CanonメーカーEOS50DBODYの使用説明書/サービス説明書
ページ先へ移動 of 228
E INSTRUCTION MANUAL E INSTRUCTION MANUAL C OP Y.
2 Thank you for purchasing a Canon product. The EOS 50D is a high-performance, digital SLR camera featuring a fine-detail CMOS sensor with 15. 10 effective megapixels, DIGIC 4, high-precision and high-speed 9-point AF (all cr oss-type points), high- speed 6.
3 Before starting, check that all the following items have been included with your camera. If anything is missing, contact your dealer . * Battery Charger CG-580 or CB-5L is pro vided. (The CB-5L comes with a power cord.) If you purchased a Lens Kit, chec k tha t the lens is included.
4 Icons in this Manual < 6 > : Indicates the Main Dial. < 5 > : Indicates the Quick Control Dial. < 9 > : Indicates the Multi-controller . < 0 > : Indicates the setting button. 0 , 9 , 8 : Indicates that the respective function remains active for 4 sec.
5 For first-time users, chapters 1 an d 2 explain the camera’s basic operations and shooting procedures. Chapters Introduction Camera basics. 2 Getting St arted 23 Basic Shooting Fully automatic shooting for dif ferent subject s.
6 1 2 Introduction Item Check List .................................................... .............................................. 3 Conventions Used in this Manual ...................................................................... 4 Chapters .
7 Contents 5 3 4 Image Settings 59 Setting the Image-recording Quality ................................................................. 60 i : Setting the ISO Speed ........................... ................................................... 63 A Selecting a Picture Style .
8 Contents 6 7 8 D Using the Built-in Flash.................................... .......................................... 107 Flash Control ............. .................................................................................... 111 External Speedlites .
9 Contents 10 11 9 Printing Images and T ransferring Images to a Computer 153 Preparing to Print .......................................... ................................................. 154 w Printing............................... ...............
10 Power Battery • Charging Î p.24 • Battery check Î p.28 Power outlet Î p.190 Auto power off Î p.44 Lens Attachi ng/Detachi ng Î p.31 Zoom Î p.32 Image Stabilizer Î p.33 Basic Settings (Menu Function s) Language Î p.42 Date/Time Î p.42 LCD br ightne ss adjustment Î p.
11 Index to Features Shooting Creative Auto Î p.57 Quick Control scr een Î p.38 Self-timer Î p.90 Program AE Î p.92 Shutter-priority AE Î p.94 Aperture-priority AE Î p.96 Manual exposure Î p.98 Bulb Î p.104 Mirror lockup Î p.106 Exposure adjustment Exposure compensation Î p.
12 Camera Care This camera is a precision in strument. Do not drop it or subject it to physical shock. The camera is not waterproof and cannot be used underwater . If you accidentally drop th e camera into wa ter , promptly consult your nearest Canon Service Center .
13 Handling Precautions LCD Panel an d LCD Monit or Although the LCD monitor is manuf actured with ve ry high precision technology with over 99.99% ef fective pixels, there might be a few dead pixels among the remaining 0.01% or less pixels. Dead pixels displaying only black or red, etc.
14 Quick Start Guide 1 Insert the battery . (p.26) T o recharge the battery , see page 24. 2 Att ach the lens. (p.31) When attaching an EF-S lens, align it with the white index on the camera. For other lenses, align it with the red index. 3 Set the lens focus mode switch to <AF>.
15 Quick Start Guide 6 Set the Mode Dial to < 1 > ( Full Auto). (p.48) All the necessary camera settings will be set automatically . 7 Focus the subject. (p.35) Look through the viewfinder and aim the viewfinder center over the subject. Press the shutter button halfway , and the camera will focus the subject.
16 For detailed information, reference page numbers are provided in parentheses (p.**). Nomenclature Digital terminal (p.154,167) Video OUT terminal (p.141) HDMI mini OUT terminal (p.142) Remote control terminal (p.105) (N3 type) PC terminal (p.1 14) Hot shoe (p.
17 Nomenclature Tripod socket Extension system terminal Battery compartment cover (p.26) Battery compartment cover release lever (p.26) < V > Focal plane mark < 9 > Multi-controller (p.36) Viewfinder eyepiece Eyecup (p.97) Dioptric adjustment knob (p.
18 Nomenclature LCD Panel The display will show only the settings currently applied. Shutter speed Busy ( buSY ) Built-in flash recycling ( buSY ) < M > Beeper (p.
19 Nomenclature Viewfinder Information The display will show only the settings currently applied. Spot metering circle AF points (Superimposed display) < A > AE lock/ AEB in-progress < D >.
20 Nomenclature Mode Dial The Mode Dial has the Basic Zone modes and Creative Zo ne modes. Basic Zone All you do is press the shutter button. Fully automatic shooting for specific kinds of subjects. 1 : Full Auto (p.48) C : Creative Auto (p.57) Creative Zone These modes give you more control over the result.
21 Nomenclature Nomenclature for Kit Le nses EF-S18-200mm f/3. 5-5.6 IS and EF- S18-55mm f/3.5 -5.6 IS EF-S17-85m m f/4-5.6 IS U SM and EF2 8-135mm f/3.5-5.6 IS US M Focus mode switch (p.31) Lens mount index (p.31) Contacts (p.13) Hood mount (p.209, 210) Filter thread (front of lens) (p.
22 Nomenclature Battery Charger CG-580 Charger for Battery Pack BP-51 1A (p.24). Battery Charger CB-5L Charger for Battery Pack BP-51 1A (p.24). Battery pack slot Charge lamp Power p lug This power unit is intended to be correctly orientated in a vertical or floor mount position.
23 1 Getting Started This chapter explain s pr eparatory steps and basic camera operations. Attaching the Strap Pass the end of the strap through the camera’s strap mount eyelet from the bottom. Then pass it through the strap’s buckle as shown in the illustration.
24 1 Remove the protective cover . When you remove the battery from the camera, be sure to reattach the cover to protect it against short circuiting. 2 Att ach the battery . Align the battery’s front edge with the battery charger ’s index line. While pressing down the battery , slide it in the direction of the arrow .
25 Recharging the Battery Recharge the battery on the day before or on the day it is to be used. Even during non-use or storage, a charged battery will gr adually discharge and lose its power . After recharging the battery , detach it and unplug the power cord or prongs from the p ower outlet.
26 Load a fully charged Battery Pack BP-51 1A into the camera. 1 Open the battery compartment cover . Slide the lever as shown by the arrow and open the cover . 2 Insert the battery . Insert the end with the battery contacts. Insert the battery until it locks in place.
27 < 2 > : The camera is turned off and does not operate. Set to this position when not using the camera. < 1 > : The camera turns on. < J > : The camera and < 5 > operate (p.37). Whenever you set the power switch to < 1 / J > or < 2 >, the sensor cleaning will be executed automatically .
28 Turning on the Power When the power switch is set to < 1 > or < J >, the battery level will be indicated in one of four levels: z : Battery level is OK. x : Battery level is slig htly down, but adequate power remains. b : Battery will be exhausted soon.
29 Although the thickness is different be tween the two types of CF cards, either one can be inserted into the camera. Also, Ultra DMA (UDMA) cards and hard disk-type cards can be used. 1 Open the cover . Slide the cover as shown by the arrow to open it.
30 Installing and Removing the CF Card 1 Open the cover . Set the power switch to < 2 >. Make sure the access lamp is off, then open the cover. 2 Remove th e card.
31 1 Remove th e cap s. Remove the rear lens cap and the body cap by turning them as shown by the arrow . 2 Att ach the lens. Align the EF-S lens with the camera’s white EF-S lens mount index and turn the lens as shown by the arrow until it clicks in place.
32 Attaching and Detaching a Lens T o zoom, turn the zoom ring on the lens with your fingers. If you want to zo om, do it before focusing. T urning the zoo m ring after achieving focus may throw o ff the focus slightly . While pressing the lens release button, turn t he lens as s hown by the arrow.
33 The procedure explained here is based on the EF-S17- 85mm f/4-5.6 IS USM lens as an example. * IS stands for Image S tabilizer . 1 Set the IS switch to < 1 >. Set the camera’s power switch to < 1 >. 2 Press the shutter button halfway .
34 T urn the dioptric adju stment knob. T urn the knob left or right so that the nine AF points in the viewfinder look sharp. T o obtain sharp images, hold the camera still to minimize camera shake. 1. Wrap your right hand around the camera grip firmly .
35 Basic Operation The shutter button has two steps. Y ou can press the shutter button halfway . Then you can further press the shutter button completely . Pressing ha lfway This activates autofocusing and automatic exposure metering that sets the shutter speed and aperture.
36 Basic Operation (1) Af ter pressing a button, turn the < 6 > dial. When you press a button, its function remains selected for 6 seconds ( 9 ). During this time, you can turn the < 6 > dial to set the desired setting. When the function turns off or if you press the shutter button half way , the camera will be ready to shoot.
37 Basic Operation Before using the < 5 > dial, set the power switch to < J >. (1) Af ter pressing a button, turn the < 5 > dial. When you press a button, its function remains selected for 6 seconds ( 9 ). During this time, you can turn the < 5 > dial to set the desired setting.
38 The shooting settings are displayed on t he LCD monitor where you can quickly select and set the functions. This is called the Quick Control screen. 1 Display the Quick Contro l screen. Press < 9 > straight dow n. X The Quick Control screen will appear (10 sec.
39 Using the Quick Control Screen On the Quick Control screen, select the function and press < 0 >. The respective setting screen will then appear (except for the shutter speed and aperture). T urn the < 5 > or < 6 > dial to change the setting.
40 By setti ng variou s function s with t he menus, you can set the i mage- recordi ng quality , date/t ime, etc. While looki ng at the LCD moni tor , you use the < M > button on t he camera back and the < 6 > < 5 > dials. Menu Operations * The [ 2 / 8 / 9 ] tabs are not displayed in the Full Auto and Bas ic Zone modes.
41 Menu Operations 1 Display the menu. Press the < M > button to display the menu. 2 Select a tab. T urn the < 6 > dial to select a tab. 3 Select the de sired item. T urn the < 5 > dial to select the item, then press < 0 >. 4 Select the setting .
42 1 Select [Langu age]. Under the [ 6 ] tab, select [ Language ] (the third item from the top), then press < 0 >. 2 Set the desired langu age. T urn the < 5 > dial to select the language, then press < 0 >. X The language will change.
43 Before You Start If the card is new or was previously formatted by another camera or personal computer , format the card with the camera. When the card is formatted, all images an d data in the card will be erased. Even protected images will be erased, so make sure there is nothing you need to keep.
44 Before You Start Y ou can change the a uto power-off time for the camera to turn off automatically after a certain period of non-operation. If you do not want the camera to turn off automatically , set this to [ Off ]. After the power turns off, you can turn on the camera again by pressing the shutter button or other button.
45 Before You Start The camera’s shooting settings an d menu settings can be revert ed to the def ault. 1 Select [C lear setting s]. Under the [ 7 ] tab, select [ Clear settings ], then pre ss < 0 >. 2 Select [Clear all cam era settings]. Tu r n t h e < 5 > dial to select [ Clear all camera settings ], then press < 0 >.
46 Before You Start If you use EOS Utility (provided so ftware) to set your copyright information, the copyright information will be added to the image’s Exif information. With the camera, the copyright information can only be viewed or deleted. If your copyright in formation has not been set, it will be grayed out on the screen.
47 2 Basic Shooting This chapter explains how to use the Basic Zone modes on the Mode Dial for best results. With the Basic Zone modes , all you do is point and shoot and the camera sets everything automatically (p.196). Also, t o prevent botched pictures due to mistaken operations, shooting settings cannot be changed in the Basic Zone modes .
48 1 Set the Mode Dial to < 1 >. 2 Aim any AF point over the subject. All the AF points will operate, and focus will generally be achieved at the AF point covering the closest object. Aiming the center AF point over the subject will make focusing easier .
49 1 Fully Automatic Shooting The focus confirmation light < o > blinks and focus is not achieved. Aim the AF poin t over an area ha ving good cont rast between light and dark, then pr ess the shut ter button hal fway (p.88) . If you are to o close to the subjec t, move away a nd try aga in.
50 Depending on the scene, position the subjec t toward the left or right to create a balanced background and good perspective. In the < 1 > (Full Auto) mode, while you press the shutter button halfway to focus a still subject, t he focus will be locked.
51 The < 2 > (Portrait) mode blurs the background to make the human subject stand out. It also makes flesh tones and the hair look softer than with the < 1 > (Full Auto) mode. The farther the distance between the subject and backgrou nd, the better .
52 Use the < 3 > (Landscape) mode for wide scenery , night scenes, or to have everything in focus from near to far. The greens and blues also become more vivid and sharper than with < 1 > (Full Auto). With a zoom lens, use t he wide-angle end.
53 When you want to photograph flowers or small things up close, use the < 4 > (Close-up) mode. T o make small things appear much larger, use a macro lens (sold separately). Use a simple background . A simple background makes the flower , etc., stand out better .
54 T o photograph a moving subject, whet her it is a child running or a moving vehicle, use the < 5 > (Sport s) mode. Use a tel ephoto le ns. Using a telephoto lens is recommend ed so you can shoot fr om afar . Use the center AF poin t to focus.
55 T o shoot someone at night and obtain a natural-looking exp osure in the background, use the < 6 > (Night Portrait) mode. Use a wide-angle lens and a tripod. When using a zoom lens, use the wide-angle end to o btain a wide night view . Also, use a tripod to prevent camera shake.
56 In places where flash photography is prohib ited, use the < 7 > (Flas h Off) mode. This mode is also effe ctive for candlelight scenes when you want to capture the ambient light. If the numeric display in th e viewfinder blinks, take care to prevent camera shake.
57 The < C > (Creative Auto) mode enables you to easily change the picture’s brightness, etc. The default settings are the same as the < 1 > (Full Auto) mode. * CA stands for Creative Aut o. 1 Set the Mode Dial to < C >. X The Creative Auto screen appears on the LCD monitor .
C Creative Auto Shooting 58 (1) Flash firing < a > (Auto firing), < D > (Flash on), or < b > (Flash off) can be selected. If you set < b >, see “D isabling Flash” on page 56. (2) Blurring/sharpening the background If you move the index mark toward the left, the background will look more blurred.
59 3 Image Settings This chapter explains imag e-related function settings: Image-recording quality , ISO spe ed, Picture S tyles, white balance, color space, etc.
60 Y ou can select the pixel count a nd the image quality . The following JPEG quality settings can be set: 73 , 83 , 74 , 84 , 76 , 86 . RA W images captured as 1 , D 1 , or D 2 must be processed with the provided software (p.62). 1 Select [Quality].
61 3 Setting the Image-recording Quality Guide to Image-recording Qualit y Settings (Approx.) Figures for the file size, possibl e shots, and maxi mum burst during continuous shooting are based on Canon’ s testing standards (ISO 100 and S tandard Picture S tyle) using a 2GB card.
62 3 Setting the Image-recording Quality The RAW image is the dat a output by the image sensor and converted to digital data which is recorded on the card as is. Y ou can select it from among 1 , D 1 , or D 2 . “RAW” written in the text will refer to all three RAW settings: 1 , D 1 , and D 2 .
63 3 Setting the Image-recording Quality Set the ISO speed (image sensor ’s s ensitivity to light) to suit the ambient light level. In the Basic Zone modes, the ISO speed is set automatically (p.64). 1 Press the < m > button. ( ) 9 2 Set the ISO speed.
64 i : Setting the ISO Speed N ISO Speed Guide If the ISO speed is set to “ A ”, the actual ISO speed to be set will be displayed when you press the shutter button halfway . As indicated below , the ISO speed will be set automatically to suit the shooting mode.
65 By selecting a Picture S tyle, you can obtain the image effects matching your photographic expression or the subject. In the Basic Zone modes (except for C ), you cannot select the Picture St y l e . 1 Press the < A > button. When the camera is ready to shoot, press the < A > button.
66 A Selecting a Picture Style N S Neutral This Picture S tyle is for users who prefer to process imag es with their personal computer . For natural colors and subdued images. U Faithfu l This Picture S tyle is for users who prefer to process imag es with their personal computer .
67 Y ou can customize a Picture Style by adjusting individual parameters like [ Sharpness ] and [ Contrast ]. T o see the resultin g effects, t ake test shots. T o customize [ Monochrome ], see the next page. 1 Press the < A > button. 2 Select a Picture Style.
68 A Customizing a Picture Style N For Monochrome, you can also set [ Filter effect ] and [ T on ing effect ] in addition to [ Sharpness ] and [ Contrast ] expla ined on the preceding page. k Filter Effect With a filter effect applied to a monochrome image, you can make white clouds or green trees stand out more.
69 Y ou can select a base Pi cture S tyle such as [ Portrait ] or [ Landscape ], adjust its parameters as d esired and register it un der [ User Def. 1 ], [ User Def. 2 ], or [ User Def. 3 ]. Y ou can create Picture S tyles whose parameter settings such as for sharpness and contrast are d ifferent.
70 A Registering a Picture Style N 6 Set the parameter . T urn the < 5 > dial to adjust the parameter as desired, then press < 0 >. For details, see “Customizing the Picture S tyle” on pages 67-68. Press th e < M > button to register the new Picture S tyle.
71 White bala nce (WB) is fo r making the wh ite areas l ook white. Normally , the < Q > (Auto) setting will obta in the correct white balan ce. If natural- looking co lors cannot be obtained with < Q >, you can select the white balance f or each ligh t source or set it manu ally by sh ooting a whi te object.
72 B : Setting the White Balance N Custom white balance enables you to manually set the w hite balance for a specific light source for bette r accu racy . Do this procedure under the actual light source to be used. 1 Photogra ph a whi te object . The plain, white object should fill the spot metering circle.
73 B : Setting the White Balance N Y ou can set the white balance’s color temperature numerically in Kelvin. This is for advanced users. 1 Select [W hite bala nce]. Under the [ 2 ] tab, select [ White balance ], then press < 0 >. 2 Set the color temperature.
74 Y ou can corre ct the white balance th at has been set. This adjustment will have the same effect as us ing a commercially-available color temperature conversion filter or color compensating filter . Each color can be corrected to one of nine levels.
75 3 White Balance Correction N With just one shot, three images having a different color tone can be recor ded simultaneously . Base d on the color te mperature of the current whi te balance setting, t he image will be bracket ed with a blue/amber bias or magenta/green bias.
76 Due to the lens characteristics, the fo ur corners of the picture might look darker . This is called lens light fall-o ff or drops in peripheral illumination. This can be corrected. For JPEG imag es, lens light fall-off is corrected when the image is captured.
77 3 Lens Peripheral Illumination Correction The camera already contains lens peripheral light correction data for about 20 lenses. In step 2, if you select [ Enable ], the peripheral ligh t correction will be applied automatical ly for any lens whose correction data has been registered in the camera.
78 Y ou can free ly create and select the folder where the captu red images are to be saved. This is optional since a folder wi ll be created automatically for saving captured images. 1 Select [Select folder]. Under the [ 5 ] tab, select [ Select folder ], then press < 0 >.
79 3 Creating and Selecting a Folder With the Select folder screen displayed, turn the < 5 > dial to select the desired folder , then pr ess < 0 >. X The folder where the captured images will be saved will be selected. Subsequent captured images will be recorded into the selected folder .
80 The file number is like the frame number on a roll of film. The captur ed images are assigned a sequential file number from 0001 to 9999 and saved in one folder . Y ou can cha nge how the file number is assigned. The file number will appear on a personal compute r in this format: IMG_0001.
81 3 File Numbering Methods The file numbering restarts from 0001 each time the card is replaced or a new folder is created. Whenever the card is replaced or a new folde r created, the file numbering starts from 0001. This is convenient if you want to organ ize images according to cards or folders.
82 The color space refers to the range of reproducible color s. With this camera, you can set the color space for captured images to sRGB or Adobe RGB. For normal shooting, sRGB is recommended. In the Basic Zone modes, sRGB is set automatically . 1 Select [Color space].
83 4 Setting the AF and Drive Modes The viewfin der has 9 AF point s. By selecting a suitable AF point, you can shoot with autofocus while framing the subject as desired. Y ou can also sele ct the AF mode and drive mode best matching the shooting conditions and subj ect.
84 Select the AF mode suiting the s hooting conditions or subject. In the Basic Zone modes, the optimum AF mode is set automatically . 1 On the lens, set the focus mode switch to <AF>. 2 Set the Mode Dial to a Creative Zone mode. 3 Press the < o > button.
85 f : Selecting the AF Mode N This AF mode is for movin g subjects when the focusing distance keeps changing. While you hold down the shu tter button halfway , the subject will be f ocused continuously . The exposure is set at the moment the picture is taken.
86 Select one of the nine AF points to autofocus. In the Basic Zone and < 8 > modes, automatic AF point selection will take ef fect automatically . Y ou cannot select the AF point. 1 Press the < S > button. ( 9 ) X The selected AF point will be displayed in the viewfinder and on th e LCD panel.
87 S Selecting the AF Point N Under low-light conditions, when you press the shutte r button halfway , the built-in flash fires a brief burst of flashes. It illuminates the subject to enable easier autofocusing. With lenses whose maxim um aperture is larger than f/5.
88 Autofocus can fail to achieve fo cus (the focus confirmation light < o > blinks) with certain subjec ts such as the following: Subjects difficult to focus Low-contrast subjects (Example: Blue sky , solid-color walls, etc.) Subjects in low light Extremely backlit or reflective subjects (Example: Car with a reflective body , etc.
89 Single and continuous drive modes are provided. In the Basic Zone modes, the optimum drive mode is set automatica lly . 1 Press the < o > button. ( 9 ) 2 Select the dr ive mode. While looking at the LCD panel, turn the < 5 > dial. u : Single shooting When you press the shutter button completely , one shot will be taken.
90 Use the self-timer when you want to be in the pictur e. The < j > (10 sec. timer) can be used in all shooting modes. 1 Press the < o > button. ( 9 ) 2 Select the self-timer . Look at the LCD panel and turn the < 5 > dial. j : 10-sec.
91 5 Advanced Operations With the Crea tive Zone modes, you can set the desired shutter speed or aperture to obtain the result you want. Y ou take control of the camera. The M icon on the right of the page title indicates that the respective feature is avail able only in the Creative Z one modes ( d , s , f , a , 8 ).
92 The camera automatically sets the shutter speed and aperture to suit the subject’s brightness. Th is is called P rogram AE. *< d > stands for Program. * AE stands for Aut o Exposure. 1 Set the Mode Dial to < d >. 2 Focus the su bject.
93 d : Program AE If the “ 30" ” shutter speed and the maximum aperture blink, it indicates underexposure. Increase the ISO speed or u se flash.
94 In this mode, you set the shutter speed and the camera automatically sets the aperture to obtain the correct exposure matching the brightness of the subject. This is ca lled shutter- priori ty AE. A faster shutter speed can freeze the action or moving subject.
95 s : Shutter-Priority AE If the maximum aperture blinks, it indicates underexposure. Tu rn t h e < 6 > dial to set a slower shutter speed until the aperture stops blinking or set a higher ISO speed. If the minimum aperture blinks, it indicates overexposure.
96 In this mode, you set the desired aperture and t he camera sets the shutter speed automatically to obtain the co rrect exposure suiting the subject brightness. This is called aperture-priority AE. A higher f/number (smaller aperture hole) will make more of the foreground a nd background fall within acceptable focus.
97 f : Aperture-Priority AE Press the depth-of-field preview b utton to stop down to the current apertur e setting. Y ou can check the d epth of field (range of acceptable focus) through the viewfinder . Depth-of-Field Previ ew N If the “ 30" ” shut ter speed blinks, it indicates underexposure.
98 In this mode, you set both the shutter speed and aperture as desired. T o determine the exposure, refer to the exposure level indicator in th e viewfinder or use a commer cially- available handheld exposure meter . This method is called manual exposure.
99 Objects in the foreground and background will be in focus automatically . All the AF points will function to detect the subject, and the aperture required to attain the necessary depth of field will be set automatically . *< 8 > stands for Auto -Depth of field.
100 The metering mode is the method of measuring the brightness of the subject. In the Basic Zone m odes, evaluative metering is set automatically . 1 Press the < n > button. ( 9 ) 2 Select the meterin g mode. While looking at the LCD panel, turn the < 6 > dial.
101 Exposure compensation is used to alter the standard exposure set by the camera. Y ou can make the image look brighte r (increased exposure) or darker (decreased ex posure). Y ou can set the exposure compensation up to ±2 stops in 1/3-stop increments.
102 By changing the shutter speed or aper ture automatically , the camera brackets the exposure up to ±2 stops in 1/3-stop increments for three successive shots. This is called AEB. 1 Select [Expo. comp./AEB ]. Under the [ 2 ] tab, select [ Expo. comp.
103 Use AE lock when the area of focus is to be dif ferent from the exposure metering area or wh en you want to take mu ltiple shots at the same expos ure setting. Press the < A > button to lock the exposure, then recom pose and take the shot. This is called AE lock.
104 When bulb i s set, the shutter stays open whil e you hold down th e shutter button comp letely , and closes whe n you let go of the shu tter but ton. Thi s is called bul b exposure. Use bulb expo sures for n ight scen es, fir eworks, th e heavens, and o ther subje cts requir ing long ex posures.
105 Bulb Exposures If you take a picture without looking at the viewfinder , light en tering the eyepiece can throw off the exposure. T o prevent this, use the eyepiece cover (p.23) attached to the camera strap. 1 Remove the eyecup. Push the bottom of the eyecup upward.
106 Although using the self-timer or Remote Switch can prevent camera shake, using mirror lockup to prevent camera vibrations ca n also help when you use a super telephoto lens or shoot close ups. When [ 8 C.Fn III -6: Mirror lockup] is set to [1: Enable] (p.
107 E-TTL II autoflash obtains high-pr ecision and consist ent flash shots. If necessary , the built-in flash will po p-up automatically in low-light or backlit conditions.
108 Using the Built-in Flash Effective Range of Bu ilt-in Flash [Approx. meters/f eet] Using the red-eye reduction lamp before taking a flash picture can reduce red eye. Red-eye reduction will work in any shooting mode except < 3 > < 7 > < 5 >.
109 Using the Built-in Flash In the same way as nor mal exposure co mpensation, you can set exposur e compensati on for fl ash. Y ou can set flash exp osure compens ation up to ±2 stops in 1/3 -stop i ncrements. 1 Press the < m > button. ( 9 ) 2 Set the exp osure comp ensation am ount.
110 Using the Built-in Flash FE (flash exposure) lock obtains and locks the correct flash exposure reading for any part of a subject. 1 Press the < D > button to pop-up the built-in fla sh. Press the shutter button halfw ay and look in the viewfinder to check that the < D > icon is lit.
111 The built-in flash and an external Speedlite can also be set with the menu. The menu for the external S peedlite will be applicable only to EX-series Speedlites whose functions can b e set with the camera . Select [F lash cont rol]. Under the [ 7 ] tab, select [ Flash control ], then press < 0 >.
112 3 Flash Control N E-TTL II For normal flash exposures, set it to [ Ev aluative ]. If [ Av e r a g e ] is set, the flash exposure will be averaged for the entire metered scene as with an external meterin g flash. Flash exposure compensation may be necessary depending on t he scene, so this setting is for advanc ed users.
113 Basically operates like a built-in f lash for easy operation. When an EX-series Speedlite is att ached to the camera, almost all the autoflash control is done by the ca mera. In other words, it is like a high- output flash attached externally in place of the built-in flash.
114 External Speedlites Sync Spee d The camera can synchronize with non-Canon compact flash units at 1/250 sec. and slower speeds. With large studio flash units, since the flash duration is longer , set the sync speed within 1/60 se c. to 1/30 sec. Be sure to test the flash synchronization before shooting.
115 6 Live View Shooting Y ou can shoot whil e viewing the picture on the camera’s LCD monitor . This is called “Live View shooti ng.” Live View shooting is effective for still subjects which do not move. If you handhold the ca mera and shoot while viewing th e LCD monitor , camera shake can cause blurred im ages.
116 Set the camera for Live View shooting. 1 Set the shoot ing mode. Set the shooting mode to a Creative Zone mode. Live View shooting does not work in Basic Zone modes. 2 Select [Live View function settings]. Under the [ 6 ] tab, select [ Live View function settings ], then press < 0 >.
117 Preparing for Live View Shooting N 5 Display the Live View image. Press the < A > button. X The Live View image will appear on the LCD monitor . Press the < A > button again to turn off the LCD monitor and return to normal shooting. Exposure simulation displays and simulates how the brightness of the actual image will look.
118 1 Use AF to focus. Press the < p > button. X The camera will focus with the current AF mode (p.121). 2 T ak e the picture. Press the shutter button completely . X The picture will be taken and the captured image is displayed on the LCD monitor .
119 Shooting N Pressi ng the < M > button will display the menu screen so you can set menu functions. Press the < M > button again to return to the Live View image. If you select [ 2 Dust Delete Data ], [ 6 Sensor cleaning ], [ 7 Clear settings ], or [ 7 Firmware V er .
120 Shooting N Each time you press the < B > button, the information display will change. About the Information Display Magnifying frame Histogram ISO speed Shots remaining Exposure level AEB ra.
121 Three AF modes are provided: [ Quick mode ], [ Live mode ] (p.123), and [ Live u mode ] (face detection) (p.124). If you want to achieve precise focusing, magnify the image and focus manually (p.127). Select the AF mode. Under [ 6 Live View function settings ], select [ AF mode ].
122 Using AF to Focus N 2 Select the AF point. Press the < o > button, then use < 9 > to select the AF point. If you keep tilting < 9 > in the same direction, it will toggle between manual and automatic AF point selection. 3 Focus the su bject.
123 Using AF to Focus N The image sensor is used to focus. Altho ugh AF is possible with the Live View image displayed, the AF operation will take longer than with Quick mode . Also, achieving focus may be more dif ficult than with Quick mode. 1 Display the Live View image.
124 Using AF to Focus N With the same AF method as with the Live mode, the human face is detected and focused. Have the person fa ce the camera. 1 Display the Live View image. Press the < A > button. X The Live View image will appear on the LCD monitor .
125 Using AF to Focus N AF operation It will take a slightly longer time to focus. Even when focus has been achieved, pressing the < p > button will focus again.
126 Using AF to Focus N Shooting conditions which can make focusin g difficult: Low-contrast subjects such as the blue sky and solid-color surfaces. Subjects in low light. S tripes and other patterns where there is contrast only in the horizontal direction.
127 Magnify the image and focus manually . 1 Set the lens focus mode switch to <MF>. T urn the lens focusing ring to focus roughly . 2 Move the magn ifying frame to the position where you wa nt to focus. Use < 9 > to move the magnifying frame.
128 Instructions for setting the [ 6 Live View function settings ] me nu’s [ Silent shoot. ] are explained below . Mode 1 The shooting operation noise is qui eter than the nor mal shooting. Continuous shooting is also possible. High- speed continuous shooting will be approx.
129 Notes about the Li ve View image Under low light or bright light condi tions, the Live View image might not reflect the brigh tness of the captured image. If the light source within the image chang es, the screen might flicker . If this happens, stop and resume the Live View shootin g under the act ual light source to be used.
130 Notes ab out Cus tom Funct ions Live View shooting will disable some Custom Functio n settings (p.173). If [ 8 C.Fn II -4: Auto Lighting O ptimizer ] (p.177) is not set to [ 3: Disable ], the image will look bright even if a decreased exposure compensation has been set.
131 7 Image Playback This chapter explain s how to playback and erase images, how to display images on a TV screen, and other playback-related fu nctions.
132 1 Playback the image. Press the < x > button. X The last captured image or last image viewed will appear . 2 Select the im age. T o playback images starting with the last image, turn the < 5 > dial counterclockwise. T o playback images starting with the first captured image, turn the dial clockwise.
133 x Image Playback About the Highlight Alert When the [ 4 Highlight alert ] menu is set to [ Enable ], overexposed highlight areas will blink. T o obtain more image detail in the overexposed areas, set the exposur e compensation to a negative amount and shoot again.
134 x Image Playback About the Histogram The brightness histogram display shows the exposur e level distribution and overall brightness. And the RGB histogra m display is for checking the color saturation and gradation. The display can be switched with the [ 4 Histogram ] menu.
135 Search for images quickly with the i ndex display showing four or nine images on one screen. 1 T u rn on the index display . During image playback, press the < I > button. X The 4-image index display will appear . The cur rently-selected image will be highlighted in a blue frame.
136 x Searching for Images Quickly With the single image display , index display , and magnified view , you can turn the < 6 > dial to jump through the images. 1 Select the ju mp method. With the [ 4 Image jump w/ 6 ] menu’s [ 1 image/10 images/100 images/Screen/Date/Folder ] option, you can set the desired jump method.
137 Y ou can magnify the ima ge by 1.5x to 10x on the LCD monitor. 1 Magnify the image. During image playback, press the < u > button. X The image will be magnified. T o increase the magnification, hold down the < u > button. The image will continue to be magnified until it reaches the maximum magnification.
138 Y ou can rotate the image to the desired orientation. 1 Select [Rotate]. Under the [ 3 ] tab, select [ Rotate ], then press < 0 >. 2 Select the im age. T urn the < 5 > dial to select the image to be rotated. Y ou can also select an image on the index display .
139 Y ou can playba ck the images in the card as an automatic slide show . 1 Select [Slide show]. Under the [ 4 ] tab, select [ Slide show ], then press < 0 >. X The slide show setting screen appears. 2 Select the images to be played back. T urn the < 5 > dial to select the item, then press < 0 >.
140 3 Auto Playback (Slide Show) 3 Set the Play time and Repeat options. T urn the < 5 > dial to select [ Set up ], then press < 0 >. Set the [ Play time ] and [ Repeat ] options, then press the < M > button. 4 St art the slide sh ow .
141 Y ou can also view the images on a TV set. Turn off the camera and the television before connecting them. * Depending on the TV monitor , part of the image might be cut of f. 1 Connect the provi ded video cable to the camera . Connect the video cable to the camera’s < VIDEO O UT > terminal.
142 Viewing the Images on TV The HDMI Cable HTC-100 (sold separately) is required. 1 Connect the HDMI cable to the camera. Connect the HDMI cable to the camera’s < D > terminal. With the plug’s < d HDMI MINI > logo facing the front of the c amera, insert it into the camera’ s < D > terminal.
143 Protecting the image prevents it from being erased accidentally . 1 Select [Pr otect images]. Under the [ 3 ] tab, select [ Protect images ], then press < 0 >. X The protect setting screen will appear . 2 Select the im age and pro tect it. T urn the < 5 > dial to select the image to be protected, then pre ss < 0 >.
144 Y ou can either select a nd erase images one by one or erase them in one batch. Protected images (p.143) will not be erased. Once an image is erased, it canno t be recovered. Make sure you no longer need th e image before erasing it. T o preve nt important images from being erased accidentally , protect it.
145 Y ou can adjust the brightness of the LCD monitor to make it easier to read. 1 Select [L CD brightn ess]. Under the [ 6 ] tab, select [ LCD bright ness ], then press < 0 >. 2 Adjust the bri ghtness. While referring to the gray chart, turn the < 5 > dial, then press < 0 >.
146 Changing Image Playback Settings V ertica l images are rotated automatically so they are displayed vertically on the camera’s LCD monitor and personal computer instead of horizontally . The setting of this fe ature can be changed. 1 Select [Auto rot ate].
147 8 Sensor Cleaning The camera has a Self Cleaning Se nsor Unit attached to the image sensor ’s front layer (low-pass filter) to shake off dust automatically . The Dust Delete Data can also be appended to the image so that the dust spots remaining can be erased automatically by Digital Photo Professional (pro vided software).
148 Whenever you set the power switch to < 1 / J > or < 2 >, the Self Cleaning Sensor Unit operates to aut omatically sh ake off the dust on the front of the sensor . Normally , you need not be aware of this operation. However , you can execute t he sensor cle aning at anytime as well as disable it.
149 Normally , the Self Cleaning Sensor Unit will eliminate most of th e dust that might be visible on captured images. However , in case visible dust still remains, you can append the Dust Delete Data to the image to later erase the dust spots.
150 3 Appending Dust Delete Data N 3 Photogra ph a solid-wh ite object. At a d istanc e of 20 cm - 30 cm / 0.7 ft. - 1.0 ft., fill the viewfinder with a patternless, solid-white object and t ake a picture. X The picture will be taken in the aperture-priority AE mode with an aperture of f/22.
151 Dust which could not be removed by the automatic sen sor cleaning can be removed manually with a blower , etc. The surface of the image sensor is e xtremely delicate. If the sensor needs to be cleaned d irectly , having it done by a Canon Service Center is recommended.
152 3 Manual Sensor Cleaning N While cleaning the sensor , never do any of the following. Doing any of the following will cut off the po wer and close the shutter . The shutter curtains and image sensor might get damaged. • Setting the power switch to < 2 >.
153 9 Printing Images and Transferring Images to a Computer Printing (p.154) Y ou can connect the camera directly to a printer and print out the images in the card. The camera is compatible with “ w PictBridge” which is the standard for direct printing.
154 Y ou do the direct prin ting procedure entirely wi th your camera while you look at the LCD monitor. 1 Set the camera’ s power switch to < 2 >. 2 Set up the printer . For details, see the printer ’s instruction manual. 3 Connect the camera to the printer .
155 Preparing to Print 6 Playback the image. Press the < x > button. X The image will appear , and the < w > icon will appear on the upper left to indicate that the camera is connected to a printer . X The < l > button lamp will light in blue.
156 The screen display and setting o ptions will differ depending on the printe r . Some settings might not be avai lable. For details, see the printer ’s instruction manual. 1 Select the im age to be printed. Check that the < w > icon is displayed on the upper left of the LCD monitor .
157 w Printing Select the size of the paper loaded in the printer , then press < 0 >. X The paper type screen will appear . Select the type of the paper loaded in the printer , then press < 0 >. When using a Canon printer and Canon paper , read the printer ’s instruction manual to check what paper types can be used.
158 w Printi ng 4 Set the printing effects. Set as necessary . If you need not set any printing effects, go to step 5. The screen display may diffe r dependi ng on the pri nter . Select the option on the upper right, then press < 0 >. Select the desired printing effect, then press < 0 >.
159 w Printing 5 Set the date and file number imprinting. Set as necessary . Select < I >, then press < 0 >. Set as desired, then press < 0 >. 6 Set the number of copies. Set as necessary . Select < R >, then press < 0 >.
160 w Printi ng In step 4 on page 158, select the printing effect. When the < e > icon is displayed next to < z >, press the < B > button. Y ou can then adjust the printing effect. What can be adjusted or what is displayed will depend on the selection made in step 4.
161 w Printing Y ou can crop the ima ge and print only the trimmed portion as if the image was recomposed. Do the trimming right before printing. If you set the trimming and then set the print settings, you may have to set the trimming again. 1 On the print setting screen, select [T rimming].
162 w Printi ng Depending on the print er , the trimmed image area might not be printed as you specified. The smaller you make the trimming frame, the grainier the picture will look on the pr int. While trimming the image, look at t he camera’s LCD monitor .
163 Y ou can set the pr int type, date imprinting, and file No. imprinting. The print settings will be applied to al l print-order ed images. (They cannot be set individually for each image.) 1 Select [Pri nt order]. X Under the [ 3 ] tab, select [ Print order ], then press < 0 >.
164 Digital Print Order Format (DPOF) 4 Exit the setting. Press the < 7 > button. X The print order screen will reappear. Next, select [ Sel.Image ], [ By n ], or [ All image ] to order the images to be printed. Print typ e K S tandar d Prints one image on one sheet.
165 Digital Print Order Format (DPOF) Sel.Image Select and order images one by one. Press the < I > button to display the three-image view . T o return to the single- image display , press the < u > button. After completing the print order , press the < M > button to save the print order to the card.
166 With a PictBridge printer , you can easily print images with DPOF . 1 Preparing to print. See page 154. Follow the “Connecting the Ca mera to a Printer” procedu re up to step 5. 2 Under the [ 3 ] tab, select [Print order]. 3 Select [Print]. [ Print ] will be displayed only if th e camera is connected to the printer and printing is possible.
167 By connecting the camera to a perso nal computer , you can tr ansfer images from the camera’s card by operating the camer a. This feature is called direct image transfer . Before connecting the camera t o a personal computer, be sure to install the provided software (EOS DIGIT AL Solution Dis k on CD-ROM) in t he personal com puter .
168 d Transferring Images to a Personal Computer The images sent to the personal computer will be saved in the [ My Pictures ] folder or [ Pictures ] folder in subfolders organized according to shooting date. All images This is to transfer all the images in the card to the personal computer.
169 d Transferring Images to a Personal Computer Options other than [ All Images ] are exp lained below . T o start the image transfer , press the < l > button. New images Images which have not yet been transferred to the perso nal computer will be selected by the camera automatically and transferred.
170 d Transferring Images to a Personal Computer Under the [ 3 ] tab, you can use [ T ransfer order ] to select the images to be transferred to a personal computer . When y ou select [ T ransf er order images ] on page 169, you can transfer the images set by the transfer order .
171 10 Customizing the Camera With Custom Functions, you can change the camera functions according to your preference. Also, the current camera settings can be saved under the Mode Dial’s < w > and < x > positions. The functions explained in this chap ter apply to Creative Z one modes .
172 1 Select [ 8 ]. T urn the < 6 > dial to select the [ 8 ] tab. 2 Select the gr oup. T urn the < 5 > dial to select C.Fn I - IV , then press < 0 >. 3 Select the Custom F unction number . T urn the < 5 > dial to select the Custom Function No.
173 3 Custom Functions N C.Fn I: Exposure 1 Exposure level increment s p.174 2 ISO speed setting incremen ts 3 ISO expansion 4 Bracketing auto cancel 5 Bracketing sequence p.175 6 Safety shift 7 Flash sync. speed in Av mode C.Fn II: Image 1 Long exposure noi se reduction p.
174 3 Custom Function Settings N C.Fn I: Exposure C.Fn I -1 Exposure level inc rements 0: 1/3-stop 1: 1/2-stop Sets 1/2-stop incr ements for the shut ter speed, ap erture, exp osure compensatio n, AEB, etc. Effecti ve when you pr efer to control the exposure in less fine in crement s than 1/ 3-stop incr ements.
175 3 Custom Function Settings N C.Fn I -5 Bracketing seque nce The AEB shootin g sequence an d white balance b racketing se quence can be changed. 0: 0, -, + 1: -, 0, + C.Fn I -6 Safety shift 0: Disable 1: Enabl e (Tv/Av) This works in the shutter -priority A E (Tv) and a perture-prior ity AE (A v) modes.
176 3 Custom Function Settings N C.Fn II: Image C.Fn II -1 Long exposu re noise reducti on 0: Off 1: Auto For 1 sec. or lo nger exposure s, noise re duction is per formed automatica lly if noise typical of l ong exposur es is detect ed. This [ Auto ] setting is effective in most ca ses.
177 3 Custom Function Settings N C.Fn II -3 Highlight to ne priority 0: Disable 1: Enable Improves the highlight d etail. The dynamic ra nge is expanded fro m the standa rd 18% gray to b right highlig hts. The gradation be tween the gray s and highlights become s smoother .
178 3 Custom Function Settings N C.Fn III: Auto focus/Drive C.Fn III -1 Lens d rive when AF impossib le If autofocu s is executed, but focus cannot be achi eved, the camer a can either ke ep trying to focus or s top. 0: Focus search on 1: Focus search off Prevents the camer a from becoming grossly out of focus as it at tempts to focus agai n.
179 3 Custom Function Settings N C.Fn III -3 AF point selection method 0: Normal Press the < S > butt on and use < 9 > to select the AF po int. 1: Multi-controlle r direct Without pres sing the < S > button first, you ca n just use < 9 > to select the desired AF point.
180 3 Custom Function Settings N C.Fn III -6 Mirror lockup 0: Disable 1: Enable Prevents camera vi brations caus ed by the refl ex mirror acti on which can disturb sho oting with supe r telephoto lenses or clos e-up (macro) shooting. See page 106 for the mirror loc kup proced ure.
181 3 Custom Function Settings N C.Fn IV: Operatio n/Others C.Fn IV -1 Shutter bu tton/AF-ON bu tton 0: Metering + AF start 1: Metering + AF start/AF stop During autofo cusing, you ca n press the < p > button to stop the autofocusi ng.
182 3 Custom Function Settings N C.Fn IV -3 Assign SET button Y o u can assign a fr equently- used function t o < 0 >. When the camera is ready to sh oot, you can pres s < 0 >. 0: Normal (disabled) 1: Image quality Press < 0 > to display th e image-re cording qual ity settin g screen on t he LCD monitor .
183 3 Custom Function Settings N C.Fn IV - 5 Focusi ng Screen If you change t he focusing sc reen, chan ge this sett ing to match th e focusing scr een type.
184 3 Custom Function Settings N C.Fn IV -6 Add original decision dat a 0: Off 1: On Data for verifying whether the image is origin al or not is appe nded to the image automat ically . When the shooti ng informatio n of an image appended wit h the verifi cation data is displ ayed (p.
185 For faster access, you can register up to six menus and Custom Functions whose settings you change frequently . 1 Select [My Menu settings]. Under the [ 9 ] tab, select [ My Menu settings ], then pre ss < 0 >. 2 Select [R egister]. T urn the < 5 > dial to select [ Register ], then press < 0 >.
186 Under the Mode Dial’s < w > and < x > positions, you can register most of the current camera settings cont aining your pr eferred shooting mode, menus, Custom Function settings, etc. 1 Select [Camera use r setting]. Under the [ 7 ] tab, select [ Camera user setting ], then press < 0 >.
187 11 Reference This chapter provides reference information for camera features, system accessories, etc. The back of this chapter also has an index to make it easier to look up things.
188 When the camera is ready to shoot, press the < B > button and “Camera settings” and “Shooting func tions” screens w ill appear . When “Shooting functions” is displa yed, you can set the shooting functions while looking at the LCD monitor .
189 B Checking Camera Settings When you press < 9 > straight down, the Quick Control screen appears (p.38). If you press the < m >, < o >, < n >, or < S > button, the setting screen will appear on the LCD monitor and yo u can turn the < 6 > or < 5 > dial to set the resp ective function.
190 With AC Adapter Kit ACK-E2 (sold separately), you can conn ect the camera to a household power outlet and not worry about the battery level. 1 Connect the DC plug. Connect the DC Coupler ’s plug to the AC adapter ’s socket. 2 Connect the power cord.
191 The date/time (back-up) battery maintains the camera’s date and time. Its service life is about 5 years. If the date/time is reset when the battery is replaced, replace the back-up battery with a new CR2 016 lithium battery as described below . The date/time setting will also be reset, so be sure to s et the correct date/tim e.
192 These are supplemental instructions for using Battery Grip BG-E2 with this camera. For instructions other than “Detaching the Battery Compartment Cover” and “Battery Life” explained below , refer to the Battery Grip BG-E2 Instruction Manual.
193 1 Shooting 1 (Red) Page 2 Shooting 2 (Red) 3 Playback 1 (Blue) Menu Settings Quality 73 / 83 / 74 / 84 / 76 / 86 1 / D 1 / D 2 60 Red-eye On/Off Off / On 108 Beep On / Of f - Shoot w/o card On / Off 29 Review time Off / 2 sec. / 4 sec. / 8 sec. / Hold 145 Peripheral illumi n.
194 Menu Settings 4 Playback 2 (Blue) Page 5 Set-up 1 (Y ellow) 6 Set-up 2 (Y ellow) * If you previously used a WFT -E3/E3A with the EOS 40D, you can u se the WFT - E3/E3A with the EOS 50D af ter upgrading the WFT -E3/E3A firmware. Highlight alert Disable / Enable 133 AF point disp.
195 Menu Settings 7 Set-up 3 (Y ellow) Page 8 Custom Function s (Orange) 9 My Menu (Green) INFO. button Norma l disp. / Camera set. / Shoot. fun c. 188 Flash control Flash firing / Built-in flash fu nction setting / External flash function set ting / External flash C.
196 o : Set automaticall y k : User selectable : Not selectable Function Availability Table k k k o o o o o o o o k k k o o o o o o o o k k k o o o o o o o o k k k o o o o o o o o k k k o o o o o o o .
197 Function Availability Table o : Set automaticall y k : User selectable : Not selectable o o k o k o o k o k o o k o k o o k o k o o k o o o k o k k k k k k k k k k k k k k k k k k k o k k k k k k .
198 If there is a problem, first refer to this Troubleshooting Guide. If this T roubleshooting Guide does not reso lve the problem, contact your dealer or nearest Canon Service Center. Do not recharg e any battery pack other than genu ine Canon Batter y Pack BP-51 1A, BP-514, BP-5 1 1, or BP- 512.
199 Troubleshooting Guide The card i s not pr operly ins erted (p.29) . If the card is f ull, replace t he card or dele te unnecessar y images to make room (p.29, 144) . If you try t o focus in the One-Sho t AF mode while the focus confirmation light < o > in the viewfinder bl inks, a pict ure cannot be taken.
200 Troubleshooting Guide When using Liv e View shooting, use a memory card (a hard disk-type card such as Mic roDrive is no t recommende d). A hard disk -type card requires a lower temper ature range for operat ion than nor mal memory cards.
201 If there is a problem with the ca mera, an error message appears. Follow the on- screen instructions. T o recover from the error scr een, turn the power switch < 2 > and < 1 >, or remove and reinstall the battery . If error 02 (Card problem) is displayed, remove and reinstall the card or format the card.
202 System Map 220EX ST -E2 430EX II 580EX II Macro Ring Lite MR-14EX Macro T win Lite MT -24EX Eyecup Eb Rubber Frame Eb Eyepiece Extender EP-EX15 Angle Finder C Date / time CR2016 lithium battery E-.
203 System Map HDMI Cable HTC-100 Timer Remote Controller TC-80N3 Remote Switch RS-80N3 Wireless Controller LC-5 EF-S lenses EF lenses CF card Card reader PCMCIA adapter Interface Cable IFC-200U Interface Cable IFC-500U Wireless File T ransmitter WFT -E3/WFT -E3A (Firmware V er .
204 •T y p e T ype: Digital, single-lens reflex, AF/AE camera with built-in flas h Recording media: Type I or II CF card, UDMA-compati ble Image sensor size: 22.3 x 14.9 mm Compatible lenses: Canon EF lens es (including EF-S lenses) (35mm-equival ent focal length is approx.
205 Specifications • Viewfinder T ype: Eye-level pentaprism Coverage: V ertical/Horizontal approx. 95% Magnification: Approx. 0.95x (-1 m -1 with 50mm lens at infini ty) Eye point: Approx. 22 mm (From eyepiece lens center at -1m -1 ) Built-in dioptric adjustment : -3.
206 Specifications •S h u t t e r T ype: Electronically-controlled, focal-plan e shutter Shutter speeds: 1/8000 sec. to 1/60 sec. (Full Auto mode), X-sync at 1/250 sec. 1/8000 sec. to 30 sec., bulb (T otal shutter speed range . Available range varie s by shooting mode.
207 Specifications •L C D M o n i t o r T ype: TFT color liquid-crystal monitor (Brightne ss adjustable to 7 levels) Monitor size and dots: 3-in. with approx.
208 Specifications • Dimensions and Weight Dimension s (W x H x D) : 145.5 x 107.8 x 73.5 mm / 5.7 x 4.2 x 2.9 in. Weight: Approx. 730 g / 25.7 oz. (body only) • Operation Environ ment Working tem.
209 Specifications • EF-S18-20 0mm f/3.5-5. 6 IS Angle of view: Diagonal extent: 74°20’ - 7°50’ Horizont al extent: 64 °30’ - 6°30’ V ertical extent: 45°30’ - 4°20’ Lens construction: 16 elements in 12 group s Minimum aperture: f/22 - 36 Closest focusing distance : 0.
210 Specifications • EF28-135mm f/3 .5-5.6 IS USM Angle of view: Diagonal extent: 75° - 18° Horizontal ext ent: 65° - 15° V ertical extent: 46° - 10° Lens construction: 16 elements in 12 groups Minimum aperture: f/22 - 36 Closest focusing distance : 0.
211 T rademar ks Adobe is a trademark of Adobe Systems I ncorporated. CompactFlash is a tradema rk of SanDisk Corporation. Windows is a trademark or registered trademar k of Microsof t Corporation in t he United S tates and other countries. Macintosh and Mac OS is a trademark or register ed trademark of Apple Inc.
212 Safety Warnings Follow these safeguards and use the equip ment properly to prevent injury , death, and material damage. Preventing Serious Injury or Death • T o prevent fire, excessive heat , ch.
213 • If you dro p the equipment and the casing breaks open to expose the internal parts, do not touch the internal parts due to the possibility of electrical shock. • Do not disasse mble or modify the equipment. High-voltage internal parts can cause electrical shock.
214 Digital Camera Model DS12621 1 Systems This device complies with Par t 15 of the FCC Rules. Operation is subje ct to the following two conditions: (1 ) This device may not cause harmful interference, and (2) this device must accept any int erference received, including interference t hat may cause undesired operat ion.
215 IMPORT ANT SAFETY INSTRUCTIONS 1. SA VE THESE INSTRUCTIONS — This manual contains import ant safety and operating instructio ns for Battery Charger CG-580 & CB-5L. 2. Before using t he charger , read all in structions and cautionary remarks o n (1) the charger , (2) the battery pack, and (3) the pro duct using the battery pack .
216 MEMO C OP Y.
217 MEMO C OP Y.
218 MEMO C OP Y.
219 MEMO C OP Y.
220 MEMO C OP Y.
221 MEMO C OP Y.
222 MEMO C OP Y.
223 A AC Adapt er Kit ..... ........... ............. . 190 Access lamp.. ............. ............. ........ 3 0 A-DEP (Automatic depth-of-fie ld AE) ..........99 Adobe RGB ........ ............. .......... ...... 82 AE lock .. ............. .......
224 Index D Date J Date/Time Date/Time .................. .............. ....... 4 2 Date/time batter y replacement ... 191 Depth-of-fie ld preview ........... .......... 97 Dioptric adj ustment .... .............. ....... 3 4 Direct printing J Printin g Drive mode .
225 Index Hi-Definition .... ............. ............. .... 142 Highlight aler t .. ........... ............. ...... 133 Highlight detail los s ...... ........... ...... 133 Highlight ton e priority ... ............. .... 177 Histogram... ..........
226 Index Meterin g mode ......... .......... ... 100, 189 Evaluative / Partial / Spot / Center-weighted aver age MF (Manual focusing) ..................... 88 Mirror lock up .... .......... ........... 10 6, 180 Mode Dial J Shooting mode Monochrome image .
227 Index Revert to de fault settings ................ 4 5 Review time .................... ............. . 145 Rotate (image) ............. . 138, 146, 161 S Safety shift . ............. ............. ......... 175 Safety warnin gs ......... ........
This Instruction Manual booklet is current as of August 2008. For information on the camera’s compatibility with any accessories and lenses introduced after this date, contact any Canon Service Center . CT1-1026-000 © CANON INC. 2008 PRINTED IN JAP AN CANON INC.
デバイスCanon EOS50DBODYの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Canon EOS50DBODYをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCanon EOS50DBODYの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Canon EOS50DBODYの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Canon EOS50DBODYで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Canon EOS50DBODYを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCanon EOS50DBODYの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Canon EOS50DBODYに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCanon EOS50DBODYデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
