Canonメーカー550Dの使用説明書/サービス説明書
ページ先へ移動 of 260
INSTRUCTION MANUAL INSTRUCTION MANUAL ENGLISH The “Quick Reference Guide” and “Software Start Guide” are provided at end of this manual..
2 The EOS 550D is a high-performance, digital single-lens reflex camera featuring a fine-detail CMOS sensor with 18.0 effective megapixels, DIGIC 4, high-precision and high-spe ed 9-point AF , approx. 3.7 fps continuous shooting, Live View s hooting, and Full HD (Full High- Definition) movie shoot ing.
3 Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer . * Battery Charger LC-E8 or LC-E8E is provided. (The LC-E8E comes with a power cord.) If you purchased a Lens Kit, check that the lens is included.
4 Icons in this Manual < 6 > : Indicates the Main Dial. < V > < U > : Indicates the < S > cross keys. < 0 > : Indicates the setting button. 0 , 9 , 7 , 8 : Indicates that the respective function remains active for 4 sec., 6 sec.
5 For first-time DSLR users, Chap ters 1 and 2 explain the camera’s basic operations and shoo ting procedures. Chapters Introduction Camera basics. 2 Getting St arted 23 Basic Shooting and Image Playback Fully automatic shooting for different subject s.
6 2 1 Introduction 2 Item Check List ........................................................................ .......................... 3 Conventions Used in this Manual ...................................................................... 4 Chapters .
7 Contents 4 3 Creative Shooting 59 d : Program AE ...................................................................................... ..........60 Z : Changing the ISO Speed .........................................................................
Contents 8 5 8 6 7 Shooting with the LCD Mo nitor (Live View Shooting) 107 A Shooting with the LCD Monitor ............................................................... 108 Shooting Function Settings .................................................
9 Contents 11 10 9 Slide Show (Auto Playback) .............................................. .............................165 Viewing the Images on TV ....... ...................................................................... 167 K Protecting Images .
10 Contents at a Glance Shooting Shoot automatic ally Î p.45 - 57 (Basic Zone modes) Shoot continuo usly Î p.50, 53, 70 ( i Continuous shooting) T ake a picture of yourself in a gro up Î p.71 ( j Self-timer) Freeze the action Blur the action Î p.78 ( s Shutter-priority AE) Blur the background Keep the background in sharp focus Î p.
11 Make a large-size print of the picture Î p.72 ( 73 , 83 , 1 ) T ake m any pictures Î p.72 ( 76 , 86 ) Focusing Change the point of fo cus Î p.68 ( S AF point selection) Shoot a moving subject Î p.53 , 67 (AI Servo AF) Playback View the images with the camera Î p.
12 Camera Care This camera is a precision in strument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater . If you accidentally drop th e camera into wa ter , promptly consult your nearest Canon Service Center .
13 Handling Precautions LCD Monitor Although the LCD monitor is manuf actured with ve ry high precision technology with over 99.99% ef fective pixels, there might be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc.
14 Quick Start Guide 1 Insert the battery . (p.26) T o charge the battery , see page 24. 2 Att ach the lens. (p.33) Align the lens’ white or red index with the camera’s index in the matching color . 3 Set the lens focus mode switch to <AF>. (p.
15 Quick Start Guide 6 Set the Mode Dial to < 1 > (Full Auto). (p.46) All the necessary camera settings will be set automatically . 7 Focus the sub ject. (p.37) Look through th e viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway , and the camera will focus the subject.
16 The names in bold indicate the parts mentioned up until the “Basic Shooting and Image Playback” section. Nomenclature Remote control terminal (p.205) External microphone IN terminal (p.134) HDMI mini OUT terminal (p.167) Audio/video OUT/ Digital terminal (p.
17 Nomenclature Tripod socket Access lamp (p.32) Battery compartment cover release lever (p.26) Battery compartment cover (p.26) < O > Aperture/ Exposure compensation button (p.83/87) Viewfinder eyepiece Display-off sensor (p.146) Eyecup (p.205) Dioptric adjustment knob (p.
Nomenclature 18 Shooting Settings Display * Displayed if an Eye-Fi card is used. The display will show only the settings currently applied. Aperture ISO speed (p.62) Shutter speed Shooting mode White balance (p.99) Q Auto W Daylight E Shade R Cloudy Y Tungsten light U White fluorescent light I Flash O Custom 2 White balance correction (p.
19 Nomenclature Viewfinder Information The display will show only the settings currently applied. Aperture AF point activation indicator < > AF points < Z > ISO speed < o > Focus confirmation light Max.
Nomenclature 20 Mode Dial The Mode Dial includes the Basic Zone modes, Creative Zone modes, and Movie shooting mode. Basic Zone All you do is press the shutter button. Fully-automatic shooting suiting the subject. 1 : Full Auto (p.46) C : Creative Auto (p.
21 Nomenclature Lens Lens without a dist ance scale Lens with a distanc e scale Focus mode switch (p.33) Lens mount index (p.33) Contacts (p.13) Hood mount (p.231) Filter thread (front of lens) (p.231) Focusing ring (p.69,120) Zoom ring (p.34) Zoom position index (p.
Nomenclature 22 Battery Charger LC-E8 Charger for Battery Pack LP-E8 (p.24). Battery Charger LC-E8E Charger for Battery Pack LP-E8 (p.24). Battery pack slot Power plug Charge lamp Full-charge lamp This power unit is intended to be correctly orientated in a vertical or floor mount position.
23 1 Getting Started This chapter explains preparatory steps before you start shooting and basic camera operations. Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration.
24 1 Remove the protective cover . 2 Att a ch the battery . As shown in the illustration, attach the battery securely . T o de tach the battery , f ollow the above procedure in reverse. 3 Recharge the battery . For LC-E8 As shown by the arrow , flip out the battery charger ’s prongs and insert the prongs into a power outlet.
25 Charging the Battery Recharge the battery on the day before or on the day i t is to be used. Even during storage, a charged battery will gradually discharge a nd lose its power . After recharging the battery , detach it and unplug the charger from the po wer outlet.
26 Load a fully charged Battery Pack LP-E8 into the camera. 1 Open the battery compartment cover . Slide the lever as shown by the arrow and open the cover . 2 Insert the battery . Insert the end with the battery contacts. Insert the battery until it locks in place.
27 If the date/time sett ing screen appears when you turn on the power switch, see page 29 to set the date/time . < 1 > : The camera turns on. < 2 > : The camera is turned off and does not operate. Set to this position when not using the camera.
Turning on the Power 28 When the power switch is set to < 1 >, the battery level will be indicated in one of four levels: z : Battery level is OK. x : Battery level is slightly down, but adequate power remains. c : Battery will be exhausted soon .
29 When you turn on the power for the first time or if the date/time has been reset, the Date/Time setting screen will appear . Follow steps 3 and 4 to set the date/time. Note that the date/time appended to recorded images will be bas ed on this date/time setting.
30 1 Display the men u. Press the < M > button to display the menu. 2 Under the [ 6 ] t ab, select [Language K ]. Press the < U > key to select the [ 6 ] tab. Press the < V > key to select [ Language K ] (the third item from the top), then press < 0 >.
31 The captured images are recorded onto the card (sold separately). Make sure the card’s write protect switch is set upward to enable writing/erasing.
Installing and Removing the SD Card 32 1 Open the cover . Set the power switch to < 2 >. Check that “Recording...” is not displayed on the LCD monitor . Make sure the access lamp is off, then open the cover. 2 Remove th e card. Gently push in the card, then let go.
33 1 Remove th e cap s. Remove the rear lens cap and the body cap by turning them as shown by the arrows. 2 Att a ch the lens. Align the lens’ red or white index with the camera’s index matching the same color . Turn the lens as shown by the arrow until it snaps in place.
Attaching and Detaching a Lens 34 T o zoom, tur n the zoom ring on the lens with your fingers. If you want to zo om, do it before focusing. T urning the zoom ring after achieving focus may throw o ff the focus slightly . While pressing the lens release button, turn t h e lens as shown by the arrows.
35 When you use the IS lens ’ built-in Image St abilize r, camera shake is corrected to obtain a less blurr ed shot. The procedure explained here is based on the EF-S 18-55mm f/3.5-5.6 IS lens as an exa mple. * IS stands for Image S tabilizer . 1 Set the IS switch to < 1 >.
36 T urn the dioptric ad justmen t knob. T ur n the knob left or right until the nine AF points in the viewfinder look sharp. T o obtain sharp images, hold the camera still to minimize camera shake. 1. Wrap your right hand around the camera grip firmly .
37 Basic Operation The shutter button has two steps. Y ou can press t he shutter button halfway . Then you can further press the shutter button completely . Pressing ha lfway This activates autofocusing and automatic exposure metering that sets the shutter speed and aperture.
38 Y ou can directly select and set th e shooting functions displayed on the LCD monitor . This is called the Quick Control screen. 1 Display the Quick Cont rol screen . When the shooting settings are displayed, press the < Q > button. X The Quick Control scr een will activa te ( 7 ).
39 Q Using the Quick Control Screen On the Quick Control screen, select the function and press < 0 >. The respective setting screen will then appear (except for the shutter speed and aperture). T ur n the < 6 > dial to change the setting. Y ou can also press the < U > key to change the setting.
40 Y ou can s et various functi ons with t he menus such as the i mage-recor ding qualit y , date/t ime, etc. Whi le looki ng at the LCD moni tor , use the < M > button, < S > cross keys, and < 0 > button on the camera back.
41 3 Menu Operations 1 Display the men u. Press the < M > button to display the menu. 2 Select a tab. Press the < U > key to select a tab. Y ou can also turn the < 6 > dial to select a tab. 3 Select the de sired item. Press the < V > key to select the item, then press < 0 >.
42 If the card is new or was previously formatted by another camera or computer , format the card with the camera. When the card is formatted, all imag es and data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep.
43 3 Formatting the Card The card is new. The card was formatted b y a different camera or a computer. The card is full with images or da ta. A card-related error is displayed (p.224) . Execute [Format] in the following cases: About Low-level Formatt ing Do low-level formatting if the ca rd’s recording or reading speed seems slow .
44 The LCD monitor can display t he shooting settings screen, menu screen, image, etc. Displayed w hen the cam era is turned on. When your eye nears the viewfinder eyepiece, the display-off sensor (p.17, 146) turns off the LCD monitor automatically . This prevents the bright LCD monitor from interfering with your view .
45 2 Basic Shooting and Image Playback This chapter explains how to use the Basic Zone modes on the Mode Dial for best results and how to playback images. With the Basic Zone modes , all you do is point and shoot and the camera sets everything automatically (p.
46 1 Set the Mode Dial to < 1 >. 2 Aim any AF point over the subject. All the AF points will be used to focus, and generally the closest object will be focused. Aiming the center AF point over the subject will make focusing easier . 3 Focus the su bject.
47 1 Fully Automatic Shooting The focus confirmation light < o > blinks and focus is not achieved. Aim the AF point over an area having good contrast, then pr ess the shutter button halfway (p.202). If you are too close to the subject, move away and try again.
48 Depending on the scene, position the subjec t toward the left or right to create a balanced background and good perspective. In the < 1 > (Full Auto) mode, while you press the shutter button halfway to focus a still subject, t he focus will be locked.
49 In places where flash photogr aphy is prohibited, u se the < 7 > (Flash Off) mode. This mode is also effective for candlelight scenes when you want to capture the ambient light. If the numeric display in the viewfinder blinks, take care to prevent camera shake.
50 The < 2 > (Portrait) mode blurs the background to make the h uman subject stand out. It also makes flesh tones and the hair look softer than with the < 1 > (Full Auto) mode. The farther the distance between the subject and ba ckground, the better .
51 Use the < 3 > (Landscape) mode for wide scenery , night scenes, or to have everything in focus from near to far. The greens and blues also become more vivid and sharper than with < 1 > (Full Auto). With a zoom lens, use t he wide-angle end.
52 When you want to photograph flowers or small things up close, use the < 4 > (Close-up) mode. T o make small things appear much larger , use a macro lens (sold separately). Use a simple background . A simple background makes the flower , etc., stand out better .
53 T o photograph a moving subject, whet her it is a child running or a moving vehicle, use the < 5 > (Sport s) mode. Use a telephoto lens. Using a telephoto lens is recommend ed so you can shoot fr om afar . Use the center AF poin t to focus. Aim the center AF point over the subject, then press the shutter button halfway to auto focus.
54 T o shoot someone at night and obtain a natural-looking exp osure in the background, use the < 6 > (Night Portrait) mode. Use a wide-angle lens and a tripod. When using a zoom lens, use th e wide-angle end to obtain a wide night view . Also, use a tripod to prevent ca mera shake.
55 Basic Zone modes except < C > (Creative Auto) take care of everything, whereas the < C > Creative Auto mode enables you to easily change the picture’s brightness, depth of field, color tone (Picture S tyle), etc. The default settings are the same as the < 1 > (Full Auto) mode.
C Creative Auto Shooting 56 (1) Flash firing < a > (Auto flash), < D > (Flash on), or < b > (Flash off) can be selected. If you set < b > (Flash off), see “Disabling Flash” on page 49. (2) Blurring/sharpening t he background If you move the index mark toward the left, the background will look more blurred.
57 C Creative Auto Shooting (4) Image effects Besides the standard image effect, you can set it for portraits, landscapes, or black-and-white photos. (p.75 : Picture S tyle) < P > (S tandard): S tandard image effect applicable to most scenes. < Q > (Smooth skin tones): Effective for close-ups of women or children.
58 The easiest way to playback images is explained below. For more details on the playback procedure, see page 155. 1 Playback the image. When y ou press th e < x > button, the last captured image will be displayed. 2 Select the im age. T o view im ages starting with the last image, press the < Y > key .
59 3 Creative Shooting In the Basic Zone modes, to prevent spoiled shot s, most functions are set automatically and cannot be changed. In the < d > (Program AE) mode, you ca n set various functions and be more crea tive.
60 T o obtain a good exposure of the subject, the camera set s the exposure (shutter speed and aperture) automa tic ally . This is called Program AE. 1 Set the Mode Dial to < d >. 2 Focus the su bject. Look through the viewfinder and aim the selected AF point over the subject.
61 d : Program AE Change the ISO speed or use the built-in flash. T o match the subject and ambient lighting level, you can change the ISO speed (p.62) or use the built- in flash (p.64). In the < d > mode, the built-in flash will not fire aut omatically .
62 Set the ISO speed (image sensor ’s sensitivity to light) to suit the ambient light level. In the Basic Zone modes, the ISO speed is set automatically (p.63). 1 Press the < Z > button. ( 9 ) X [ ISO speed ] will appear. 2 Set the ISO speed. T ur n the < 6 > dial or press the < U > key to select the ISO speed.
63 Z : Changing the ISO Speed N If the ISO speed is set to “ AUTO ”, the actual ISO speed to be set will be displayed when you press the shutter button halfway . As indicated below , the ISO speed will be set automatically to suit the shooting mode.
64 In indoors, low light, or backlit c onditions in daylight, just pop up the built-in flash and press the shutter butto n to take flash pictures. In the < d > mode, the shutter speed (1/60 sec. - 1/200 sec.) will be se t automatically to prevent camera shake.
65 D Using the Built-in Flash If the subject is far away , increase th e ISO speed. By increasing the ISO speed, y ou can extend the flash range. In bright light, decrease the ISO speed. If the exp osure setti ng in the viewf inder bli nks, decrease t he ISO speed.
66 Y ou can select the AF mode suiting the shooting conditions or subject. In the Basic Zone modes, the optimum AF mode is set automat ically . 1 On the lens, set the focus mode switch to <AF>. 2 Press the < Z E > button. X [ AF mode ] will appear .
67 E : Changing the AF Mode N This AF mode is for movin g subjects when the focusing distance keeps changing. While you hold down the shu tter button halfway , the subject will be f ocused continuously . The exposure is set at the moment the picture is taken.
68 In the Basic Zone modes, all the AF points are active. Generally , the AF point covering the closest subject will be selected to focus. Therefore, the camera sometimes may not focus the subject you want. With the < d > (Program AE), < s >, < f >, and < a > modes, you can select one AF point to focus where you want.
69 S Selecting the AF Point N When shooting a portrait u p close, use One-Shot A F and focus the eyes. If you focus the eyes first, you can then recompose and the face will remain sharp. If it is difficult to focus, sel ect and use the cente r AF point.
70 Y ou can shoot up to about 3.7 shots per sec. This is effective for shooting a child running toward you or capturing the different facial expressions. 1 Press the < Y i Q > button. 2 Select < i >. Press the < U > key to select < i >, then press < 0 >.
71 1 Press the < Y i Q > button. 2 Select the self-timer . Press the < U > key to select the desired self-timer , then press < 0 >. Q : 10-sec. self-timer The remote control can also be used. (p.204) l : 2-sec. self-timer N (p.1 06) q : 10-sec.
72 Y ou can select the number of me gapixels to record (approx. 17.9, 8.0, or 4.5 megapixels) and the image quality . 1 Select [Quali ty]. Under the [ 1 ] tab, select [ Quality ], then press < 0 >. X [ Quality ] will appear. 2 Select the image- recording quality .
73 3 Setting the Image-recording Quality I want to select the image-recording quali ty matching the paper size for printing. Refer to the diagram on the left when choosing the image-recording quality . If you want to crop the image, selecting a higher quality (more pixels) such as 73 , 83 , 1 , or 1 + 73 is recommended.
3 Setting the Image-recording Quality 74 1 is the raw image data before it is made into 73 or other images. Although 1 images require sof tware like Digital Photo Professional (provided) so they can be displayed on the computer , they also offer flexibility for image adjustments possible only with 1 .
75 By selecting a Picture Style, y ou can obtain image ef fects matching your photographic expression or the subject. 1 Press the < X A > button. X [ Picture Style ] will appear . 2 Select a Picture Style. Press the < U > key to select a Picture S tyle, then press < 0 >.
A Selecting a Picture Style N 76 S Neutral This Picture S tyle is for users who prefer to process images w ith their computer . For natural colors and subdued images. U Faithfu l This Picture S tyle is for users who prefer to process images w ith their computer .
77 4 Advanced Shooting This chapter builds on the previous chapter and introduces more ways to shoot creatively . The first half of this chapter explains h ow to use the < s > < f > < a > < 8 > modes on the Mode Dial.
78 Y ou can either freeze the action or create motion blur with the < s > (Shutter-priority AE) mode on the Mode Dial. * < s > stands for T ime value. 1 Set the Mode Dial to < s >. 2 Set the desired shutter speed. See “Shooting Ti ps” for advice on setting the shutter speed.
79 s : Action Shots T o freeze the action or moving su bject. Use a fast shutter speed such as 1/4000 sec. to 1/500 sec. T o blur a running child or anim al giving the impression of fast movement. Use a medium shutter speed such as 1/250 sec. to 1/30 sec.
80 T o obtain a blurry background or to make everything near and fa r look sharp, set the Mode Dial to < f > (Aperture-priority AE) to ad just the depth of field (range of acceptable focus). * < f > st ands for Aperture value which is the si ze of the diaphragm hole inside the lens.
81 f : Changing the Depth of Field When using an apertu re with a high f-number, note that camera shake can occur in low light scenes. A higher aperture f-number will make the shutter speed slower. Under low light, the shutter speed can be as long as 30 sec.
f : Changing the Depth of Field 82 T o obtain a correct flash exposure, the flash output will be set automatically to match the set aperture (autoflash exposure). T he shutter speed will be set automatically between 1/200 sec. - 30 sec. to suit the scene’s brightness.
83 Y ou can set both the shutter speed and ape rture manually as desired. With flash, the flash exposure will be set automatically to match the aperture that was set. The flash sync speed can be set within 1/200 sec. to 1/30 sec. or to bulb. * < a > stands f or Manual.
a : Manual Exposure 84 In step 2 on the preceding page, turn the < 6 > dial to the left to set < BULB >. A bulb exposure keeps the shutter open for as long as you hold down the shutter button. It can be used to photograph fireworks, etc. The elapsed exposure time will be displayed on the LCD monitor .
85 Objects in the foreground and background will be in focus automatically . All the AF points will function to detect the subject, and the aperture required to attain the necessary depth of field will be set automatically . * < 8 > stand s for Auto-Depth of fie ld.
86 The metering mode measures the subj ect’s brightness to determine the correct exposure. Normally , evaluative metering is reco mmended. 1 Select [Metering mode]. Under the [ 2 ] tab, select [ Metering mode ], then press < 0 >. 2 Set the metering mode.
87 Set exposure compensation if the exposure (without flash) does not come out as desired. This f eature can be used in Creati ve Zone modes (except < a > ).
Setting Exposure Compensation N 88 Set flash exposure compensation if the flash exposure of the sub ject does not come out as desired. Y ou can set the flash exposure compensation up to ±2 stops in 1/3-stop increments. 1 Display the Quick Cont rol screen .
89 This feature takes exposure compensation a step further by varying the exposure automatically with three shots (±2 stops in 1/3-stop increments) as shown below . Y ou can then choose the best exposure. This is called AEB (Auto Exposure Bracketing).
3 Auto Exposure Bracketing N 90 Follow steps 1 and 2 to turn off the AEB amount display . The AEB setting will be canceled a utomatically if the power switch is set to < 2 >, flash recycling is complete, etc. Using AEB with c ontinuous shootin g.
91 Y ou can customize a Picture Style by adjusting individual parameters like [ Sharpness ] and [ Contrast ]. T o see the resulting effects, take test shots. T o customize [ Monochrome ], see page 93. 1 Select [Picture Style]. Under the [ 2 ] tab, select [ Picture Sty l e ], then press < 0 >.
A Customizing a Picture Style N 92 Sharpness Adjusts the sharpness of the image. T o make it less sharp, set it toward the E end. The closer it is to E , the softer the image will look. T o make it sharper , set it toward the F end. The closer it is to F , the sharper the image will look.
93 A Customizing a Picture Style N For Monochrome, you can also set [ Filter effect ] and [ T oning ef fect ] in addition to [ Sharpness ] and [ Contrast ] explained on the pre ceding page. k Filter Effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more.
94 Y ou can select a base Picture Style such as [ Portrait ] or [ Landscape ], adjust its parameters as des ired and register it under [ U ser Def. 1 ], [ User Def. 2 ], or [ User Def. 3 ]. Y ou can create Picture Styles whos e parameter settings such as for sharpness and contrast are different.
95 A Registering a Picture Style N 5 Select a parameter . Select a parameter such as [ Sharpness ], then press < 0 >. 6 Set the parameter . Press the < U > key to adjust the parameter as desired, then press < 0 >. For details, see “Customizing a Picture S tyle” on pages 91-93.
96 The color space refers to the range of reproducible color s. With this camera, you can set the color space to sRGB or Adobe RGB for captured images. For normal shoo ting, sRGB is recommended. In Basic Zone modes, sRGB is set automatically . 1 Select [Color space].
97 Use AE lock when the area of focus is to be dif ferent from the exposure metering area or wh en you want to take multiple shots at the same e xposure setting. Press the < A > button to lock the exposure, then recom pose and take the shot. This is called AE lock.
98 FE lock lock s the flash exposure sett ing over t he desired ar ea of the subject . This fea ture can a lso be used wit h a Canon EX-ser ies Speedlite.
99 White balance (WB) is for making the white areas look white. Normally , the < Q > (Auto) setting will obtain the correct white balance. If natural- looking colors cannot be obtained with < Q >, you can select the white balance to match the light source or set it manually by shooting a white object.
B : Setting the White Balance N 100 2 Select [Custom Wh ite Balance]. Under the [ 2 ] tab, select [ Custom White Balance ], then press < 0 >. X The custom white balance selection screen will appear . 3 Import the white balanc e data. Select the image that was captured in step 1, then press < 0 >.
101 Y ou can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter . Each color can be corrected to one of nine levels.
2 White Balance Correction N 102 With just one shot , three ima ges havi ng a different color balance can be recorded si multaneously . Based on the color temperatur e of the cur rent white balance setting, the image will be br ack eted with a blue/amber bias or magenta/green bias.
103 If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automat ically . With JPEG images, the correction is done when the image is captured. F or RA W images, it can be corrected with Digital Photo Professional (provided software).
104 Due to the lens characteristics, the fo ur corners of the picture might look darker . This is called le ns light fall-o ff or drop in peripheral illumination. With JPEG images, the correction is done when the image is captured. For RAW images, it can be corrected with Digit al Photo Professional (provided software).
105 3 Lens Peripheral Illumination Correction The camera already contains lens peripheral illumination corr ection data for approx. 25 lenses. In step 2, if you select [ Enable ], th e peripheral light correction will be applied auto matically for any lens whose correction data has been registered in the camera.
106 The camera’s mechanical shake caused by the reflex mirror action can blur images taken with a super tel ephoto lens or close-up (macro) lens. In such cases, mirror lockup is ef fective. Mirror lockup is enabled by sele cting the [ 7 Custom Functions (C.
107 5 Shooting with the LCD Monitor (Live View Shooting) Y ou can shoot while vie wing the image on the camera’s LCD monitor . Th is is called “Live View shooting.” Live View shooting is effective for still subjects which do not move. If you handhold the ca mera and shoot while viewing the LCD monitor , camera shake can cause blurred images.
108 1 Display the Live View image. Press the < A > button. X The Live View image will appear on the LCD monitor . The Live View image will closely reflect the brightness level of the actual image you capture. The image’s field of view is approx.
109 A Shooting with the LCD Monitor Under [ 6 Live View function settings ], set [ Live View shoot. ] to [ Enable ]. Battery Life with Live View Shooting [Approx. number of shots] The figures above are based on a fully-charged Battery Pa ck LP-E8 and CIP A (Camera & Imaging Produ cts Association) testing st andards.
110 A Shooting with the LCD Monitor Each time you press the < B > button, the information display will change. About the Information Display Magnifying frame ISO speed Exposure level indicator/ .
111 Function settings particular to Live View shooting are explained here. While the image is displayed on the LCD monitor , pressing the < Q > button will enable you to set the im age-reco rding quality , drive mode, and AF mode. In Creative Zone modes, you can also set the white balance, Picture S tyle, and Auto Lighting Optimizer .
112 Shooting Function Settings The menu options under the [ 6 ] tab’s [ Live View function settings ] menu are explained below . The functions settable in this menu screen only apply during Live View shooting. These functio ns do not take effect during viewfinder sho oting.
113 The AF modes available are [ Live mode ], [ u Live mo de ] (face detection, p.1 14), and [ Quick mode ] (p.1 18). If you want to achieve precise focus, set the lens focus mode switch to < MF >, magnify the image, and focus manually (p.120). Select the AF mode.
114 Using AF to Focus 3 Focus the su bject. Aim the AF point over the subject and press the shutter button half way . X When focus is achieved, the AF p oint will turn green and the beeper will sound. X If focus is not achieved, the AF point will turn orange.
115 Using AF to Focus 2 Focus the sub ject. Press the shutter button halfway and the camera will focus the face covered by the < p > frame. X When focus is achieved, the AF p oint will turn green and the beeper will sound. X If focus is not achieved, the AF point will turn orange.
116 Using AF to Focus AF operation Focusing will take slightly longer . Even when focus has been achieved, pressing the shutter button halfway will focus again.
117 Using AF to Focus Shooting conditi ons which can make focusin g difficult: Low-contrast subjects such as the blue sky a nd solid-color , flat surfaces. Subjects in low light. S tripes and other patterns where the re is contrast only in the horizontal direction.
118 Using AF to Focus The dedicated AF sensor is used to focus in the One-Shot AF mode (p.66), using the same AF method as with viewfinder shooting. Although you can focus the target area quickly , the Liv e View image will be interrupted momentarily during the AF operation .
119 Using AF to Focus 3 Focus the sub ject. Aim the AF point over the subject and press the shutter button halfw ay . X The Live View image will turn of f, the reflex mirror will go back down, and AF will be executed. X When focus is achieved, the beeper will sound and the Live View image will reappear .
120 Y ou can magnify the image and focus precisely ma nually . 1 Set the lens focus mode switch to <MF>. T urn the lens fo cusing ring to focus roughly . 2 Move the magnifying fra me. Press the < S > key to mo ve the magnifying frame to the position where you want to focus.
121 Notes About the L ive View Image Under low or bright light conditions, t he Live View image might not reflect the brightness of the captured image . If the light source within the image chang es, the screen might flicker . If this happens, stop and resume the Live View shoo ting under the actual light source to be used.
122 Notes About the Sh ooting Results When you shoot continuously with t he Live View functi on for a long period, the ca mera’s interna l temperature may increase and it can degrade image quality . T erminate Live View shooting when not shooting images.
123 6 Shooting Movies Set the Mode Dial to < k > to shoot movies. The movie recording format will be MOV . Cards which can record mo vies When shooting movies, use a larg e-capaci ty SD card rated SD Speed Class 6 “ ” or higher . If you use a slow-writing card w hen shootin g movies, the movie might not be recorded properly .
124 Connecting the camera to a TV set is recommended to playback movies (p.167, 169). 1 Set the Mode Dial to < k >. X The reflex mirror will make a sound, then the image will appear on the LCD monitor . 2 Focus the su bject. Before shooting a movie, autofocus or manual focus (p.
125 k Shooting Movies One continuous movie will be recorded as one file. During movie shooting, the top, bottom, le ft, and right part s of the screen will have a semi-transparent mask. The area enclosed by the semi- transpar ent mask will be the movie image that is recorded.
k Shooting Movies 126 Each time you press the < B > button, the information display will change. * Applies to a single movie clip. About the Information Display Movie shooting remaining time*/ E.
127 k Shooting Movies Y ou can manually set the shutter speed, aper ture, and ISO speed for movie shooting. Using manual expos ure to shoot movies is for advanced users. 1 Set the Mode Dial to < k >. X The reflex mirror will make a sound, then the image will appear on the LCD monitor .
k Shooting Movies 128 6 Focus and sho ot the movie. The procedure is the same as steps 2 and 3 for “Autoexposure Shooting” (p.124). With manual exposure shooting, AE lock and exposure compensation cannot be set.
129 k Shooting Movies While shooting a movie, you can also take a still photo by pressing the shutter button completely . T aking still photos during movi e shooting The still photo will record t he entire screen including the semi- transparent mask.
130 Function settings particular to movie shooting are explained here. While the image is displayed on the LCD monitor , pressing the < Q > button will enable you to set the white balance, Picture S tyle , Auto Lighting Optimizer , image-recor ding quality (for still photos), movie- recording size, and AF mode.
131 Shooting Function Settings [ n ] Menu Movie-recording size Y ou can select the movie’s image size [ ****x**** ] and frame rate [ 9 ] (frames recorded per second ). The 9 (frame rate) displayed on the [ Movie rec. size ] screen switches automatically depending on the [ 6 Video system ] setting.
Shooting Function Settings 132 T otal Movie Recording Time and File Size Per Minute AF mode The AF modes will be the same as described on pages 1 13-1 19. Y ou can select [ Live mode ], [ u Live mode ], or [ Quick mode ]. Note that continuous focusing of a movi ng subject is not possible.
133 Shooting Function Settings k Shutter/AE lock button Y ou can change the function assigned t o the AE lock button and to when you press the sh utter button halfway . • AF/AE lock: Normal function. Press the shutte r button halfway to execute AF .
Shooting Function Settings 134 [ o ] Menu Movie exposure Normally , set this option to [ Auto ]. Setting [ Movie exposure ] to [ Manual ] enables you to manually set the ISO speed, shutter speed, and aperture for movie shooting (p.127). Grid display With [ Grid 1 l ] or [ Grid 2 m ], you can display grid lines.
135 [ 2 Shootin g 2] Menu The functions settable in this menu screen only apply when the Mode Dial is set to < k >. These functions do not take effect in other shooting modes.
136 Notes on Movie Shoot ing Camera’ s internal temperature increase and image degradation If the camera’ s internal temperature becomes high, the < E > icon may appear on the screen. When not shoot ing, turn off the camera. If you take still photos while th e < E > icon is displayed on the screen, the image quality may be degraded.
137 7 Handy Features Silencing the Beeper (p.138) Card Reminder (p.138) Setting the Image Review Time (p.138) Setting the Auto Power-off T ime (p.139) Adjusting the LCD Monitor Brightness ( p.139) File Numbering Methods (p.140) Auto Rotation of V ertical Images (p.
138 Y ou can prevent the beeper from sounding when focus is achieved or during self-timer operation. Under the [ 1 ] tab, select [ Beep ], then press < 0 >. Select [ Disable ], then press < 0 >. This prevents shooting if there is no card in the camera.
139 Handy Features T o save battery power , the ca mera turns off automatically after the set time of idle operation elapses. Y ou can set this auto power-off time.
Handy Features 140 The file number is like the frame number on a roll of film. The captur ed images are assigned a sequential file number from 0001 to 9999 and saved in one folder . Y ou can change how the file number is assigned. The file number will appear on a computer in this format: IMG_0001.
141 Handy Features [Auto reset]: Resets the file numbering to 0001 when ever the card is replaced. Each time you replace the card, the file numbering restarts from 0001.
Handy Features 142 V ertical images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and computer instead of horizontally . The setting of this feature can be changed. Under the [ 5 ] tab, select [ Auto rotate ], then press < 0 >.
143 Handy Features While the menu is displayed, press the < B > button to display the camera’s major function settings. While the menu is displayed, press the < B > button to display the settings. Press the < B > button again to return to the menu.
Handy Features 144 This is for reverting all the camera’s shooting settings and Custom Functions to the default settings. This works in the < d > and other Creative Zone modes. 1 Select [Clear settings]. Under the [ 7 ] tab, select [ Clear settings ], then pre ss < 0 >.
145 Handy Features Shooting Settings Image-recording Settings AF mode One-Shot AF Quality 73 AF point selection Automatic selecti on Picture Sty le S tandard Metering mode q (Evaluative metering) Auto.
Handy Features 146 This prevents the display-off sensor from turning off the shooting settings display automatically w hen your eye nears the viewfinder eyepiece. Select [LCD auto off]. Under the [ 5 ] tab, select [ LCD auto off ], then press < 0 >.
147 The built-in flash and external Speedlite settings can be set with the menu. The [ External flash *** ] menu options for external Speedlites are applicable only to an attached EX-series Speedlite comp atible with the respective functions . The setting procedure is the same as setting a camera menu function.
3 Setting the Flash N 148 [Built-in flash func. settin g] and [External flash fu nc. setting] Settable Functions * Regarding [ FEB ] (Flash exposu re bracke ting), [ Z oom ], and [ Wireless set . ], refer to the S peedlite’s instruct ion manual. Flash mo de With an external S peedlite, you c an sele ct the flash mode to suit your flash shooting.
149 3 Setting the Flash N Flash exposure compen sation See “ y Flash Exposure Compensation” on page 88. E-TTL II For normal flash exposures, set it to [ Evaluat ive ]. If [ A verage ] is set, the flash exposure will be averaged for the entire metered scene as with an exte r nal metering flash.
150 Whenever you set the power switch to < 1 > or < 2 >, the Self Cleaning Sensor Unit operates to aut omatically sh ake off the dust on the front of the sensor . N ormally , you need not pay attention to this operation. However , you can execute t he sensor cleaning at anytime as well as disable it.
151 Normally , the Self Cleaning Sensor Unit will eliminate most of the dust that might be visible on captured images. However , in case visible dust still remains, you can append the Dust Delete Data to the image for erasing the dust spots later .
3 Appending Dust Delete Data N 152 3 Photogra ph a solid -white objec t. At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the viewfinder with a patternless, solid-white object and take a picture. X The picture will be taken in the aperture-priority AE mode with an aperture of f/22.
153 Dust which could not be removed by the automatic sen sor cleaning can be removed manually with a blower , etc. The surface of the image sensor is e xtremely delicate. If the sensor needs to be cleaned d irectly , h aving it done by a Canon Service Center is recommended.
3 Manual Sensor Cleaning N 154 While cleaning the sensor , never do any of the following. If the power is cut off, the shutter will close and the shutter curtains and image sensor might get damaged. • Setting the power switch to < 2 >. • Opening the batt ery comp artment cover .
155 8 Image Playback This chapter explains features related to viewing pho tos and movies, goin g into more detail than in Chapter 2 “Basic Shooting and Image Playback” which explain ed the playback procedure. Here you will find explanations about how to playback and erase photos and movies with the camera and viewing them on a TV se t.
156 Search for images quickly with the i ndex display showing fo ur or nine images on one screen. 1 Playback the image. When y ou press th e < x > button, the last captured image will be displayed. 2 Switch to the index display . Press the < I > button.
157 x Searching for Images Quickly With the single image display , you can turn the < 6 > dial to jump through the images. 1 Select the ju mp method. In the [ 4 Image jump w/ 6 ] menu, select the desired jump method from [ 1 image/10 images/100 images/ Date/Movies/Stills ], then press < 0 >.
158 Y ou can magnify a shot image by 1.5x to 10x on the LCD monitor. 1 Magnify the image. During image playback, press the < u > button. X The image will be magnified. If you hold down the < u > button, the image will continue to be magnified until it reaches the maximum magnification.
159 Y ou can rotate the displayed image to the desired orientation. 1 Select [R otate]. Under the [ 3 ] tab, select [ Rot at e ], then press < 0 >. 2 Select the im age. Press the < U > key to select the image to be rotated. Y ou can also select an image on the index display .
160 Basically , there are the following th ree ways to playback the movies you shot. Use the provided A V cable or an HDMI Cable HTC-100 (sold separately) to connect the camera to a TV set. Then you can playback the captured movies and photos on the TV .
161 k Enjoying Movies (See the PDF file instruction manual for ZoomBrowser EX/Ima geBrowser) The movie files recorded in the card can be transferred to a personal computer and played or edited with ZoomBrowser EX/ImageBrowser (provided software). Y ou can also extract a single frame from a movie and save it as a still photo.
162 1 Playback the image. Press the < x > button to display the image. 2 Select a movie. Press the < U > key to select a movie. With the single-image display , the < 1s > icon displayed on the upper left indicates that it is a movie.
163 k Playing Movies Function Playback Description 2 Exit Returns to the single- image display . 7 Play Pressing < 0 > toggles between play and stop. 8 Slow motion Adjust the slow motion speed by pressing the < U > key . The slow-motion speed is indicated on the upper righ t.
164 Y ou ca n edit out the fi rst and last scenes of a movie in 1-sec. in crements. 1 On the movie p layback screen , select [ X ]. X The editing screen wi ll be displayed. 2 Specify the p ar t to be edited out. Select either [ U ] (Cut beginning) or [ V ] (Cut end), then press < 0 >.
165 Y ou can playback the images in th e card as an automatic slide show . 1 Select [Slide show]. Under the [ 3 ] tab, select [ Slide show ], then press < 0 >. 2 Select the images to be played back. Press the < V > key to select the top menu item, then press < 0 >.
3 Slide Show (Auto Playback) 166 3 Set the play time and repeat opti on. Press the < V > key to select [ Set up ], then press < 0 >. For still photos, set the [ Display time ] and [ Repeat ] options, then press the < M > button. 4 St art the slide show.
167 Y ou can also view the still photos and movies on a TV set. Before connecting or disconnecting the cable between the camera and television, turn off the camera and television. * Adjust the movie’s sound volume with the TV set. * Depending on the TV set, p art of the image displayed might be cut off .
Viewing the Images on TV 168 For HDMI CEC TV sets When a TV set compatible with HDMI C EC* i s connected to th e camera with the HDMI cable, you can use the TV set’s remo te control for playback operations. * A function enabling you to control multiple HDMI devices with one remote control unit.
169 Viewing the Images on TV 1 Connect the provid ed A V cable to the camera. Connect the A V cable to the camera’s < / q C > terminal. With the plug’s < Canon > logo facing the back of the camera, insert it into the < / q C > terminal.
170 Protecting an image prevents it from being erased accidentally . 1 Select [Protect images]. Under the [ 3 ] tab, select [ Protect images ], then press < 0 >. X The protect setting screen will appear . 2 Select the image and protect it. Press the < U > key to select the image to be protected, then pre ss < 0 >.
171 Y ou can either select and erase images one by one or erase them in one batch. Protected images (p.170) will not be erased. Once an image is erase d, it cannot be recovere d. Make sure you no longer need the i mage before erasing it. T o prevent important images from being eras ed accidentally , pr otect them.
L Erasing Images 172 2 Select [Sele ct and erase images]. Select [ Select and erase images ], then press < 0 >. X The images will be displayed. T o display the th ree-image display , press the < I > button. T o return to the single-image display , press the < u > button.
173 When you press the < B > button during single-image playback, you can switch the shooting information display . The most detailed shooting information is shown below . About the Highlight Alert When the shooting information is di splayed, any overexposed areas of the image will blink.
B Shooting Information Display 174 About the Histogram The brightness histogram display shows the exposur e level distribution and overall brightness. The RGB histogram display is for checking the color saturation and gradation. The disp lay can be switched with the [ 4 Histogram ] menu.
175 9 Printing Images Printing (p.176) Y ou can connect the camera directly to a printer a nd print out the images in the card. The camera is compatible with “ w PictBridge” which is the standard for direct printing. Digit al Print Order Format (DPOF) (p.
176 The direct printing proced ure is done entirely with the camera while you look at the LCD monitor. 1 Set the camera’ s power switch to < 2 >. 2 Set up the printer . For details, see the printer ’s instruction manual. 3 Connecting the camera to a printer .
177 Preparing to Print 6 Playback the image. Press the < x > button. X The image will appear , and the < w > icon will appear on the upper left to indicate that the camera is connected to a printer . w PictBridge Movies cannot be printed. The camera cannot be u sed with printers comp atible only with CP Direct or Bubble Jet Direct.
178 The screen display and setting o ptions will differ depending on the printe r. Some settings might not be avai lable. For details, see the printer ’s instruction manual. 1 Select the im age to be printed. Check that the < w > icon is displayed on the upper left of the LCD monitor .
179 w Printing Select the size of the paper loaded in the printer , then press < 0 >. X The paper type screen will appear . Select the type of the paper loaded in the printer , then press < 0 >. When using a Canon printer and Canon paper , read the printer ’s instruction manual to check what paper types can be used.
w Printi ng 180 4 Set the printing effects. Set as necessary . If you need not set any printing effects, go to step 5. What is displayed on the screen differs depending on the printer . Select the option on the upper right (circled in the screenshot), then press < 0 >.
181 w Printing 5 Set the date and file number imprinting. Set as necessary . Select < I >, then press < 0 >. Set as desired, then press < 0 >. 6 Set the number of copies. Set as necessary . Select < R >, then press < 0 >.
w Printi ng 182 In step 4 on page 180, select the printing effect. When the < e > icon is displayed next to < z >, press the < B > button. Y ou can then adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4.
183 w Printing Y ou can crop the image and print on ly the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again. 1 On the print setting screen, select [T rimming].
w Printi ng 184 Depending on the print er , the trimmed image area might not be printed as you specified. The smaller you make the trimming frame, the grainier the picture will look on the pr int. While trimming the image, look at t he camera’s LCD monitor .
185 Y ou can set the print type, date impr inting, and file No. imprinting. The print settings will be applied to al l print-order ed images. (They cannot be set individually for each image.) 1 Select [Pri nt order]. Under the [ 3 ] tab, select [ Print order ], then press < 0 >.
W Digital Print Order Format (DPOF) 186 4 Exit the setting. Press the < 7 > button. X The print order screen will reappear. Next, select [ Sel.Image ] or [ All image ] to order the images to be printed. Print typ e K S tandard Prints one image on one sheet.
187 W Digital Print Order Format (DPOF) Sel.Image Select and order images one by one. T o display the three-image display , press the < I > button. T o return to the single-image display , press the < u > button. After completing the print order , press the < M > button to save the print order to the card.
188 With a PictBridge printer , you can easily print images with DPOF . 1 Prepare to print. See page 176. Follow the “Connecting the Camera to a Printer” procedure up to step 5. 2 Under the [ 3 ] ta b, select [Print order]. 3 Select [Print]. [ Print ] will be displayed only if th e camera is connected to the printer and printing is possible.
189 10 Customizing the Camera Y ou can customize various came ra features to suit your picture-taking preferences. Y ou can do it with Custo m Functions.
190 1 Select [Custom Functions (C.Fn)]. Under the [ 7 ] tab, select [ Custom Functions (C.Fn) ], th en press < 0 >. 2 Select the Custom Fun ction No. Press the < U > key to select the Custom Function No., then press < 0 >. 3 Change the setting as desir ed.
191 3 Setting Custom Functions N * The C.Fn I -1 setting will also be applied to movie shooting. Custom Functions C.Fn I: Exposure A LV s h o o t i n g 1 Exposure level increment s p.192 k 2 ISO expan sion k 3 Flash sync. speed in Av mode k C.Fn II: Image 4 Long exposure noise reduction p.
192 Custom Functions are organized into four groups based on the function type: C.Fn I: Exposure, C.Fn II: Image, C.Fn III: Autofocus/Drive, C .Fn IV : Operation/Others.
193 3 Custom Function Settings N C.Fn II: Image C.Fn-4 Long exposur e noise reducti on 0: Off 1: Auto For 1 sec. or lo nger exposure s, noise redu ction is perfo rmed automatica lly if noise typical of lon g exposures is detected. This [ Au to ] setting is effective in most case s.
3 Custom Function Settings N 194 C.Fn-6 Highlight tone prior ity 0: Disable 1: Enable Improves the highlight detail . The dynamic rang e is expanded from the standa rd 18% gray to bright high lights. The gradat ion between the grays and highli ghts becomes smoo ther .
195 3 Custom Function Settings N C.Fn-8 Mirror lo ckup 0: Disable 1: Enable Prevents camera vi brations caus ed by the refl ex mirror actio n which can disturb sho oting with supe r telephoto len ses or close- up (macro) shooting. See page 106 for the mirror locku p procedur e.
3 Custom Function Settings N 196 C.Fn-10 Assign SET button Y ou ca n assign a freq uently-used f unction to < 0 >. Press < 0 > when the camera is shooting-re ady . 0: Normal (d isabled) 1: Image qua lity Press < 0 > to display th e image-re cording quality sett ing screen on the LCD monitor.
197 3 Custom Function Settings N C.Fn-12 Add image verification da ta 0: Disable 1: Enable Data for verifying whether the im age is original or not is appende d to the image automat ically . When the shooting in formation of an i mage appended wit h the verifica tion data is displ ayed (p.
198 Under the My Menu tab, you can regi ster up to six men u options and Custom Functions whose settings you change frequently . 1 Select [My Menu settings]. Under the [ 9 ] tab, select [ My Menu settings ], then pre ss < 0 >. 2 Select [Register to My Menu].
199 When you set the copyright inform ation, it will be appended to the image as Exif information. 1 Select [C opyright informa tion]. Under the [ 7 ] tab, select [ Copyright information ], then press < 0 >.
3 Setting Copyright Information N 200 Changing the entry area Press the < Q > button to toggle between the top and bottom entry areas. Moving the cursor Press the < U > key to move the cursor . Entering text In the bottom area, press the < S > key to select a character, then press < 0 > to enter it.
201 11 Reference This chapter provides reference information for camera features, system accessories, etc. The back of this chapter also has an index to make it easier to look up needed information.
202 Autofocus can fail to achieve fo cus (the focus confirmation light < o > blinks) with certain subjec ts such as the following: Subjects difficult to focus V ery low-contrast subjects (Example: Blue sky , solid-color walls, etc.
203 With the AC Adapter Kit ACK-E8 (sol d separately), you can connect the camera to a household power outlet and not worry about the battery level. 1 Connect the power cord. Connect the power cord as shown in the illustration. After using the camera, unplug the power plug from the power outlet.
204 This remote controller enables you to take pictures wirelessly up to about 5 meters/16.4 feet from the camera. Y ou can either shoot immediately or use a 2-sec. delay . Set the self-timer to < Q > (p.71). Point the remote controller toward the camera’s remote control sensor and press the transmit button.
205 Remote Control Shooting This remote switch has a 60 cm/2.0 fe et cord and enables you to press the shutter button halfway or co mpletely . It connects to the camera’s remote control terminal. If you take a picture without looking at the viewfinder , light entering the eyepiece can throw off the exposure.
206 Basically operates like a built-in f lash for easy operation. When an EX-series Speedlite (sold sep arately) is attached to the camera, almost all the autoflash control is done by the camer a. In other words, it is like a high-output flas h attached externally in place of the built-in flash.
207 External Speedlites With an EZ/E/EG/ML/TL-series Speedlite set in TTL or A-TT L autoflash mode, the fla sh can be fired at full ou tput only . Set the camera’s shooting mode to < a > (manual exposure) or < f > (aperture-priority AE) and adjust the aperture setting before shooting.
208 With a commercially-available Eye-Fi card already set up, you can automatically transfer captured im ages to a person al computer or upload them to an online service via a wireless LAN.
209 Using Eye-Fi Cards 5 Check the [Access point SSID:]. Check that an access point is displayed for [ Access point SSID : ]. Y ou can also check the Eye-Fi card’s MAC address and firmware version. Press the < M > button three times to exit the menu.
210 o : Set automaticall y k : User selectable : Not selectable Functi on Availa bility Table acc ording to Shoot ing Modes k k k o o o o k o o o o k k k o o o o k o o o o k k k o o o o k o o o o k k .
211 Function Availability Table according to Shooting Modes *1: For manual exposure only . *2: Refers to “(2) Blurring/ sharpening the background” functi on on page 56. *3: Refers to “(3) Adjusting the pict ure brightness” function on p age 56.
212 1 Shooting 1 (Red) Page 2 Shooting 2 (Red) Menu Settings Quality 73 / 83 / 74 / 84 / 76 / 86 / 1 + 73 / 1 72 Beep Enable / Disable 138 Release shutter without card Enable / Disable 138 Image review Off / 2 sec.
213 Menu Settings y Shooting 3 (Red) Page 3 Playback 1 (Blue) 4 Playback 2 (Blue) 5 Set-up 1 (Y ellow) * Displayed only when an Eye-Fi card is used. Dust Delete Dat a Obtains data t o be used to erase dust spots 151 ISO Auto Max. 400 / Max. 800 / Max.
Menu Settings 214 6 Set-up 2 (Y ellow) Page 7 Set-up 3 (Y ellow) 9 My Menu (Green) LCD brightness Seven brightness leve ls provided 139 Date/Time Set th e date (year , month, day) and time (hour , min.
215 Menu Settings n Movie 1 (Red) Page o Movie 2 (Red) * Displayed only when [ Movie exposure ] is se t to [ Manual ]. Movie Shooting Mode Menu Movie recording size 1920x1080 ( 6 / 5 / 4 ) / 1280x720 .
216 System Map Eyecup Ef Rubber Frame Ef Eyepiece Extender EP-EX15 ll Angle Finder C E-series Dioptric Adjustment Lenses Wide Strap EW-100DB lll 270EX ST -E2 430EX II 580EX II Macro Ring Lite MR-14EX .
217 System Map EF-S lenses EF lenses Remote Switch RS-60E3 Remote Controller RC-6 TV/Video Interface Cable Stereo A V Cable A VC-DC400ST EOS DIGIT AL Solution Disk EOS DIGIT AL Software Instruction Ma.
218 If a problem occurs, first refer to this Troubleshooting Guide. If this T roubleshooting Guide does not reso lve the problem, contact your dealer or nearest Canon Service Center. Do not rech arge any battery p ack othe r than a genu ine Canon Battery Pack LP-E8.
219 Troubleshooting Guide Use a full y-charged battery p ack (p.24). The recharge able batter y pack performance wil l degrade over repeated use. Purcha se a new one. If you use Live V iew shooting or shoo t movies for a prolon ged peri od (p.107, 123 ), the number of po ssible shots wil l decrease.
Troubleshooting Guide 220 If a card error mess age is displaye d, see page 42 or 224. Set the [ 7 Cust om Functions (C.Fn) ] menu’s [ High ISO speed noise reduction ] to [ Standa rd ], [ Low ], or [ Disable ]. If it is set to [ Str on g ], the maxi mum burst during cont inuous shooting will greatly decrease ( p.
221 Troubleshooting Guide If you shoot continuousl y with the built -in flash at sh ort interva ls, the flash might stop operating to prot ect the flash unit. The built-in flash’s pop-up mecha nism moves slig htly . This is no rmal. If you use flas h, the shutt er will make two so unds each time you shoot (p.
Troubleshooting Guide 222 If the LCD monito r is dirty , use a so ft cloth to clean it . In low or high temper atures, the LCD mo nitor display may se em slow or might look blac k. It will return to norma l at room temperat ure. In Basic Zon e modes and in movie sh ooting mo de, cert ain t a bs and menu option s are no t displayed .
223 Troubleshooting Guide The correct d ate and time has not been set (p.2 9). Make sure the A V c able or HDMI c able’s plug is inser ted all the way i n (p.167, 169) . Set the video OUT sy stem (NTSC/P AL) to the same video sy stem as the TV se t (p.
224 If there is a problem with the ca mera, an error message will appear . Follow the on- screen instructions. * If the error still persist s, write down the error No. and cont act your nearest Canon Service Center . Error Codes No. Error Message & Solution 01 Communications between the camera and lens is faulty .
225 •T y p e T ype: Digit al, single-lens reflex, AF/AE camera wit h built-in flash Recording media: SD memory card, SDHC memory card, SDXC memory card Image sensor size: 22.3 x 14.9 mm Compatible lenses: Canon EF lens es (including EF-S lenses) (35mm-equivalent foca l length is approx.
Specifications 226 • Viewfinder T ype: Eye-level pent amirror Coverage: Vertical/ Horizontal approx. 95% Magnification: Approx. 0.87x (-1 m -1 with 50mm lens at infinity) Eye point: Approx. 19 mm (From eyepiece lens center at -1 m -1 ) Built-in dioptric adjustm ent : -3.
227 Specifications •S h u t t e r T ype: Electro nically-controlled, focal-plan e shutter Shutter speeds: 1/4000 sec. to 1/60 s ec. (Full Auto mode), X-sy nc at 1/200 sec. 1/4000 sec. to 30 sec., bulb (T otal shutter speed range. Available range varie s by shooting mode.
Specifications 228 • Movie Shooting Movie compression: MPEG-4 A VC/H. 264 V ariable (ave rage) bit rat e Audio recording format: Linear PCM Recording format: MOV Recording size and frame rate: 1920x1080 (Full HD) : 30p/25p/24p 1280x720 (HD) : 60p/50p 640x480 (SD) : 60p/50p Crop 640x480 (SD) : 60p/50p * 30p: 29.
229 Specifications •I m a g e P l a y b a c k Image display formats: Single image, Single image + Info (Basic info, det ailed info, histogram), 4-image index, 9-image index, image rotate possible Zoom magnification: Approx.
Specifications 230 • Dimensi ons and Weight Dimensions (W x H x D) : 128.8 x 97.5 x 75.3 mm / 5.1 x 3.8 x 3.0 in. Weight: Approx. 530 g / 18.7 oz. (CIP A testing standards) Approx.
231 Specifications • EF-S 1 8-55mm f/3.5-5. 6 IS Angle of view: Diagonal extent: 74°20’ - 27°50’ Horizont al extent: 64 °30’ - 23°20’ V ertical extent: 45°30’ - 15°40’ Lens construction: 1 1 elements in 9 group s Minimum aperture: f/22 - 36 Closest focusin g distance : 0.
232 T rademarks Adobe is a trademark of Adobe Systems I ncorporated. Windows is a trademark or registered tra demark of Microsof t Corporation in the United S tates and other countries. Macintosh and Mac OS are trademarks or registered trad emarks of Apple Inc.
233 Safety Warnings Follow these safeguards and use the equip ment properly to prevent injury , death, and material damage . Preventing Serious Injury or Death • T o prevent fire, excessive heat, ch.
234 • If you dro p the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock. • Do not disasse mble or modify the equipment. High-voltage internal parts can cause electrical shock.
235 European Union (and EEA) only . These symbols indicate that this product is not t o be disposed of with your househ old waste, according to the WEEE Directive (2002/96/ EC), the Battery Directive (2006/66/EC) and/o r your national laws implement ing those Directives.
236.
237 1280x720 ... .......... .............. ........... 131 1920x108 0 ........... ........... ............. .13 1 1st-curtain sync .... ........... ............. . 148 2nd-curtain syn c... .............. ........... 148 2-sec. self-time r ......... ..
238 Index Copyright information ......... ........... 199 Creative Au to ............. .............. ....... 5 5 Creative Zone modes ............... ...... 20 Custom Functio ns . ............. ........... 190 Clear all ............... ............. .
239 Index Function availability table ..... ......... 210 G Grid display ... ............. ........... 112, 134 H HDMI ..... ............. ............. ...... 160, 167 HDMI CEC (High-Definition Multimedi a Interface Consumer Electronics Control) ....
240 Index Live View shoot ing ........ ........... ..... 107 Focusing ... ................ ............. ... 113 Grid display ......... ............. ........ 112 Possible sh ots .. ........... ............. 109 Long exposures → Bulb Low level form at.
241 Index Paper set tings (printing ) ....... ......... 178 Partial mete ring .... .............. ............. 86 Peripheral il lumination correction ... 104 PictBridge... .......... .............. ........... 175 Picture S t yle Adjustment .........
242 Index Shooting m ode.... .......... ............. ..... 20 A-DEP (Automatic dep th-of-field AE) ..... 85 M (Manual e xposure) .......... ....... 8 3 Av (Aperture-pr iority AE) ..... ....... 80 Tv (Shutter-prio rity AE) ............. .. 78 P (Progr am AE) .
243 Quick Reference Guide Menu Operations - - - - - - - - - - - - - - - - - - - - - p.244 Q Quick Control Screen - - - - - - - - - - - - - - - p.245 Image-recording Quality - - - - - - - - - - - - - - - - p.246 Picture S tyle - - - - - - - - - - - - - - - - - - - - - - - - p.
244 Quick Reference Guide < M > button LCD monitor < S > Cross keys < 0 > button Creative Zone Modes Basic Zone Modes Movie Shooting Mode Menu Operations Ta b Menu settings Menu items 1. Press the < M > button to display the menu.
245 Quick Reference Guide Q Quick Control Screen Shutter speed Aperture ISO speed Auto Lighting Optimizer Highlight tone priority Shooting mode Exposure compensation/ AEB setting Flash exposure compen.
Quick Reference Guide 246 Select [ 1 Quality ], then press < 0 >. Press the < U > key to select the quality , then press < 0 >. Image-recording Quality Image-recording quality Pixels Possible shots A Picture Style N Press the < X A > button.
247 Quick Reference Guide Access lamp < O > Aperture/Exposure compensation button Display-off sensor < A > Live View shooting/ Movie shooting button < S > AF point selection button &.
Quick Reference Guide 248 Aperture ISO speed Shutter speed Possible shots White balance Auto Lighting Optimizer Metering mode Shooting mode Drive mode Exposure level indicator AF mode Battery check zx.
249 Quick Reference Guide Basic Zone Modes D Using the Built-in Flash Creative Zone Modes (Displayed only when < C > is set.) All the settings necessary for shooting are set automatically . Y ou just press the shutter button, and the camera does the rest.
Quick Reference Guide 250 Creative Zone Modes d : Program AE s : Shutter-priority AE f : Aperture-priority AE Y ou can change the camera settings as desired to shoot in various ways. The camera automatically sets the shutter speed and aperture in the same way as the < 1 > mode.
251 Quick Reference Guide S AF Point N E : AF Mode N Set the lens focus mode switch to < f >. Press the < Z E > button. Press the < U > key to select the AF mode, then press < 0 >.
Quick Reference Guide 252 Z : ISO Speed N i Drive Mode N Press the < Z > button. T urn the < 6 > dial or press the < U > key to select the ISO speed. When “ AUTO ” is selected, the ISO speed is set automatically . When you press the shutter button halfway , the ISO speed setting will be displayed.
253 Quick Reference Guide A Live View Shooting Press the < A > button to display the Live View image. Press the shutter button halfway to focus. Press the shutter button completely to take the picture. T o change the Live View settings, use the [ 6 Live V iew function settings ] menu.
Quick Reference Guide 254 k Shooting Movies Custom Functions N Set the Mode Dial to < k >. Press the shutter button halfway to focus. Press the < A > button to start shooting a movie. T o stop movie shooting, press < A > again.
255 Quick Reference Guide Image Playback Magnify Index yu yu B Erase Playback x L Select image S Shooting information.
256 EOS DIGITAL Solution Disk This disk contains various software for EOS DIGIT A L. Communication Software for the Camera and Computer Y ou can download images ( still images/ movies) y ou have s hot with th e camera to yo ur comput er . Y ou c an set the variou s settings of the camera from your computer.
257 Compatible OS 1 Check that the camera is not conne cted to your computer . 2 Insert the EOS DIGIT AL Solution Disk (CD). 3 Click [Easy Inst allation] to start installation. Follow the windows displa yed for the rest of the installation procedure. B When installation ends, the window for S tep 4 appears.
258 Compatible OS 1 Check that the camera is not conne cted to your computer . 2 Insert the EOS DIGIT AL Solution Disk (CD). On your computer ’s desktop, double-click and open the CD-ROM icon, and then double-click [Cano n EOS Digital Installer]. 3 Click [Inst all] to start inst alla tion.
259 [ WINDOWS ] EOS DIGITAL Software In struction Manuals Disk Copy the PDF In struction Man uals contain e d on the CD to your computer . 1 Insert the EOS DIGIT AL Software Instruction Manuals Disk (CD) into the CD-ROM drive of your comput er . 2 Open the CD.
This Instruction Manual booklet is current as of January 2010. For information on the camera’s compatibility with any accessories and lenses introduced after this date, contact any Canon Service Center . CEL-SP4EA210 © CANON INC. 2010 PRINTED IN THE EU CANON INC.
デバイスCanon 550Dの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Canon 550Dをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCanon 550Dの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Canon 550Dの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Canon 550Dで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Canon 550Dを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCanon 550Dの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Canon 550Dに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCanon 550Dデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
