Boss Audio SystemsメーカーBV7330の使用説明書/サービス説明書
ページ先へ移動 of 27
.
BV7330 OWNER’S MANUAL M o b i l e A u d i o / V i d e o S y s t e m y 3.2" TFT Monitor y DVD Player with Radio y Fold down det achable Panel y Memory Card Interface y USB Interface y AUX IN int.
CONTENTS SAFETY INFORMA TION ................................................................... 3 DISC NOTES ..................................................................................... 5 INST ALLA TION.......................................
Features Comp atible with P AL DVD (V ideo CD) and NTSC DVD (Video CD) This player can play discs recorded in either P AL or NTSC format. z L/R stereo analog audio outputs for connection to existing head unit aux inputs. V ideo output is composite video.
SAFETY INFORMA TION CAUTION: MOBILE DVD PLA YER IS A CLASS I LASER PRODUCT . HOWEVER THIS MOBILE DVD PLA YER USES A VISIBLE/INVISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIA TION EXPOSURE IF DIRECTED. BE SURE T O OPERA TE THE MOBILE DVD PLA YER CORRECTL Y A S INSTRUCTED.
DISC NOTES Handling and Cleaning y Dirt, dust, scratches and warping discs will cause wrong operation. y Do not place stickers or make scratches on discs. y Do not warp discs. y A disc should always be kept in its case when not in use to prevent from damage.
6 INST ALLA TION Notes: y Choose the mounting location where the unit will not in terfere with the normal driving function of the driver . y Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly .
7 INST ALLA TION they will go (with the notches facing up) into the appropriate slots at the middle left and right sides of the unit. Then slide the sleeve off the back of the uni t. (1) Front Panel; (2) Outer T rim Ring; (3) Sleeve; (4) L key; (5) R key .
8 INST ALLA TION 3. Press the release button to remove the front panel. 4. Lif t the top of the outer trim ring then pull it out to remove it. 5. Insert both of the supplied keys into the slots at the middle lef t and right sides of the unit, then pull the unit out of the dashboard.
9 T o Det ach the Front Panel 1. Press the release ( ) button, then the front panel will be folded down. OPEN 2. T o remove the front panel, lift it up at a little angle from horiz ontal position, then first pull out the right side and then pull out the left side.
CONNECTIONS 10.
LOCA TIONS AND FUNCTION OF THE PLA YER When the front panel is folded down: 1. (Release button) 2. V olume knob (when rotated) Push SEL (when pressed) 3. EQ 4. 3.2” TFT display 5. 1 6. 2 7. 3 OSD 8. 4 RPT 9. 5 RDM 10. 6 SUB-T 11 . /MUT 12. BAND/AMS 13.
LOCA TIONS AND FUNCTION OF THE REMOTE CONTROL 12.
1. Press it to turn on the unit. When the unit is on, press it to tu rn the unit off. 2. MODE When the unit is on, press it to select the different mode, su ch as RADIO, DVD, USB, SD, AUX IN mode. 3. BAND/SYS In radio mode, press it shortly to select the desired ban d, such as FM1, FM2, FM3, AM1 and AM2.
21. ZOOM Press to allow the picture to be increased in size. 22. SELECT Press to enter in to the system setup menu. 23. SEEK- / SEEK+ Press shortly to skip to the previous/next track. Press and hold it to activate fast reverse/forward function. In radio mode, press it shortly to search the frequency backward/forward manually .
OPERA TION BASIC OPERA TION ◆ T urn the unit on/off When all the connection is finished, press MUT button on the front panel or on the remote control will turn the unit on.
OPERA TION displayed on the screen. Pressing MUT button on the front panel or MUTE button on the remote control will mute the sound. Press it again will resume the sound. ◆ Mode selection Press MODE button on the front panel or MODE on the remote control to select the desired mode to enjoy .
OPERA TION ◆ Pausing play Shortly press on the front panel or on the remote control during playback to stop playback temporarily . Shortly press again will return to the normal playback. ◆ Rapid forw ard / rapid reverse Hold press / on the front panel or hold press / on the remote control during playback.
OPERA TION Note: The language is dif ferent according to the disc. Some discs only contain one subtitle language. ◆ Multi-angle function (For DVD) Press ANGLE button on the remote control during playback. The corresponding information will be shown on the screen.
OPERA TION the unit will play the tracks you programmed. d) If you want to clear the program, select CLEAR on the screen and press ENTER on the remote control to confirm, and the unit will cancel the programmed play . For DVD disc: The operation is the same as VCD/CD operation.
OPERA TION * TV SYSTEM: Change the TV SYSTEM among NTSC, P AL and AUT O. * AUTO PLA Y : Change between ON and OFF . When AUTO PLA Y ON, the unit will skip over the DVD menu to play automatically . * VIDEO: Change among S-VIDEO INTERLACE-YUV , TV - RGB, P-SCAN YPBPR and PC-VGA.
OPERA TION 6) DIGIT AL SETUP When you open the DIGIT AL menu, you will see the following picture: * OP MODE: to set the operating modes for Dolby Digital decoder , there are LINE OUT and RF REMOD to be selected. * DYNAMIC RANGE: you can adjust the dynam ic range between OFF , 1/8, 2/8.
OPERA TION the files in the USB driver and start to play automatically . If in other mode, you can also press MODE button to select USB mode. When playing the audi o/video/photo files in the device, the operation is the same with DVD operation described above.
OPERA TION 1) S tore in Memory Press and hold desired radio preset buttons (numeric buttons 1~6) on the remote control or on the front panel for several seconds, the memory icon will be shown display and the current listening station will be stored into the number button.
TROUBLE SHOOTING If it appears that your DVD unit is faulty , first consult this checklist. It may be that something simple has been overlooked. Under no circumst ances should you try to rep air the player yourself, as this will invalidate the warranty .
TROUBLE SHOOTING The sound/picture skip s on a DVD/VCD/CD/MP3. ¾ The disc is scratched or dirty . Clean the disc. A track w ill not play . ¾ Random play has been selected. T urn off random play . A VCD cannot be played using menus. ¾ The VCD disc being played is not compatible with PBC.
SPECIFICA TIONS GENERAL Power Supply Requirements : DC 12 V olts, Negative Ground M a x i m u m O u t p u t P o w e r : 4 x 8 0 w a t t s C u r r e n t D r a i n : 15 Ampere (max.
デバイスBoss Audio Systems BV7330の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Boss Audio Systems BV7330をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBoss Audio Systems BV7330の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Boss Audio Systems BV7330の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Boss Audio Systems BV7330で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Boss Audio Systems BV7330を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBoss Audio Systems BV7330の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Boss Audio Systems BV7330に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBoss Audio Systems BV7330デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。