AdvantechメーカーPCM-3350 Seriesの使用説明書/サービス説明書
ページ先へ移動 of 94
PCM-3350 Series NS Geode 586-Level PC/104 CPU Module with SVGA/LCD/ LAN Interface User's Manual.
Copyright notice This document is copyrighted, 2001 . All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice.
Packing list Before you begin installing your card, please make sure that the following materials have been shipped: • 1 PCM-3350 All-in-one single board computer • CD-ROM or Disks for utility, drivers, and manuals (PDF format) • 1 2.
Contents Chapter 1 General Information 1 1 . 1 Introduction ....................................................................... 2 1 . 2 Features ............................................................................. 3 1 . 3 Specifications .
2 . 11 VGA connector (CN9) ................................................... 1 3 2.1 1.1 CR T display connector (CN9) ................................. 1 3 2.12 Main power (+5 V / +12 V) connector (CN1 1) .......... 1 3 2.13 PS/2 keyboard/mouse connector (CN12) .
4.2.5 Power management setup ......................................... 3 3 4.2.6 PnP/PCI configuration .............................................. 3 4 4.2.7 Integrated peripherals ................................................ 3 5 4.2.8 Change password .
C . 6 PC/104 connector (CN6) ............................................... 7 0 C . 7 Parallel port connector (CN7) ...................................... 7 0 C . 8 Backlight connector (CN8) ........................................... 7 1 C . 9 VGA connector (CN9) .
Figures Figure 1-1: PCM-3350 dimensions ................................................................ 6 Figure 2-1: Locating connectors (component side) ..................................... 9 Figure 2-2: Locating connectors (solder side) .........
T ables T able 2-1: Connectors ...................................................................................................... 8 T able 2-2: Serial port connections (COM1, COM2) ........................................................ 1 1 T able 2-3: Serial port default settings .
.
CHAPTER General Information This chapter gives background information on the PCM-3350. Sections include: • Introduction • Features • Specifications • Board dimensions 1.
2 PCM-3350 User's Manual 1. 1 Introduction The PCM-3350 is the ultimate cost-effective solution for limited space applications. It is a new NS Geode Biscuit PC with enhanced graphics function. It uses a NS CS5530A chipset which supports TFT LCDs.
Chapter 1 General Information 3 1.2 Features • Ultra-compact size single board computer , smaller than a 3½" hard disk drive (96 mm x 90 mm) • Onboard NS Geode GX1 300MHz CPU • Up to 128 M.
4 PCM-3350 User's Manual 1. 3 Specifications 1.3.1 Standard SBC functions • CPU : Embedded Low power NS Geode GX1-300 MHz processor • BIOS : A W ARD 256 KB Flash memory • System memory : One 144-pin SODIMM socket accepts up to 128 MB SDRAM • Enhanced IDE interface : Supports up to two EIDE devices.
Chapter 1 General Information 5 • CR T display mode : Non-interlaced CR T monitor resolutions up to 1024 x 768 @ 24 bpp 1.3.4 Ethernet function • Chipset : Intel 82559 ER • Ethernet interface : PCI 10/100 Mbps Ethernet. IEEE 802.3 U protocol compatible • Connection : On-board 2 x 5 2.
6 PCM-3350 User's Manual 1. 4 Board dimensions Figure 1-1: PCM-3350 dimensions.
CHAPTER 2 Installation This chapter tells how to set up the PCM-3350 hardware. It includes instruc- tions on setting jumpers and connecting peripherals, switches and indicators. Make sure you read all the safety precautions before you begin the installation proce- dure.
8 PCM-3350 User's Manual 2. 1 Connectors The board has a number of connectors that allow you to configure your system to suit your application. The tables below shows the function of each of the .
Chapter 2 Installation 9 2. 2 Locating connectors Warning: Make sure you use the correct component side. Improper installation can cause serious damage to your hardware! Figure 2-1: Locating connector.
10 PCM-3350 User's Manual 2. 3 Safety precautions Warning! Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because sensitive electronic components can be damaged by a sudden rush of power.
Chapter 2 Installation 11 2 . 6 Serial ports (CN3: COM1; CN4: COM2/RS-232; CN18: COM2/RS-422/485) The PCA-3350F offers two serial ports: COM1 in RS-232 and COM2 (CN4: RS-232, CN18:RS-422/485). Refer to CMOS "Integrated Peripher- al" for RS-232, 422 or 485 settings.
12 PCM-3350 User's Manual this in the system BIOS setup. The table below shows the settings for the PCA-3350F Series' board's ports: T able 2-3: Serial port default settings Port Address Interrupt Default COM1 3F8, 3E8 IRQ4 3F 8 COM2 2F8, 2E8 IRQ3 2F 8 2 .
Chapter 2 Installation 13 2 . 9 Parallel port connector (CN7) Normally , the parallel port is used to connect the card to a printer . The PCM-3350 includes a multi-mode (ECP/EPP/SPP) parallel port. It is accessed via CN7, a 26-pin flat-cable connector .
14 PCM-3350 User's Manual 2.13 PS/2 keyboard/mouse connector (CN12) The PCM-3350 board provides a pin head keyboard connector , which supports both a keyboard and a PS/2 style mouse. In most cases, especially in embedded applications, a keyboard is not used.
Chapter 2 Installation 15 pin number one should be on the right. Please refer to any documenta- tion that came with the drive for more information. If your cable needs to be custom made, you can find the pin assign- ments for the board's connector in Appendix C.
16 PCM-3350 User's Manual Multifunction jumpers (MJ1) MJ1-A MJ1-B MJ1-C MJ1-D MJ1-E 2.17 Multifunction Jumpers (MJ1) MJ 1 Assi gn Pins Functi on Notes MJ1 -A 1- 3 -5 V, -1 2 V in pu t Pin 1: -5 V.
Chapter 2 Installation 17 2.17.4 IR connector (MJ1-D) This connector supports the optional wireless infrared transmitting and receiving module. This module mounts on the system case.
18 PCM-3350 User's Manual 1 . Make sure that all power supplies to the system are switched off. 2 . Install the SODIMM card. Install the SODIMM so that its gold pins point down into the SODIMM socket. 3 . Slip the SODIMM into the socket at a 45 degree angle and carefully fit the bottom of the card against the connectors.
Chapter 2 Installation 19.
20 PCM-3350 User's Manual.
Software Configuration This chapter details the software configu- ration information. It shows you how to configure the card to match your applica- tion requirements.
22 PCM-3350 User's Manual 3. 1 Introduction The PCM-3350 system BIOS and custom drivers are located in a 256 KB, 32-pin Flash ROM device, designated U17. A single Flash chip holds the system BIOS and VGA BIOS. The display type can be configured via software.
Chapter 3 Software Configuration 23 1 . Apply power to the PCM-3350 Series with a color TFT display attached. This is the default setting for the PCM-3350 series. Make sure that the A WDFLASH.EXE and *.BIN files are located in the working drive. Note: Make sure that you do not run AWDFLASH.
24 PCM-3350 User's Manual 3 . 4 Connections for two standard LCDs 3.4.1 Connections for T oshiba L TM10C042(640 x 480 TFT color LCD) T able 3-1: Connections for T oshiba L TM10C042 L TM10C042 PCM.
Chapter 3 Software Configuration 25 3.4.2 Connections for T oshiba L TM12C275A (800 x 600 TFT color LCD) T able 3-2: Connections for T oshiba L TM12C275A L TM12C275A PCM-3350 Series CN 2 Pin Name Pin .
26 PCM-3350 User's Manual.
Award BIOS Setup This chapter describes how to set BIOS configuration data. CHAPTER 4.
28 PCM-3350 User's Manual 4 . 1 System test and initialization These routines test and initialize board hardware. If the routines encounter an error during the tests, you will either hear a few short beeps or see an error message on the screen. There are two kinds of errors: fatal and non-fatal.
Chapter 4 Award BIOS Setup 29 4 . 2 Award BIOS setup A ward’ s BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it retains the Setup information when the power is turned off.
30 PCM-3350 User's Manual 4.2.2 Standard CMOS setup When you choose the ST ANDARD CMOS SETUP option from the INITIAL SETUP SCREEN menu , the screen shown below is displayed. This standard Setup Menu allows users to configure system components such as date, time, hard disk drive, floppy drive and display.
Chapter 4 Award BIOS Setup 31 4.2.3 BIOS features setup By choosing the BIOS FEA TURES SETUP option from the INITIAL SETUP SCREEN menu, the screen below is displayed. This sample screen contains the manufacturer ’ s default values for the PCM- 3350.
32 PCM-3350 User's Manual 4.2.4 Chipset features setup By choosing the CHIPSET FEA TURES SETUP option from the INITIAL SETUP SCREEN menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the PCM-3350.
Chapter 4 Award BIOS Setup 33 4.2.5 Power management setup By choosing the POWER MANAGEMENT SETUP option from the INITIAL SETUP SCREEN menu, the screen below is displayed. This sample screen contains the manufacturer ’ s default values for the PCM-3350.
34 PCM-3350 User's Manual 4.2.6 PnP/PCI configuration By choosing the PnP/PCI CONFIGURA TION option from the Initial Setup Screen menu, the screen below is displayed. This sample screen contains the manufacturer ’ s default values for the PCM- 3350.
Chapter 4 Award BIOS Setup 35 4.2.7 Integrated peripherals By choosing the INTEGRA TED PERIPHERALS option from the INITIAL SETUP SCREEN menu, the screen below is displayed. This sample screen contains the manufacturer’s default values for the PCM-3350.
36 PCM-3350 User's Manual 4.2.8 Change password To change the password, choose the PASSWORD SETTING option form the Setup main menu and press <Enter>. 1. If the CMOS is bad or this option has never been used, a default password is stored in the ROM.
Chapter 4 Award BIOS Setup 37 4.2.9 Save & exit setup If you select this option and press <Enter>, the values entered in the setup utilities will be recorded in the chipset’s CMOS memory. The microprocessor will check this every time you turn your system on and compare this to what it finds as it checks the system.
38 PCM-3350 User's Manual.
PCI Bus Ethernet Interface This chapter provides information on Ethernet configuration. • Introduction • Installation of Ethernet driver for W indows 98/NT/2000 • Further information CHAPTER 5.
40 PCM-3350 User's Manual 5. 1 Introduction The PCM-3350 is equipped with a high performance 32-bit Ethernet chipset which is fully compliant with IEEE 802.3 100 Mbps CSMA/CD standards. It is supported by major network operating systems. It is also both 100Base-T and 10Base-T compatible.
Chapter 5 PCI Bus Ethernet Interface 41 1 . a. Select "Start", "Settings". "Control Panel". b. Double click "Network".
42 PCM-3350 User's Manual 3 . a. Select the "Adapter" item to add the Ethernet card. 4 . a. Click "Have Disk" to install the driver 5 . a. Insert the CD into the D:drive b. Fill in "D:PC1043350LAN82559ERW9x&w2k" c.
Chapter 5 PCI Bus Ethernet Interface 43 6 . a. Choose the "82559ER" item. b. Click "OK". 7 . a. Make sure the configurations of relative items are set correctly .
44 PCM-3350 User's Manual 5. 3 Further information Realtek website: www .Realtek.com EMAC website : ww w . emacinc .com.
SVGA Setup • Introduction • Installation of SVGA driver for W in- dows 95/98/NT CHAPTER 6.
46 PCM-3350 User's Manual 6. 1 Introduction The PCM-3350 Series has an on-board LCD/VGA interface. The specifications and features are described as follows: 6.1.1 Chipset The PCM-3350 uses an NS CS5530A chipset for its VGA controller . It supports many popular 18-bit LCD displays and conventional analog CR T monitors.
Chapter 6 SVGA Setup 47 6.2.1 Installation for Cyrix MediaGX Certified drivers for Windows 95/98. Insert the disk into the CD-ROM drive. 1. Select "Start" then "Run". 2. T ype the correct path for the driver (like the example below) "D:PC1043350VGAW in9xc_40" 3.
48 PCM-3350 User's Manual 2. Click "Finish" to continue. 3. Click "Next" to proceed to the next step. Click "Y es" after you read the license agreement.
Chapter 6 SVGA Setup 49 4. Follow the instructions which appear on the screen. 5. Insert the W in95/ 98 CD-ROM into the CD-ROM drive. T ype the correct path for the W in9 x source file.
50 PCM-3350 User's Manual 6. Choose "Y es", then click "Finish" to restart the computer ..
Chapter 6 SVGA Setup 51 6.2.2 Installation for Windows NT 1 . a. Select "Start", "Settings" then "Control Panel" to get to the screen below . b. Double click on the "Display" icon. 2 . a. Choose the "Settings" selection.
52 PCM-3350 User's Manual 3 . Press the "Change..." button. 4 . Click on the "Have Disk..." button.
Chapter 6 SVGA Setup 53 5 . a. Insert the disk into the CD-ROM drive. b. T ype "D:PC1043350VGAWINNTVGA.110" c. Press "OK". 6 . a. Select the highlighted item.
54 PCM-3350 User's Manual 7 . Press "Y es" to proceed. 8 . Press "OK" to reboot..
Chapter 6 SVGA Setup 55 9 . a. Repeat Step 1 in this manual, select the "Settings" label. b. Adjust the resolution and color . c. Click "T est" to see the results.
56 PCM-3350 User's Manual 6. 3 Further information For further information about the PCI/SVGA installation in your PCM-3350, including driver updates, troubleshooting guides and F AQ lists, visit the following web resources: Cyrix web site: ww w .
Programming the W atchdog Timer The PCM-3350 is equipped with a watchdog timer that resets the CPU or generates an interrupt if processing comes to a standstill for any reason. This feature ensures system reliability in industrial standalone or unmanned environments.
58 PCM-3350 User's Manual A.1 Programming the watchdog timer The default configuration of the timer is enabled with system reset. To enable the watchdog timer, you must make a program which writes 1 to I/O port address 443 (hex) at regular intervals.
Appendix A Programming the Watchdog Timer 59 The following example shows how you might program the watchdog timer in BASIC: 10 REM Watchdog timer example program 20 X=Out &H443,1 REM Enable and re.
60 PCM-3350 User's Manual.
APPENDIX B Installing PC/104 Modules This appendix gives instructions for installing PC/104 modules..
62 PCM-3350 User's Manual B. 1 Installing PC/104 modules The PCM-3350's PC/104 connectors give you the flexibility to attach PC/104 modules. Installing these modules on the PCM-3350 is quick and simple. The following steps show how to mount the PC/104 modules: 1 .
Appendix B Installing PC/104 Modules 63 Figure B-1: PC/104 module mounting diagram Figure B-2: PC/104 module dimensions (mm) (±0.1) PCM-3 346 Female PC/104 Mounting Support Male PC/104 module 8.
64 PCM-3350 User's Manual T able B-1: PCM-3350 PC/104 connectors (CN6) Pin Signal (CN6) Signal (CN6) Number Row A Row B Row C Row D 0— — 0 V 0 V 1 IOCHCHK* 0 V SBHE* MEMCS16* 2 S D 7 RESETDRV.
Pin Assignments This appendix contains information of a detailed or specialized nature. It includes: • Ethernet connector • LCD connector • COM1 connector • COM2 connector • EIDE HDD connect.
66 PCM-3350 User's Manual C. 1 Ethernet connector (CN1) T able C-1: Ethernet connector (CN1) Pin Signal Pin Signal 1 Vcc (+5 V) 2 ACTLED- 3 RX+ 4 RX- 5 LILED- 6 GND 7 NC 8 GND 9 TX+ 1 0 TX- 3 6 4.
Appendix C Pin Assignments 67 C . 2 LCD connector (CN2) T able C-2: LCD connector (CN2) Pin Signal Pin Signal 1 VDDSAFE +5 V 2 VDDSAFE +5 V 3 GND 4 GND 5 VDDSAFE +3.
68 PCM-3350 User's Manual C. 3 COM1 connector (CN3) T able C-3: COM1 connector (CN3) Pin Signal Pin Signal 1 RLSD 2 DS R 3 R X 4 RTS 5 T X 6 CTS 7 DTR 8 R I 9 GND 10 NC C.
Appendix C Pin Assignments 69 C . 5 EIDE hard drive connector (CN5) Table C-5: EIDE hard drive connector (CN5) Pin Signal Pin Signal 1 *RESET 2 G ND 3D 7 4D 8 5D 6 6D 9 7 D 5 8 D10 9D 4 1 0 D 1 1 1 1 .
70 PCM-3350 User's Manual C .6 PC/104 connector (CN6) For details on PC/104 connectors, please refer to Appendix B. C . 7 Parallel port connector (CN7) Table C-7: Parallel port connector (CN7) Pi.
Appendix C Pin Assignments 71 C .8 Backlight connector (CN8) C . 9 VGA connector (CN9) T able C-9: VGA connector (CN1 1) Pin Signal Pin Signal 1 RED_OUT 2 VCC_VGA 3 GREEN_OUT 4 GND 5 BLUE-OUT 6 N/C 7 .
72 PCM-3350 User's Manual C.10 Main power (+5 V) connector (CN1 1) T able C-10: Main power (+5 V) connector (CN1 1) Pin Signal 1 +12 V 2 GND 3 GND 4 Vcc (+5) C.
Appendix C Pin Assignments 73 C.12 FDD connector (CN14) T able C-12: FDD connector (CN14) Pin Signal 1 Vcc (5 V) 2 INDEX 3 Vcc (5 V) 4 DRIVE SELECT 0 5 Vcc (5 V) 6 DISK CHANGE 7N C 8 NC (READY) 9 NC (HD OUT) 1 0 MOTOR ON 11 N C 12 DIRECTION SELECT 13 NC (1.
8 71 2 C .13 USB connector (CN 17 ) T able C -13: USB connector Pin Signal Pin Signal 1 USBVCC (5 V) 2 USB VCC (5 V) 3 DA T A 0- 4 DA T A 1- 5 DA T A 0+ 6 DA T A 1+ 7 GND 8 GND.
74 PCM-3350 User's Manual C.1 3 CompactFlash™ socket (CN16) T able C-13: CompactFlash™ socket (CN16) Pin Signal Pin Signal 1 GND 2 D 0 3 3 D04 4 D05 5 D06 6 D07 7 *CS0 8 A 1 0 9 * A T A SEL 1.
Appendix C Pin Assignments 75 Figure C-1: CompactFlash™ socket.
76 PCM-3350 User's Manual C.14 COM2 connector for 422/485 (CN18) T able C-15: MJ1-A, -5 V , -12 V input Pin Signal 1 -5 V 2 GND 3 -12 V T able C-16: MJ1-B, fan connector Pin Signal 5 +5 V 6 GND 7 +12 V C.
Appendix C Pin Assignments 77 T able C-17: MJ1-C, reset button Pin Signal 9 *system reset 10 GND T able C-18: MJ1-D, IR connector Pin Signal 12 +5 V 13 NC 14 Receive 15 GND 16 Transmit T able C-19: MJ.
78 PCM-3350 User's Manual.
System Assignments • System I/O ports • DMA channel assignments • Interrupt assignments • 1st MB memory map APPENDIX D.
80 PCM-3350 User's Manual D . 1 System I/O ports T able D-1: System I/O ports Addr . range (Hex) Device 000-01F DMA controller 020-021 Interrupt controller 1, master 022-023 Chipset address 040-0.
Appendix D System Assignments 81 D. 2 DMA channel assignments T able D-2: DMA channel assignments Channel Function 0 Available 1 Available 2 Floppy disk (8-bit transfer) 3 Parallel** 4 Cascade for DMA.
82 PCM-3350 User's Manual D. 3 Interrupt assignments T able D-3: Interrupt assignments Interrupt# Interrupt source N MI Parity error detected IRQ 0 Interval timer IRQ 1 Keyboard IRQ 2 Interrupt f.
Appendix D System Assignments 83 D . 4 1st MB memory map T able D-4: 1st MB memory map Addr . range (Hex) Device F000h - FFFFh System ROM E000 - EFFF Unused CC00 - DFFF available C800 - CBFF Ethernet .
デバイスAdvantech PCM-3350 Seriesの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Advantech PCM-3350 Seriesをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAdvantech PCM-3350 Seriesの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Advantech PCM-3350 Seriesの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Advantech PCM-3350 Seriesで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Advantech PCM-3350 Seriesを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAdvantech PCM-3350 Seriesの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Advantech PCM-3350 Seriesに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAdvantech PCM-3350 Seriesデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。