on or comes into range (10m)? • Make sure you ar e using the co rrect profile for your phone, Headset or Handsfree.
Contact Us: For Connection Assistan ce or if y ou are having difficulties using your Supertooth II, please make an enquiry to support@ blueant.com.au or on our website www.blueant.com.au or call us on 1300 669 049 (AUS) 0800 443 122 (NZ) BlueAnt Warranty Process 1.
Warranty Terms and Conditions 1. Blueant Warrant the original pur chaser of this prod uct only. 2. Blueant will replace or repair any fault y product provided it has not been misused or abused in any way. 3. There are no user serviceable part s inside this product.
Specifications : Bluetooth Standard ............................... Bluetooth V1.1, Class II Frequency ............................................. 2.4GHz Maximum communication distance....... Approx. 10m Operating Talk Time .........................
www.blueant.com.au PH: 1300 669 049 (AUS) PH: 0800 443 122 (NZ) 73.
デバイスBlueant SuperTooth IIの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Blueant SuperTooth IIをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBlueant SuperTooth IIの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Blueant SuperTooth IIの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Blueant SuperTooth IIで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Blueant SuperTooth IIを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBlueant SuperTooth IIの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Blueant SuperTooth IIに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBlueant SuperTooth IIデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
