3ComメーカーOfficeConnect 3C891Aの使用説明書/サービス説明書
ページ先へ移動 of 24
Part No. 1-024-2301 Published October 1999 O FFICE C ONNECT ISDN LAN M ODEM R ELEASE N OTE V. 6.2.0 (ST) AND 5.3.0 (U) Int r oduction This r elease note describes the following enhancements made to the O f ficeConnect ISDN LAN Modem as part of the latest firmwa r e r eleases.
2 O FFICE C ONNECT ISDN LAN M ODEM R ELEASE N OTE V. 6.2.0 (ST) AND 5.3.0 (U) Single User Router (such as a LAN Modem) running NAT calls into a LAN Modem.
Configuring Dial-In 3 Configuring Dial-In There ar e three main steps for configuring dial-in support. 1 Change remote administration passwor d 2 Create dial-in user pr ofile on server or central s.
4 O FFICE C ONNECT ISDN LAN M ODEM R ELEASE N OTE V. 6.2.0 (ST) AND 5.3.0 (U) Configuring the Server LAN Modem Configuring the server LAN Modem for Dial-in support requir es two main steps: ■ Con.
Configuring the Server LAN Modem 5 2 Click Dial-in Global . Figure 2 Dial-In Global Parameters Scr een 3 In the Channels allocated for Dial-in field, select 1 to limit available dial-in channels to one (the default). Choose 2 to allow either a single-user Multilink PPP dial-in, or to allow two differ ent dial-in users simultaneous access.
6 O FFICE C ONNECT ISDN LAN M ODEM R ELEASE N OTE V. 6.2.0 (ST) AND 5.3.0 (U) For example, if you have already designated a r emote LAN Modem as Site A, and you are now setting up a second LAN Modem for LAN-to-LAN connectivity , you would designate this second LAN Modem as Site B.
Configuring the Server LAN Modem 7 Figure 3 Dial-In Wizard Pr ofile T ype Selection Page.
8 O FFICE C ONNECT ISDN LAN M ODEM R ELEASE N OTE V. 6.2.0 (ST) AND 5.3.0 (U) 3 Select Single User and then click Next . The Username and Password page appears, as shown in Figure 4. Figure 4 Dial-In WIzar d Passwor d Screen 4 Enter a unique name and password to identify and verify this dial-in user when dialing into this LAN Modem.
Configuring the Client Site 9 5 Click Next. 6 Specify the site name you would like to designate for this dial-in user’ s LAN Modem, A, B or C. Note that this site name must be differ ent from the site name designated in this LAN Modem’ s Dial-In Global Parameters, in order to distinguish between the two networks.
10 O FFICE C ONNECT ISDN LAN M ODEM R ELEASE N OTE V. 6.2.0 (ST) AND 5.3.0 (U) Configuring the Client Site for a LAN Modem If a LAN Modem is the device at the client site, you must create a service pr ovider profile on the client LAN Modem in or der to dial into the remote LAN Modem.
Configuring the Client Site for a LAN Modem 11 8 Specify Bandwidth Allocation. 9 Under Private Network Parameters, specify your private network parameters.
12 O FFICE C ONNECT ISDN LAN M ODEM R ELEASE N OTE V. 6.2.0 (ST) AND 5.3.0 (U) 18 In the Default Workstation for Incoming Packets field, specify the workstation to which all unsolicited TCP/UDP packets should be delivered.
Understanding the Three Dial-in Scenarios 13 Understanding the Three Dial-in Scenarios Before you can use the Dial-in Wizard to set up the LAN Modem for dial-in access, you should understand the three dial-in scenarios available for each of your ten authorized dial-in users.
14 O FFICE C ONNECT ISDN LAN M ODEM R ELEASE N OTE V. 6.2.0 (ST) AND 5.3.0 (U) Choose Single-User Dial-in when your dial-in user will access a server LAN Modem via a single ISDN terminal adapter , or via a LAN Modem that will share one IP address for all attached workstations.
Understanding the Three Dial-in Scenarios 15 Once you have chosen a dial-in scenario that best fits your dial-in criteria, you are ready to cr eate a dial-in user profile. Refer to “Cr eate a Dial-In User Pr ofile Using the Dial-In W izard” or “Configuring Dial-in User Parameters” to manually cr eate or further define Dial-in users.
16 O FFICE C ONNECT ISDN LAN M ODEM R ELEASE N OTE V. 6.2.0 (ST) AND 5.3.0 (U) Figure 9 Dial-in Users Parameters Scr een 3 In the Name field, enter a unique name to designate this dial-in user . This value should correspond with the username configured on the client.
Understanding the Three Dial-in Scenarios 17 6 In the Idle T imer field, enter the length of inactivity befo r e the LAN Modem d r ops the incoming call. By default this value is 900 seconds (15 minutes). 7 In the ISP Selection field, select the service p r ovider that this dial-in user can access when dialing into the LAN Modem.
18 O FFICE C ONNECT ISDN LAN M ODEM R ELEASE N OTE V. 6.2.0 (ST) AND 5.3.0 (U) 3 Remote CLID Phone Number 2: If you are r equiring CLID authentication and have two phone numbers, enter the second expected telephone number for this dial-in user .
Upgrade Check Feature 19 Upgrade Check Feature The LAN Modem now pr ovides an Upgrade Check feature which will query the LAN Modem’ s Internet homepage for available firmware updates. Note that you must have a service provider with Internet access configured in order to use the Upgrade Check featur e.
20 O FFICE C ONNECT ISDN LAN M ODEM R ELEASE N OTE V. 6.2.0 (ST) AND 5.3.0 (U) Figure 10 DNS Configuration T able Enter the domain name and IP address as desir ed, and click Submit to save changes.
Miscellaneous Enhancements 21 Miscellaneous Enhancements The latest LAN Modem firmware incorporates the following enhancements, changes, and fixes. ■ Abort Call Functionality ISDN data calls can now be aborted in progr ess via the Manual Call Control page.
22 O FFICE C ONNECT ISDN LAN M ODEM R ELEASE N OTE V. 6.2.0 (ST) AND 5.3.0 (U) ■ Block Call Initiation: This option will prevent NetBIOS calls fr om initiating automatic data calls. Note that once a call has been established, choosing this option may prevent a call fr om coming down.
Miscellaneous Enhancements 23 Copyright © 1999, 3Com Corporation. All rights reserved. Unless otherwise indicated, 3Com register ed trademarks are r egistered in the United States and may or may not be register ed in other countries. 3Com, the 3Com logo, and OfficeConnect, ar e register ed trademarks of 3Com Corporation.
24 O FFICE C ONNECT ISDN LAN M ODEM R ELEASE N OTE V. 6.2.0 (ST) AND 5.3.0 (U).
デバイス3Com OfficeConnect 3C891Aの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
3Com OfficeConnect 3C891Aをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこには3Com OfficeConnect 3C891Aの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。3Com OfficeConnect 3C891Aの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。3Com OfficeConnect 3C891Aで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
3Com OfficeConnect 3C891Aを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又は3Com OfficeConnect 3C891Aの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、3Com OfficeConnect 3C891Aに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわち3Com OfficeConnect 3C891Aデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。