Canonメーカー2805B002の使用説明書/サービス説明書
ページ先へ移動 of 38
English A52_E.book Page 1 Friday, June 10, 2005 4:40 PM.
2 Thank you for purchasing a Canon product. The Canon S peedlite 430EX is a multi- feature flash unit for Canon EOS cameras. It works automatically with E-TTL II, E-TTL, and TTL autoflash systems. It can be used as an on-camera flash or as part of a wireless flash system.
3 The operation procedures in this inst ruction manual assume that both the camera and S peedlite’s power switches are ON. Icons are used in the text to indicate the respective buttons, dials, and settings. They match the same icons found on the camera and S peedlite.
4 Nomenclature Built-in wide panel (retracted) (p.18) Flash head Wireless sensor AF-assist beam emitter (p.22) Mounting foot (p.9) Locking pin (p.9) Contacts Bracket mount cover Locking ring (p.9) Bracket fitting Case Mini stand Mini stand pocket Shoe A52_E.
5 LCD panel * < A > LCD panel illumination/ Custom Function setting button (p.6/20) * < 8 > Select/Set button < J > Pilot lamp/T est firing/ Wireless slave auto power off cancel button (p.10/25) < D > Flash mode/Slave setting button (p.
6 LCD Panel T o illuminate the LCD panel, press the < B > button. The items actually displayed de pend on the cu rrent settings. Manual flash output level Flash exposure compensation amount <.
7 Getting Started and Basic Operation Installing Batteries ............ .......................... ............ 8 Attaching to the Camera ........................ ................. 9 T urn on the Power Swit ch ..................... ............... 10 Fully Automatic Flash Shoo ting .
8 Install four size-AA batteries. 1 Open the cover . Slide the battery compartment cover as shown by the arrow and open it. 2 Install the batteries. Make sure the + and – battery contact s are correctly oriented as shown in the battery compartment. 3 Close the cover .
9 1 Loosen the locking ring. T urn the locking ring as shown by the arrow to loosen it. 2 Atta ch it to the camera. Slip the S peedlite’s mounting foot all the way into the hot shoe. 3 Tighten. T urn the locking ring as shown by the arrow . The locking pin will protrude from the mounting foot to further secure the attachment.
10 1 Set the power switch to < K >. X The flash will start recycling. 2 Check that the flash is ready . When the pilot lamp lights in red, the flash is ready to fire. T o fire a test flash, press the pilot lamp. T o save battery power , the power will tu rn off automatically after 90 sec.
11 When you set the camera’s shooting mode to < V > (Program AE) or < U > (Full Auto), E-TTL II/E-TTL fully automatic flash will make it as easy as normal AE shooting. 1 Set the Speedlite to < a >. Press the < D > button so that < a > is displayed.
12 Just set the camera’s shooting mode to < W > (aperture-priority AE), < X > (shutter-priority AE), or < q > (manual) and you can use E-TTL II/E-TTL autoflash. If you use the < Z > or < Y > shooting mode, the resu lt will be the same as using the < V > (Program AE) mode.
13 Using Flash f Flash Exposure Compen sation ....................... 14 7 FE Lock ......................... ............................... 15 c High-S peed Sync ......... .......................... .......... 16 r Second-Curtain Sync . .............
14 Y ou can adjust the flash outpu t as easily as normal exposure compensation. Flash exposure compens ation can be set up to ±3 stops in 1/3-stop increments. (If the camera’ s exposure compensation is set in 1/2-stop increments, flash exposure compensation is set in 1/2-stop increments.
15 FE (flash exposure) lock enables you to lock the correct flash exposure for any part of the picture. With < a > displayed on the LCD panel, you press the camera’ s < 7 > button. If the camera does not have the < 7 > button, press the < P > button.
16 With high-speed sync, you can use flas h with all shutter speeds. This is convenient when you want to use aperture priority for fill-flash portraits. Press the < E > button so that < c > is displayed. Check that the < F > icon is lit in the viewfinder .
17 By pointing the flash head toward a wall or ce iling, the flash will bounce off the surface before illuminating t he subject. This can soft en shadows behind the subject for a more natural- looking shot. This is called bounce flash. Set the Bounce Direction Hold down the < z > button and turn the flash head.
18 The flash coverage can be set to match the lens focal length from 24mm to 105mm. The flash coverage can be set automatically or manually . Also, with the built-in wide panel, the flash coverage will be compatible with ultra wide-angle lenses as short as 14mm.
19 Y ou can set the flash output from 1/64 power to 1/1 full power in full- stop increments. Use a hand-held flash meter to deter mine the required flash output to obtain a correct flash exposure. Be sure to first set the camera’ s shooting mode to < W > or < q >.
20 Y ou can customize S peedlite features to suit your preferences. Do it with Custom Functions. 1 Press the < A > button for 2 sec. so that < u > is displayed. 2 Select the Custom Function No. Press the < 9 > button to select the Custom Function number .
21 C.Fn-05-1:Convenient when you want to check the depth of field. (p.28) EOS digital cameras have one of three image sizes. The lens’ ef fective focal length will differ depending on the camera’ s image size.
22 When the flash fires, the color temper ature information is transmitted to certain specific EOS digital camera . This feature optimizes the flash picture’s white balance. When the camera’ s color balance is set to < A > or < Q >, it will work automatically .
23 Wireless Flash Wireless Flash .............. ......................... ............... 24 Setting Manual Flash with the Slave Unit ............. 29 A52_E.
24 With multiple Canon S peedlites having the wireless flash feature, you can create various lighting effects with th e same ease as using normal E-TTL II autoflash. The settings you input with the master unit attached to the camera are also transmitted to the slave unit(s) controll ed by wireless.
25 6 Set the master unit’ s flash mode to < a >. The slave unit(s) will also be automatically set to < a >. 7 Check that the flash is ready . When the slave unit is ready to fire, the AF-assist beam will blink once each second. 8 Check the flash operation.
26 Use the mini stand (tripod socket provided) to prop up the slave unit. Use the bounce feature to swing the slave unit’s flash body so that the wireless sensor faces the master unit. Indoors, the wireless signal may also bounce off the wall so there is more leeway in positioning the slave unit(s).
27 Flash exposure compensation and other settings set with the master unit will also be automatically set in the slave units. Thus, you need not make settings on the slave unit(s). Wireless flash with the following settings can be done in the same way as with normal flash shooting.
28 Set the slave ID if you use two (A and B) or three (A, B, and C) slave groups. 1 Press the < G > button so that < x > blinks. 2 Press the < 9 > button to select the slave ID (A, B, or C). 3 Press the < 8 > button to set the slave ID.
29 Manual flash can be set manually with the slave unit. Do this in the following cases: (1) When you want to set the fl ash output with the slave units individually for wireless or manual flash, as with studio flash units. (2) When you use S peedlite T ransmitter ST -E2 for wireless or manual flash.
30 1 Speedlite 430EX (Slave unit) 2 Mini stand (included with 430EX) 3 Speedlite 580EX (On-camera/Master unit) 4 Speedlite T ransmitter ST -E2 Dedicated transmitter for wireless co ntrol of 430EX set as slave units. 5 Macro Ring Lite MR-14EX / 6 Macro T win Lite MT -24EX Flash for macro photography .
31 Have a problem? See the table below . The mounting foot’ s locking pin has not been retracted. X Loosen the locking ring all the way before detaching the S peedlite. (p.9) The batteries are installed in the wrong orient ation. X Install the batteries in the correct orient ation.
32 When you set the flash coverage manually , the setting was a higher number than the lens focal length, resulting in a dark periphery . X Set the flash coverage that is a lower number than the lens focal length or set it to auto zoom. (p.18) If only the bottom of the picture looks dark, you were too close to the subject.
33 •T y p e T ype: On-camera, E-TTL II/E-TTL/TTL autoflash S peedlite Compatible cameras: T ype-A EOS ca meras (E-TTL II/E-TTL autoflash), T ype-B EOS cameras (TTL autoflash) Guide No.
34 • AF-Assist Beam Linkable AF points: 1 - 9 AF points (28mm or longer focal length) Effective range (Approx.): At center: 0.7 - 10 m / 2.3 - 32.8 ft, Periphery: 0.7 - 5 m / 2.3 - 16.4 ft •P o w e r S o u r c e Internal power: Four size-AA alkaline * Size-AA Ni-MH or lithium batteries also possible Battery life (Approx.
35 If you use the 430EX with a T ype-B camera (TTL autoflash camera), note the available features and restrictions below . When a T ype-B camera is used with the 430EX set to autoflash, < b > will be displayed on the S peedlite’s LCD panel.
36 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1 ) This device may not ca use harmful interference, and (2) this device mu st accept any interference received, including interference that may ca use undesired operation.
37 This mark indicates that the prod uct complies with Australia’s EMC regulations. A52_E.book Page 37 Friday, June 1 0, 2005 4:40 PM.
This Instructions booklet is dated July 2005. For in formation on the camera’s compatibility with system accessories marketed af ter this date, contact your nearest Canon Service Center .
デバイスCanon 2805B002の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Canon 2805B002をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCanon 2805B002の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Canon 2805B002の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Canon 2805B002で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Canon 2805B002を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCanon 2805B002の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Canon 2805B002に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCanon 2805B002デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
