BrinkmannメーカーSl 7の使用説明書/サービス説明書
ページ先へ移動 of 12
R 140-6007-0 2/96 MODEL SL-7 OWNER’S MANUAL ASSEMBL Y AND OPERA TING INSTRUCTIONS INSTR-SM SL-7.q 4/22/02 11:29 AM Page 1.
1 The Home Security Motion Activated Lighting System is designed to turn on automatically at night when a person enters the detection zone. The light will stay on as long as the motion detector senses motion in the zone. The light will turn off in approximately 90 sec- onds after the person leaves the detection zone or stops moving.
2 ASSEMBL Y INSTRUCTIONS Inspect contents of the box to ensure all parts are included and undamaged. A Phillips screwdriver will be required. 1 P ARTS LIST : Home Security Main Housing Main Housing Mo.
3 8 Step 3 Slide the two slots in the back of main housing onto the screws. Step 4 Select a location within 15 feet from the main housing to mount the solar panel module. The solar panel module must be mounted where it will receive full, direct sunlight for several hours each day .
4 7 Step 8 Point the two floodlights in the desired direction. Y ou may want to adjust the floodlights after letting the unit operate for a few nights. Step 9 Position the detector head in the direction you want to cover . Never aim the motion detector head directly at the sun or above a 90° angle (horizon- tal level).
T erminal Wire Connector Changing Batteries 1. Unscrew the four screws in front housing and separate it from rear housing. 2. Carefully peel the tape off the battery , leaving wires attached to tape. 3. Remove the battery from rear housing, being careful not to pull on wires.
T erminal Wire Connector Changing Batteries 1. Unscrew the four screws in front housing and separate it from rear housing. 2. Carefully peel the tape off the battery , leaving wires attached to tape. 3. Remove the battery from rear housing, being careful not to pull on wires.
4 7 Step 8 Point the two floodlights in the desired direction. Y ou may want to adjust the floodlights after letting the unit operate for a few nights. Step 9 Position the detector head in the direction you want to cover . Never aim the motion detector head directly at the sun or above a 90° angle (horizon- tal level).
3 8 Step 3 Slide the two slots in the back of main housing onto the screws. Step 4 Select a location within 15 feet from the main housing to mount the solar panel module. The solar panel module must be mounted where it will receive full, direct sunlight for several hours each day .
1 The Home Security Motion Activated Lighting System is designed to turn on automatically at night when a person enters the detection zone. The light will stay on as long as the motion detector senses motion in the zone. The light will turn off in approximately 90 sec- onds after the person leaves the detection zone or stops moving.
R 140-6007-0 2/96 MODEL SL-7 OWNER’S MANUAL ASSEMBL Y AND OPERA TING INSTRUCTIONS INSTR-SM SL-7.q 4/22/02 11:29 AM Page 1.
2 ASSEMBL Y INSTRUCTIONS Inspect contents of the box to ensure all parts are included and undamaged. A Phillips screwdriver will be required. 1 P ARTS LIST : Home Security Main Housing Main Housing Mo.
デバイスBrinkmann Sl 7の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Brinkmann Sl 7をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBrinkmann Sl 7の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Brinkmann Sl 7の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Brinkmann Sl 7で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Brinkmann Sl 7を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBrinkmann Sl 7の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Brinkmann Sl 7に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBrinkmann Sl 7デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。