BuffaloメーカーLinkStation Pro Duo LS-WTGL/R1の使用説明書/サービス説明書
ページ先へ移動 of 71
User Manual LS-WTGL/R1 LinkStation Pro Duo www . bu f f alote ch . c om v2.2.
2 Introduction Congratulations on your new LinkStation Pro Duo. This user manual is intended to assist you in conguring it. Because we’re constantly updating our products, the images and text in this manual may vary slightly from the images and text displayed by your LinkStation.
3 Table of Contents Back Panel Layout ............................................................ 4 Installation ....................................................................... 5 Power Mode Switch .............................................
4 Back Panel Layout Function Button USB Port 1 Power Switch Eth e rnet Cable (to router ) USB Port 2 Power Cable.
5 Insert the LinkNavigator CD into your computer’s CD-ROM drive. On a PC, setup should automatically launch. If it does not, manually launch setup.exe by pressing Start and selecting the Run... option. When the Run dialog opens, type d:LSnavi.exe (where d is the drive letter of your CD-ROM drive).
6 Press the Begin Installation button to begin. LinkNavigator Setup If you’re installing on a PC, click on Easy Setup (the pink, upper button). Mac users can skip this step.
7 LinkNavigator Setup The wizard will step you through installation. Follow the directions on each screen and continue pressing Next to step through the installation.
8 Power Mode The “Power Mode” switch on the back of the unit has three positions: “Auto”, “On”, and “Off”. The “Auto” position automatically powers the unit on or off based with your PC. If your PC is turned on the LinkStation will power up; if the PC is turned off the LinkStation will power down.
9 Two new icons will be on your desktop: Shortcut for LinkStation and Buffalo NAS Navigator . Clicking Shortcut for LinkStation takes you directly to the folders on your LinkStation. Share is the main folder that you can put les and folders in. Info contains a copy of your user manual.
10 To Access LinkStation Data from a PC: Your LinkStation uses “shares” (folders) to hold data. A share called “share” is already congured on your LinkStation, and you can create additional shares in Shared Folders .
11 You can map additional driveletters to shares on your LinkStation. From the Start menu, select Run... . Enter your LinkStation’s hostname (if you don’t know it, you can get it from the NASnavigator utility) or IP address. Press OK . Your LinkStation should open.
12 From the Tools pull-down menu, select Map Network Drive . Choose a drive letter from the Drive: pull down menu. To specify the folder to map, either nd it with Browse or enter LinkStation_ Names.
13 After installing the LinkNavigator software, your Mac will have two new icons on the desktop. The LS-ProDuoSettings.txt le contains the IP address of your LinkStation. NAS Navigator is the LinkStation’s client utility. With the information in the LS-ProDuoSettings.
14 You can add a link to your LinkStation’s share folder to your desktop by adding it to the Mac’s server list. Begin by clicking Go , and then choose Connect to Server .
15 Select Guest and click on Connect . Note: If you have congured share permissions on your LinkStation, select Registered User and enter your login credentials. Accessing LinkStation Data from a Mac Select the volume that you want to mount, such as share or share-mac , from the list of folders on the LinkStation.
16 If you don’t know your LinkStation’s IP address, there are several ways to get it. One simple method is to use the NAS Navigator client utility (included on your CD) to nd your LinkStation(s). Just click on the icon for your LinkStation and you’ll be able to read its IP address.
17 LinkStation Expansion LinkStation Pro Duo has two USB 2.0 ports on the rear. This port can be used for adding an external USB Hard Drive or a USB Printer. LinkStation will share connected USB devices, allowing everyone on the network to use them. To connect a USB hard drive to your LinkStation, simply plug it into the USB port.
18 Using the Function Button Function Button The Function Button has several functions. You can copy digital media les directly to the LinkStation Mini from a USB storage device, such as a digital camera, USB ash drive, or external hard disk. 1.
19 Initialization - You can easily bring your LinkStation back to factory settings with the following steps. 1. Move the power switch to the ‘Off’ position. The LinkStation will shut down after about 90 seconds. 2. While holding down the function button, move the power switch to the ‘On’ postion.
20 Advanced Settings The Conguration GUI may be accessed at any time by typing the IP address of your LinkStation into the URL bar of a browser running on a computer connected to the same network as the LinkStation. You may also open the Conguration GUI from NAS Navigator by right-clicking on your LinkStation and choosing Open Web Admin .
21 This login prompt will appear. Enter admin for the user name. Until you change it, the password for the admin account will be password . Press the OK button when nished. Advanced Settings User name: admin Password: password See page 38 to change your password.
22 Welcome to Advanced Settings , the conguration GUI for the LinkStation! Bookmark this page in your browser so it can be easily accessed for future conguration changes. If the LinkStation’s IP Address changes, you will need to recreate the link.
23 You may modify your LinkStation’s hostname and description under Hostname Setup . A friendly, easy-to-remember name (e.g. “LinkStation”) is recommended. Make sure that the date and time are correct in Date and Time Setup . To synchronize time settings with those in your computer, press Use Local Time .
24 Advanced Settings Network (IP Address Properties) In most networks, LinkStation will get its IP Address automatically from a DHCP server. You may disable DHCP here. If DHCP is disabled and an IP Address is not set manually, it will default to 192.168.
25 Advanced Settings Network (Workgroup/Domain) If you are unfamiliar with Domain/Active Directory networking, then please leave the Network Type selected as Workgroup and Workgroup Name set to Workgroup .
26 Advanced Settings Disk Management (Drive Properties) This page shows the properties for the drives in your LinkStation Pro Duo. If you have a USB hard drive plugged into the linkstation, its properties will appear here as well.
27 Advanced Settings Disk Management (RAID Setup) Congure your RAID settings here. To change the type of RAID array used, click on “RAID Array 1” under RAID Setup.
28 Advanced Settings Disk Management (USB hard drives) From here you can see your USB hard drive’s system information. If the hard drives’ information isn’t displayed properly, try restarting your USB hard drives and then restarting your LinkStation.
29 Advanced Settings Disk Management (Disk Check) Disk Check checks any of your hard drives for errors. To use Disk Check, select the disk that you want to check from the target pulldown and click Select Target .
30 Disk Format To format a hard drive or array, select it from the Target Disk drop box. Choose the le system desired from the File System dropbox (internal drives can only be formatted with XFS). Note that FAT32 has a 4 gigabyte lesize limit for individual les.
31 Disk Erase To remove all data from a Disk, use Disk Erase . Once erased, this data cannot be restored. Advanced Settings.
32 Advanced Settings Shared Folders To add new shares on your LinkStation, select Shared Folders from the left side menu, and then click the Add button under Shared Folders Setup . To delete a share or shares, check the checkbox next to the shares you’d like to delete, and press the Delete button.
33 Advanced Settings Adding a new Shared Folder To add a new shared folder, enter a name for it in the Shared Folder Name box and choose which Disk Space it will reside in.
34 Advanced Settings Shared Folders (Access restrictions) To use Access Restrictions for a share, select Enable . Highlight groups or users in the All Groups/ Users column and use the left-pointing ar.
35 Advanced Settings Shared Folders (Service Setup) To allow FTP Access to your LinkStation, choose Enable for FTP Server . To enable legacy AppleTalk support, choose Enable for AppleTalk Protocol . FTP Server Info: Enabling the FTP Server will allow users to connect to shares via FTP protocol.
36 Advanced Settings Group Management Groups allow for easier management of permissions in some networks, specically networks with a lot of users in different departments. To Delete a group, put a check next to its name and click Delete . To add a group to your LinkStation, click Add .
37 Advanced Settings User Management LinkStation is precongured with two users, admin and guest , out of the box. The admin and guest user accounts cannot be deleted. To delete any other user, put a check next to their name and click Delete . To add a new user, click Add .
38 Advanced Settings User Management (changing passwords) To change an account’s password, click on the name of the account under User Settings . Note: if a user name and password are used to log in.
39 With Buffalo’s WebAccess, you can access your LinkStation from anywhere in the world with an Internet connection. It’s easy to access your les, or share them with other people, wherever they may be. WebAccess WebAccess is set up from within the Conguration GUI.
40 Select ‘Folders Setup’ in the left-side menu. Any shares on your LinkStation will appear on the list to the right. Click on the icon beside it to select a share for web access. Choose your desired level of Web Access from the ‘Web Access Settings’ dropbox: ‘Disable’ will prevent remote access to this share through WebAccess.
41 To access your LinkStation remotely, open a browser window on any computer connected to the Internet and go to buffalonas.com . In the dialog box, type the BuffaloNAS name that you set on page 37. Alternately, you can go directly to your share by typing BuffaloNAS.
42 To access individual folders on the right, click on their open links. Using WebAccess Clicking on individual les will give you other options, depending on the letype.
43 Printer Installation If a USB printer is plugged into your LinkStation, you can easily add the printer to any Windows PC on your network. Follow these steps for each PC that you want to be able to access the printer. • To begin, enable the print server in the conguration GUI for your LinkStation.
44 Printer Installation • Access the LinkStation by pressing Start , selecting the Run... option, and entering LinkStation_Name (where LinkStation_ Name is the DNS name of your LinkStation). Press the OK button when nished. • Right click on the lp icon and select Connect .
45 Printer Installation • The Add Printer Wizard will launch. Select the proper driver for your printer. If the specic printer is not in the list, you will be required to insert the CD that came with your printer into your PC’s CD-ROM drive and press the Have Disk button.
46 Printer Installation • To print a test page or congure additional printer settings, right click on the lp printer icon and select Properties . This will open the printer’s driver properties page. • Press the Print Test Page button to print a test page.
47 Print Server (Delete Print Queue) If a corrupt print job is sent to a printer, printing may suddenly fail. If your print jobs seem to be locked up, clearing the print queue may resolve the issue. To delete the print queue, press the Delete button. This will clear all current print jobs.
48 Accessing Multiple Shares from a single PC When accessing multiple shares to a Windows PC, you may see this error message. This is caused by having multiple shares to the same resource using different login credentials. The error occurs when connecting to at least one secure, restricted share.
49 Advanced Settings Mapping Multiple Shares When mapping any share, select the Connect using a different user name option. A login and password prompt will appear. Use the username and password required by any secure, restricted shares for all shares.
50 Advanced Settings Disk Backup To create a backup job, click on a job number. The Edit Backup Job dialog will appear..
51 Advanced Settings Disk Backup (Edit Backup Job) A Backup Job can run regularly on a daily or weekly schedule, or immediately by appropriate choices in the Backup Job Schedule eld. Date and Time for the backup may be entered, and Encryption and Compression enabled or disabled.
52 Advanced Settings Disk Backup (LinkStation List) The LinkStation list shows other LinkStations in your network that you can congure network backups to.
53 Advanced Settings Disk Backup (Add LinkStation) To add a remote LinkStation to your network, enter its numerical IP Address in the Remote LinkStation IP Address eld and click the Add to List button. For remote LinkStation backups, make sure both rewalls are congured to allow trafc in and out of their networks.
54 Advanced Settings Maintenance (Notication) If your LinkStation is remotely managed, you may choose to receive nightly status reports and be notied of any disk events by email. To set this up, enable Mail Notication and enter the IP Address of your SMTP server* in the SMTP Server Address eld.
55 Advanced Settings Maintenance (UPS Settings) If using an Uninteruptable Power Supply, congure the LinkStation’s UPS settings here..
56 Advanced Settings Maintenance (Alert Settings) Alerts can be congured on the LinkStation to make audible noises when a problem is detected. Along with the audible noise, alert emails will be sent out if Mail Notication was properly congured.
57 Advanced Settings Maintenance (Shutdown) From the Shutdown page, press Apply to shutdown LinkStation. This has the same function as holding down the power button on the front of LinkStation, but may be done remotely. Turning on the LinkStation after a shutdown requires a physical button push on the front of LinkStation.
58 Advanced Settings Maintenance (Initialization) Initialization is a reset procedure that restores all settings back to the default, out of box, conguration. All conguration, users, groups, and backup jobs are lost, but actual data and shares on the hard are NOT lost.
59 System Status (System Information) This page shows you the System Information for your LinkStation. Firmware updates are occasionally available from www.buffalotech.com for the LinkStation Pro Duo. These must be executed from a Windows PC on the same network.
60 Advanced Settings System Status (USB Details) This page shows you details on USB hard drives and UPSs plugged into your LinkStation. In this example, no USB hard drives are plugged in to the LinkStation.
61 Advanced Settings System Status (Drive Properties) This page shows you the properties of all hard drives in and attached to your LinkStation..
62 Advanced Settings System Status (Network Information) This page shows you the System Information for your network connection..
63 Advanced Settings System Status (Logs) Choose a Log from the dropdown menu and click View to see it..
64 LinkStation Client Utility This is the Buffalo NAS Client Utility . Installed on your PC, it allows you to access each of the LinkStations (and TeraStations) on your network.
65 LinkStation Client Utility IP Address Setup From the IP Settings tab, you may enter your IP Address and Subnet Mask manually, or enable your LinkStation to acquire them automatically from a DHCP server.
66 Disk Errors If LinkStation encounters a disk error, it will be reported in the LinkStation status on the top of any of the Web-Based conguration screens.
67 Technical Specications Data Transfer Rates: 10/100/1000 Mbps Hard Drives: (2) SATA 7200 rpm Main Connector Type: RJ-45 (Ethernet) USB Interface: USB 2.
68 Contact Information (North America) Buffalo Technology USA Inc. 11100 Metric Blvd., Suite 750 Austin, TX 78758 GENERAL INQUIRIES Monday through Friday 8:30am-5:30pm CST Direct: 512-794-8533 | Toll-free: 800-456-9799 | Fax: 512-794-8520 | Email: sales@ buffalotech.
69 Buffalo Technology UK Ltd. 2 Bracknell Beeches, Old Bracknell Lane Bracknell, Berkshire, RG12 7BW United Kingdom GENERAL INQUIRIES Email: sales@buffalo-technology.com TECHNICAL SUPPORT Buffalo Technology provides technical support in English, German, French, Italian and Spanish.
70 Thank you for your interest in Buffalo products. Our GPL software delivery policy is outlined below. For each individual product and revision, please send one individually packaged self addressed padded CD shipping envelope, containing a blank CD-R to the following address: Buffalo Technology USA Inc.
71 Thank you for your interest in Buffalo products. Our GPL software delivery policy is outlined below. For each individual product and revision, please send one individually packaged self addressed padded CD shipping envelope, containing a blank CD-R to the following address: Buffalo Technology Ireland Ltd Free Zone East, Shannon, Co.
デバイスBuffalo LinkStation Pro Duo LS-WTGL/R1の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Buffalo LinkStation Pro Duo LS-WTGL/R1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBuffalo LinkStation Pro Duo LS-WTGL/R1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Buffalo LinkStation Pro Duo LS-WTGL/R1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Buffalo LinkStation Pro Duo LS-WTGL/R1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Buffalo LinkStation Pro Duo LS-WTGL/R1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBuffalo LinkStation Pro Duo LS-WTGL/R1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Buffalo LinkStation Pro Duo LS-WTGL/R1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBuffalo LinkStation Pro Duo LS-WTGL/R1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
