BowflexメーカーRevolutionXP 001-7057の使用説明書/サービス説明書
ページ先へ移動 of 32
T he Bow fle x Revol u tion ® XP Home G y m A ssembly Ins tr uctions P/N: 001-7057 Rev $ ( /0 ).
2 Before You Start ....................................... 2 Tools You Will Need / Hardware Contents .... 3 Box Contents ............................................ 6 Assembling Your Bowflex Revolution ..........10 Important Contact Numbers .........
3 These Tools Are Not Provided in the Box Phillips Head Screwdriver 3/4” and 9/16” Wrenches or Adjustable Wrenches * Tool and Hardware specifications subject to change without notice.
4 4 2 6 5 3 2 1 8 6 9 11 10 12 7 2 3 Only two needed for XP model. Use 4 for FT model. Hardware Hardware Card (Box 3) ITEM NO. QTY. DESCRIPTION 1 6 BUTTON HEAD CAP SCREW 3/8”x 2 3/4” 2 16 NARROW W.
5 4 1 5 2 7 3 6 9 8 Hardware Hardware Card (Box 4) ITEM NO. QTY. DESCRIPTION 1 6 BUTTON HEAD CAP SCREW 3/8”x 4” 2 8 NARROW WASHER 5/16” 3 18 NARROW WASHER 3/8” 4 6 NYLOCK NUT 3/8” 5 8 BUTTON.
6 6 Box Contents 4 5 6 2 2 3 1 Box 1 Contents ITEM QTY. DESCRIPTION 1 1 PRE STRETCH HARDWARE PACK 2 4 20LB PACK ASSEMBLY 3 2 40LB PACK ASSEMBLY 4 2 PRE-STRETCH PACK ASSEMBLY 5 2 5LB PACK ASSEMBLY 6 2 .
7 7 Box Contents 8 9 10 7 BOX 2 ITEM NO. QTY. DESCRIPTION 7 1 REVOLUTION MAIN UNIT 8 1 BOX HARDWARE CARD 9 2 FOOT CAP 10 1 REAR STABILIZER Box 2 Contents.
8 Box Contents BOX 3 21 18 14 19 13 15 11 17 16 12 20 ITEM NO. QTY. DESCRIPTION 11 1 SHAFT 12 1 BOWFLEX HANDLE KIT 13 1 PLATFORM 14 1 LEFT STABILIZER 15 1 RIGHT STABILIZER 16 4 PULLEY 17 1 SQUAT HARNE.
9 24 30 32 23 22 26 25 27 28 29 31 33 34 35 ITEM NO. QTY. DESCRIPTION 22 1 SEAT TUBE 23 1 LOWER SEAT CONNECTOR 24 1 HARDWARE CARD BOX 4 25 1 LEG EXT ASSEMBLY 26 4 FOAM ROLLER PAD 27 2 ROLLER TUBE 28 1.
10 Assembly (Unboxing) Warning: The Bowflex Revolution ® XP Home Gym is very heavy. Whenever possible use two people to unbox the main unit. We have designed the packaging to make unboxing the main unit as safe and easy as possible.
11 Step 3 Assemble Rear Stabilizer Parts: • Rear Stabilizer ( Box 2 ) • Rubber Pads ( Box 3 hardware card ) • Transport Wheels ( Box 3 ) Tools: • 7/32” Allen Wrench 3-1 Insert Transport Wheels into Rear Stabilizer making sure that the holes in the Stabilizer and the plates on the Transport Wheels are pointing up.
12 Step 4 Install Rear Stabilizer Parts: • Rear Stabilizer (From Step 3) Tools: • 5/16” Allen Wrench • 7/32” Allen Wrench • 3/4” Wrench or Adjustable Wrench 4-1 Place the Rear Stabilizer in the bracket on the Main Frame with the wheels pointing away from the frame.
13 Step 5 Install Stabilizers and Lower Lat Connector Parts: • Right and Left Stabilizer ( Box 3 ) • Lower Seat Connector ( Box 4 ) Tools: • 5/16” Allen Wrench • 3/4” Wrench or Adjustable Wrench 5-1 Insert Lower Seat Connector into the Main Frame with the threaded hole on the flat side pointing down as shown.
14 Step 6 Parts: • Platform ( Box 3 ) • Foot Caps ( Box 2 ) Tools: • 7/32” Allen Wrench • 9/16” Wrench or Adjustable Wrench 6-1 Align Platform with Stabilizers making sure the rubber pads are pointing downward. 6-2 Install DO NOT TIGHTEN the hardware.
15 Step 8 8-1 Lift the box up and off of the styrofoam packing. 8-2 Separate the styrofoam packing. Remove plastic wrapping from the engine. Lift box Styrofoam packing Separate styrofoam packing Step 9 Tools: • 5/16” Allen Wrench 9-1 Install one 1/2”x3/4” Allen Bolt .
16 Top Cover Remove screws Step 10 Remove Top Cover Tools: • 1/8” Allen wrench 10-1 Use a 1/8” Allen Wrench to remove the four screws in the Top Cover, then remove the Top Cover and set it aside.
17 Step 12 Install Tension Shaft Parts: • Main Unit • Shaft ( Box 3 ) 12-1 Align the rounded side of the Tension Shaft with the rounded side of the hole in the Main Unit and slowly slide the Shaft through until it clicks into place.
18 Step 13 Tighten Tension Shaft Holder Tools: • 7/32” Allen Wrench 13-1 Use a 7/32” Allen Wrench to tighten the Tension Shaft Holder by tightening the screws in numerical order shown on the tensioner. Tighten the two screws marked 1, then the two marked 2, etc.
19 Side view of pre-tension SpiraFlex pack Hooks toward main unit Pre-tension SpiraFlex ® Pack Step 15 Remove Cam Holders. Tools: • Phillips Head Screwdriver 15-1 Use a Phillips Head Screwdriver to remove the Cam Holders. Note: The Cam Holders are only needed when the Spiraflex ® packs are not installed and may be discarded or recycled.
20 Step 16 Replace Top Cover Parts: • Top Cover Tools: • 1/8” Allen Wrench 16-1 If the screws are still in the Top Cover from Step 1, remove them to avoid dropping them into the Main Unit. 16-2 Replace the Top Cover front end first . Make sure inside edge of the Shroud fits into the slots in the Top Cover.
21 Hardware (1:1): Step 17 Install Seat Support Plates Parts: • Right and Left Lat Support Plate ( Box 4 ) Tools: • 7/32” Allen Wrench 17-1 Orient the Lat Support Plates so the hooks on the plates are on the outside and align the Left and Right Lat Support Plates with the holes on the Main unit.
22 Step 18 Install Seat Tube Parts: • Seat Tube ( Box 4 ) Tools: • 7/32” Allen Wrench 18-1 Align the Seat Tube with the holes in the Seat Support Plates and the Lower Seat Connector . 18-2 Install and completely tighten the hardware from step 17 and 18.
23 Assembly Step 20 Install Cable Hooks Parts: • Rope Hooks ( Box 3 Hardware Card ) Tools: • 5/16” Allen Wrench 20-1 Align the Hooks with the holes in the Main Frame with the tabs on the hooks inserted into the slots in the Main Frame. 20-2 Install and completely tighten the hardware.
24 Assembly Step 21 Install Pulleys Parts: • Pulley Components ( Box 3 ) Tools: • Screwdriver NOTE: Remove and discard the hex nut to disassemble the Pulley components. 2 1-1 Place a Spring Cap over a threaded hole in a Stabilizer and screw the Hook Bolt into the hole ONLY about three turns.
25 Step 22 Install Back Pad Parts: • Back Pad ( Box 4 ) • Back Pad Bracket ( Box 4 ) Tools: • 3/16” Allen Wrench 22-1 Align the Back Pad with the lower 4 holes in the Back Pad Bracket. The upper holes are not used with this pad. 22-2 Install and completely tighten the hardware.
26 Attach the Seat and Back Pad to the Main unit by placing the Upper Hooks onto the respective Upper Post and rotating the Lower Hook into position. Once the Seat Pad is in postion, insert the Locking Pin through the hole behind the Lower Hook to secure the pad to the Seat Tube.
27 Assembly Step 24 Assemble Leg Extension Parts: • Foam Roller Pads Pad ( Box 4 ) • Roller Tubes ( Box 4 ) • Leg Extension Assembly ( Box 4 ) • End Caps ( Box 4 Hardware Card ) • Leg Extension Pin ( Box 4 Hardware Card ) 24-1 Slide the Roller Tubes through the holes in the Leg Extension Assembly followed by the Roller Pads and End Caps.
28 Assembly Step 25 Install Cables Parts: • Ropes ( Box 3 ) 25-1 Remove the Ball End from the cable by pressing the insert out of the ball (Figure A) and slide the ball off of the cable. 25-2 Route the cable under the Pulley closest to the Main Unit and reinstall the Ball End (Figure B).
29 Step 26 Apply Revolution XP Decal Parts: • Revolution ® XP Decal ( Box 4 Documentation Kit ) 26-1 Apply the Decal to the Platform in the indented area as shown.
30 Step 27 Final Inspe c tion Please inspec t you r machi ne to ensu re that al l fastener s are tig ht and components are properly assembled. Review all w arni ngs af f ixed to m achine.
31 I mportant Contact Numbe rs OFFICES IN THE UNITED STATES: E-mail: customerservice@nautilus.com • TECHNICAL/CUSTOMER SERVICE Nautilus, Inc. World Headquarters 16400 SE Nautilus Drive Vancouver, Washington, USA 98683 Phone: 800-NAUTILUS (800-628-8458) Email: customerservice@nautilus.
©200 Nautilus Inc. All rights reserved. 16400 S.E. Nautilus Drive, Vancouver, Washington, USA 98683. Bowflex, Bowflex Revolution, and the Bowflex and Nautilus logos are either registered trademarks or trademarks of Nautilus, Inc. All other trademarks are owned by their respective companies.
デバイスBowflex RevolutionXP 001-7057の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Bowflex RevolutionXP 001-7057をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBowflex RevolutionXP 001-7057の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Bowflex RevolutionXP 001-7057の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Bowflex RevolutionXP 001-7057で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Bowflex RevolutionXP 001-7057を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBowflex RevolutionXP 001-7057の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Bowflex RevolutionXP 001-7057に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBowflex RevolutionXP 001-7057デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
