Canonメーカー600Dの使用説明書/サービス説明書
ページ先へ移動 of 110
m 0 Canon Z ".
Advanced Shooting This chapter builds on Chapter 3 and introduces more ways to shoot creatively. ®_The first half of this chapter explains how to use the <Tv >, <Av>, <M>, and <AoDFP> modes on the Mode Dial. _ All the functions explained in Chapter 3 can also be used in the <Tv>, <Av>, and <M> modes.
Tv" Action Shots You can either freeze the action or create motion blur with the <Tv> (Shutter-priority AE) mode on the Mode Dial. * < Tv > stands for Time value. Blurred motion Frozen action (Slow shutter speed: 1/30 sec.) (Fast shutter speed: 1/2000 sec.
Tv: Action Shots _.'-Shooting Tips ®_To freeze the action or moving subject. Use a fast shutter speed such as 1/4000 sec. to 1/500 sec. _ To blur a running child or animal giving the impression of fast movement. Use a medium shutter speed such as 1/250 sec.
Av" Changing the Depth of Field _J_ To blur the background or to make everything near and far look sharp, set the Mode Dial to <Av> (Aperture-priority AE) to adjust the depth of field (range of acceptable focus). * <Av > stands for Aperture value whichis the size of the diaphragm hole inside the tens.
Av : Changing the Depth of Field shooti.g Tip ®_When using an aperture with a high f/number, note that camera shake can occur in low light scenes. A higher aperture f/number will make the shutter speed slower. Under low light, the shutter speed can be as long as 30 sec.
AV : Changing the Depth of Field Using the Built'in Flash To obtain a correct flash exposure, the flash output will be set automatically to match the set aperture (autoflash exposure). The shutter speed wiii be set automatically between 1/200 sec.
M" Manual Exposure You can set both the shutter speed and aperture manually as desired. While referring to the exposure level indicator in the viewfinder, you can set the exposure as desired. This method is called manual exposure. * <M> stands for Manual.
M: Manual Exposure _ Using the Built'in Flash To obtain a correct flash exposure, the flash output wiii be set automatically (autoflash exposure) to match the manually-set aperture. The flash sync speed can be set from 1/200 sec. to 30 sec. and bulb.
A-DEP: Automatic Depth=of=Field AE Objects in the foreground and background will be in focus automatically. All the AF points will function to detect the subject, and the aperture required to attain the necessary depth of field wiii be set automatically.
C_=I Changing the Metering Mode _ Four methods (metering modes) to measure the subject's brightness are provided. Normally, evaluative metering is recommended. In Basic Zone modes, evaluative metering is set automatically. _'_ Select [Metering mode].
Setting Exposure Compensation _ Av[] Setting Exposure Compensation Set exposure compensation if the exposure (without flash) does not come out as desired. This feature can be used in Creative Zone modes (except <M>). You can set the exposure compensation up to +5 stops in 1/3-stop increments.
Setting Exposure Compensation* Flash Exposure Compensation Set flash exposure compensation if the flash exposure of the subject does not come out as desired. You can set the flash exposure compensation up to _+2 stops in 1/3-stop increments. _'_ Press the <l_> button.
Auto Exposure Bracketing _ This feature takes exposure compensation a step further by varying the exposure automatically (up to _+2 stops in 1/3-stop increments) with three shots as shown below. You can then choose the best exposure. This is called AEB (Auto Exposure Bracketing).
Auto Exposure Bracketing* Canceling AEB ® Follow steps 1 and 2 to turn off the AEB amount display. ® The AEB setting will also be canceled automatically if the power switch is set to <OFF>, flash recycling is completed, etc. _;_ Shooting Tips ® Using AEB with continuous shooting: If <D__4J> continuous shooting (p.
=X = Locking the E×posure _ You can lock the exposure when the area of focus is to be different from the exposure metering area or when you want to take multiple shots at the same exposure setting. Press the <=X- > button to lock the exposure, then recompose and take the shot.
=)(- Locking the Flash E×posure _ if the subject is on the side of the frame and you use flash, the subject may turn out to be too bright or dark depending on the background, etc. This is when you should use FE lock. After setting the proper flash exposure for the subject, you can recompose (put the subject toward the side) and shoot.
Correcting the Brightness and Contrast Automatically _ _ If the image comes out dark or the contrast is low, the brightness and contrast can be corrected automatically. This feature is called Auto Lighting Optimizer. The default setting is [Standard].
Correcting the image's Dark Corners _ Due to the lens characteristics, the four corners of the picture might look darker. This phenomenon is called lens light faIFoff or drop in peripheral illumination and can be corrected automatically. The default setting is [Enable].
Correcting the Image's Dark Corners About the Lens Correction Data The camera already contains lens peripheral illumination correction data for approx. 25 lenses. In step 2, if you select [Enable], the peripheral light correction will be applied automatically for any lens whose correction data has been registered in the camera.
_=~ Customizing image Characteristics* _ You can customize a Picture Style by adjusting individual parameters fike [Sharpness] and [Contrast]. To see the resulting effects, take test shots. To customize [Monochrome], see page 114. _ Press the < T ;:,_ > button.
_:_, Customizing Image Characteristics* Parameter Settings and Effects Sharpness Adjusts the sharpness of the image. To make it less sharp, set it toward the [] end. The closer it is to [], the softer the image will look. To make it sharper, set it toward the [] end.
,_-'_ Customizing Image Characteristics* Monochrome Adjustment For Monochrome, you can also set [Filter effect] and [Toning effect] in addition to [Sharpness] and [Contrast] explained on the preceding page. _) Filter Effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more.
_,_, RegisteringPreferred image Characteristics _ _ You can select a base Picture Style such as [Portrait] or [Landscape], adjust its parameters as desired and register it under [User Def. 1], [User Def. 2], or [User Def. 3]. You can create Picture Styles whose parameter settings such as sharpness and contrast are different.
•_:,_ Registering Preferred Image Characteristics* _ elect a parameter. _ Select a parameter such as [Sharpness], then press <_-_>. Set the parameter. _ Press the <41_ > key to adjust the parameter as desired, then press <_>. For details, see "Customizing Image Characteristics" on pages 112-114.
WB : Matching the Light Source _ The function adjusting the coHor tone so that white objects Hook white in the picture is caHHed white baHance (WB). NormaHHy, the <_> (Auto) setting wHH obtain the correct white baHance.
WB: Matching the Light Source _ Select [Custom White Balance]. ® Under the [t_:] tab, select [Custom White Balance], then press <_-_>. _y,, The custom white balance selection screen will appear. _._ import the white balance data. ® Select the image that was captured in step 1, then press <__>.
wB Adjusting the Color Tone for the Light Source _ _ ÷/= You can correct the white balance that has been set. This adjustment will have the same effect as using a commercially-available color temperature conversion filter or color compensating filter.
_e Adjusting the Color Tone for the Light Source _ White Balance Auto Bracketing With just one shot, three images having a different color balance can be recorded simultaneously. Based on the color temperature of the current white balance setting, the image will be bracketed with a blue/amber bias or magenta/green bias.
Setting the Color Reproduction Range _ The range of reproducible colors is called the color space. With this camera, you can set the color space to sRGB or Adobe RGB for captured images. For normal shooting, sRGB is recommended. in Basic Zone modes, sRGB is set automatically.
Mirror Lock=up to Reduce Camera Shake* _ The camera's mechanical shake caused by the reflex mirror action can blur images taken with a super telephoto lens or close-up (macro) lens. in such cases, mirror Iockup is effective. Mirror Iockup is enabled by setting [8: Mirror Iockup] to [1: Enable] in the [_'_ Custom Functions (C.
Shooting with the LCD Monitor (Live View Shooting) You can shoot while viewing the image on the camera's LCD monitor. This is called "Live View shooting". Live View shooting is effective for still subjects which do not move. If you handhold the camera and shoot while viewing the LCD monitor, camera shake can cause blurred images.
Shooting with the LCD Monitor __ ,"_ Display the Live View image. ® Press the <r_> button. _y,, The Live View image will appear on the LCD monitor. _ The Live View image will closely reflect the brightness level of the actual image you capture.
I:_ Shooting with the LCD Monitor Enabling Live View Shooting Set [Live View shoot.] to [Enable]. In Basic Zone modes, [Live View shoot.] will be displayed under [t_-'], and in Creative Zone modes, it will be displayed under [_i]. Battery Life with Live View Shooting [Approx.
_lm Shooting with the LCD Monitor About the information Display _ Each time you press the <iNFO.>button, the information display wiii change. AF mode _AF • AF_ : Live mode / H • AF _ : Face .
I:_ Shooting with the LCD Monitor Final I_age Simulation The final image simulation reflects the effects of the Picture Style, white balance, etc., in the Live View image so you can see what the captured image will look like. During shooting, the Live View image will automatically reflect the function settings listed below.
Shooting Function Settings Function settings particular to Live View shooting are explained here. [] Quick Control While the image is displayed on the LCD monitor in Creative Zone modes, pressing the .
_i Menu Function Settings The menu options below are displayed. in Basic Zone modes, the Live View menu options wiii be displayed under [t_-'], and in Creative Zone modes, they wiii be displayed under [t_i]. ®_ Live View shooting You can set Live View shooting to [Enable] or [Disable].
t_i Menu Function Settings 3:2 4:3 16:9 1:1 L 5184x3456 4608x3456 5184x2912" 3456x3456 I_ (18.0 megapixels) (16.0 megapixels) (15.1 megapixels) (11.9 megapixels) M 3456x2304 3072x2304 3456xl 944 2304x2304 (8.0 megapixels) (7.0 megapixels) (6.7 megapixels) (5.
Changing the Autofocus Mode Selecting the AF Mode The AF modes available are (Live mode], [_ Live mode] (face detection, p. 132), and [Quick mode] (p.136). If you want to achieve precise focus, set the lens focus mode switch to <MF>, magnify the image, and focus manually (p.
Changing the Autofocus Mode _ Focus the subject. ® Aim the AF point over the subject and press the shutter button halfway. _y,, When focus is achieved, the AF point will turn green and the beeper will sound. _y,, If focus is not achieved, the AF point will turn orange.
Changing the Autofocus Mode _/_, Focus the subject. _ Press the shutter button halfway and the camera will focus the face covered by the <_ _> frame. _y,, When focus is achieved, the AF point will turn green and the beeper will sound. _y,, If focus is not achieved, the AF point will turn orange.
Changing the Autofocus Mode Live Mode and _ (Face Detection)Live Mode Notes AF operation ® Focusing wiii take slightly longer. @ Even when focus has been achieved, pressing the shutter button halfway wiii focus again. @ The image brightness may change during and after the AF operation.
Changing the Autofocus Mode Shooting conditions which can make focusing difficult: ® Low-contrast subjects such as the blue sky and solid-color, flat surfaces. ® Subjects in low light. ® Stripes and other patterns where there is contrast only in the horizontal direction.
Changing the Autofocus Mode Quick Mode: AF_ The dedicated AF sensor is used to focus in One-Shot AF mode (p.83), using the same AF method as with viewfinder shooting. Although you can focus the target area quickly, the Live View image will be interrupted momentarily during the AF operation.
Changing the Autofocus Mode _ Focus the subject. ® Aim the AF point over the subject and press the shutter button halfway. _y,, The Live View image will turn off, the reflex mirror will go back down, and AF will be executed. _y,, When focus is achieved, the AF point which achieved focus will turn green and the Live View image will reappear.
MF: Focusing Manually You can magnify the image and focus precisely manually. 4_ Set the lens focus mode switch to r_ <MF>. _ Turn the lens focusing ring to focus roughly. Magnifying frame 2 ,3 AE lock Magnified area position Magnification _ Move the magnifying frame.
Live View Shooting Cautions White <B> and Red <_J> internal Temperature Warning icons if the camera's internal temperature increases due to prolonged Live View shooting ora high ambient temperature, a white <B> icon will appear.
O Live View Shooting Cautions Shooting Result Cautions When you shoot continuously with the Live View function for a long period, the camera's internal temperature may increase and it can degrade image quality. Terminate Live View shooting when not shooting images.
Shooting Movies Set the Mode Dial to <%_,> to shoot movies. The movie recording format will be MOV. Cards which can record movies When shooting movies, use a large-capacity SD card rated SD Speed Class 6 "P__.ABS_," or higher. If you use a slow-writing card when shooting movies, the movie might not be recorded properly.
=l,, Shooting Movies Connecting the camera to a TV set is recommended to playback the movies shot (p.218, 221). Autoexposure Shooting Set the Mode Dial to <=,_,>. _y,, The reflex mirror will make a sound, then the image will appear on the LCD monitor.
_,_, Shooting Movies U During movie shooting, do not point the lens toward the sun The sun's heat can damage the camera's internal corrponents. Cautions for movie shooting are on pages 163 and 164. if necessary, also read the Live View shooting cautions on pages 139 and 140.
_,lm Shooting Movies Manual Exposure Shooting You can manually set the shutter speed, aperture, and ISO speed for movie shooting. Using manual exposure to shoot movies is for advanced users. Set the Mode Dial to <=_>. _y,, The reflex mirror will make a sound, then the image will appear on the LCD monitor.
_ Shooting Movies _ Focus and shoot the movie. _ The procedure is the same as steps 2 and 3 for "Autoexposure Shooting" (p.142). AE lock and exposure compensation cannot be set, Changing the.
_ Shooting Movies AF mode • AF_rt_ : Live mode • AF_ : Face detection Live mode • AF_ : Quick mode Movie shootinc mode About the information Display _ Each time you press the <iNFO.> button, the information display wiii change. ..... Picture Style .
_,_, Shooting Movies F_3 L_ Notes for Both Autoexposure and Manual Exposure Shooting A movie file is recorded each time you shoot a movie. The image's field of view is approx. 99%. The sound will be recorded by the camera's built-in monaural microphone (p.
_ Shooting Movies Shooting Still Photos While shooting a movie, you can also take a still photo by pressing the shutter button completely. Shooting Stills in the <Din> Mode _ If you take a still photo during movie shooting, the movie will record a still moment lasting approx.
Shooting Function Settings Function settings particular to movie shooting are explained here. [] Quick Control While the image is displayed on the LCD monitor, you can press the <[_> button to s.
Setting the Movie=recording Size Under the [_,_,:] tab, [Movie rec. size] enables you to select the movie's image size [****x .... ] and frame rate [#,] (frames recorded per second). The #, (frame rate) switches automatically depending on the [_= Video system] setting.
Setting the Movie-recording Size Total Movie Recording Time and File Size Per Minute Due to limitations of the file system, movie shooting will stop automatically if the file size of a single movie clip reaches 4GB. To resume movie shooting, press the < [_!i > button.
Using Movie Digital Zoom When the image size is set to [1920x1080] (Fuji HD), you can shoot with an approx. 3x to lOx digital zoom. i Select [1920x1080 1_,]. _ Under the [1_,_, =] tab, set [Movie rec. size] to [1920x1080 _] by turning the <_> dial Set the digital zoom.
Taking Video Snapshots You can easily create a short movie with the video snapshot function. A video snapshot is a short movie clip lasting 2 sec., 4 sec., or 8 sec. A collection of video snapshots is called a video snapshot album and can be saved to the card as a single movie file.
Taking Video Snapshots Creating a Video Snapshot Album Shooting duration Shoot the first video snapshot. ® Press the <E_II> button to shoot. _y,, The blue bars indicating the shooting duration will gradually decrease. After the set shooting duration elapses, the shooting stops automatically.
Taking Video Snapshots Options in Steps 4 and 5 _1_ Save as album (Step 4) The movie clip will be saved as the video snapshot album's first video snapshot. _Add to album (Step 5) The video snapshot just recorded will be added to the album recorded immediately before.
Taking Video Snapshots O You can add [o an album only video snapshots having the same duration (approx. 2 sec.. 4 sec_ or 8 sec. each). If you stop shooting a video snapshot before the set shooting duration elapses, the video snapsnot will be added to the preceding album.
Menu Function Settings The menu options displayed under the [_,_,'], [_,_,:], and [_r,,_, -=] tabs are explained below. [ _,_,'] tab _ Movie exposure Normally, set this to [Auto]. Setting it to [Manual] enables you to manually set the ISO speed, shutter speed, and aperture for movie shooting (p.
Menu Function Settings ®_ _ShuttedAE lock button You can change the function assigned to the shutter button's halfway position and to the AE lock button. • AF/AE lock: Normal function. Press the shutter button halfway to execute AF. Press the <-X-> button for AE lock.
Menu Function Settings _ Remote control You can use the Remote Controller RC-6 (sold separately, p.261 ) to start and stop the movie shooting. Set the release mode switch to <2>, then press the transmit button. If the switch is set to <O> (immediate shooting), still photo shooting will take effect.
Menu Function Settings [ _,_,:] tab _ Sound recording Normally, the built-in microphone will record monaural sound. Stereo sound recording is possible by connecting an external microphone equipped with a stereo mini plug (3.5ram dia.) to the camera's external microphone iN terminal (p.
Menu Function Settings [Wind filter] When [Enable] is set, outdoor wind noise entering the microphone will be reduced. Note that some low-tone noise might also be reduced. When shooting in places where there is no wind, set this to [Disable] for a more natural sound recording.
Menu Function Settings [l_,_] tab _ Exposure compensation Although exposure compensation can be set up to _+5 stops, exposure compensation for movies is restricted only up to _+3 stops. For still photos, exposure compensation may extend up to _+5 stops.
O White <B> and Red <H> internal Temperature Warning Icons if the camera's internal temperature increases due to prolonged movie shooting or a 7igh ambient temperature, a white <l_l> icon will appear. Even if you shoot a movie while this icon is displayed, the movie's image quality will not be affected.
Movie Shooting Cautions Recording and image Quality If you use a card having a slow writing speed, a five-level indicator might appear on the right of the screen during movie shooting. It indicates how much data has not yet been written to the card _remainlng capacity of the internal buffer memory).
Handy Features ® Silencing the Beeper (p.166) ® Card Reminder (p.166) ® Setting the image Review Time (p.166) ® Setting the Auto Power-off Time (p.167) ® Adjusting the LCD Monitor Brightness (p.167) ® Creating and Selecting a Folder (p.168) ® File Numbering Methods (p.
Handy Features Silencing the Beeper You can prevent the beeper from sounding when focus is achieved or during self-timer operation. Under the [t_'] tab, select [Beep], then press <__>. Select [Disable], then press <_-_>. #;f=_8 Card Reminder This prevents shooting if there is no card in the camera.
Handy Features setting the Auto Power-off Time To save battery power, the camera turns off automatically after the set time of idle operation elapses. You can set this auto power-off time.
Handy Features Creating and selecting a Folder You can freely create and select the folder where the captured images are to be saved. This is optional since a folder will be created automatically for saving captured images. Create a Folder i Select [Select folder].
Handy Features Selecting a Folder Lowest file number Number of images in folder Folder name ®_ With the folder selection screen displayed, select a folder and press <8 > . _y,, The folder where the captured images will be saved is selected. ®_ Subsequent captured images will be recorded into the selected folder.
Handy Features File Numbering Methods The image files will be numbered from 0001 to 9999 in the order the images are taken, then saved in a folder. You can change how the file number is assigned. The file number wiii appear on your computer in this format: llVlG O001.
Handy Features ®_ [Auto reset]: The file numbering is reset to 0001 whenever you replace the card or create a folder. Whenever the card is replaced or a new folder created, the file numbering starts from 0001. This is convenient if you want to organize images according to cards or folders.
Handy Features Setting Copyright Information* When you set the copyright information, it wiii be appended to the image as Exif information. Select [Copyright information]. ® Under the [_f_] tab, select [Copyright information], then press <_-_>.
Handy Features Text Entry Procedure _ Changing the entry area: Press the <[_> button to toggle between the top and bottom entry areas. _ Moving the cursor: Press the <4_> key to move the cursor.
Handy Features Auto Rotation of Vertical l_ages Vertical images are rotated automatically so they are displayed vertically on the camera's LCD monitor and on the personal computer instead of horizontally. The setting of this feature can be changed.
Handy Features INFO. Checking Camera Settings While the shooting settings (p.47) are displayed, press the <INFO.> button to display the camera's major function settings. Settings display remaining capacity correction (p.119)/ WB bracketing (p.
Handy Features Reverting the Camera to the Default Settings _ The camera's shooting settings and menu settings can be reverted to the default. This option is available in Creative Zone modes. _ Select [Clear settings]. _ Under the [_'_] tab, select [Clear settings], then press <_-_>.
Handy Features Shooting Settings One-Shot AF Automatic selection [] (Single shooting) E*_] (Evaluative metering) AUTO (Auto) Max.: 3200 Canceled NormalFiring 0 (Zero) Unchanged image-recording Settings IL Auto Standard Enable/ Correction data retained sRGB (Auto) Canceled Canceled Canceled Continuous Enable Erased Camera Settings 3oseo.
Handy Features Live View Shooting Settings Enable Live mode Off 3:2 16 sec. Movie Shooting Settings Auto Live mode Disable AF/AE lock Disable Disable 1920x1080 Auto 16 sec.
Handy Features Turning the LCD IVlonitor Off/On The shooting settings display (p.47) can be turned on or off by pressing the shutter button halfway. Under the [_':] tab, select [LCD off/on btn], then press <_-_>. The available settings are described below.
Setting the Flash _ The built-in flash and external Speedlite settings can be set with the camera's menu. You can use the camera's menu to set the external Speedlite function settings only if the attached EX-series SpeedHte is compatible with this function.
Setting the Flash* [Built.in flash rune, setting] and [External flash rune, setting] With [Built-in flash func. setting] and [External flash func. setting], you can set the functions listed in the table below. The functions displayed under [External flash func.
Setting the Flash _ _ Shutter sync. Normally, set this to [1st curtain] so that the flash fires immediately after the exposure starts. If [2nd curtain] is set, the flash will fire right before the exposure ends. When this is combined with a slow sync speed, you can create a trail of light such as from car headlights at night.
Setting the Flash _ ®_Clear flash settings With the [Built-in flash func. setting] or [External flash func. setting] screen displayed, press the <INFO. > button to display the screen to clear the flash settings. When you select [OK], the settings for the flash will be cleared.
,_c_ Automatic Sensor Cleaning __, Whenever you set the power switch to <ON> or <OFF>, the Self Cleaning Sensor Unit operates to automatically shake off the dust on the front of the sensor. Normally, you need not pay attention to this operation.
Appending Dust Delete Data _ Normally, the Self Cleaning Sensor Unit wiii eliminate most of the dust that might be visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image for erasing the dust spots later.
Appending Dust Delete Data* II D D Photograph a solid=white object. ®_ At a distance of 20 cm - 30 cm (0.7 ft. - 1.0 ft.), fill the viewfinder with a patternless, solid-white object and take a picture. },, The picture will be taken in aperture- priority AE mode at an aperture of f/22.
Manuat Sensor Cleaning _ Dust which could not be removed by the automatic sensor cleaning can be removed manually with a blower, etc. The surface of the image sensor is extremely delicate. If the sensor needs to be cleaned directly, having it done by a Canon Service Center is recommended.
Manual Sensor Cleaning* U While cleaning the sensor, never do any of the following. If the power is cut off, the shutter will close and the shutter curtains and image sensor might get damaged, • Setting the power switch to <OFF>. - Opening the battery compartment cover, - Opening the card slot cover.
Wireless Flash Photography You can use the built-in flash for wireless flash shooting. The camera's built-in flash can work as a master unit with Canon Speedlites having a wireless slave feature and wirelessly trigger the Speedlite(s) to fire.
Using Wireless Flash _ Slave Unit Settings and PoSition Regarding your Speedfite (slave unit), refer to its instruction manual and set it as follows. The settings other than the below for the slave unit's control are all set with the camera. Different types of Canon Speedfite slave units can be used and controlled together.
Easy Wireless Flash Shooting An easy, basic, and fully-automatic wireless flash shooting is explained below. Fully Automatic Shooting with One External Speedlite Steps 1 to 4 and 6 apply to all wireless flash shooting. Therefore, these steps are omitted in the other wireless flash setups explained on the pages hereafter.
Easy Wireless Flash Shooting 5 Select [Built=in flash rune. setting]. ® Select [Built-in flash func. setting], then press <8>. Select [EasyWireless]. ® For [Built-in flash], select [EasyWireless], then press <_-_>. Set [Channel]. ® Set the channel (1-4) to the same one as the slave unit.
Easy Wireless Flash Shooting Fully_automatic Shooting with Multiple External Speedlites You can have multiple slave units fire as if they were a single Speedlite. Convenient when you need a large flash output. Basic settings: Flash mode : E=TTL II E=TTL II meter.
Custom Wireless Flash Shooting Fully,automatic Shooting with One E×temal Speedlite and Built.in Flash This describes fully-automatic wireless flash shooting with one external Speedlite and the built-in flash. You can change the flash ratio between the external Speedlite and built-in flash to adjust how the shadows look on the subject.
Custom Wireless Flash Shooting Fully-automatic Shooting with Multiple External Speedlites Multiple Speedlite slave units can be treated as one flash unit or separated into slave groups whose flash ratio can be set.
CustomWirelessFlashShooting [=_ (A:B)] Multiple slave units in multiple groups Divide the slave units into groups A and B, and change the flash ratio to obtain the desired lighting effect.
Custom Wireless Flash Shooting Fully_autornatic Shooting with the Built,in Flash and Multiple External Speedlites The built-in flash can also be added to wireless flash shooting explained on pages 195-196.
Other Settings Flash Exposure Compensation When [Flash mode] is set to [E-TTL II], flash exposure compensation can be set. The flash exposure compensation settings (see below) which can be set will differ depending on the [Wireless func.] and [Firing group] settings.
Other Settings Setting the Flash Output Manually for Wireless Flash When [Flash mode] is set to [Manual flash], the flash output can be set manually. The flash output settings (['_ flash output], [Group A output], etc.) that can be set will differ depending on the [Wireless func.
.
CaHOH CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan U.S.A. -- CANADA-- EUROPE, -- AFRICA & MIDDLE EAST CENTRAL & -- SOUTH AMERICA ASIA -- OCEANIA-- JAPAN -- CANON U.S.A. INC. One Canon Plaza, Lake Success, NY 11042-1198, U.
デバイスCanon 600Dの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Canon 600Dをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCanon 600Dの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Canon 600Dの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Canon 600Dで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Canon 600Dを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCanon 600Dの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Canon 600Dに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCanon 600Dデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。