BrickcomメーカーFD-132NPの使用説明書/サービス説明書
ページ先へ移動 of 32
Hardware Use r ’ s Manua l Megapixel Day & Night Fixed Dome Network Camera Quality Service Grou p Fixed Dome Serie s.
Review Histor y: 1. Sep arate User Manual into HW and SW . 2. Merge FD-300Ap/ FD- 130N / FD -132N/ F D-300 A / FD-302A/ FD-500A/ FD -502A series into this User Manual. Product name: Network Camera (Fixed Dome se ries) Release Date: 201 3/01 Manual Revi sion: V3 .
T able of Conten t s Before Y ou Use This Product ....................................................................................... 1 Regulatory Information ........................................................................................
1 Before Y ou Use This Pr oduct In many countries, there are laws prohibiting or restricting the use of surveillance devices. This Network Camera is a high -performance, web-rea dy came ra which can be part of a flexible surveillance system.
2 Regulatory Informati on Federal Commu nication Commission I nterference State ment This equipment has been tested and fo und to comply with the limits for a Class B digital device, p ursuant to Part 15 of the FCC Rules. These limits a re designed to provide reasonable protection ag ainst harmful interference in a residenti al installation.
3 Chapter 1 - Package Content s a. Netw ork Camera (Fixed Dome series) b. T erminal Block c. P roduct CD d. Location Sticker e. Warranty Card f. Screw Bag g.
4 Chapter 2 - Fixed Dome Networ k Camera Overview The FIXED DOME SERIES is a full-fe atured, 3-axis, f ixed-dome, n etwork camera. W ith a megapixel progressive sensor and b uilt -in IR-cut f ilter/ IR illuminator LEDs/ Auto Light se nsor , it can provide 24 -hour , indoor su rveillance.
5 Chapter 3 - Device Appearan ce Description 1. Below “ Dev ice A ppearance Description ” is for FD-130Np/ FD -1 32Np/ FD -300A p V3/ FD -302Ap/ FD -500Ap/ FD -502A 2.
6 3. Below “ Device A ppearance Description ” is for FD-501Af-series NOTE 1. SD Card Cap a city (*) - The netw ork camera i s comp atible with SD /SDHC (Maximum 32GB) cards. 2. (*) These are o ptional features. Please refer to the Product List for the full list of optional features available for the product.
7 Chapter 4 - LED Behavior Function LED Behavior Description Power LED Continuous illumination (Green) Power on Power LED Unit Power off Link LED Continuous illumination (Red) Link Link LED Blinking (.
8 < Hardware Reset > The Reset Button can be used to reboot the camera o r restore it to factory d efault settings. If the camera experiences a problem, rebooting the camera may correct the problem. If the prob lem remains, please restore the camera to f actory default settings and reinstall the sof tware.
9 Chapter 5 - Inst allation 5.1 Hardw are Inst allation A. Remov e the dome cover from the camera device l. PoE, Power , DIDO, A udio Connection 1) Insert the PoE(1) / DC1 2V(2), DIDO and Audio cabl e(3) through con duit hole A o r B.
10 a. PoE, Power , DIDO, A udio Connection ii. Connect the PoE (1)/ DC 12V (2), DIDO and A udio (3) Cables to their respective terminals. See the next p age for more de tails reg arding the DIDO and Audio connection. 1) Power over Ethernet (PoE) Connection 2) Power A dapter Connection Please refer to the definition of the terminal blocks below .
11 ll. For SD/ SDHC card (*) installation: NOTE – The SD/SDHC card is not included in the product p ackage and needs to be purchased sep arately . B. For wall inst allation: 1) Chose the location on the wall to place the camera. Attach the location sticker to the desired spot.
12 4) Mount the camera on the wall and position to tw o screw slots over the plastic anchors. Insert the screams into the holes and use the screwdriver to tighten the screws clockwise until they are secure. 5) Place the dome cover back on the camera dev ice.
13 C. For ceiling install ation: The user needs the two screws which are in cluded in the product package and a screw driver . Moun t the c amera on th e desired location a nd use the screwdriver to tighten the screws clockwise through the two holes on each side of the device as shown below .
14 ii. Release the tilt screw on both side of the device and then rota te the lens to up or down. After completion, tighten the tilt screw. iii. Release the video adjustment screw a nd then adjust the lens direction. After completion, tighten the video adjustment screw.
15 b. How to adjust the view angle and focus range i. Release the view angle controller and then mo ving the controller bar left or right to adjust th e v iew a ngle. Af ter complet ion, tighten the view angle controller. ii. Release th e focus controller and then moving the controller bar left or right to adjust the focus ran ge.
16 5.2 Camera Connection F. Basic Connection (Withou t PoE) a. Connect the power adaptor to the camera device. b. Connect the camera to the Ethernet hub using a RJ45 Ethernet cable. G. Power over Ethernet (PoE) Connection a. Connect the camera to a PoE-enabled hub via single Ethernet cable.
17 5.3 System Requirement s Operating System: Microsoft W indow s XP Home Edition SP2 Microsoft W indow s XP Professional SP2 Computer: IBM PC/A T C ompatible CPU: Pentium 3GHz or faster Memory: 1024 .
18 5.4 Sof t w are Inst allation In this manual, " User" refe rs to whoever has access to the Network Camera, and "Administrator" refers to the person w ho can co nfigure the camera and grant user access to the camera.
19 B. In the Inst all Shield W iz ard dialog box, click <Next> to continue. C. Read the End- User License Agreement and che ck the option “I accept the terms of the license agreement”.
20 D. Click <Change> to change the a ppointed folder w here inst allation and program files will be stored. Click <Next> to continue. E. Select to create shortcuts.
21 F. Select the application and click <Finish> . W hen launching the PC-NVR program, please refer to the PC-NVR user manual..
22 5.3.1 Eas y Config T o launch EasyConfig, select EasyConfig from the start menu. If Comp lete Setup type w as use d in the softw are installation, an EasyConfig icon was installed on the desktop.
23.
24 B. Select e ither “S imple M ode ” or “P rofessional M ode ” to o btain the camera’ s IP settings. If “S imple M ode ” is selected, EasyConfig will set u p the connection automatically . I f “P rofessional Mode ” is selected, the user will need to configure the IP settings manually .
25 C. There may be many cameras in the local network. Dif ferentiate the cameras using their UPnP name. Double click on the camera from the survey list to connect.
26 If <Set IP Address configuration manually> is selected, the following pages will be displayed..
27 E. If the camera support s the EasyLinkTM function , the following p age will be displayed. Ot herwise, this page w ill not be shown. *If desired, click <Skip> to skip this setting. EasyLinkTM is a unique Brickcom function which allo ws users to assign a unique EasyLink name to their network camera’s IP address.
28 F. W hen the IP address sett ings have been configured , the screen will eithe r display a successful or fa iled connection message. If the connection failed, either try again or quit the installation. a. If “ DHCP IP address settings” was selected, the failure page will be displayed as below: b.
29 c. If the connection was successful, the user will see the message: “Congratulations. The installation of the camera is complete.” W hen this window is displa yed, click <PC-NVR> to start.
デバイスBrickcom FD-132NPの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Brickcom FD-132NPをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBrickcom FD-132NPの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Brickcom FD-132NPの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Brickcom FD-132NPで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Brickcom FD-132NPを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBrickcom FD-132NPの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Brickcom FD-132NPに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBrickcom FD-132NPデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。