CanonメーカーMP800Rの使用説明書/サービス説明書
ページ先へ移動 of 188
QT5-0266-V03 XXXXXXXX ©CANON INC. 2006 PRINTED IN THAILAND User ’ s Guide User ’ s Guide QT5-0266-V03 ENG The following ink tanks are compatible with this machine. For details on ink tank replacement, refer to “Replacing Ink T anks” in this guide.
Getting Help from Canon Help Us Help Y ou Better Before you cont act Canon, please record the following in formation. Serial Number (located on the inside of the product): ________________ ____ Model .
T able of Content s 1 Copyright .... ......................... ........................... 3 Disclaimer ... ............................ ........................ 3 Model Name ........................... ........................ 3 Trademarks..... .....
2 Cannot Connec t to the Computer Properly .......... ........................ .................... 148 Problems Scanning... ............................ ...... 14 9 Cannot Scan Films ........................ ............. 156 An Error Messag e Appears on the Screen .
3 Canon MP800R User ’ s Gu ide Copyright This manual is copyrighted by Canon Inc. with all rights reserved. Under the copyright laws, this manual may not be reproduced in any form, in whole or in part, without the prior written consent of Canon Inc.
4 T rademarks z “Windows” and “Internet Explorer” ar e trademarks of Microsoft Corporation, registered in the United S tates and other countries. z “Macintosh” and “Mac” are trademarks of Apple Computer, Inc., registered in the U.S. and other countries.
5 How to Use the Document ation Provided Setup Guide (Printed documentation) Be sure to read this guide first. This guide includes instructions for setting up your machine and getting it ready for use. User ’ s Guide (This guide) Read this guide when starting to use the machine .
6 Safety Precautions Please read the safety warnings and cautions prov ided in this guide to ensure that you use your machine safely . Do not attempt to use the machine in any way not described in this guide. Wa rn i n g Y ou may cause an electric shock/fire or damage the machine if you ignore any of these safety precautions.
7 Handling Do not attempt to disassemble or modify the machine. There are no user serviceable p arts inside the machine. The machine contains high-volt age components. Never attempt any maintenance procedure not described in this guide. Incorrect maintenance procedures may damage the machine, or cause a fire or electrical shock.
8 Power supply Never remove the plug by pulling on the cord. Pulling on the power cord may damage the cord and cause a fire or electrical shoc k. When turning OFF the power , be sure to press [ON/OFF ] or unplug the machine.
9 Handling Close the Document Cover gently to avoid catching your hand. Failing to do so may result in personal injury . Do not press down hard on the Document Cover when using the Platen Glass to scan thick books. This may damage the Platen Glass and Document Cover and/or result in personal injury .
10 Print Head/Ink tanks For safety reasons, store print heads and ink tanks out of the reach of small children. If a child ingests any ink, consult a doctor immediately . Do not shake print heads or ink tanks. Ink may leak out and stain clothing or the surrounding area.
11 Reading the Document Symbols Used in This Guide Please read the list below of symbols used in this guide. The following symbols are used to indicate important instructions. Be sure to obey these instructions. Wa rn i n g Indicates a warning concerning operations that ma y lead to death or injury to persons if not performed correctly .
12 Legal Limit ations on Use of Y our Product and Use of Images It may be unlawful to make copies of, scan, print or use reproductions of the following documents. The list provided is non-exhau stive. When in doubt, check with a legal representative in your jurisdiction.
Chapter 1 Chapter 1 13 Before Printing Before Printing Main Component s and Their Functions Front V iew (1) D ocument Cover Open this cover when loading a document on the Platen Glass.
14 Chapter 1 Before Printing (9) P aper Output T ray Open this tray before copying or printing by pressin g the Open button. However , even if it is closed, the tray will open automatically when copying or printing is started. Close the tray when it is not in use.
Chapter 1 15 Before Printing Rear V iew and Interior (17) Print Head Lock Lever Used to fix the Print Head. (18) Ink T ank Lamp Lights or flashes red to indicate the status of the ink t ank. Y ou can check the status of each ink tank according to the way its lamp flashes.
16 Chapter 1 Before Printing (24) Duplexing T ransport Un it Open when clearing jammed paper after pulling out the Cassette. (25) Power Connector This is the connector used to connect the pr ovided power cord. (26) Rear Cover Open when clearing jammed paper .
Chapter 1 17 Before Printing (4) [PHOTO/FILM] Switches the machine to Photo/film mode. (5) [ MEMOR Y CARD] Switches the machine to Memory card mode. (6) L CD (Liquid Cryst al Display ) Displays messages, menu selections, and the operation status. (7) [Menu] Used to display menus.
18 Chapter 1 Before Printing T urning the Machine ON and OFF T urn on the machine before starting printing. T urning on the Machine Before turning on the machine, confirm that the Print Head and ink tanks are set into place. 1 Press [ON/OFF]. [COPY] flashes green for a while, and then turns on.
Chapter 1 19 Before Printing The Screen-sav er Mode The LCD goes out if the machine is not operated for 5 minutes. Press any button to restore the display . Y ou cannot change the period before the LCD goes out. Loading Document s to Copy or Scan This section describes how to lo ad the document on the Platen Glass.
20 Chapter 1 Before Printing 3 Gently close the Document Cover . Loading Paper This section describes how to load paper in the Auto Sheet F eeder and the Cassette. Paper Handling z Recommended Paper and Requirements Note z The machine cannot scan the area within about 0.
Chapter 1 21 Before Printing Paper having a “Model Number” is Canon specialty m edia. Y ou may not be able to p urchase some Canon branded paper depending on your country . *1 Paper is not sold in the US by Model Number . Purchase paper by the name.
22 Chapter 1 Before Printing z Media types yo u cannot use Do not use the following types of paper . Using such paper will not only produce unsatisfactory results, but can also cause the machine to jam or malfunction.
Chapter 1 23 Before Printing About the Auto Sheet Feeder and the Cassette Y ou can lo ad p aper in b oth the Auto Sheet Feeder and Cassette. Loading paper in the Auto Sheet Feeder is easy , and is convenient if you frequent ly switch to and print on various sizes or types of paper .
24 Chapter 1 Before Printing z Continuous printing on t he same type/size of p aper by using both the Auto Sheet Feeder and Cassette together If the Auto Sheet Feeder or Cassette runs out of paper , the paper source au tomatically switches to the other one.
Chapter 1 25 Before Printing Loading the Print Med ia in the Auto Sheet Feeder z Loading Paper 1 Flatten the four corners of the paper before loading it. 2 Prepare to load paper . (1) Open the Paper Support, then pull out the Paper Support Extension to support the paper .
26 Chapter 1 Before Printing (4) Press [Feed Switch] so that the Auto Sheet Feeder Lamp (A) lights. 3 Load the paper . (1) Load the paper into the Auto Sheet Feeder with the print side facing UP . (2) Align the paper stack against the Cover Guide on the right side of the Paper Support.
Chapter 1 27 Before Printing z Loading Envelopes Use either European DL or US Comm. Env . #10 size envelopes. The address is rotated automatically to match the direction of the envelope when printing.
28 Chapter 1 Before Printing 4 Select [Envelope] in [Media T ype], and then select [DL Env .] or [Comm. Env . #10] in [Page Size]. For information on the printer driver settin gs, refer to the Printer Driver Guide .
Chapter 1 29 Before Printing 4 When performing copy direct printin g without using a computer , press [Settings] to select the page size. When usin g the machine connected to a computer , select the page size of the loaded paper from [Page Size] in the printer driver .
30 Chapter 1 Before Printing Loading the Print Med ia in the Cassette Depending on page size and media type, some paper must always be loaded in the Auto Sheet Feeder . If you intend to use only the Cassette, check any usage restrictions in advance.
Chapter 1 31 Before Printing 3 Load the paper . (Print side facing DOWN) (1) Load the paper into the Cassette with the print side facing DOWN. (2) Align the paper stack against the right side of the Cassette. (3) Slide the Paper Guides to fit the loaded paper stack.
32 Chapter 1 Before Printing 4 Insert the Cassette into the machine. (1) Set the Cover on the Cassette. (2) Insert the Cassette into the machine. Push the Cassette all the way into the machine. 5 Prepare the Paper Output T ray . (1) Press the Open Button to open the Paper Output Tray .
Chapter 1 33 Before Printing z Loading Envelopes Use either European DL or US Comm. Env . #10 size envelopes. The address is rotated automatically to match the direction of the envelope when printing. 1 Align the envelope stack against the right side of the Cassette with th e print side facing DOWN, and the rear flaps UP on the left side.
34 Chapter 1 Before Printing 4 Select [Envelope] in [Media T ype], and then select [DL Env .] or [Comm. Env . #10] in [Page Size]. For information on the printer driver settin gs, refer to the Printer Driver Guide .
Chapter 1 35 Before Printing 5 When performing copy direct printin g without using a computer , press [Settings] to select the page size. When usin g the machine connected to a computer , select the page size of the loaded paper from [Page Size] in the printer driver .
36 Chapter 1 Before Printing 2 Select the Setting tab. (1) Use [ ] or [ ] to select the Setting tab. Select tab 1 here. 3 Select the setting item. (1) Use [ ] or [ ] to select the setting item. Select <A4> here. 4 Change the se tting. (1) Use [ ] or [ ] to change the setting.
Chapter 1 37 Before Printing Print Setting Items Each tab contains the following setting items. T o change the tab, use [ ] to select the tab and use [ ] or [ ]. z Copy mode This section describes the Settings screen for Copy mode. Ta b 1 Y ou can sp ecify the p aper se ttings for printing or print quality .
38 Chapter 1 Before Printing z Memory card and Photo/film modes This section describes the Settings screen for Memory card and Photo/film modes. Ta b 1 Y ou can sp ecify the settings such as the paper , bordered/borderless, and Date/file no. Example: Memory card mode (1) Select the page size.
Chapter 1 39 Before Printing Ta b 2 Allows you to optimize photos with the functions below. (1) Red eye correction ON, Red eye correction OFF *1 When <Red eye correction ON> is selected, portraits with a red eye caused by flash photography are corrected in pr int.
Chapter 2 40 Chapter 2 Copying Copying Making Copies This section describes the basic procedure to make copies. 1 Prepare for copying. (1) Press [ON/OFF] to turn on the machine. See “T urning on the Machine” on p age 18 . (2) Press [COPY]. (3) Load paper .
Chapter 2 41 Copying (3) Press [Color] for color copying, or [Black] for black & white copying. The machine starts copying. Reducing or Enlarging a Copy Y ou can redu ce or enlarge copies. 1 Prepare for copying. See “Prepare for copying.” on page 40 .
42 Chapter 2 Copying Changing the Copy Settings Y ou can change the copy settings such as the page size, media type, or print quality . For details on changing the copy settings and setting items, see “T o Change Print Settings” on page 35 . 1 Y ou can specify the page size.
Chapter 2 43 Copying Using Useful Copy Functions Spec ial Copy Y ou can copy in various layouts. 1 Prepare for copying. See “Prepare for copying.” on page 40 . 2 Select the copy menu. (1) Press [Menu]. (2) Use [ ] or [ ] to select <S pecial copy>, then press [OK].
44 Chapter 2 Copying z Copying T wo Pages to Fit onto a Single Page (2-o n-1 copy) This feature enables you to copy two docume nt s (A) ( B) onto a single sheet (C) of paper by reducing each image. Procedure: (1) Display the S pecial copy screen . See “S pecial Copy” on page 43 .
Chapter 2 45 Copying z Copying Four Pages to Fit onto a Single Page (4-on-1 copy) This feature enables you to copy four documents onto a single sh eet of p aper by reducing each image. Four types layouts can be selected. Procedure: (1) Display the S pecial copy screen .
46 Chapter 2 Copying z Copying without Borders (Bord erless copy) This feature enables you to copy images so that they fill the entire page without borders. Procedure: (1) Display the S pecial copy screen . See “S pecial Copy” on page 43 . (2) Use [ ] or [ ] to select <Borderless copy>, the n press [OK].
Chapter 2 47 Copying (5) Press [ ] to move the cursor to the right. (6) Use [ ] or [ ] to set the horizontal repeat s, then press [OK]. (7) S pecify the necessary items. See “T o Change Print Settings” on page 35 . (8) Press [Color] for color copying, or [Black] for black & white copying.
Chapter 3 48 Chapter 3 Printing fro m a Memory Card Printing from a Memory Card Using the Memory Card This section describes the compatible memory cards and how to insert and remove them. Memory Cards Supported by This Machine The following memory cards are compatible with this machine .
Chapter 3 49 Printing from a Memory Card *1 Requires purchase of a separate compact flash card adapter for xD-Picture cards. *2 Use the special adapter provided with the card. Inserting the Memory Card 1 Press [ON/OFF] to turn on the machine. See “T urning on the Machine” on page 18 .
50 Chapter 3 Printing fro m a Memory Card 3 Insert a memory card into the Card Slot. * Be sure to attach the memory card to the special adapter before inserting it into the Card Slot.
Chapter 3 51 Printing from a Memory Card Removing the Memory Card 1 Open the Ca rd Slot Cover . 2 Ensure that the Access Lamp is not flashing, then remove the memory card. 3 Close the Card Slot Cover . Printing Photograph Let’s select a photo from the photos stored on the memory card of the digital camera, and print it.
52 Chapter 3 Printing fro m a Memory Card 2 Select the print me nu. (1) Press [MEMOR Y CARD]. (2) Use [ ] or [ ] to select <Single-photo pr int>, then press [OK]. The photo selection screen is displayed. 3 Select the photo you want to print. (1) Use [ ] or [ ] to display the photo you want to pr int.
Chapter 3 53 Printing from a Memory Card 4 S tart printing. (1) Check the page size and media type. (2) Use [ ] or [ ] to specify the number of prints. (3) Press [Color]. The machine starts printing. Specifying Ho w Many Copies to Print for Each Photo (Multi-photo print) Y ou can sp ecify the number of print s to be made for each pho to.
54 Chapter 3 Printing fro m a Memory Card (4) Press [OK]. The print confirmation screen is displayed. 4 S tart printing. (1) Confirm the settings. T o change any of the settings, press [Settings]. See “Changing the Print Settings” on page 35 . (2) Press [Color].
Chapter 3 55 Printing from a Memory Card 2 S pecify the date range. z If you selected <One date only>: (1) Use [ ] or [ ] to specify the date to search for . (2) Go to main step 3. z If you selected <Select date range>: (1) Use [ ] or [ ] to specify the date of the oldest photos you want to print, then press [OK].
56 Chapter 3 Printing fro m a Memory Card (2) Use [ ] to enlarge o r [ ] to reduce the cropping frame size, respe ctively . (3) Use [ ] or [ ] to switch the croppin g frame between portrait and landscape. 4 Finalize your selecti on of trimming area. (1) Press [OK].
Chapter 3 57 Printing from a Memory Card 3 S pecify the layout. (1) Use [ ] or [ ] to select the layout, then press [OK]. The following layouts can be selected.
58 Chapter 3 Printing fro m a Memory Card Printing on the Sticker (Sticker Print) Y ou can print your favorite ph oto with a frame on Canon Photo S tickers. 1 Prepare for printing. See “Prepare for printing.” on page 51 . 2 Select the print me nu.
Chapter 3 59 Printing from a Memory Card Other Printing Functions The following print functions are also provided under the Special photo print menu. z <Print all photos> Y ou can print all p hotos saved on the memory card. z <Photo index print> Y ou can print a list of all the photos save d on a memory card.
60 Chapter 3 Printing fro m a Memory Card z <Captured info> Information on photographs at the time of its shooting (Exif info) can be printed in the margin of Photo index print or selected individual photos. 1 Prepare for printing. See “Prepare for printing.
Chapter 3 61 Printing from a Memory Card Printing by Usin g the Photo Index Sheet With this machine, you can easily select print options as well as the photos to print using the Photo Index Sheet and by marking its appropriate circles.
62 Chapter 3 Printing fro m a Memory Card z If you selected <Search>: (2) Use [ ] or [ ] to specify the oldest shot date to include in print, then press [OK]. (3) Use [ ] or [ ] to specify the newest shot date to include in print, then p ress [OK].
Chapter 3 63 Printing from a Memory Card (F) Select the paper source. (G) Mark this to print the same Photo Index Sheet again. *If you mark this, all other mar ked settings will be disregarded. 5 Fill in the appropriate circles in the Photo Index Sheet.
64 Chapter 3 Printing fro m a Memory Card Important z If <Failed to scan Photo Index Sheet.> is displayed on the LCD, press [OK]. Make sure that you have marked all the necessary circles on the sheet, and confirm its orientation and position when it is set on the Platen Glass f or scanning.
Chapter 4 Chapter 4 65 Photo Printing fro m Phot o or Film Photo Printing from Photo or Film Y ou can scan and print printed photos and 35 mm film into the machine. For film, both film strip s (six connected frames per strip after regular developing) and slides (one frame per mounted slide) are supported.
66 Chapter 4 Photo Printing from Phot o or Film 4 Slowly close the Document Cover and press [OK]. The photograph is scanned. Note z Place the photograph(s) at least 0.
Chapter 4 67 Photo Printing fro m Phot o or Film Scanning a Film This section describes how to scan 35 mm film strips and slides. Also mount film in the film guide in the same way as that of scanning with the machine when scanning films from your computer .
68 Chapter 4 Photo Printing from Phot o or Film 4 Remove the film guide. (1) Remove the F AU Protective Sheet from t he Document Cover . (2) Remove both the film guides for film strip or slides from the rear of the F AU Protective Sheet. 5 Mount film in the appropriate film guide as describ ed below .
Chapter 4 69 Photo Printing fro m Phot o or Film (2) Mount the film in the film guide with the front side (th e side showing the correct image) face down. Pass the tip of the film under the tabs of the film guide, then position the film in the film guide so that the spaces between frames are aligned with the white line mark of the film guide.
70 Chapter 4 Photo Printing from Phot o or Film z Mounting 35 mm Slides: (1) Align the film guide with the indentations on the right and left sides of the Platen Glass. (2) Mount the slides in the film guide with the front side (the side showing the correct image) face down and with the image upside down.
Chapter 4 71 Photo Printing fro m Phot o or Film 6 Slowly close the Document Cover and press [OK]. The film is scanned. Printing Photographs Let’s select a scanned photo and specify the number of prints, and print it. Printing Photo Displayed on the LCD ( Single-photo print) Print a scanned photo.
72 Chapter 4 Photo Printing from Phot o or Film 2 Select the print me nu. (1) Use [ ] or [ ] to select <Single-photo pr int>, then press [OK]. The photo selection screen is displayed. 3 Select the photo you want to print. (1) Use [ ] or [ ] to display the photo you want to pr int.
Chapter 4 73 Photo Printing fro m Phot o or Film (3) Press [Color] to print in color , or [Black] to print in black & white. The machine starts printing. Specifying Ho w Many Copies to Print for Each Photo (Multi-photo print) Y ou can sp ecify the number of print s to be made for each pho to.
74 Chapter 4 Photo Printing from Phot o or Film Printing on the Sticker (Sticker print) Y ou can print your favorite ph oto on Canon Photo S tickers to create your own st ickers. 1 Prepare for printing. See “Prepare for printing.” on page 71 .
Chapter 5 Chapter 5 75 Printing Photogra phs Directly from a Compliant Device Printing Photographs Directly from a Compliant Device Connecting a PictBridge compliant device such as a digital camera, camcorder or mobile phone to the machine allows you to print recorded images directly without using a computer .
76 Chapter 5 Printing Photographs Direct ly from a Compliant Device Connecting to a PictBridge Compliant Device T o connect a PictBridge compliant device to this machine, use the USB cable supplied with the device. 1 Set up the machine. Refer to the Setup Guide to set up the machine and make it ready for printing.
Chapter 5 77 Printing Photogra phs Directly from a Compliant Device (2) Connect the device to the machine using the USB cable (for connection to a computer) supplied with the device.
78 Chapter 5 Printing Photographs Direct ly from a Compliant Device Printing Photographs Directly from a PictBridge Compliant Device When operating the device, be sure to follow the instructions given in the instruction manual supplied with the PictBridge compliant device.
Chapter 5 79 Printing Photogra phs Directly from a Compliant Device About “Paper size” and “Paper type” When the “Default” (selections based on the machi ne setting) is selected, the machine operates based on the <Page size> and the <Media type> settings specified in the Memory card mode of the machine.
80 Chapter 5 Printing Photographs Direct ly from a Compliant Device About “Layout” and “Trimming” For “Layout”, when the “De fault” (selections based on the machine setting) is selected, the machine operates based on the print setting specified in the Memory card mode of the machine.
Chapter 5 81 Printing Photogra phs Directly from a Compliant Device Other Setting s If you use a Canon PictBridge-compliant device, you can use the follow ing print settings. (Note that these print settings cannot be used fo r some models.) For details, refer to your device’s instruction manual.
82 Chapter 5 Printing Photographs Direct ly from a Compliant Device Printing Photographs Directly from a Canon Bubble Jet Direct Comp atible Digit al Camera The following is a list of media types that.
Chapter 5 83 Printing Photogra phs Directly from a Compliant Device Printing Directly from a Digital Camera or a Digit al Video Camcorder This section describes how to print after connecting a ca mera to the machine. 1 Display the image you want to print in replay mode.
Chapter 6 84 Chapter 6 Printing Photographs fr om a Wireless Communication Device Printing Photographs from a Wireless Communication Device If you have a mobile phone with an infrared por t for wireless data transmission, you can print photos through a cordless connection with the machine.
Chapter 6 85 Printing Photographs from a Wire less Communication Device Setting Items (1) Select the page size for the wireless print. (2) Select the media type for the wireless print. (3) Correct the contours and smoothes out the jaggedness. Image optimizer ON, Image optimizer OFF (4) Select the layout of the photos as below .
86 Chapter 6 Printing Photographs fr om a Wireless Communication Device Performing Infrared Communication Y ou can print photos in your mobile phone. When printing through infrared communication, also refer to your mobile phone manual. 1 Prepare for printing.
Chapter 6 87 Printing Photographs from a Wire less Communication Device (2) Select the photo to print and send the data to the machine using the infrared communication function of the mobile phone.
88 Chapter 6 Printing Photographs fr om a Wireless Communication Device 2 Connect the Bluetooth Unit BU-20 to the Dire ct Print Port. 3 Set the print setting. See “Setting the Page Size, Media T ype, and Layout When Printing from a Mobile Phone” on page 84 .
Chapter 6 89 Printing Photographs from a Wire less Communication Device Changing the Bluetooth Settings - Bluetooth settings Y ou can change the device n ame of the machine, p asskey , and so on in Bluetooth settings. 1 Press [ON/OFF] to turn on the machine.
Chapter 7 90 Chapter 7 Printing from Your Computer Printing from Y our Computer This section describes the basic printing proc edure, taking the steps to print documents as an example. Printing with Windows 1 Press [ON/OFF] to turn on the machine. See “T urning on the Machine” o n p age 18 .
Chapter 7 91 Printing from Your Computer 5 Open the printer properties dialog box. (1) Select [Print] from the application software’s [File] menu. The [Print] dialog box opens. (2) Ensure that your machine is selected. (3) Click [Preferences] or [Properties].
92 Chapter 7 Printing from Your Computer (4) Click [OK]. The [Print] dialog box opens. Note z T o confirm the page size, click on the [Page Setup] tab. If it does not match the document size set by the application software, select the matching page size.
Chapter 7 93 Printing from Your Computer 7 Print the document. (1) Click [Print] or [OK]. The machine starts printing. Printing with Macintosh 1 Press [ON/OFF] to turn on the machine. See “T urning on the Machine” o n p age 18 . 2 Load the paper on the machine.
94 Chapter 7 Printing from Your Computer 3 Ensure that the prop er paper source is selected. When the Auto Sheet Feeder Lamp (A) is lit, paper is fed from the Au to Sheet Feeder . When the Cassette Lamp (B) is lit, paper is fed from the Cassette. 4 Create a document or open a fil e to print from the appli cation software.
Chapter 7 95 Printing from Your Computer (5) Select the print mode appropriate to your document from [Print Mode]. 7 Print the document. (1) Click [Print]. The machine starts printing. Note z This section describes the procedure for selecting [Paper Feed Switch] from [Paper Source].
Chapter 8 96 Chapter 8 Scanning Images Scanning Images This section describes how to scan images. About Scanning Images Y ou can scan images from the machine to a computer without printing them and save them in popular file formats, such as JPEG , T iff, Bitmap.
Chapter 8 97 Scanning Images Scanning Methods Scanning Using the MP Navigator MP Navigator enables you to scan in docu ments loaded on the Platen Glass and view images saved on a memory card or a co mputer used over a USB connection or a wireless or wired LAN.
98 Chapter 8 Scanning Images z When using Mac OS X For the machine to start scanning when [Color] or [Black] is pressed, you need to set MP Navigator as the starting application software in Image Capture under [Applications] of Mac OS X. If you are using Mac OS X v .
Chapter 8 99 Scanning Images (2) Use [ ] and [ ] to select the computer you want to use, then press [OK]. The scan process selection screen is displayed. 4 Select the scan operatio n. (1) Use [ ] or [ ] to select the scan operation, then press [OK]. Scan standby screen is displayed.
100 Chapte r 8 Scanning Images 5 Press [Color] or [Black]. The document is scanned. The settings configured from MP Navigator a pply when scanning. Scanning from an Application Sof tware Y ou can scan an image from a TW AIN- or WIA-* compliant application software and handle the scanned image in the application software.
Chapter 9 Chapter 9 101 Reading from and Writing to a Memory Card Reading from and W riting to a Memory Card Setting up the Card Slot as the Memory Card Drive of the Computer The machine’s Card Slot can also be used as a memory card d rive of a computer over a wireless or wired LAN as well as over a USB connection.
102 Chapte r 9 Reading from a nd Writing to a Memory Card 1 Display the Read/write attribute screen. (1) Ensure that the memory card is not set. If the memory card is set, remove it from the Card Slot. See “Inserting the Memory Card” on page 49 . (2) Press [Menu].
Chapter 10 Chapter 10 103 Changing the Machine Settings Changing the Machine Settings This section describes the procedure to chan ge the settings in the Device settings screen, taking the steps to specify Extended copy amount as an example. 1 Press [ON/OFF] to turn on the machine.
104 Chapter 10 Changing the Machine Setting s (2) Use [ ] or [ ] to select the menu, then press [OK]. Example: select <Extended copy amount>. 5 Change the se ttings. (1) Use [ ] or [ ] to select the setting item, then press [OK]. Example: select <Small>.
Chapter 10 105 Changing the Machine Settings Wireless Print Settings - Infrared/Bluetooth Communication Y ou can change the settings for wireless print through infrared communication w ith a mobile phone and the machine. Y ou can not use these settings to change the print settings for the machine using a computer over a wireless LAN.
106 Chapter 10 Changing the Machine Setting s LAN settings For details on how to set LAN settings, refer to “Printing Out Network Set ting Information” and “Initializing Network Settings” of “Printing and Initializing Network Settings” in the Setup Guide .
Chapter 10 107 Changing the Machine Settings Slide show setting S pecifies the image display q uality of the slide show . Language selection Changes the language for L CD messages. Reset setting Y ou can change the settings back to the default, except for the language for LCD messages, the position of the Print Head and LAN settings.
Chapter 11 108 Chapter 11 Routine Maintenance Routine Maintenance Replacing an Ink T ank When ink runs out, replace the ink tank. The machine will not print if the wrong type of ink tank is used, or if it is installed in the incorrect position. The machine uses the following ink tanks.
Chapter 11 109 Routine Maintenance Knowing When to Replace Ink T ank It is important to identify the empty tank using the LCD and replace it. When Low Ink is Detected: is displayed. The message is displayed on the LCD when you start printing. Obtain a new ink t ank.
110 Chapter 11 Routine Maintenance 1 Open the Scanning Unit (Printe r Cover) and th e Paper Output T ray . (1) Make sure the machine is turned on. (2) Raise the Scanning Unit (Printer Cover) until it stops. * The Paper Output T ray will open automatically after the Print Head Holder moves to the center .
Chapter 11 111 Routine Maintenance 3 Remove the ink tank whose lamp is flashing fast. (1) Push the tab (A) and remove the ink tank. 4 Prepare a replacement tank. (1) Remove the new ink tank from its p ackaging, then pull the o range t ape (A) toward the arrow so that the protective film does not r emain on the air hole (C).
112 Chapter 11 Routine Maintenance 5 Install the ink tank. (1) Install the ink tank into the Print Head. (2) Press on the mark on the ink tank until the ink tank snap s firmly into place. (3) Ensure that the ink tank clicks into place and then its lamp light s red (B).
Chapter 11 113 Routine Maintenance 6 Close the Inner Cover . 7 Slowly close the Scanning Unit (Printer Cover). Keeping the Best Printing Result s z When unplugging the power cord When unplugging the power cord, be sure to pres s [ON/OFF] first. When you press [ON/OFF], the Print Head is protected by the cap to prevent the ink from drying.
114 Chapter 11 Routine Maintenance When Printing Becomes Faint or Colors are Incorrect When printing becomes faint or colors are incorrect, even if ink remains in the ink tanks, the Print Head nozzles are probably clogg ed. Follow the procedures below to clean the nozzles.
Chapter 11 115 Routine Maintenance Performing Maintenanc e 1 Press [ON/OFF] to turn on the machine. See “T urning the Machine ON and OFF ” on page 18 . 2 Press [Menu]. 3 Display the Mainte nance screen. (1) Use [ ] or [ ] to select <Maintenance/settings>, then press [OK].
116 Chapter 11 Routine Maintenance Printing the Nozzle Check Pattern Print the nozzle check pattern to determine whether the in k eject s properly from the Print Head nozzles and to verify Print Head alignment. Use this f unction when printed results are blurred or the color is incorrect.
Chapter 11 117 Routine Maintenance Examining the Nozzle Check Pattern Examine the nozzle check pattern. Perform cleaning if necessary . (1) Examine if any missing lines exist on this pattern. (2) Examine if any white stripes exist on this pattern.
118 Chapter 11 Routine Maintenance z When a white stripe e xists on any of the printed p atterns (1) Select <Also B> and press [OK]. The cleaning confirmation screen is displayed. (2) Select <Y es> and press [OK] to start Print Head cleaning.
Chapter 11 119 Routine Maintenance (3) Use [ ] or [ ] to select <Y es> and then press [OK]. The machine starts the Print Head cleaning. 3 Check the status of the Print Head. After Print Head cleaning finishes, the nozzle check confirmation screen is displayed.
120 Chapter 11 Routine Maintenance (3) Use [ ] or [ ] to select <Y es> and then press [OK]. The machine starts the Print Head deep cleaning. 3 Check the status of the Print Head. (1) Print the nozzle check pattern to verify that the Print Head nozzles are clean.
Chapter 11 121 Routine Maintenance (2) Use [ ] or [ ] to select <Auto head align> and then press [OK]. The confirmation screen is displayed. (3) Load two sheets of A4- or Letter-sized plain paper in the Auto Sheet Feeder . (4) Use [ ] or [ ] to select <Y es> and then press [OK].
122 Chapter 11 Routine Maintenance Cleaning the Platen Glass and Docu ment Cover Wipe the Platen Glass (A), the F AU Protective Sheet (white area) (B), and the F AU Lamp (C) with a clean, soft, lint-free cloth moistened with water.
Chapter 11 123 Routine Maintenance (3) Use [ ] or [ ] to select <Y es>, then press [OK]. The paper feed rollers are cleaned. 4 Repeat step 3 twice. 5 Load three or more of A4- or Letter-sized paper in the paper source you selected in step 2. 6 Repeat step 3 three ti mes.
124 Chapter 11 Routine Maintenance 3 Perform bottom plate cleaning. (1) Display the Maintenance screen. See “Performing Maintenance” on p age 1 15 . (2) Use [ ] or [ ] to select <Bottom plate cleaning>, then press [OK]. The confirmation screen is displayed.
Chapter 12 Chapter 12 125 Troubleshooting T roubleshooting This section describes troubleshoo ting tip s for p roblems you may encounter when using the machine.
126 Chapter 12 Troubleshooting z “T rouble scanning with MP Navigator” on page 153 z “Image position and size incorrect when scanni ng from the machine’ s operation panel” on page 154 z “T rouble scanning over a wireless or wired LAN/“Cannot communicate with scanner .
Chapter 12 127 Troubleshooting z “Error No.: 2500 is Displayed” on page 162 z “For Windows Users” on page 162 If an error occurs when the machine is connected to a computer When an error occurs in pr inting such as the printer is out of paper or paper jams, a troubleshooting message is displayed automatically .
128 Chapter 12 Troubleshooting Inner cover is open. Close the inner cover and press [OK]. If the Inner Cover is open when starting normal printing, close it before pressing [OK] on the machine. Do not open or close the Inner Cover w hen printing. This may damage the machine.
Chapter 12 129 Troubleshooting Auto head align has failed. z A4/Letter-sized paper is not loaded on the Auto Sheet Feeder . Press [OK] on the machine to clear the error , then load one sheet of A4/ Letter-sized paper in the Auto Sheet Feeder . Automatic Print Head alignment cannot be performed using paper from the Cassette.
130 Chapter 12 Troubleshooting Cannot See the Display Properly on the LCD/Cannot See the Display on the LCD Note Adjusting the Print Head Manua lly If the Automatic Print Head Alignment does not wo rk or if you wish to adjust the print heads manually , follow the procedure below .
Chapter 12 131 Troubleshooting Cannot Scan Films Cannot obt ain a clean scan, colors sc an incorrectly Frames are not detected correctly Cause Action Film guide not correctly placed on the Platen Glass. Insert the film in the film guide supplied for this machine and place it in the correct position on the Platen Glass.
132 Chapter 12 Troubleshooting Ink Does Not Come Out/Printing is Blurred/Colors are Wrong/White S treaks/St raig ht Lines are Misaligned/ Cannot Print to End of Job Cause Action Ink tank is empty . If the ink tank lamp is flashing, ink is empty . Replace the ink tank, and close the Scanning Unit (Printer Cover).
Chapter 12 133 Troubleshooting Print Head nozzles clogged or shifted Open the Scanning Unit (Printer Cover) and check if all ink tanks lamps light red. Print the nozzle check pattern to check for uneven ink output. See “Printing the Nozzle Check Pattern” on page 1 16 .
134 Chapter 12 Troubleshooting Unnecessary print jobs are queued./ Computer problems Restart your computer . It may solve the problem. Delete an undesired print job, if there is any . Use Canon IJ Status Monitor in Windows or Printer Setup Utility (or Print Center) in Macintosh for the deletion.
Chapter 12 135 Troubleshooting When Copying The size of the print data is too large. Check the size of the print data. For Windows XP and W indows 2000, if the size of the data is too large, p art of it may be lost. When the spool format is EMF , follow the procedure below .
136 Chapter 12 Troubleshooting Back of Paper is Smudged/Paper Does Not Feed Properly/Printed Surface is Scratched Cause Action Inside of the machine is dirty . If the inside of the machine is dirty , printed paper may be smudged. Follow the steps described below to clean the inside of the machine.
Chapter 12 137 Troubleshooting Paper Feed Roller is dirty . Follow the steps described below to clean the Paper Feed Rollers. Cleaning the Paper Feed Rollers consumes them, so perform this procedure only when necessary . 1. Press [ON/OFF] to turn on the machine, then remove any p aper from the Auto Sheet Feeder and Cassette.
138 Chapter 12 Troubleshooting Thick paper is used. If you set the machine to prevent paper abrasion, the clearance between the Print Head and the loaded paper is widened. If the printing surface is abraded even with the media type set correctly to match the loaded paper , set the machine to prevent paper abrasion.
Chapter 12 139 Troubleshooting Inner Cover is not closed completely . Close the Inner Cover completely . Paper does not feed properly if the Inner Cover is even slightly open. The media type is not selected correctly in the printer driver. On the [Main] tab of the printer driver , ensure that the [Media T ype] selected matches the paper loaded.
140 Chapter 12 Troubleshooting Paper Curls/Ink Blot s Paper Jams Cause Action Paper being used is too thin. Use Photo Paper Pro or other Canon speci alty p aper to print images that have a high color saturation. See “Media types you cannot use” on pag e 22 .
Chapter 12 141 Troubleshooting Paper jams inside the machine (T ransport Unit). Remove the paper according to the following procedure. 1. Open the Rear Cover. 2. When you can see the jammed paper , slowly pull the paper out. Be careful not to touch the components inside the machine.
142 Chapter 12 Troubleshooting Paper jams inside the machine (Duplex T ransport Section). Remove the paper according to the following procedure. 1. Remove the Cassette. If the paper is loaded in the Auto Sheet Feeder , remove the paper from the Auto Sheet Feeder .
Chapter 12 143 Troubleshooting Cannot Print Properly from a Photo Index Sheet Cannot Print Properly from the Digit al Camera The following are the possible e rrors that may occur when printin g directly from a digital still camera or digital video camcorder*, and the countermeasures to eliminate them.
144 Chapter 12 Troubleshooting Error Message On Camera Action Printer in use/Printer warming up Photos are printed from the compute r . Wait until printing ends.
Chapter 12 145 Troubleshooting *1 T o resume printing, you can press [OK] on the machine instead of selecting Continue. No Ink Y ou can check the machine status according to the way the ink tank lamp s (red) flash. Check the status of each lamp and take the appropriate action to clear the error .
146 Chapter 12 Troubleshooting Cannot Print Properly through Wireless Communication The following are the causes of trouble may occur when printing thr ough infrared communication between a mobile phone and the machine. They d o not apply to troubles when printing from a computer over a wireless LAN.
Chapter 12 147 Troubleshooting Cannot Inst all the MP Drivers Cause Action Unable to proceed beyond the Printer Connection screen Reinstall the MP Drivers. 1. Click [Cancel] on the [Printer Connection] screen. 2. Click [Start Over] on the [Inst allation Failure] screen.
148 Chapter 12 Troubleshooting Cannot Connect to the Computer Properly Printing Speed is Slow / USB 2.0 Hi-S peed Connection Does Not Work The computer has an old version of the software inst alled. (Canon MultiP ASS is registered as a program in the [Start] menu.
Chapter 12 149 Troubleshooting When Y ou Connect to a Computer Running Windows XP , the Screen Shows the W arning Message “This device can perform faster” or “High- SPEED USB Device Plugged .
150 Chapter 12 Troubleshooting Scanner is not selected in the application software. In the application software, select this machine in [Select Source] or [Import] under the [File] menu. Example: ArcSoft PhotoStudio *Display may differ depending on your operating system.
Chapter 12 151 Troubleshooting Cannot display preview Computer stop s operat ing during scanning Scan quality is poor (Poor image displayed on the monitor) Cause Action An error message “Release the lock switch” appears and the machine fails to preview.
152 Chapter 12 Troubleshooting Part s of image missing or surrounded by extra white areas T rouble scanning with Multi-Scan or Multi-Crop function Slow scanning speed “There is not enough memo ry .” message is displayed Cause Action Scan area was specified larger than the original.
Chapter 12 153 Troubleshooting Scanned image not disp layed properly T rouble scanning with MP Navigator Cause Action Scanned image prints out enlarged (reduced). Set the printing size in the application software. Example: ArcSoft PhotoStudio 1.
154 Chapter 12 Troubleshooting Image position and size incorre ct when scan ning from the machine’ s operation p anel T rouble scanning over a wireless or wired LAN/“Cannot communicate with scanner .” appears on the screen when using over a wireles s or wired LAN Cause Action MP Navigator settings do not match the originals.
Chapter 12 155 Troubleshooting T rouble scanning from the machine’ s Operation Panel over a wirele ss or wired LAN The access control is set to the machine. Print out the network setting information and verify if the access control with IP address or MAC address is enabled on the machine.
156 Chapter 12 Troubleshooting Cannot Scan Films Thumbnail Display does not display corr ectly after previewin g Cannot obt ain a clean scan, colors sc an incorrectly Canon IJ Network Scan Utility is disabled. Confirm that the Canon IJ Network Scan Utility is enabled.
Chapter 12 157 Troubleshooting Image becomes too dark or too bright when cropping frame is moved, exp anded or contracted T rouble scanning with MP Navigator Frames are not detected correctly Cause Action Changing the size or position of the cropping frame selects inappropriate color data.
158 Chapter 12 Troubleshooting An Error Message Appears on the Screen Service Error 5 100 is Displayed Writing Error/Output Error/Communic ation Error in USBnnn or MPUSBPRNnn (“n” represent s a number) Cause Action Movement of the Print Head Holder is blocked.
Chapter 12 159 Troubleshooting Writing Error/Output Error in CNBJNPnnnnnn MP Drivers is not installed properly . Uninstall then reinst all the MP Drivers. 1. Click [St art], and select [All Programs] (or [Programs]), the name of your machine, and [Uninstall].
160 Chapter 12 Troubleshooting When an Error is Displayed Regarding Automatic Duplex Printing Error No.: 300 is Displayed The MAC address filtering or the IP address filtering is configured on the access point.
Chapter 12 161 Troubleshooting Error No.: 306 is Displayed Error No.: 1700 is Displayed Error No.: 1851 is Displayed The name of the machine being used is not selected in the [Printer] pull- down menu of the [Print] dialog box. Select [MP800R] from the [Printer] pop-up menu in the [Print] dialog box of the printer driver .
162 Chapter 12 Troubleshooting Error No.: 1856 is Displayed Error No.: 2001 is Displayed Error No.: 2500 is Displayed For Wind ows Users Cause Action During regular printing, Inner Cover is opened. Close Inner Cover , press [OK] on the mac hine, then try printing again.
Chapter 12 163 Troubleshooting If Y ou Cannot Resolve the Problem If you cannot resolve the problem with any of the workarounds in this chap ter , please contact the Canon Customer Care Center. Canon support staff are trained to be able to provide technical support to satisfy customers.
Chapter 13 164 Chapter 13 Appendix Appendix Printing Area T o ensure the best print quality , the machine allows a margin along each edge of media. The actual printable area will be the area without these margins. By selecting Borderless Printing*, printing with no margins is possible.
Chapter 13 165 Appendix Letter , Legal Envelopes Size Printable Area (wid th x height) Letter 203.2 x 271.4 mm / 8.0 x 10.7 inches Legal 203.2 x 347.
166 Chapter 13 Appendix How to Read the On-screen Manuals The on-screen manuals are manuals to be viewed on your computer . Read these manuals for detailed information on usage of the machine that is not mentioned in this document, troubleshooting, or usage of the application softwares supplied with the Setup CD-ROM, etc.
Chapter 13 167 Appendix Uninst alling the Canon IJ Network Scan Utility Follow the steps described below to uninstall the Canon IJ Network Scan Utility from your computer . 1 Click [S tart], and select [All Programs] (or [Programs]), [Canon IJ Network Utilities], [Canon IJ Network Scan Utility], and then [Uninstaller].
168 Chapter 13 Appendix Uninst alling the On-screen Manuals Follow the steps described below to uninstall all of the installed on-screen manuals from your computer . If the on-screen manuals have been installed, al l of them will be deleted collectively .
Chapter 13 169 Appendix S pecifications General Specifications Printing resolution 9600 * x 2400 dpi. max. * Ink droplets can be placed with a pitch of 1/9600 inch at minimum. Print speed * *Based on Canon standard pattern. Print speed may vary depending on system configuration, software, document complexity , print mode and page coverage.
170 Chapter 13 Appendix Copy Specifications Copy speed *Based on Canon standard pattern. Copy speed may vary depending on document complexity , copy mode, page coverage and the number of copies. Black & white: <Fast> mode approx. 30 cpm Color: <Fast> mode approx.
Chapter 13 171 Appendix Wired LAN Specifications Supported Networks 100BASE-TX /10BASE-T Interface Wired LAN Interface (100BASE-TX/10BASE-T) Compliant Standard IEEE802.
172 Chapter 13 Appendix Layout Default (Selections based on the machine setting), Borderless, Bordered, N-up (2, 4, 9, 16 *1 ), 35-up *2 *1 Layout compatible with Canon-brand sticker above. See “Recommended Paper and Requirements” on p age 20 . *2 Selected photos are printed in 35 mm film style layout (contact printing layout).
Chapter 13 173 Appendix *1 For updated compatibility , visit our website. *2 Operation can only be guaranteed on a PC with built-in USB or USB 2.0 Hi-Speed port and pre-installed Windows XP , 2000, Me or 9 8. *3 Including compati ble processors. *4 ScanSoft OmniPage SE (OCR software) does not support Windows 98 first edition.
174 Chapter 13 Appendix Users in the U.S.A. Regulatory Information Color Printer Model: K10266 (Cont ains FCC ID: AZDK30254/IC: 498C- K30254) This device complies with Part 15 of the FCC Rules and RSS-210 of the IC R ules.
Chapter 13 175 Appendix Canadian Radio Interfe rence Regulations This digital apparatus does not exceed Class B limits for radio noise emissions from a digital apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry Canada.
176 Chapter 13 Appendix CANON U.S.A., INC. LIMITED W ARRANTY --- (USA Only) The limited warranty set forth below is given by Canon U.S.A., Inc. (“Canon USA”) with respect to the new or refurbished Canon-brand product (“Product”) packaged with this limited warranty , when purchased and used in the United S tates only .
Chapter 13 177 Appendix ITS ASF . (SOME ST A TES DO NOT ALLOW LIMIT A TIONS ON HOW LONG AN IMPLIED W ARRANTY LASTS, SO THE ABOVE LIMIT A TION MA Y NOT APPL Y TO YOU.
178 Chapter 13 Appendix day InstantExchange Service for Alaska and Hawaii). Canon USA does not guarantee expedited shipping service in the event of the occurrence of factors beyond its reasonable control.
179 Index Index Numerics button 17 A Access Lamp 15 Alarm Lamp 17 Appendix 164 Auto She et Feeder 13 Auto Sheet Feeder Lamp 17 B Back butt on 17 Before P rinting 13 Black butto n 17 C Card Slot 15 Car.
180 Index P Paper Guide 13 Paper Ou tput Tray 14 Paper Support 13 Performing B luetooth Communica tion 87 Performing Infrared Communic ation 8 6 PGI-5BK Bl ack 108 Photo Index Sh eet button 17 Photo P.
Chapter 14 181.
182 Chapter 14.
Chapter 14 183.
Copyright © 1990 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms are permitted provided that the above copyright notice and this pa.
Getting Help from Canon Help Us Help Y ou Better Before you cont act Canon, please record the following in formation. Serial Number (located on the inside of the product): ________________ ____ Model .
QT5-0266-V03 XXXXXXXX ©CANON INC. 2006 PRINTED IN THAILAND User ’ s Guide User ’ s Guide QT5-0266-V03 ENG The following ink tanks are compatible with this machine. For details on ink tank replacement, refer to “Replacing Ink T anks” in this guide.
デバイスCanon MP800Rの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Canon MP800Rをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCanon MP800Rの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Canon MP800Rの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Canon MP800Rで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Canon MP800Rを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCanon MP800Rの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Canon MP800Rに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCanon MP800Rデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。