AdaptecメーカーRAID 2130SLPの使用説明書/サービス説明書
ページ先へ移動 of 11
-------------------------------------------------------------------- README.TXT Adaptec Storage Manager (ASM) as of June 7, 2007 -------------------------------------------------------------------- Please review this file for important information about issues and erratas that were discovered after completion of the standard product documentation.
-------------------------------------------------------------------- 2. Installation and Setup Notes - The Adaptec RAID Controllers Installation and User's Guide contains complete installation information for direct attached RAID controllers and drivers.
o Novell Netware 6.5* UnixWare: o SCO UnixWare 7.1.4 OpenServer: o SCO OpenServer 6.0 Solaris: o Sun Solaris 10 Update 1 *Out-of-box and current quarterly update or service pack - Adaptec Storage Manager Management Service: o Microsoft Windows - All versions o Red Hat EL 4.
4. Exit Adaptec Storage Manager. 5. Copy the following files onto a diskette from the directory where the Adaptec Storage Manager is installed: RaidMSys.ser --> to replicate the tree RaidNLst.ser --> to replicate the notification list RaidSMTP.ser --> to replicate the SMTP e-mail notification list RaidJob.
than above. Be sure to check the version string on the Novell Linux CD. - To run Adaptec Storage Manager under Red Hat Enterprise Linux AS 3 Quarterly Update 3 for AMD64, you must add the 'noexec32=off' argument to the boot kernel command line.
a pool, do not remove and reinsert any drive from that pool. Doing so may cause unpredictable results. - Do not move drives containing a pool or volume from one controller to another while the power is on. Doing so could cause the loss of the pool configuration or data, or both.
pool, information about the hot spare drive may not display as expected. Adaptec Storage Manager may continue to display it as a global hot spare. -------------------------------------------------------------------- 4. Operating System-Specific Issues and Notes 4.
- When you delete a pool, the operating system can no longer see the last pool. WORKAROUND: To allow Linux to see the last pool, restart your system. For iSCSI Storage (only), you can restart the iSCSI daemon or reload the iSCSI HBA driver. - The controller does not support attached CD drives during OS installation.
agent failed to start" displays when starting the server. The server is unable to load the Storage Manager agent. This is usually caused by loading Java before the Storage Manager agent. In the file Autoexec.ncf, move the line "LOAD RAIDAGNT -BOOT" so that it is before any lines that reference Java.
- With Linux kernel versions 2.4 and 2.6, the ARCCONF DELETE <logical_drive> command may fail with a Kernel Oops error message. Even though the drives are removed from the Adaptec Storage Manager GUI, they may not really be deleted. Reboot the controller; then, issue the ARCCONF DELETE command again.
for enclosure management devices (JBODs) are blank (unpopulated). - On rare occasions, Adaptec Storage Manager may report that there is insufficient space to create a mirror plex.
デバイスAdaptec RAID 2130SLPの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Adaptec RAID 2130SLPをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAdaptec RAID 2130SLPの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Adaptec RAID 2130SLPの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Adaptec RAID 2130SLPで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Adaptec RAID 2130SLPを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAdaptec RAID 2130SLPの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Adaptec RAID 2130SLPに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAdaptec RAID 2130SLPデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
