Bosch AppliancesメーカーX20の使用説明書/サービス説明書
ページ先へ移動 of 130
VideoJet X20 Network Video Server en Installation and Operating Manual.
VideoJet X20.
Vide oJ et X20 Table of Cont ents | en 3 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 T able of Contents 1P r e f a c e 7 1.1 About this Manual 7 1.2 Conventions in this Man ual 7 1.3 Intended Use 7 1.4 EU Directives 8 1.
4 en | Table of Cont ents Vid eoJ et X20 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 5.19 Advanced Mode: Encoder Profile 48 5.20 Advanced Mode: Audio 51 5.21 Advanced Mode: Storage Management 53 5.22 Advanced Mode: Remote Video Device 55 5.
Vide oJ et X20 Table of Cont ents | en 5 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 8.3 Malfunctions with iSCSI Connections 112 8.4 LEDs 113 8.5 Processor Load 114 8.6 Network Connection 114 8.7 Serial Interface 114 8.
6 en | Table of Cont ents Vid eoJ et X20 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems.
Vide oJ et X2 0 Preface | en 7 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 1P r e f a c e 1.1 About this Manual This manual is intended for persons responsibl e for the installation and operation of the VideoJet X20.
8 en | Preface Video Jet X 20 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 1.4 EU Dir ective s The VideoJet X20 networ k video server complies with th e requirements of EU Directives 89/ 336 (Electromagnetic Compatibility) and 73/23, amended by 93/68 (Low Voltage Directive).
Vide oJ et X2 0 Sa fe t y I nfo r ma t io n | e n 9 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 2 Safety Information 2.1 Electric Shock Hazard – Never attempt to connect the unit to any powe r network other than the type for which it is intended.
10 en | S a fe t y I nfo r ma t io n Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems.
Vide oJ et X2 0 Pr oduct Description | en 11 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 3 Product De scription 3.1 Scope of Deliver y – VideoJet X20 network video.
12 en | Product Descrip tion Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 3.2 Sy stem R equirements General Requirements – Computer with Windows XP .
Vide oJ et X2 0 Pr oduct Description | en 13 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 3.3 Over view of F unctions Network Video Server The VideoJet X20 is a compact network vid eo server for two connected video sources.
14 en | Product Descrip tion Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Remote Control For remote control of exte rnal units such as pa n or tilt heads for came ras or motorized zoom lenses, control data is transmitted via the VideoJet X20's bidirectional serial interface.
Vide oJ et X2 0 Pr oduct Description | en 15 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 Summary The VideoJet X20 provides the following main functions: – Video an.
16 en | Product Descrip tion Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 3.4 Connections on the F ront Panel 1U S B 1 / 2 interfaces for future expan.
Vide oJ et X2 0 Pr oduct Description | en 17 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 3.5 Connections on the Rear Panel 8E T H 1 RJ45 socket for connecting to an .
18 en | Product Descrip tion Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems.
Vide oJ et X2 0 Installation | en 19 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 4 Installation 4.1 Preparations The VideoJet X20 features industrial standard eq uipment and is therefor e suitable for both stationary installation and mobile installation in vehicles.
20 en | Installation Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 4.3 Connections Cameras You can connect two video sources to the Vide oJet X20. Any cameras and other video s ources that produce a standard PAL or NTSC signal are suitable.
Vide oJ et X2 0 Installation | en 21 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 SFP Slot You can establish an additional network connection by inserting a mini-GBIC module into the SFP slot for example vi a fiber optic cables (OF).
22 en | Installation Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Alarm Inputs The VideoJet X20 has four alarm inputs on the orange terminal block (see Section 8.8 Terminal Block, page 115 ). The alarm inputs are used to connect to external alarm devices such as door contacts or sensors.
Vide oJ et X2 0 Installation | en 23 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 1. Connect the LED lines to th e appropriate terminals on th e orange terminal block ( RM 1 and RM2 ) and check that the connection is secure.
24 en | Installation Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 4. 4 Powe r O n /Powe r O f f Power Supply The VideoJet X20 does not have a power switch. Power is supplied via a separate unit. Connect the VideoJet X20 to the power supply unit and plug this into the mains.
Vide oJ et X2 0 Installation | en 25 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 Configuring the VideoJet X20 You can start the Configuration Manager immediately after installation. 1. Double-click th e icon on the desktop or st art the program via the Start menu.
26 en | Installation Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 27 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 5 Configuration Using a W eb Brow ser 5.1 Connecting The integrated HTTP server in the VideoJet X20 provides you with the option to configure the unit over the network with a We b browser.
28 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Establishing the Connection Before you can operate the VideoJ et X20 within your network, it must have a valid IP address for your network and a compatible subnet mask.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 29 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 Protected VideoJet X20 If the VideoJet X20 is password protect.
30 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Starting Configuration X Click the SETTINGS link in the upper section of th e win dow. The Web browser opens a new page with the configuration menu.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 31 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 5.3 Basic Mode: Unit Access Device name You can give the VideoJet X20 a name to make it easier to identify.
32 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Password A VideoJet X20 is generally protected by a pass word to prevent unauth orized access to the unit. You can use different author ization levels to limit access.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 33 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 Time server IP address The VideoJet X20 can receive the time signal fr om a time server using various time server protocols, and then use it to set the internal cl ock.
34 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Gateway address If you want the unit to establish a connection to a remote location in a different subnet, enter the IP address of the gateway here.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 35 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 5.7 Basic Mode: Audio You can set the gain of the audio signals to suit your specific requirements.
36 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 5.8 Basic Mode: Recording You can record the images from the cameras connected to the VideoJet X20 on various local storage media or on an appropri ately configured iSCSI system.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 37 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 5.10 Advanced Mode: Identification Device ID Each VideoJet X20 should be assigned a unique identifier that you can enter here as an additional means of identification.
38 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems You can use the second line for entering addition al characters; these can be s elected from a table. 1. Click the icon next to the second line.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 39 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 5.11 Advanced Mode: Passw ord A VideoJet X20 is generally protected by a pass word to prevent unauth orized acce ss to the unit.
40 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 5.12 Advanced Mode: Dat e/Time Date format Select your required date format.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 41 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 8. If there are empty lines at the bottom of th e table, for example after deletions, you can add new data by marking the row and selecting required values from the list fields.
42 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Time stamping This field sets the position of the time overlay. It can be displayed at the Top , at the Bottom or at a position of your choice th at you can then specify using the Custom option.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 43 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 Website language Select the language for the user interface here. Company logo Enter the path to a suitable gr aphic if you want to replace th e manufacturer's logo.
44 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 5.15 Advanced Mode: LIVEP AGE F unctions On this page you can adapt the LIVEPAGE functions to your requ irements.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 45 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 Show VCA trajectories The trajectories (motion lines of objects) from the video content analysis are displayed in the live video image if a corresponding analysis type is activated (see Section 5.
46 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Save system log Check this option to save system messages in a text file on your local computer. You can then view, edit and print this file with any text editor or the standard Office software.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 47 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 5.18 Advanced Mode: Pictur e Se t tings You can set the video image of each camera to suit your requirements. The current video image is displayed in the small window next to the slide controls as confirmation.
48 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 5.19 Advanced Mode: Encoder Pr ofile For the video signal encoding, you can select a code algorithm for each and two profiles for each encoder (video input), and you ca n change the presets for the prof iles.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 49 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 Pre-programmed profiles are available, each giving priority to different perspectives.
50 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Target data rate You can limit the data rate for the VideoJet X20 to optimize utilization of the bandwidth in your network.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 51 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 Video quality This setting allows you to adjust the image quality. The Auto option automatically adjusts to the optimum combination of movement and image definition (focus).
52 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Audio The audio signals are sent in a separate data st ream parallel to the video data, and so increase the network load.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 53 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 5.21 Advanced Mode: S torage Management You can record the images from the cameras co nnected to the VideoJet X 20 on various local storage media or on an appropri ately configured iSCSI system.
54 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Recording media Select the required recording media here so that you can then activate them and configure the recording parameters.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 55 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 Formatting Storage Media You can delete all recordings on a storage medium at any time. 1. Click a storage medium in the Managed s torage media list to select it.
56 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 5.23 Advanced Mode: R ecording Profiles You can define up to ten diff erent recording profiles .
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 57 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 6. For each profile, click the Set button to save the settings in the unit. Standard recording Here you can select the mode for standard recordings.
58 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Recording includes You can specify whether, in addition to vi deo data, audio data an d metadata (for example alarms, VCA data and serial data) should also be recorded.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 59 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 5.25 Advanced Mode: Recor ding Scheduler The recording schedul.
60 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Holidays You can define holidays that are not in the stan dard weekly schedule on which recordings are to apply.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 61 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 5.26 Advanced Mode: Recor ding Status Certain details on the recording status are di splaye d here for information purposes.
62 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 5.27 Advanced Mode: Alarm Connections You can select how the VideoJet X20 responds to an alarm. In the event of an alarm, the unit can automatically connect to a pr e-defined IP address.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 63 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 VIDOS or Bosch Video Management System, yo u can store a general password here. The VideoJet X20 can use this general password to connect to all remote stations protected with the same password.
64 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems You can activate and configure encryption of the media data (v ideo, audio and metadata) on the Encryption page (see Section 5.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 65 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 5.28 Advanced Mode: V CA The VideoJet X20 contains an integrated video co ntent analysis (VCA), which can detect and analyze changes in the signal on the basis of image processing.
66 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 5.29 Advanced Mode: V CA Profiles You can configure two profiles with different VC A configurations. You can save profiles on your computer's hard drive and lo ad saved profiles from th ere.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 67 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 3. Click the Save... button to save the profile settings to another file. A new window is opened, in which you can specify where you wa nt to save the file and what name you want to save it under.
68 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Sensitivity (MOTION+ only) The basic sensitivity of the motion detector ca n be adjusted for the en vironmental conditions to which the camera is subject.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 69 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 Global change You can set how large the global change in th e video image must be for an alarm to be triggered. This setting is independent of the sensor fields selected under Select Area .
70 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 3. Left-click the fields to be activate d. Activated fields are marked yellow. 4. If necessary, click Select All to select the entire vi deo frame for monitorin g.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 71 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 1. Click the profile you want to link in the Time periods field . 2. Click in a field in the table, hold down the mouse button and drag the cursor over all the periods to be assigned to the selected profile.
72 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 5.31 Advanced Mode: V CA Event T riggered This configuration allows you stipulate that the vi deo content analysis is only to be activated when triggered by an event.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 73 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 Trigger active Select the VCA configuration here that is to be enabled via an active trigger. A green check mark to the right of the list field indicates that the trigger is active.
74 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Name The name makes it easier to identify the alar m in exte nsive video monitoring systems, for example with the VIDOS and Bosch Video Management System programs.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 75 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 Mail server IP address Enter the IP address of a mail server that op erates on the SMTP standard (Simple Mail Transfer Protocol).
76 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 5.34 Advanced Mode: Alarm T ask Editor As an alternative to the alarm settings on the various alarm pages, you can enter your desired alarm functions in script fo rm here.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 77 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 5.35 Advanced Mode: Alarm Inputs You can configure the alarm inputs of the VideoJet X20. Alarm input Select Active high if the alarm is to be triggere d when the contact closes.
78 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Operating mode Select an operating mode for the relay. For example, if you want an alarm-activated lamp to stay on after the alarm ends, select Bistable .
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 79 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 5.37 Advanced Mode: C OM1 You can configure the serial interface paramete rs (orange terminal block) to meet your requirements.
80 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Interface mode Select the de sired protocol for the serial interface. 5.38 Advanced Mode: Network The settings on this page are used to integr ate the VideoJet X20 into an existing network.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 81 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 Some changes only take effe ct after the unit is rebooted. In this case, the Set button changes to Set and Reboot .
82 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems The VideoJet X20 uses the TLS 1.0 encryption prot ocol. You may have to activate this protocol via your browser configuration.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 83 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 User name Enter the user name you regi stered at DynDNS.org here. Password Enter the password you regis tered at DynDNS.
84 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems SNMP The VideoJet X20 supports the SNMP V2 ( Simple Network Management Protocol ) for managing and monitoring network components , and can send SNMP messages (traps) to IP addresses.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 85 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 5.40 Advanced Mode: Multicasting In addition to a 1:1 connecti.
86 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Port Assign a different port to each data stream if there are simultaneous data streams at the same multicast address.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 87 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 – Overwrite The same file name is always used and any existing file will be overwritten with the current file.
88 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 5.43 Advanced Mode: Maint enance Firmware The VideoJet X20 is designed in such a way th at its functions and parameters can be updated with firmware.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 89 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 Configuration You can save configuration data for the VideoJ et X20 on a computer and then load saved configuration data from a computer to the unit.
90 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 5.44 Advanced Mode: L icenses You can enter the activation key to release additional fu nctions or softwa re modules.
Vide oJ et X2 0 Configuration Using a Web Brow ser | en 91 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 5.46 F unction T est The VideoJet X20 offers a variety of conf iguration options. You should therefore check that it is functioning correctly after installation and configuration.
92 en | Configuration Using a Web Br owser Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems.
Vide oJ et X2 0 Operati on | en 93 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 6 Operation 6.1 Operation with Microsoft Internet Explorer A computer with Microsoft Intern et Explorer (version 6.
94 en | Operation Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Establishing the Connection Before you can operate the VideoJ et X20 within your network, it must have a valid IP address for your network and a compatible subnet mask.
Vide oJ et X2 0 Operati on | en 95 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 6.2 The LIVEP AGE Once the connection is established , the Web browser displays the LIVEPAGE . It shows the live video image on the right of the browser window.
96 en | Operation Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems View Control Control options for perip herals (for example a pa n/tilt head or dome camera) depend on the type of unit installed and on th e configuration of the VideoJet X20.
Vide oJ et X2 0 Operati on | en 97 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 System Log / Event Log The System Log field contains information about the operating status of the VideoJet X20 and the connection. You can save these m essages automatically in a file (see Section 5.
98 en | Operation Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 6.3 Sa ving Snapshots You can save individu al images from the video seq uence currently show n on the LIVEPAGE in JPEG format on your computer's hard drive.
Vide oJ et X2 0 Operati on | en 99 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 6.5 Running Recording Program The hard drive icon below the camera images on the LIVEPAGE changes during an automatic recording. A moving graphic will appear to indicate a running recording.
100 en | Operation Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 6.6 The RECORDINGS Page The RECORDINGS page for playing back recorded vi deo sequences can be accessed from the LIVEPAGE and from the SETTINGS menu.
Vide oJ et X2 0 Operati on | en 101 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 The time bar offers various options fo r navigation. Red bars indicate the points in time where al arms were triggered. Dr ag the green arrow to navigate to these points quickly.
102 en | Operation Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems significantly higher memory capacity and comp uting power. For this reason, the number of cameras used in this mode can be restri cted in the Configuration Manager program.
Vide oJ et X2 0 Operati on | en 103 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 6.8 Hardware Connections Betwe en V ideo Ser vers A VideoJet X20 with connected camer.
104 en | Operation Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems Connecting with a Terminal Program Various requirements must be met in orde r to operate with a terminal program (see Section 8.9 Communication with Terminal Program, page 116 ).
Vide oJ et X2 0 Operati on | en 105 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 6.9 Operation Using Sof tware Decoders The VideoJet X20 video server combines with VI DOS to provide a high-performance system solution.
106 en | Operation Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems.
Vide oJ et X2 0 Maintenance and Upgrades | en 107 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 7 Maintenance and Upgrades 7.1 T esting the Ne twork Connection You can use the ping command to check the connection between two IP addresses.
108 en | Maintenance and Upgrades Video Jet X 20 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 7.3 Repairs Ensure that all maintenance or repair work is carried out only by qualified pe rsonnel (electrical engineers or network technology sp ecialists).
Vide oJ et X2 0 Appendix | en 109 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 8 Appendix 8.1 T roubleshoo ting If you are unable to resolve a malfunction, please contact your supplier or systems integrator, or go directly to Bosch Secu rity Systems Cust omer Service.
110 en | Appendix Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 8.2 G eneral Malfunctions Malfunction Possible causes Recommended solution No connection between the unit and terminal program. Incorrect cable connections.
Vide oJ et X2 0 Appendix | en 111 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 The unit does not report an alarm. Alarm source is not selected. Select poss ible alarm sources on the Alarm Inputs configuration page. No alarm response specifie d.
112 en | Appendix Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 8.3 Malfunctions with iSCSI Connections Malfunction Possible causes Recommended solution After connecting to the iSCSI destination, no LUNs are disp layed.
Vide oJ et X2 0 Appendix | en 113 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 8.4 LEDs The VideoJet X20 network video se rv er has a number of LEDs on its front and .
114 en | Appendix Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 8.5 Processor L oad If the VideoJet X20 is accessed via the Web browser, you will see the processor load indicators in the top right of the wind ow next to the manufacturer's logo.
Vide oJ et X2 0 Appendix | en 115 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 8.8 T er minal Block The terminal block has several contacts for: – 4 alarm inputs .
116 en | Appendix Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 8.9 Communication with T erminal Program Data Terminal If a VideoJet X20 cannot be foun.
Vide oJ et X2 0 Appendix | en 117 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 Assigning an IP Address Before you can operate a VideoJet X20 in your network you must fi rst assign it an IP address that is valid for your network.
118 en | Appendix Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 8.10 Copyright s The firmware 4.0 uses the fonts "Adobe-H elvetica-Bold-R-Normal--.
Vide oJ et X2 0 Specif icat ions | en 119 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 9 Specifications 9.1 Unit Operating voltage 10 to 30 V DC, power supply via external unit Power consumption Approx.
120 en | Specifications Vide oJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems 9.2 Prot ocols/Standar ds Video standards PAL, NTSC Video coding protocols H.264 Basel ine Profile, MPEG-4, M-JPEG, JPEG Video data rate 9.
Vide oJ et X2 0 Glossar y | en 121 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 10 Glossar y Symbols 10/100/1000 Base-T I EEE-802.3 specification for 10, 100 or 1000 Mbps Ethernet 802.1x The IEEE 802.1x standard provides a general method for authentication and authorization in IEEE-802 networks.
122 en | Glossar y Vid eoJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems H HTTP Hypertext Transfer Protocol: p rotocol for transmitting data over a network HTT.
Vide oJ et X2 0 Glossar y | en 123 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 MPEG-4 A further d evelopment of MP EG-2 designed for tr ansmitting audiovisual data a.
124 en | Glossar y Vid eoJ et X2 0 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems SNTP Simple Network Time Protocol ; a simplified version of NTP ( see NTP) SSL Secure .
Vide oJ et X20 Index | en 125 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 11 Inde x A Activating the recording 60 Activation key 90 Alarm 17 , 42 , 96 Alarm e-mail 7.
126 en | Index Vide oJ et X20 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems M Main functions 15 Maintenance 9 Manufacturer logo 42 Media-replay 100 Milliseconds 42 Mot.
Vide oJ et X20 Index | en 127 Bosch Security Syst ems Installation and Operating Manual DOC | V4.0 | 2009.06 Time z one 40 TLS 82 Transmission parameters 116 Transmission protocol 63 , 81 Transmission.
128 en | Index Vide oJ et X20 DOC | V4.0 | 2009.06 Installation and Operating Manual Bosch Security Syst ems.
.
Bosch Sicherheitssysteme GmbH Robert-Koch-Straße 100 85521 Ottobrunn Germany Telefon 089 6290-0 Fax 089 6290-1020 www.boschsecurity.com © Bosch Sicherheitssysteme GmbH, 2009.
デバイスBosch Appliances X20の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Bosch Appliances X20をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBosch Appliances X20の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Bosch Appliances X20の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Bosch Appliances X20で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Bosch Appliances X20を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBosch Appliances X20の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Bosch Appliances X20に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBosch Appliances X20デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。