BTメーカーSTUDIO 1100の使用説明書/サービス説明書
ページ先へ移動 of 56
U s er G u ide B T S TUDIO 1100.
Section Use Caller Display to see who is calling before you pick up the phone and keep track of incoming calls with the 30 number Calls list. Use the phonebook to store and dial up to 30 of most frequently used phone numbers. As a Digitally Enhanced Cordless T elephony (DECT) product, your B T Studio 1100 provides digital quality call clarity.
Section This User Guide provides you with all the information you need to get the most from your phone. Before you make your first call you will need to set up your phone. F ollow the simple instructions in ‘Getting Started ’ , on the next few pages.
Getting started Location . . . . . . . . . . . . . . . . . . . . . . . 6 Setting up the base and handset . . . . . 6 Getting to know your phone Handset buttons . . . . . . . . . . . . . . . . . 10 Sample screen . . . . . . . . . . . . . . . . . . . 11 Base buttons and LEDs .
5 In this guide Quick key lock . . . . . . . . . . . . . . . . . . 31 T o switch key lock off . . . . . . . . . . . . . 31 Naming a handset . . . . . . . . . . . . . . . . 32 Base settings T o change the base PIN code . . . . . . . 33 De-register a handset from the base .
If you have purchased a BT Studio 1100 multiple pack please follow instructions and Location Y ou need to place your B T Studio 1100 close enough to a mains power and telephone socket so that the cables will reach. The strength of the handset signal depends on where you site the base.
7 G etting started T alk/Standby time In ideal conditions, the handset batteries should give about 10 hours talk time or 100 hours standby on a single charge. The base must remain plugged in to the mains and switched on at all times. Note that new batteries do not reach full capacity until they have been in normal use for several days.
BT Studio 1100 T win handset Y our BT Studio 1100 handsets are the same, so instructions throughout this guide apply to both. Handset numbers Once registered with the base, each handset will display its handset number, and respectively.
Setting up the charger 1. Plug the power adaptor cable into the underside of the charger. 2. Plug the power adaptor into the mains wall socket and switch the power on. 3. Install the 2 x AAA rechargeable batteries supplied into the handset. 4. Place the handset in the charger and charge the handset for at least 24 hours.
Getting to know your phone 1 2 3 4 5 6 7 8 9 0 R Int Clr Redial D i g i t a l C l a r i t y P C a l l s G H I P Q R S A B C J K L T U V D E F M N O W X Y Z Vo l M en u S e c r e c y Redial/P Opens the redial list, page 16 . Enters a P ause when storing numbers, page 18 & 53 .
11 STUDIO 1 § EXT INT © Getting to know your phone Sample screen – These are where the handset icons will appear. * For these features to work you must subscribe to your Network Provider’s Caller Display* and/or Call Waiting* service. Indicates a call is in progress, page 14.
12 Getting to know your phone Base buttons and LEDs C h a r g i n g P o w e r / I n U s e P a g e B T S t u d i o 1 1 0 0 Page Press to page handset(s), page 38 .
Menu map Navigating the menus Y our Studio 1100 handset has a menu system to guide you through the handset and base options. Refer to the menu map below for the available options. When the handset is displaying the idle screen: 1. Press to open the main menu.
Switching the handset power on/off Press and hold the button. Make an external call 1. Press listen for the dial tone then dial the number. The display shows the and then the icons. Preparatory dialling 1. Enter the number first. If you make a mistake, press to delete the last digit.
15 If you have subscribed to your network’s Caller Display service, the caller’s number, or name (if an exact name/number match is found in the phonebook) will also be displayed, See page 22 for more information.
16 Handset ringer volume There are 3 volume levels to select from, or you can set the volume to off. While the phone is ringing: 1. Press to increase or to decrease the ringer volume. The display shows the set volume. Secrecy During a call, you can talk to someone nearby without your caller hearing you.
Press to exit a menu. Keep pressing to return to the idle display at any time. If a name/number match is found in the phonebook the name will be displayed instead of the number. Press to toggle between the name and number. 3. Press to dial the number.
Store a phonebook entry Y ou can use the phonebook to store up to 30 names and numbers for easy dialling. Each number can be up to 20 digits and each name up to 12 characters long. 1. Press to display PHONEBOOK . 2. Press to confirm. 3. Display shows ADD ENTRY .
19 Character map Digit button BLANK - 1 ABC 2 DE F 3 G H I 4 JK L 5 MN O 6 PQ R S 7 TU V 8 WX Y Z 9 9 W X Y Z 8 T U V 7 P Q R S 6 M N O 5 J K L 4 G H I 3 D E F 2 A B C 1 Phonebook.
20 Dial a phonebook entry 1. Press . 2. Enter the first letter of the name you want using the keypad, then scroll to the exact entry using or . 3. Press to dial the number. Delete a phonebook entry 1. Press . Display shows PHONE BOOK . 2. Press to confirm.
T o delete digits Press . T o change individual characters Use or to move the cursor underneath the letter you want to change, then overtype the correct letter. Vo l Clr S e c r e c y Edit a phonebook entry 1. Press . Display shows PHONE BOOK . 2. Press .
If you subscribe to a Caller Display service you can see your caller’s number on your handset’s display (unless it has been withheld) before you answer the call. If you have stored the caller’s name and number in the phonebook then they will be shown alternately in the display.
23 Using the calls list with additional handsets If you are using more than one handset, each handset has a separate calls list. A call answered on one handset will show as unanswered on another. What type of call? The icon indicates a new call waiting to be viewed.
24 Delete all calls list entries 1. Press or to open the calls list. 2. Press and hold until DELETE ALL? is displayed. 3. Press to confirm (or to cancel). Copy a calls list entry to the phonebook 1. Press or repeatedly to open the calls list and scroll to the entry you want to copy.
The second caller is only charged from the second you answer, not while they are waiting to be connected. Call W aiting Providing you have subscribed to your network provider’s Call Waiting service, you will hear a soft beep every 5 seconds if an incoming call arrives while you are already on the phone.
Section The default setting is 1. Y ou can also assign a different ringer melody to entries in your phonebook, see page 18. Y ou can choose a range of settings to suit your personal preferences. Handset ringer melody and volume Y ou have a choice of 3 melodies and 3 volume levels (or OFF).
27 Handset settings The default setting is 1. T o change the external ringer volume 1. Press . 2. Press or until HANDSET is displayed. 3. Press . 4. Press or until EXT RING VOL is displayed then press . The current setting is played. 5. Press or to select a volume then press .
28 Handset settings T o change the internal ringer volume 1. Press . 2. Press or until HANDSET is displayed. 3. Press . 4. Press or until INT RING VOL is displayed then press . The current setting is played. 5. Press or to select a volume then press .
Handset settings The default setting is ON. Switch beeps on/off 1. Press . 2. Press or until HANDSET is displayed. 3. Press . Display shows BEEP . Press to confirm.
30 4. Press or until AUTO ANSWER is displayed then press to confirm. 5. Press or to select ON or OFF then press to confirm. The handset gives a confirmation tone. Selecting a language 1. Press . 2. Press or until HANDSET is displayed. 3. Press . 4. Press or until LANGUAGE is displayed.
Key lock Y ou can lock the keypad so that it cannot be used accidentally while carrying the handset around. T o switch key lock on: 1. Press . 2. Press or until HANDSET is displayed. 3. Press to confirm. 4. Press or until KEY LOCK? is displayed then press to confirm.
32 Naming a handset Each handset registered to the base is assigned a number. Y ou can give a handset a name as well as a number to match the user or location e.g. ANNE or OFFICE . The name can be up to 10 characters long. 1. Press . 2. Press or until HANDSET is displayed.
The default setting is 0000. Y ou can choose a range of settings to suit your personal preferences. Security PIN Y our Studio 1100 has a security PIN code which you will need to change some of the base settings. The default setting is 0000. Y ou may want to change this to prevent unauthorised changes to your settings.
34 Base settings De-register a handset from the base 1. Press . 2. Press or until SETUP is displayed then press to select. 3. Press or until DEL HANDSET is displayed then press to select. 4. Enter your 4 digit PIN then press HANDSET? is displayed. 5. Enter the handset you want to de-register then press .
Base settings The default setting is 3. WARNING If you reset the handset and base, you will lose any names or numbers stored in the phonebook, redial list and calls list. 3. Press or until BASE MELODY is displayed then press . The current melody is played.
36 Base settings 3. Press or until DEFAULT is displayed then press to select. PIN? is displayed. 4. Enter your 4 digit PIN then press . Display will show CONFIRM? Press to sele ct. Y our BT Studio 1100 will reset itself to the default settings. R eset if you have forgotten your PIN code 1.
IMPOR TANT Y ou must choose a handset that is GAP compatible to use with your B T Studio 1100. If you purchase a new handset to use with your B T Studio 1100 it will have to be registered to the base.
38 Using additional handsets Internal calls Y ou can make internal calls between 2 B T Studio 1100 handsets. 1. Press . 2. Enter the other handset number using the keypad ( , or . The called handset will ring and show the calling handset’s number. If there is no response, press to end the call at your handset.
Using additional handsets T ransferring calls Y ou can transfer an external call to another hands et. During an external call: 1. Press an d the number of the other handset. Y our calle r is p ut on hold. The other handset will ring. 2. When the handset answers, press to transfer the call.
IMPOR TANT Y ou can only register your BT Studio 1100 handset to another base if it is GAP compatible. Y ou will not be able to register your B T Studio 1100 handset to a B T Studio or B T Studio 500 base as these products are not GAP compatible. Y our B T Studio 1100 handset can be registered to up to 4 other bases.
41 Using additional bases When the base is located, you will hear a confirmation tone and PIN? will be displayed. 7. Enter the base PIN code and press . Y ou hear a tone to confirm you have entered the correct code and the handset returns to idle mode.
42 Using additional bases If AUTO is selected the handset will automatically link to another base with a strong signal, if the signal it is currently receiving from its present base becomes very poor. Or Press or to select AUTO . When the handset locates the selected base you will hear a confirmation tone.
Problems Possible cause No display The batteries may be flat or dead. Recharge or replace the batteries, see page 7. No dial tone Is the telephone line cord plugged into the telephone wall socket? Check that the base station is connected to the mains power and switched on.
44 Problems Possible cause No ring on the handset Check that the base station is plugged into the phone socket and that the mains power is switched on.
Help BT Accessories and Replacement Items For a full range of accessories and replacement items for B T products please call 0870 240 5522, or visit: B T Studio Helpline 0870 605 8047 Call the dedicat.
Safety General Only use the power supply included with the product. Using an unauthorised power supply will invalidate your guarantee and may damage the telephone.
47 General information It is recommended that if you have a pacemaker fitted you check with a medical expert before using this product. Y our product may interfere with other electrical equipment, e.g. TV and radio sets, clock/alarms and computers if placed too close.
48 Environmental Do not expose to direct sunlight. The product may heat up when the batteries are being recharged. This is normal. However, we recommend that you do not place the product on antique/veneered wood to avoid damage.
Product disposal instructions The symbol shown here and on the product means that the product is classed as Electrical or Electronic Equipment and should not be disposed with other household or commercial waste at the end of its working life.
50 Guarantee Y our B T Studio 1100 digital cordless telephone is guaranteed for a period of 12 months from the date of purchase. Subject to the terms listed below, the guarantee will provide for the r.
Within the 12 month guarantee period: If you experience difficulty using the product, prior to returning it, please read the ‘Help’ section beginning on page 43, or contact the B T Studio 1100 Helpline on 0870 605 8047 , 8am–8pm, Monday to Saturday and 10am–3pm, Sunday.
52 T echnical information How many telephones can you have? All items of telephone equipment have a Ringer Equivalence Number (REN), which is used to calculate the number of items which may be connected to any other telephone line. Y our B T Studio 1100 has a REN of 1.
Declaration of Conformance Hereby, Suncorp T echnologies, declares that this B T Studio 1100 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The Declaration of Conformance for the B T Studio 1100 is published on the website: http://www.
54 T o insert a pause 1. Begin storing a number and press P where a pause is needed. P is shown in the display. Recall The R button is used when connected to certain switchboards, e.g. to transfer calls, and for some B T Calling Features or those services available via your network provider.
T emporary change to dialling mode If you have set your B T Studio 1100 to Pulse dialling, you can temporarily switch to T one dialling during a call. 1. Press , then press , then dial the number as normal. Y our B T Studio 1100 will switch to T one dialling only for the duration of this call.
Offices worldwide The telecommunications services described in this publication are subject to availability and may be modified from time to time. Services and equipment are provided subject to British T elecommunications plc’s respective standard conditions of contract.
デバイスBT BT STUDIO 1100の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
BT BT STUDIO 1100をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBT BT STUDIO 1100の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。BT BT STUDIO 1100の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。BT BT STUDIO 1100で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
BT BT STUDIO 1100を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBT BT STUDIO 1100の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、BT BT STUDIO 1100に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBT BT STUDIO 1100デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
