Bosch Power ToolsメーカーNWC45510Pの使用説明書/サービス説明書
ページ先へ移動 of 110
Dinion IP NWC-455-10P | NWC-455-20P en Operating Instructions.
.
Dinion IP | en 3 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 T able of Contents 1 Introduction 15 1.1 Type number overview 16 1.2 Unpacking 16 1.3 System requirements 17 1.4 Overview of functions 17 1.4.1 Wide dynamic range 18 1.4.2 Power-over-Ethernet 18 1.
4 en | Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 4.2.2 Install menu 28 4.3 Adjustment procedure DC-iris Lens 28 4.4 Adjustment procedure Manual-iris Lens 29 4.5 Adjustment procedure Video-iris Lens 29 4.6 Install IP address submenu 29 4.
Dinion IP | en 5 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 7.4.1 Selecting an encoder profile 48 7.4.2 Changing profiles 50 7.4.3 JPEG posting 53 7.5 Camera settings 55 7.5.1 ALC 55 7.5.2 Enhance 56 7.5.3 Color 57 7.5.4 Ins taller options 5 8 7.
6 en | Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 7.12.3 Motion detector 77 7.12.4 Sensitivity 78 7.12.5 Tamper detection 79 7.13 Alarm e-mail 81 7.13.1 Send alarm e-mail 81 7.13.2 Mail server IP address 81 7.13.3 Layout 82 7.
Dinion IP | en 7 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 11 Troubleshooting 101 12 Specifications 103 12.1 Dimensions (mm/inch) 105 12.
8 en | Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems Impor tant safety instructions Read, follow, and retain all of th e following safety instructions. Heed all warnings on the unit an d in the operating instructions before operating the unit.
Dinion IP | en 9 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 230 VAC, 50 Hz, the input and output power cord must comply with the latest versions of IEC Publication 227 or IEC Publication 245 . For outdoor use the power cord must comply to NEC400-4 (CEC Rule 4-010 ) and marked with OUTDOOR, W, or W-A.
10 en | Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems – unit exhibits a distinct change in performance; – unit does not operate norm ally when the user cor- rectly follows the operating instructions.
Dinion IP | en 11 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 DANGER! High risk: The lighting flash and arrowhead within the triangle is a warn- ing sign alerting you of "Dangero us Voltage" inside the product that can cause an electrical shock, bodily injury, or death.
12 en | Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems Video lo ss Video loss is inherent to d igital video record ing; therefore, Bosch Security Systems cannot be held liable for any damage that results from missing video information.
Dinion IP | en 13 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 FCC & ICES Information (U.S.A. and Canadian Models Only) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules .
14 en | Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems Bosch has a strong commitment towards the environment. This unit has been designed to resp ect the environment as much as possible. For additional information, plea se contact the Bosch Security Systems location nearest yo u or visit our web site at www.
Dinion IP Introduct ion | en 15 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 1 Introduction The Dinion IP camera is a high-performance smart surveillance color camera. It incorp orates advanced digital signal processing for outstanding picture performa nce.
16 en | Introduc tion Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 1.1 T ype number over view Ta b l e 1 . 1 Dinion IP type numbers 1.
Dinion IP Introduct ion | en 17 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 1.3 System requirements – Computer with Windows 2000/XP operating system, net- work access and Microsoft Internet Explorer web browser version 6.
18 en | Introduc tion Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems achieved quickly and easily. Video images from a single camera can be simultaneously received on seve ral receivers.
Dinion IP Introduct ion | en 19 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 1.4.7 Multicast In suitably configured networks , the multicast function enables simultaneous, real time transmissi on to multiple receivers. The prerequisite for this is that th e UDP and I GMP V2 protocols are implemented on the network.
20 en | Introduc tion Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 1.4.13 Intelligent Video Motion Detection The intelligent video motion de tection (iVMD) system of the camera uses advanced analysis algorithms with comprehensive functions for the detection of motion.
Dinion IP Connections | en 21 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 2 Connections 2.1 Po wer Fig. 2 .1 Pow er connection ! CAUTION! Installation should only be pe rformed by qualified service personnel in accordance with th e National Electrical Code or applicable local codes.
22 en | Connections Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 2. 2 Ne t wor k ( an d powe r ) Fig. 2.2 Network and power connection The multicolored LED under the Ethernet connection indicates Power (red), IP connection (green) and IP traffic (green flash- ing).
Dinion IP Connections | en 23 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 2.4 Alarm connector Fig. 2 .4 Network and po wer connect ion Alarm Pin 1 Pin 4 Pin Alarm socket 1G r o u n d 2 Alarm in 3 Relay out contac t 1 4 Relay ou t contact 2 - Max.
24 en | Mounting Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 3 Mounting 3.1 Lens mounting The camera accepts CS-mount lenses with a lens protrusion of up to 5mm. C-mount lenses can be mounted using the lens adapter ring. DC-iris lenses are recommended for th e best pic- ture performance.
Dinion IP Mounting | en 25 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 3.2 Mounting the camer a The camera can be mounted from the top or bottom. The bot- tom mounting is isolated from ground. With outdoor scenes, a DC-iris lens is recommended.
26 en | Quick set-up Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 4 Quick set-up The Dinion IP camera normally provides an optimal picture without the need for further adju stments. Configuration of the camera is carried out remotely via the network using a web browser.
Dinion IP Q uick set-up | en 27 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 4. Lock the back focus locking button. 4.2 Accessing and navi gating quick set-up menu Five keys, located behind the side panel, are used for navigating through the quick set-up menu.
28 en | Quick set-up Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems – Use the up or down keys to scroll up or down through a menu. – Use the left or right keys to move th rough options or to set parameters. – When in a menu, quickly pressing the menu/select key twice restores the selected item to its factory default.
Dinion IP Q uick set-up | en 29 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 4. Turn the back focus adjustment as required. 5. Lock the back focus locking button. 6. Exit the menu. 4.4 Adjustment procedure Manual-iris Lens 1. Unlock the back focus locking button.
30 en | Quick set-up Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems The new IP address, subnet ma sk an d gateway address are set after you leave the menu. The came ra reboots internally and the new values are set after a few seconds.
Dinion IP Network connection | en 31 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 5 Network connection A computer with Microsoft Internet Ex plorer can be used to receive live images from the camera, control cameras and replay sequences stored on the local hard drive.
32 en | Network conne ction Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems Password protection in camera If the camera is password-protected, a message to enter the password appears. 1. Enter the user name and th e associated password in the appropriate fields.
Dinion IP Network connection | en 33 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 5.3 Secured network If a Radius server is used fo r network access contro l (802.
34 en | Operation via the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 6 Operation via the brow ser 6.1 Liv epage After the connection is established, the Liv epage is initially dis- played. It shows the live video image on the right of the browser window.
Dinion IP Operation via the brow ser | en 35 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 6.1.2 Image selection You can view the image on a full screen. – Click one of the MPEG-4 Stream 1, MPEG-4 Stream 2 or M- JPEG tabs below the video im age to switch between the different displays for the camera image.
36 en | Operation via the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 1. Click the camera icon to save single images. 2. The image is saved at a resolution of 704 × 576/480 pixe ls (4CIF). The storage location depends on the configuration of the camera.
Dinion IP Operation via the brow ser | en 37 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 6. After a successful installation , two new icons for the Player and the Archive Player appear on the desktop. 7. Double click the Player icon to start the Player.
38 en | Operation via the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems . 6.2.1 Selecti ng recordings In the left section of the page, first select the partition whose recordings you want to view. All sequences that are saved in th e partitio n are displayed in the list.
Dinion IP Operation via the brow ser | en 39 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 means of click, the selected sequence is highlighted. The asso- ciated time interval is displayed in the bar in blue. A green arrow above the bar indicates the position of the image cur- rently being played back within the sequence.
40 en | Operation via the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems recording speed, left indicates re wind, and right fast forward. The fast forward or rewind sp eed changes, depending on how far you move the slide contro l toward the runner icons.
Dinion IP Configuration v ia the brow ser | en 41 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 7 Configuration via the brow ser 7.1 Settings When a connection is established, the Li ve p a g e is initial ly dis- played. Click Settings in the application title bar to configure the camera and the application interface.
42 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems You can view the current settings by opening one of the config- uration pages. 1. Click one of the menu options on the lef t of the window.
Dinion IP Configuration v ia the brow ser | en 43 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 Click the Settings link at the top of the window to close the window without saving the changes made. 7.2 Gener al Settings Various basic data for the camera can be set or selected here.
44 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 7.2.2 Password protection A camera is generally protected by a password to prevent unau- thorized access to the unit. Yo u can use various authorization levels (User name:) to limit access.
Dinion IP Configuration v ia the brow ser | en 45 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 7.2.3 Language selection Website language Select the language for the user interface here. 7.2.4 Date and time Date format Choose the desire d date format here (Europe: DD.
46 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 7.2.5 Tim e server The camera supports several netw ork time server proto cols and can synchronize its internal cloc ks with various ty pes of time servers.
Dinion IP Configuration v ia the brow ser | en 47 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 9. When you are finished, c lick OK to save and activate the table. Time server IP address Enter the IP address of a time server. Time server type Choose the protocol used by the selected time server.
48 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems Alarm mode stamping Choose On if a text message shou ld be overlaid in the event of an alarm. It can be displayed at a position of your choice using the Custom option.
Dinion IP Configuration v ia the brow ser | en 49 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 structures). To do this, the camera simultaneously generates two data streams (Dual Strea.
50 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems mation regarding data transmissi on are displayed and continu- ally updated above the previews. 1. Click a tab to select the associated stream.
Dinion IP Configuration v ia the brow ser | en 51 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 Profile name You can enter a new name for the profile here. The name is then displayed in the list of availabl e profiles in the Active encoder profile: field.
52 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems Default Click Defa ult to return the profile to the factory default values. Details Click Details to display further setti ngs for image quality and communication parameters.
Dinion IP Configuration v ia the brow ser | en 53 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 rate. A value of 31 results in a very high refresh rate and lower image quality. I-frame distance This parameter determines the number of inter-coded frames between two I-frames.
54 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems was stored on February 16, 2006 at 12.45 p.m. and 30 se c- onds. JPEG posting interval Enter the interval in seconds at which the images will be sent to an FTP server.
Dinion IP Configuration v ia the brow ser | en 55 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 7.5 Camera settings 7.5.1 ALC Video level Adjust the video output level (-15 to 0 to +15). Shutter – AES (auto-shutter) - the camera automatically sets the optimum shutter speed for manual iris lenses.
56 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems Gain When the Gain mode is On, the camera automatically sets the gain to the lowest possible va lue needed to maintain a good picture. NightSense™ Nightsense™ extends the low-light performanc e of the camera.
Dinion IP Configuration v ia the brow ser | en 57 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 7.5.3 Color White Balance – ATW : Auto tracking white balance allows the camera to constantly adjust for opti mal color reproduction. – AWB HOLD : Puts the ATW on hold and saves the color set- tings.
58 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 7.5.4 Installer options Select the synchronization method for the camera: Internal for free running camera operation; Lin e Lo c k to lock to the power supply frequency.
Dinion IP Configuration v ia the brow ser | en 59 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 7.6.1 Type Select the desired storage medi um to subsequently configure the recording parameters. 7.6.2 Storage information The status of the currently selected storage medium and the data throughput are displayed he re for information.
60 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 7.7 iSCSI settings If you select type iSCSI server as the storage medium, you then need to set up a conn ection to the desired iSCSI storage device and set the configuration parameters.
Dinion IP Configuration v ia the brow ser | en 61 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 7.7.2 iSCSI LUN map The LUN map displays the logi cal drives configured for the iSCSI storage device. The curren t user is displayed for each drive.
62 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 7.7.7 Initiator name The initiator name is automatica lly displayed after a connection has been established. 7.7.8 Initiat or extension Enter the initiator extension.
Dinion IP Configuration v ia the brow ser | en 63 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 7.8 Par titioning A partition can be set up for reco rdings of the c amera in a simi- lar manner to the partitioning often found on compute r hard drives.
64 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems . 2. Read the information text in the upper section of the win- dow. 3. Click in the text fields to enter values or use the othe r con- trols that are available, such as buttons, checkboxes or list fields.
Dinion IP Configuration v ia the brow ser | en 65 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 2. Click Finish to complete the config uration. All settings are now transferred to the unit and subsequently become effective. 7.8.2 Partition status 1.
66 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 1. Click Edit partition . – A new window with the en tries for the selected parti- tion is opened. You can modify the configuration in the Partition properties window.
Dinion IP Configuration v ia the brow ser | en 67 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 The unit uses a special recording mode during alarm recording for optimal usage of storage capaci ty.
68 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 7.8.4 Deleting partitions You can delete a partition at any time.
Dinion IP Configuration v ia the brow ser | en 69 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 1. Click one of the tabs to edit the corresponding profile. 2. Click Default to return all settings to their defaults. 3. Click Copy settings if you want to copy the currently visi- ble settings to another profile.
70 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems Alarm track recording This parameter is only active, if the alarm tracks have been con- figured. – Click the checkbox to activa te alarm track recording.
Dinion IP Configuration v ia the brow ser | en 71 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 7.10 Recording scheduler Set all parameters for recording.
72 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 5. Click Clear all to deselect all of the intervals. 6. When you are finished, click Set to save the settings in the device. Holidays You can define holidays, which wi ll override the settings for the normal weekly schedule.
Dinion IP Configuration v ia the brow ser | en 73 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 2. Click Stop to deactivate the reco rding schedule. Record- ings that are currently running are interrupte d and the con- figuration can be modified.
74 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 7.11.2 Alarm connections You can select the res ponse of the camer a when an alarm occurs.
Dinion IP Configuration v ia the brow ser | en 75 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 example when connections are init iated by a controlling system such as VIDOS or BVMS. The camera connects to all devices protected by the same general password.
76 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 7.12 VC A The camera contains an inte grated Video Content Analysis (VCA), which can detect and an alyze changes in the signal. Such changes can be due to movements in the camera's field of view.
Dinion IP Configuration v ia the brow ser | en 77 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 7.12.2 Analysis type Select the required analysis algorithm. By default, only Motion+ is available – this offers a moti on detector and essential recog- nition of tampering.
78 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 7.12.4 Sensitivity Sensitivity is available for the Motion+ analysis type. The basic sensitivity of the motion detector can be adjusted for the envi- ronmental conditions to which the camera is subject.
Dinion IP Configuration v ia the brow ser | en 79 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 4. If necessary, click Select all to select the entire video frame for monitoring. 5. Right-click any fields you wish to deactivate. 6. Click OK to save the configuration.
80 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems objective) should trigger an al arm. The average brigh tness of the scene provides a ba sis for recognition.
Dinion IP Configuration v ia the brow ser | en 81 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 1. Click Select are a to configure th e sensor fi elds. A n ew win- dow will open. 2. If necessary, click Clear all first to clear the current selec- tion (fields marked red ).
82 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems sent to the mail server via the address you en tered. Otherwise leave the box blank (0.0.0.0). 7.13.3 Layout You can select the data fo rmat of the alarm message.
Dinion IP Configuration v ia the brow ser | en 83 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 7.14.1 Alarm out Select the event that will trigger the alarm output; – an internal motion detection/VCA, – an internal day/night switching, or – an external trigger from the network.
84 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 7.15 Ser vice Settings 7.15.1 Network The settings on this page are used to integrate the unit into an existing network. – Click Set after entering a new IP address.
Dinion IP Configuration v ia the brow ser | en 85 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 restarted it can only be accessed at the new IP address. IP address Enter the desired IP address for the camera in this field. The IP address must be valid for the network.
86 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems If you want to limit connections to SS L encryption, you must set the Off option in the HTTP browser port, the RC P+ port, and Telnet support.
Dinion IP Configuration v ia the brow ser | en 87 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 nents and can send SNMP messages (traps) to IP addresses. It supports SNMP MIB II in the unified code. If you wish to send SNMP traps, enter the IP addresse s of one or two required tar- get devices here.
88 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems to receive the video signal from an encoder simultaneously.
Dinion IP Configuration v ia the brow ser | en 89 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 Port If there are simultaneous data streams at the same multicast address, you must assign differ ent ports to each data stream. Enter the port address for the relevant stream here.
90 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 5. Click Genera te keys to generate new keys for marked streams.
Dinion IP Configuration v ia the brow ser | en 91 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 7.15.5 Livepage configuration In this window, you can adapt the appearance of the Liv epage to meet your requirements. Opti ons are provided here to dis- play various information and oper ating elements in addi tion to the video image.
92 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems Logo URL Enter the path to a suitable back ground graphic in this field. The image can be stored on a local computer, a local network or at an Internet address.
Dinion IP Configuration v ia the brow ser | en 93 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 Show system log The system messages are displayed with the date and time in a field next to the video image and provide information about the establishment and terminati on of connections etc.
94 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 7.15.7 Maintenance Firmware update The camera functions and para meters can be updated with firmware. To do this, the current firmware package is trans- ferred to the unit via the network.
Dinion IP Configuration v ia the brow ser | en 95 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 To update the firmware: 1. First, save the update file to the hard disk. 2. Enter the full path for the upd ate file in the field or click Brow se.
96 en | Configuration v ia the brow ser Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems Configuration upload 1. Enter the full path of the file to upload or click Br owse... to select the desired file. 2. Make certain that the file to be loaded comes from the same device type as the unit you want to reconfigure.
Dinion IP Connections betwee n video ser vers | en 97 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 8 Connections between video ser vers A camera can be used as a tr ansmitter and a compatible MPEG4 hardware decoder with a connected monitor as a receiver using an Ethernet network connection.
98 en | Connections betw een video ser vers Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 8.0.4 Connecting with a Web browser Various requirements must be met in order to operate using a Web program. 1. Use the Web browser to connect to the receiver.
Dinion IP Operation with decoder software | en 99 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 9 Operation with decoder sof tware VIDOS The camera video server and VIDOS software combine to pro- vide a high-performance system solution.
100 en | Maintenance Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 10 Maintenance 10.1 T esting the network connection The ping command can be used to check the connection between two IP addresses. This allows you to test whether a device is active in the network.
Dinion IP T roubleshooting | en 101 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 11 T roubleshoo ting If you cannot resolve a fault, please contact your supplier or system integrator or go direct to Bosch Security Systems Cus- tomer Service.
102 en | T r oubleshooting Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems The unit does not report an alarm. Alarm source is not selected. Select possible alarm sources on the Alarm sources configuration page. No alarm response speci- fied.
Dinion IP Specifications | en 103 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 12 Specifications Type number NWC-0495-10P NWC-0495-2 0P Standard PAL NTSC Active pixels 752x582 768x492 Rated supply voltage 24 VAC or 12 VDC or Power-over-Ethernet (IEEE 802.
104 en | Specificatio ns Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems Image resolutions (PAL/NTSC) 704 × 576/480 pixels (D1/4CIF) 464 × 576/480 pixels (2/3 D1) 704 × 288/.
Dinion IP Specifications | en 105 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 12.1 Dimensions (mm/inch) (2.323") 59 ( 1 .339") 34 (3.346") 85 (4.646") 118 (4.843") 12 3 ( 1 .889") 48 (2.638") 67 Dimensions in mm (inches).
106 en | Specificatio ns Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems 12.2 Accessories 12.2.1 Recommended lenses LTC 3764/20 Varifocal Lens – 1/2-inch, 4 -12 mm, DC-iris, C-mount, F/1.2-360, 4 pin LTC 3774/30 Varifocal Lens – 1/2-inch, 10 - 40 mm, DC-iris, C-mount, F/1.
Dinion IP Glossar y | en 107 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 13 Glossar y Brief explanations of some of the terms and abbreviations found in this user guide are given below. 10/100 Base-T IEEE 802.3 specification for 10 or 100 MBit/s Ethernet 802.
108 en | Glossar y Dinion IP V 2.5 | 2007.6 Operating Instructions Bosch Security Syst ems IP See Internet Protocol IP address A 4-byte number uniquely defining each device on the Inter - net. It is usually written in dotted decim al notation with full stops separating the bytes, for example "209.
Dinion IP Glossar y | en 109 Bosch Security Systems Operating Instructions V 2.5 | 2007.6 RS232/RS422/RS485 Standards for serial data transmission RTP Realtime Transport Protoc ol; A transmission protocol for real-time video and audio SNTP Simple Network T ime Protocol is a simplified version of NTP (see NTP).
Bosch Security Systems Robert-Koch-Straße 100 D-85521 Ottobrunn Germany Telefon 089 6290-0 Fax 089 6290-1020 www.boschsecuritysystems.com © Bosch Security Systems, 2007.
デバイスBosch Power Tools NWC45510Pの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Bosch Power Tools NWC45510Pをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBosch Power Tools NWC45510Pの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Bosch Power Tools NWC45510Pの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Bosch Power Tools NWC45510Pで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Bosch Power Tools NWC45510Pを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBosch Power Tools NWC45510Pの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Bosch Power Tools NWC45510Pに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBosch Power Tools NWC45510Pデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。