BrotherメーカーBES-962の使用説明書/サービス説明書
ページ先へ移動 of 14
Machine Refere nce Title: Procedures for sewing a DST file using PC Date: February 4, 2009 Models: BE-0901-PC, BE-1201-PC, BE-1204-PC, BE-1206-PC BES-960, BES-962, BES-1240, BES-1260, BES-1262 Prep aration 1. Turn on the computer and start the Brother Embroidery Software, ECSC.
2. It may ask you if you want to save the design previously loaded. (This will save the design in an ECS format) Save – Save d esign without b eing able to change the file n ame. Save as – S ave design with b eing able to ch ange the file n ame. No – Will not s ave the design Left click on your selection.
Loading a DST f ile 1. Left click on the Explorer icon. 1. Left click on the drive or folder containing the DST file you want to read in. In this example the 3½ Floppy (A) is being used.
2. On the right hand side of the window, double left click on the design that you want to load. 3. A “Create Icon” window will be displayed. Left click on OK if this is the design.
4. 4. 4. 4. A window appears asking “How many times is feed required to be A window appears ask ing “How many times is feed required to be A window appears ask ing “How many times is feed requir.
Loading embroi dery hoop to use (Note: If using som e aftermarket hoo ps, such as a Fas tFrame, this ste p is optional.) 1. 1. 1. 1. L eft click on Left click on Left click on Left click on “Settings”. “Settings”. “Settings”. “Settings”.
3. There are two folders containing hoop outlines, Hoop and Hoop2. Please use the correct folder for your model. See below: (Note: These tw o folders are listed under C:Program FilesBES-960.) • HOOP - BE-0901- PC, BE-1201- PC, BES-960, BES-9 62, BES-1240, BES-1260, BES-1262 • HOOP2 - BE-120 4-PC, BE-1206-PC 4.
5. 5. 5. 5. T ry to use the smallest size hoop po ssible for good embroidery. Try to use the smallest size ho op possible for good embroidery. Try to use the smallest size ho op possible for good embroidery. Try to use the smallest size ho op possible for good embroidery.
Setting color se quence 1. Left click on the “Needle Bar Change” icon. 2. The “Needle Bar Change” window appears. Needle Bar Chang e icon.
3. The bottom colors, of the Needle Bar Change window, (1-12) represent the 12 needles on the machine. 4. In this example the design has 8 color changes. The top colors (1-8) represent the color changes in the design. 5. To select the 1 st color of the design to sew needle 12, you click and drag the color chang e bubbl e over needl e 12.
6. Now just drag each color change bu bble over the needl e on the machine that you want that color to be. 7. As you move each bubble over a needle you will notice that your design changes color to reflect the changes you have made . 8. You can click on the “Needle Bar Change” icon to make this window disappear.
Setting sew ing speed 1. All DST files loaded in to the software will default to the fastest “Speed Range”. Left click on the “Down” button to adjust if needed.
Sending design to the machine 1. Left click on the “Start” icon to send the design to machine. You are now finished on the computer. Send icon.
Operations on t he machine pan el 1. The “Ready” light should be on if the design was sent to the machine. 2. If “HOOP” is displayed on the machine panel, press . (Note: This will move the pantograph to match the pos ition of the des ign in the hoop fro m the computer.
デバイスBrother BES-962の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Brother BES-962をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBrother BES-962の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Brother BES-962の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Brother BES-962で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Brother BES-962を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBrother BES-962の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Brother BES-962に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBrother BES-962デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
