Canonメーカー6992B002の使用説明書/サービス説明書
ページ先へ移動 of 30
PIXMA MX920 Setup Guide © CANON INC. 2012 series.
Setup Guide This guide provides information for setting up a network connection for the printer . Network Connection Wireless Connection Preparation for Connection Printer Setup Setup Procedure Select.
Network Connection W ireless Connection a Preparation for Connection Before Starting Wireless Connection Setup 1. Make sure that the printer is turned on.
2. Use the buttons (A) to select the WLAN setup icon. 3. Press the OK button (B). The (blue) Wi-Fi lamp (C) lights up when wireless connection is enabled. c Setup Procedure Selection The printer will automatically search for access points supporting WPS.
d -A Push Button Method d Connection Using WPS 1. Press and hold the WPS button on the access point. For details on pressing the WPS button, refer to the access point manual. 2. Press the OK button on the printer within 2 minutes. The (blue) Wi-Fi lamp on the printer ashes while searching for or connecting to the access point.
d -B Standar d setup d Connection via Standard setup 1. Select Standard setup. 2. Press the OK button. 3. Select your access point, then press the OK button. 4. One of the screens below will be displayed on the printer . 5. Press the OK button. 6. Enter the network password (WEP key or passphrase).
10. When the left screen appears, press the OK button. 1 1. When the screen shown on the right appears, press the COPY button (A). The network connection setup is now complete.
d -C WPS d Connection Using WPS 1. Select WPS. 2. Press the OK button. 3. Select Push button method. 4. Press the OK button. 5. Press the OK button. 6. Press and hold the WPS button on the access point. For details on pressing the WPS button, refer to the access point manual.
d -D Other setup (Advanced setup) d Connection via Advanced setup 1. Select Other setup. 2. Press the OK button. 3. Select Advanced setup. 4. Press the OK button. 5. Select your access point, then press the OK button. 6. Select the security protocol used by the access point, then press the OK button.
Disable 7. When the left screen appears, press the OK button. 8. When the screen shown on the right appears, press the COPY button (A). The network connection setup is now complete.
WEP 7. Select the WEP key number you want to use. 8. Press the OK button. 9. Press the OK button. 10. Enter the WEP key . Character entry is case-sensitive. 1 1. Press the left Function button (A). 12. Make sure that the WEP key is correct. 13. Press the left Function button.
WP A/WP A2 7. Press the OK button. 8. Enter the passphrase. Character entry is case-sensitive. 9. Press the left Function button (A). 10. Make sure that the passphrase is correct. 1 1. Press the left Function button. 12. When the left screen appears, press the OK button.
W ired Connection a Preparation for Connection Before Starting Wired Connection Setup 1. Make sure that the printer is turned on. If the power is on, a button on the Operation Panel (A) is lit. Notes on Wired Connection Make sure that the computer and router (A) are connected.
2. Connect the printer and a network device (router , etc.) with an Ethernet cable (A). Do not connect it to the USB port. c Printer Setup 1. Press the MENU button (A) on the printer . 2. Use the buttons (A) to select Setup in the next screen. 3. Press the OK button (B).
8. Select Change wireless/wired. 9. Press the OK button. 10. Select Wired LAN active. 1 1. Press the OK button. 12. When the screen shown on the right appears, press the COPY button (A).
Character Entr y Y ou can enter the characters when the keyboard is displayed on the printer . Follow the procedure below . 1. Y ou can enter the characters when the keyboard is displayed on the printer's LCD.
T roubleshooting Standar d setup The T arget Access Point is Not Detected Is the network device (router , etc.) turned on? If the network device is already turned on, turn it off, then turn it back on. Check the access point name/network name and network password of your access point or router .
When you have only one access point: Select Use one AccessPoint only , then press the OK button. Select the MAC address of the target access point on the displayed screen, then press the OK button. For details on how to check the MAC address of the access point, refer to the manual supplied with the access point or contact its manufacturer .
WEP Failed to connect to the access point. Make sure that the WEP key entered for the access point is correct. In addition, when using WEP key number 2, 3 or 4 of the access point, set to use WEP key number 1, or select a WEP key number by entering wireless connection settings of the printer directly .
T o perform Standard setup again 1. Press the MENU button (A). 2. Use the buttons (B) to select WLAN setup, then press the OK button. .
WP A/WP A2 Failed to connect to the access point. Make sure that the passphrase entered for the access point is correct. If the problem is not resolved, there may be other causes. See also the sections below: If the DHCP function of the access point is inactive, enable the DHCP function and congure wireless connection settings again.
T o perform Standard setup again 1. Press the MENU button (A). 2. Use the buttons (B) to select WLAN setup, then press the OK button. .
WPS Cannot connect. Connections are being attempted from multiple access points simultaneously . The screen appears when connections are being attempted from multiple access points simultaneously . W ait for a while, then congure WPS settings again.
Advanced setup The T arget Access Point is Not Detected Is the network device (router , etc.) turned on? If the network device is already turned on, turn it off, then turn it back on. Check the access point name/network name and network password of your access point or router .
When using multiple access points: Select Use multiple AccessPoints, then press the OK button. An Unknown Access Point is Displayed Access points in use nearby may also be detected. The Access Point Name is Not Displayed Properly Access point names with double-byte characters are not displayed properly .
Disable Failed to connect to the access point. Is the network device (router , etc.) turned on? If the network device is already turned on, turn it off, then turn it back on.
WEP The WEP Key is Not Displayed Automatically Refer to the manual supplied with the access point or contact its manufacturer . Failed to connect to the access point.
The device may not be able to connect to the network in the following cases: If the DHCP function of the access point is inactive, enable the DHCP function or specify the IP address (IPv4 only) of the printer and con gure wireless connection settings again.
WP A/WP A2 The Passphrase is Not Displayed Automatically Refer to the manual supplied with the access point or contact its manufacturer . Failed to connect to the access point. Make sure that the passphrase entered for the access point is correct. If the problem is not resolved, there may be other causes.
T o perform Advanced setup again 1. Press the MENU button (A). 2. Use the buttons (B) to select WLAN setup, then press the OK button. .
デバイスCanon 6992B002の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Canon 6992B002をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCanon 6992B002の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Canon 6992B002の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Canon 6992B002で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Canon 6992B002を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCanon 6992B002の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Canon 6992B002に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCanon 6992B002デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
