CanonメーカーMV5の使用説明書/サービス説明書
ページ先へ移動 of 181
PRINTED IN JAP AN MPRIME A U JAPON © CANON INC. 2002 D Y8-9020-106-000 PUB.DIE-171 0201A/Ni9.5 CANON INC. Canon Europa N.V . P .O . Box 2262, 1180 EG Amstelv een, the Netherlands Canon UK Ltd. Ribcon W ay Luton Bedfordshire LU4 9UR T elephone 0870-241-2161 Canon Australia Pty .
2 E Introduction Impor tant Usage Instructions CA UTION: CUST OMERS IN THE U .K. SHOULD READ THIS BEFORE USING THIS PRODUCT . CHANGING THE FUSE THE MAINS LEAD ON THIS PRODUCT IS FITTED WITH A NON-REWIREABLE (MOULDED) PLUG, INCORPORA TING A 3 AMP FUSE.
3 E Introduction Operating Steps and Reference Guide MV5i MC Digital Video Camcorder MV5i MC Instruction Manual Mastering the Basics Using the Full Range of F eatures Editing Using the Memor y Card Di.
4 E Introduction Important Usage Instructions ....................2 Operating Steps and Reference Guide ......3 Thank you for Choosing a Canon ..............7 Introducing the MV5/MV5i/MV5i MC ....8 Finding Y our W ay Around the MV5/MV5i/MV5i MC ......
5 E Introduction : Reference page numbers : Functions that can be operated from the body of the camcorder : Functions that can be operated from the wireless controller : Supplementary notes for camcor.
6 E Introduction Switch P ositions by Operating Modes Operating Mode PO WER switch T APE/CARD switch CAMERA CAMERA T APE PLA Y (VCR) PLA Y (VCR) T APE CARD CAMERA CAMERA CARD CARD PLA Y (VCR) PLA Y (VCR) CARD MV5i MC MV5i MC MV5i MC * A vailable functions v ary depending on the operating mode.
7 E Introduction Thank y ou for Choosing a Canon Y our camcorder is supplied with the following accessories: WL-D74 WL-D77 Wireless Controller T wo AA batteries Lens cap and lens cap cord STV -250N St.
8 E Introduction Intr oducing the MV5/MV5i/MV5i MC Y ou can record still images like photographs only by pressing the photo button. Still Images 10 × Optical Zoom (200 × Digital Zoom) Memory Card MV5i MC Y ou can record still images and movies onto a SD Memory Card or MultiMediaCard.
9 E Mastering the Basics Finding Y our W a y Around the MV5/MV5i/MV5i MC Speaker (p. 31) LCD screen (p. 25) BATT. (battery) RELEASE button (p. 15) Memory card compartment cover (p. 107) Battery attachment unit (p. 15) LCD panel OPEN button (p. 25) D.EFFECTS SELECT button (p.
10 E Mastering the Basics AE SHIFT button (p. 73)/ SLIDE SHOW button (p. 124) FOCUS button (p. 76)/ DATA CODE button (p. 80) P Easy Recording Program AE SET button (p. 40) CAMERA • OFF • PLAY(VCR) • } TAPE/CARD switch (p. 18) Zoom controller (p.
11 E Mastering the Basics SET REW PLA Y FF ST ART /STOP PHOTO SELF TIMER MENU TV SCREEN DATA CODE – CARD + AUDIO MONITOR REC P AUSE SEARCH SELECT SLIDESHOW ZERO SET MEMORY AUDIO DUB. STOP MIX BALANCE ST -1 ST -2 ON/OFF D.EFFECTS SET ZOOM WT AV INSERT P AUSE SLOW REMOTE SET +/ – / × 2 WIRELESS CONTROLLER WL - D77 × 2 button (p.
12 E Mastering the Basics P owering Y our Camcor der Before operating your camcorder , you will need to use the power adapter to: Pro vide power from a household po wer socket or Charge a battery pack Notes: • The power adapter con verts current from a household po wer socket (100–240 V A C, 50/60 Hz) to the DC current used by your camcorder .
13 E Mastering the Basics Specifications Po wer supply 100–240 V A C, 50/60 Hz 0.32A Rated output 7.4 V DC, 2.0 A Operating temperature range 0°C - 40°C (32°F- 104°F) Dimensions 112 × 29 × 45mm (4 3 / 8 × 1 1 / 8 × 1 3 / 4 in) W eight 186g (6 1 / 2 oz) (without power cable) W eight and dimensions are approximate.
14 E Mastering the Basics Charging the battery pac k Y our battery pack has been partially charged before it left the f actory . It should hav e enough power for you to check that your camcorder is w orking properly .
15 E Mastering the Basics Specifications Po wer supply 100 – 240 V A C, 50/60Hz, 0.17A (100V) – 0.10A (240V) Rated output 8.4V DC, 0.5A Operating temperature range 0°C - 40°C (32°F- 104°F) Dimensions 91 × 29.5 × 56 mm (3 5 / 8 × 1 1 / 8 × 2 1 / 4 in) W eight 82 g (2 7 / 8 oz) (without power cable) W eight and dimensions are approximate.
16 E Mastering the Basics Loading a Cassette 1. Make sur e that you ha ve attached a power source. 2. Slide the OPEN / EJECT 5 switch to release the cassette compartment cover . • Pull the cover fully open (while holding the b utton) and wait a couple of seconds for the cassette compartment to open automatically .
17 E Mastering the Basics Protecting tapes fr om accidental erasure T o protect your recording from accidental erasure, slide the tab on the cassette so that it exposes the hole. (This switch position is usually labelled SA VE or ERASE OFF .) If you load a protected cassette, “THE T APE IS SET FOR ERASURE PREVENTION” is displayed for approx.
18 E Mastering the Basics Recor ding Movies onto a T ape Hav e you completed the following steps? • Attaching a power source ( 12). • Removing the lens cap ( 150). • Fastening the grip belt ( 150). • Choosing the display: viewf inder ( 150) or LCD screen ( 25).
19 E Mastering the Basics 2. Load a cassette ( 16 ). 3. Slide the program selector to [ . • This selects the camcorder’ s Easy Recording program. It allows you to simply point and shoot without making any manual adjustments ( 57). 4. Press and r elease the start/stop button once to begin r ecording.
20 E Mastering the Basics Changing the Recording Mode Y ou can choose between SP (standard play) and LP (long play). LP extends the tape usage by 1.5 times.
21 E Mastering the Basics 16:9 (Wide screen TV recording) Produces images in the 16:9 format for playback on wide screen TVs. T o switch 16:9 to ON, open the menu and select CAM.SET UP . Then select 16:9, set it to ON and close the menu. Notes: • “16:9” is shown in the display when you switch the 16:9 mode on.
22 E Mastering the Basics The camcorder’ s short operation confirmation beeps are indicated by ` in the illustrations. Beeps sound upon certain camcorder operations such as when you turn the camcorder on, during the self-timer countdown, right before the camcorder’ s automatic shut-off, and also upon any unusual condition of the camcorder .
23 E Mastering the Basics 40 × /200 × digital zoom ( card 30 × ) MV5i MC Magnifies the camcorder’ s zoom range by up to 20 × in T APE CAMERA mode.
24 E Mastering the Basics Notes: • When zooming, as a rule, keep at least 1 m (3 ft 3 3 / 8 in) between you and your subject. Howe ver when the zoom is at the wide-angle position, you can focus on a subject as close as 1 cm ( 3 / 8 in). • Image resolution is slightly lower when the magnif ication is greater than 10 × .
25 E Mastering the Basics Using the LCD Screen Slide the LCD panel OPEN button and open the panel by pulling it away from the camcorder . This automatically switches the LCD screen on and the viewf inder of f. Close the LCD panel until it clicks securely closed.
26 E Mastering the Basics Adjusting the LCD screen Y ou can adjust the brightness of the LCD screen. BRIGHTNESS•• DISP.SET UP –+ ( 39) Open the menu and select DISP .SET UP from the menu. Then select BRIGHTNESS, adjust the lev el with the selector dial and close the menu.
27 E Mastering the Basics REC REC PAUSE EJECT The indicators that appear in the LCD display when LCD MIRR OR is turned on: Allowing the subject to monitor recor ding When you turn the LCD panel so that it faces the same direction as the lens, you can watch yourself during recording or let your subject monitor recording.
28 E Mastering the Basics Pla ying Back a T ape Y ou can use the LCD screen for instant, on-the-spot playback. The camcorder also plays back the sound track via the built-in speak er ( 31). • When you play back a tape, you can also close the LCD panel with its screen side facing up.
29 E Mastering the Basics Playback pause Press the a a (pause) button. T o resume normal playback, press it again, or press the e (play) button. The camcorder automatically goes into stop mode after about 5 minutes’ playback pause. Fa st forward playback T o play back the recording at about 11.
30 E Mastering the Basics Reverse Playback T o play back in re verse at normal speed, press the –/ 4a b utton during normal forward playback. Press the PLA Y e button to return to normal forward playback. Forward × 2 Playback Press the × 2 button during normal playback.
31 E Mastering the Basics Adjust the speaker v olume by turning the selector dial. • T urn the selector dial up to increase the volume, and do wn to lo wer the volume. • A bar appears in the display to indicate the current volume. It disappears in 4 seconds.
32 E Mastering the Basics Connections f or Playbac k on a TV Screen Y ou can connect the camcorder to a TV or VCR in order to play back your recordings. Y ou will need to attach a power source to the camcorder ( 12). Power of f all devices before starting the connections.
33 E Mastering the Basics If y our TV (or VCR) has a SCART terminal (without S (S1)-video) AUDIO (L/ MONO) AUDIO (R) VIDEO • Connect the PC-A10 SCAR T adapter to the TV or VCR’ s SCAR T terminal. • Connect the camcorder to the adapter . Connect the camcorder using the STV -250N Stereo V ideo Cable.
34 E Mastering the Basics • Use the S-150 S-video Cable to connect the S-video terminals. Use the STV -250N Stereo V ideo Cable to connect the A UDIO terminals. Connect the white plug to the white A UDIO terminal L (left). Connect the red plug to the red A UDIO terminal R (right).
35 E Mastering the Basics If y our TV (or VCR) has audio/video input terminals • Connect the camcorder using the STV -250N Stereo V ideo Cable. Connect the white plug to the white audio terminal L (left). Connect the red plug to the red audio terminal R (right).
36 E Mastering the Basics Tips f or Making Better Videos Composition The most important element in the scene does not hav e to be in the centre. For a more interesting picture, try to position your subject so it is slightly to one side. Leav e some space on the side of the frame that the subject is facing or moving to wards.
37 E Mastering the Basics Picture angle Camcorder mo ves Close-up Instead of zooming while recording, try to choose your picture angle before you begin. A good way to tell a story with video is to begin with a long shot that establishes the situation, and then mov e in with medium shots and close-ups to show the details.
38 E Using the Full Range of Features Sear ching and Revie wing While Recor ding When the camcorder is in record pause mode, you can use record revie w to play back the last fe w seconds of your recording and then return automatically to record pause mode.
39 E Using the Full Range of Features Using the Menus Many of the camcorder’ s advanced functions are selected from menus which appear in the display . There are 2 main menus: CAM. MENU Camera Menu ( 41) PLA Y MENU ( 42) ( : VCR MENU) The MV5i MC has 2 additional menus: C.
40 E Using the Full Range of Features TV SCREEN SET MENU 2, 11 3-10 1. T urn the PO WER switch ( : and the T APE/CARD switch) to the desired settings. 2. Press the MENU b utton to open the menu. 3. T urn the selector dial and mov e the arrow to the desir ed submenu.
41 E Using the Full Range of Features CAM.SET UP SEL.SETSET MENUCLOSE SHUTTER•••••AUTO D.ZOOM••••••40 × IMAGE S . ••ON 16:9••••••••OFF WHITE BAL.••AUTO SELF-TIMER RETURN e t u o r y i CARD MIX 101-0143 1/50 MIX TYPE••••CARD CHROMA MIX LEVEL••• IMAGE SELECT SEL.
42 E Using the Full Range of Features DISP.SET UP SEL.SETSET MENUCLOSE BRIGHTNESS•• LCD MIRROR••ON TV SCREEN•••ON D/T DISPLAY•OFF CARD ACCESS•ON DEMO MODE•••ON RETURN – + !5 !7 !9 @1 !6 !8 @0 e VCR set up submenu !0 Recording mode .
43 E Using the Full Range of Features PLA Y MENU, cont. q VCR set up submenu q Recording mode .................... 20 w Output channel .................... 104 e Audio dubbing 101 r W ind screen .......................... 70 t Audio mode .............
44 E Using the Full Range of Features C.CAM MENU SEL.SETSET MENUCLOSE STITCH AST CAM.SET UP CARD SET UP VCR SET UP DISP.SET UP SYSTEM RETURN 1 3 5 2 4 7 6 2 C.
45 E Using the Full Range of Features 2 C. PLA Y MENU CARD PLAY ( VCR ) MV5i MC e VCR set up submenu !2 A V or headphones ................. 32 r Display set up submenu !3 Brightness ............................. 26 !4 LCD Mirror mode................. 27 !5 TV screen .
46 E Using the Full Range of Features q -1 Card operations submenu (when playing back a single image) q Copy from card to tape ......... 144 w Erase all print marks ........... 130 e Image erase ......................... 131 r Format .................
47 E Using the Full Range of Features r System submenu !7 W ireless controller ................ 49 !8 T ally Lamp ............................ 19 !9 Beep ...................................... 22 @0 T ime zone/ Daylight saving time............. 51 @1 Date/time set .
48 E Using the Full Range of Features Using the Wireless Contr oller The supplied wireless controller can operate the camcorder from a distance of up to 5 m (16 feet). Point it at the camcorder’ s remote sensor while you press the buttons. The tally lamp lights up to let you know that the camcorder is in range and responding to your commands.
49 E Using the Full Range of Features T o pre vent interference from other Canon wireless controllers being used nearby , there are 2 remote sensor modes and an off setting. The wireless controller and the camcorder hav e to be set to the same mode in order to be compatible.
50 E Using the Full Range of Features If y our wireless contr oller isn’t working: Make sure the camcorder and the wireless controller are both set to the same mode. Check the mode the camcorder is set to by pushing any b utton other than the REMO TE SET button on the wireless controller .
51 E Using the Full Range of Features Setting the Date and Time The date and/or time display forms part of the data code. Y ou can choose to display or hide it during playback ( 80). Set the date and time display when you first start using your camcorder .
52 E Using the Full Range of Features Time zone LONDON PARIS CAIRO MOSCOW DUBAI KARACHI DACCA BANGKOK H. KONG (Hong Kong) TOKYO SYDNEY SOLOMON WELLGTN (Wellington) SAMOA HONOLU. (Honolulu) ANCHOR. (Anchorage) L.A. (Los Angeles) DENVER CHICAGO N.Y. (New York) CARACAS RIO (Rio de Janeiro) FERNAN.
53 E Using the Full Range of Features 1. Open the menu and select SYSTEM. 2. Select D/TIME SET and the press the SET b utton. • The year display starts to flash. 3. T urn the selector dial up and down to change the y ear . Press the SET button to mo ve to another part of the display .
54 E Using the Full Range of Features Recor ding Still Images onto a T ape Y ou can record still images like photographs. The camcorder records the picture and sound to tape for se veral seconds.
55 E Using the Full Range of Features • If the subject is unsuitable for autofocus ( 159), the camcorder may not be able to focus, and F may continue to flash white in the display . Continue to hold the PHO TO b utton halfway do wn, then adjust the focus manually with the selector dial.
56 E Using the Full Range of Features T urning the Image Stabiliz er Off W ith most camcorders, e ven the slightest hand mov ements will be noticeable during telephoto recording. Howe ver , the MV5/MV5i/MV5i MC’ s image stabilizer allows you to obtain steady recordings e ven at high magnification.
57 E Using the Full Range of Features Using the V arious Recor ding Pr ograms The camcorder provides you with a choice of 8 recording programs. They use dif ferent combinations of camcorder settings in order to adjust the exposure and other functions to match the recording situation.
58 E Using the Full Range of Features 1. Slide the program selector to Q (pr ogram AE) mode. 2. Press the SET b utton to display the program menu. 3. T urn the selector dial to mov e the arrow up or do wn the display . 4. Press the SET b utton to select the desired pr ogram.
59 E Using the Full Range of Features The simplest way to use the camcorder is with the program selector set to the [ position. The camcorder will take care of focus, exposure and other adjustments, leaving you free to point and shoot. Easy Recording Sports This program is useful for recording high-speed sports scenes in brightly lit conditions.
60 E Using the Full Range of Features Use this program in places where the background is so bright that the subject appears underexposed in the display — a sunn y beach or ski resort, for example. Y ou may notice some shudder when recording moving subjects.
61 E Using the Full Range of Features Using Digital Effects Use the camcorder’ s digital effects for more interesting productions. Faders: Start or end scenes on a tape with a fade to or from black ( 62). Fade T rigger, Wipe, Corner , Jump, Flip, Puzzle, Zigzag, Beam, Tide Ef fects: Add flav our to your recordings ( 64).
62 E Using the Full Range of Features Fade T rigger (F ADE-T) Wipe (WIPE) Corner Wipe (CORNER) The image begins as a thin v ertical line in the centre of the screen and expands side ways until it fills the whole screen. The image is wiped off from both sides of the screen.
63 E Using the Full Range of Features Puzzle (PUZZLE) Zigzag (ZIGZA G) The image appears in 16 pieces. The pieces mov e around until the puzzle is solved. The image di vides into 16 pieces. The pieces mov e around and disappear . F aders The image appears in zigzag from the top of the screen.
64 E Using the Full Range of Features Effects Black and White (BLK & WHT) The image becomes black and white. Art (ART) The image becomes like a paint (solarization). Ball (BALL) The image becomes a ball. Cube (CUBE) The image becomes a cube and rotates.
65 E Using the Full Range of Features Digital effects can be set with the controls on the body of the camcorder or the wireless contr oller . SET D .EFFECTS ON/OFF MENU Operating faders Sound and image fade together . When operating faders in T APE CAMERA mode, make sure the program selector is set to Q .
66 E Using the Full Range of Features Operating effects Sound records/plays back normally . * Make sure the program selector is set to Q . 1. Press the D .EFFECTS SELECT b utton to open the digital effects menu. • D.EFFECT | , F ADER, EFFECT and MUL TI-S appear .
67 E Using the Full Range of Features 4 images 9 images 16 images Divides your display image into 4, 9 or 16 smaller images with the Image Capture feature.
68 E Using the Full Range of Features 7. Select the desired setting . • Y ou return to the digital effects menu. 8. Press the D .EFFECTS SELECT b utton to close the menu. • The digital effects menu disappears. • MUL TI-S flashes in the display .
69 E Using the Full Range of Features A udio Recor ding T o switch to the 16-bit mode, open the menu and select VCR SET UP . Then select A UDIO MODE, set it to “16 bit” and close the menu. • “16 bit” is shown in the display for approximately 4 seconds.
70 E Using the Full Range of Features T o turn it on, open the menu and select VCR SET UP . Then select WIND SCREEN, set it to ON and close the menu. •W S O is shown in the display when you turn the wind screen on.
71 E Using the Full Range of Features Setting the Self-Timer 1. Open the menu, select VCR SET UP and set the SELF-TIMER to ON or press the SELF TIMER button on the wir eless controller . • SELF-T appears in the display . • T o hav e the subject monitor recording, rotate the LCD panel 180° ( 27).
72 E Using the Full Range of Features • The camcorder takes the still image for approximately 6 seconds. • If you’ re in T APE CAMERA mode, the camcorder returns to record pause mode after recording to a tape. If you’ re in CARD CAMERA mode, the image that has been recorded appears after recording onto a memory card.
73 E Using the Full Range of Features Adjusting AE Shift 2 1,3 By controlling the lev el of the automatic exposure (AE) function, you can lighten or darken the image slightly . This allo ws you to compensate for backlit, ov erexposed scenes. Make sure the program selector is set to Q .
74 E Using the Full Range of Features 1. Make sur e the camcorder is set to the Q (program AE) mode. 2. Press the SET b utton and choose A UTO from the pr ogram menu. 3. Open the menu and select CAM.SET UP . 4. Select SHUTTER. 5. Press the SET b utton to select the desired shutter speed.
75 E Using the Full Range of Features Guidelines for shooting using high shutter speeds • When shooting with a shutter speed of 1/1000 or higher , do not shoot the sun directly .
76 E Using the Full Range of Features Adjusting Focus Manuall y The camcorder focuses automatically . All you have to do is point and the subject in the centre of the screen will usually be in sharp focus. It may happen that a subject is not suitable for autofocus.
77 E Using the Full Range of Features 1. Make sur e the camcorder is set to the Q (program AE) mode. 2. Open the menu and select CAM.SET UP . 3. Select WHITE B AL. 4. a) F or the indoor , outdoor or auto settings, press the SET b utton to choose the setting.
78 E Using the Full Range of Features Setting the white balance manually will probably work better than auto white balance when shooting: Subjects with one dominant colour , such as sky , sea or fores.
79 E Using the Full Range of Features Y ou can enlarge the image by 2 times during T APE PLA Y (VCR) mode ( : and CARD PLA Y (VCR) mode). Y ou can also move the image up, do wn, to the right or left. • Movies played back from a memory card cannot be enlar ged.
80 E Using the Full Range of Features During T APE PLA Y (VCR) mode, the data code can be displayed or hidden while the camcorder is in play , slow or still mode. Camcorder data may be displayed as “– – –” during fast forward, re wind, re verse playback, forward and re verse × 2 playback.
81 E Using the Full Range of Features Y ou can also choose to display camcorder data (shutter speed and exposure settings) in the data code. DATA CODE•••DATE/TIME DISP.SET UP ( 39) Setting the data code Date/Time Camera data Date/Time & Camera data Time Date & Time Date DA T A CODE (tape only) D/TIME SEL.
82 E Using the Full Range of Features Six-second auto date The 6-second auto date appears for 6 seconds to mark the changeov er of a day if the tape was being recorded at 12:00 midnight. It also appears for 6 seconds when you start playback and hav e the data code turned off.
83 E Using the Full Range of Features Sear ching the T ape (Photo Sear ch/Date Sear ch) This allows you to mo ve quickly through still images recorded an ywhere on a tape (photo search) or between different days or areas of recording (date search) on a tape.
84 E Using the Full Range of Features Returning to a Pre-Marked P osition Use the wireless controller to mark a point on a tape that you want to return to follo wing playback. 1. Press the ZER O SET MEMORY b utton on the wireless contr oller during playback at a point y ou want to retur n to later .
85 E Editing 1. Connect the camcorder to the VCR. • See “Connections for Playback on a TV Screen” on p. 32. 2. Prepar e the TV and VCR. • T urn on the TV and set the TV/VIDEO selector to VIDEO. • T urn on the VCR, and set its input selector to LINE.
86 E Editing MV 5 Dubbing to/fr om a T ape with Digital Video Equipment Digital video equipment fitted with the D V terminal allows you to edit, copy and transfer data digitally , with virtually no loss in image and sound quality . 1. Connect the camcorder and the other digital device.
87 E Editing MV5i / MV5i MC REW PLA Y FF REC P AUSE SEARCH SELECT ZERO SET MEMORY AUDIO DUB. STOP AV INSERT P AUSE SLOW + / – / × 2 The MV5i and MV5i MC are equipped with the D V recording function. The MV5i and MV5i MC are only av ailable in certain areas.
88 E Editing 1. Find a point on y our recorded tape slightly bef ore the section y ou want to copy and set it to playback pause mode. 2. Pr ess the REC P A USE button on the wir eless controller . • The camcorder enters record pause mode. 3. Start playback on the other digital de vice while you monitor the picture.
89 E Editing Concerning copyrighting Copyright precaution Certain pre-recorded video tapes, films and other materials, as well as some television programmes are cop yrighted. Unauthorized recording of these materials may violate copyright protection laws.
90 E Editing OUTPUT VIDEO S(S1)-VIDEO AUDIO L R REW PLA Y REC P AUSE SEARCH SELECT ZERO SET MEMORY AUDIO DUB. STOP AV INSERT P AUSE SLOW – / 1. Connect the camcorder to the VCR. 2. Prepar e the device. • Set the TV/V ideo selector on the tele vision to V ideo.
91 E Editing 1. Find a point on y our recorded tape slightly bef ore the section y ou want to copy and set it to playback pause mode. 2. Press the REC P A USE b utton on the wireless contr oller . • S-video and A V IN/OUT terminals work as input terminals.
92 E Editing Connecting the camcorder to your VCR or 8 mm video camera allows con version of recorded analog video and audio signals to digital signals in an instant. The digital signals can be output to the other equipment with a D V terminal. The camcorder’ s DV terminal w orks exclusi vely as an output terminal.
93 E Editing T urning the analog-digital con ver ter on AV DV OUT•••OFF VCR.SET UP ( 39) T o turn the analog-digital con verter on, open the menu and select VCR SET UP . Then select A V DV OUT , set it to ON and close the menu. Cautions: • For normal use, set A V D V OUT to OFF through the menu.
94 E Editing Recor ding Over Existing Scenes (A V Inser t Editing) MV5i / MV5i MC Y ou can insert new scenes from your VCR or another camcorder onto your pre- recorded tape using the MV5i/MV5i MC’ s analog line-in or DV in terminals. Original video and audio will be replaced with the new video and audio.
95 E Editing Preparations The tape in the MV5i/MV5i MC: When using the MV5i/MV5i MC’ s A V insert function, only record to tapes recorded in SP mode. If there are non-recorded portions or portions recorded in LP mode on the tape, recording will stop.
96 E Editing 1. On the VCR, locate a point 3 seconds befor e the scene to be inserted. Set the VCR to playback pause mode. 2. On the camcorder , press PLA Y and locate the recording start point.
97 E Editing A udio Dubbing MV 5 Y ou can add sound to the original sound on a pre-recorded tape with the internal or an external microphone. The original sound will not be erased. For best results, add sound to tapes that ha ve been recorded with this camcorder in SP mode with 12-bit sound.
98 E Editing Do not connect/disconnect any cables to/from the camcorder when dubbing audio or preparing to dub audio. 1. Locate the point where y ou want to start audio dubbing, then press the P A USE button.
99 E Editing Notes: • Y ou cannot use the D V terminal while adding sound. • Y ou might want to adjust the audio mix ( 103) when playing back a tape with added sound. • There may be a loss of sound quality if you add sound to a tape recorded on a camcorder other than the MV5.
100 E Editing MV5i/MV5i MC OUTPUT AUDIO L R Y ou can add sound to the original sound on a pre-recorded tape from audio products (A UDIO IN) or with the internal or external microphone (MIC. IN). The original sound will not be erased. For best results, add sound to tapes that hav e been recorded with this camcorder in SP mode with 12-bit sound.
101 E Editing AUDIO DUB.••AUDIO IN VCR SET UP ( 39) REW PLA Y FF REMOTE SET SEARCH SELECT ZERO SET MEMORY AUDIO DUB. STOP AV INSERT P AUSE SLOW + / – / × 2 Do not connect/disconnect any cables to/from the camcorder when dubbing audio or preparing to dub audio.
102 E Editing 5. Press the A UDIO DUB. button. • A UDIO DUB. and appear on the display . 6. Press the P A USE b utton (and start play on the other audio device if A UDIO IN). • Audio dubbing starts. • Direct your voice into the microphone. • changes to .
103 E Editing Setting the A udio Mix AUDIO MONITOR MIX BALANCE ST -1 ST -2 When you play back a tape that was recorded in 12-bit mode, you can set the audio output to play: stereo 1 (the original sound), stereo 2 (any ne w sound, dubbed to the tape after recording), or mix the balance between the two.
104 E Editing When you play back a tape whose audio has been recorded on multiple channels, you can change the output channels of that sound. 1. Load a tape recorded with multiple-channel audio. 2. Open the menu and select VCR SET UP . Then select OUTPUT CH, set it to the desired setting and close the menu.
105 E Editing By using a D V cable and connecting the camcorder to a PC equipped with a D V terminal conforming to IEEE 1394/D V compatible capture board, you can transfer images taken with the camcorder to your PC. • While connected, it is recommended that you power your camcorder from a household power sock et using the power adapter .
106 E Using a Memory Card MV5i MC The camcorder can record, store and manage still images/movies on 2 types of memory cards: the SD Memory Card (supplied with the camcorder) or the MultiMediaCard (commercially av ailable). The SD Memory Card has the protect switch to protect your recordings from accidental erasure.
Inserting and removing the memory card 1. T urn the PO WER switch to OFF . • When removing the memory card, make sure the card access indicator is of f. 2. Open the memory card compartment cover in the dir ection of the arro w . 3. Insert or remo ve the memory card.
108 E Using a Memory Card MV5i MC T o change the image quality , open the menu and select CARD SET UP . Then select SI QU ALITY , set it to FINE or ST AND ARD, and close the menu. • The image quality may not differ between the settings depending on the still image.
Maximum Number of Still Images on an 8 MB Memory Card and Their File Sizes Maximum Recording T ime of Movies on an 8 MB Memory Card and Their File Sizes * The actual number v aries on the shooting conditions and subjects. Sample images already recorded on the supplied SD Memory Card are to be included in the total number .
110 E Using a Memory Card MV5i MC FILE NOS.•••CONTINUOUS CARD SET UP ( 39) T o change the file numbering, open the menu and select CARD SET UP . Then select FILE NOS.
111 E Using a Memory Card MV5i MC T urning off the shutter sound Makes the sound of a shutter being released when a still image is recorded to a memory card. SHTR SOUND••ON CARD SET UP ( 39) T o turn the shutter sound off, open the menu and select CARD SET UP .
112 E Using a Memory Card MV5i MC Recor ding Still Images onto a Memory Card 1 2 4 3 Y ou can record still images onto a memory card. In addition to the still images you record directly onto the memory card, you can record images from a tape in the camcorder , or images input via the D V terminal or A V terminal onto the memory card.
113 E Using a Memory Card MV5i MC 4. Press the PHO TO b utton fully down to r ecord the still image. • F disappears from the display . The shutter sound sounds and simultaneously the display appears to close for an instant as if it were a shutter releasing.
114 E Using a Memory Card MV5i MC Recor ding Still Images from a T ape 3 2 1 Record an image from a tape onto a memory card as still images. T o automatically record multiple still images from a tape to a memory card, refer to “Copying Still Images from T ape to Memory Card” ( 143).
115 E Using a Memory Card MV5i MC Recor ding Still Images from Other De vices (VCR, TV or Other Digital Camcor ders) 1. Connect the camcorder to the other device. 2. Prepar e the other device. 3. Load a memory into the camcorder . 4. T urn the camcorder’ s PO WER switch to PLA Y (VCR) and the T APE/CARD switch to T APE.
116 E Using a Memory Card MV5i MC 1. Start playback on the other device. 2. When the image y ou want to record appears in the display , press the PHO TO b utton halfway down and hold it. • The image appears as a still image in the display . • The number of images that can still be recorded on the memory card appears in the display .
117 E Using a Memory Card MV5i MC Recor ding Movies onto a Memory Car d Y ou can record movies onto a memory card. T ransferring the movie to a PC allo ws you to view it on the PC or to attach it to your e-mail (please refer to the CANON DIGIT AL VIDEO SOLUTION DISK for detailed instructions).
118 E Using a Memory Card MV5i MC Recor ding Movies fr om a T ape Y ou can record a movie from a tape to a memory card. • The data code of the movie will reflect the date and time it has been recorded to the memory card. 1. T urn the PO WER switch to PLA Y (VCR).
119 E Using a Memory Card MV5i MC Recor ding Movies fr om Other De vices (VCR, TV or Other Digital Camcor ders) Y ou can record images from a VCR or TV connected through the S-terminal or A V terminal (analog line-in), as well as images from other digital camcorders connected through the D V terminal onto the memory card as movies.
120 E Using a Memory Card MV5i MC Recor ding P anoramic Images (Stitch Assist) Y ou can merge separate images into one lar ge panoramic scene using the supplied software (PhotoStitch) on a PC. Y ou can shoot a subject that won’t f it into a single frame, such as a landscape, and stitch it together later .
121 E Using a Memory Card MV5i MC Notes: • The overlapped area should be set between 30 to 50% of the frame. Discrepancies abov e and below the frame can be automatically compensated if within 10%. • Make sure that no moving subject is included in the o verlapping area.
122 E Using a Memory Card MV5i MC Pla ying Back a Memory Car d CARD SLIDE SHOW Play back and view still images/mo vies recorded on a memory card. (For details on connecting to a TV , see “Connections for Playback on a TV Screen” on p. 32.) Y ou can also enlarge the still images by 2 times while vie wing ( 79).
123 E Using a Memory Card MV5i MC ● Single Image 1. T urn the PO WER switch to PLA Y (VCR). 2. Move the T APE/CARD switch to CARD . • The last still image/movie recorded appears in the display . • Movies will be displayed with the f irst scene as a still image.
124 E Using a Memory Card MV5i MC ● Slide Show With an still image/mo vie in the display , press the SLIDE SHO W button. • Still images are automatically played back one after another . • Movies are played back normally . T o stop the slide show , press the SLIDE SHO W button.
125 E Using a Memory Card MV5i MC Y ou can easily erase unwanted still images/movies recorded to the memory card while viewing them, protect them from accidental erasure, or mark a still image for printing. (File Operation) Movies will be displayed with the f irst scene as a still image, indicated by a movie frame.
126 E Using a Memory Card MV5i MC ● Erasing still images/movies Erase still images/movies singly or all at once. • Y ou cannot erase protected still images/movies. Cancel image protection f irst in order to erase an image. • Erase still images/movies with caution.
127 E Using a Memory Card MV5i MC 1. With a still image/mo vie in the display , press the SET button to open the FILE OPER. menu. • PR O TECT , PRINT MARK , and IMA GE ERASE settings appear . • If you select | RETURN, the menu disappears from the display .
128 E Using a Memory Card MV5i MC Preventing Accidental Erasure (Pr otect) CARD SLIDE SHOW This section describes how to protect the still image/mo vie from the Card Operation submenu when displaying an index screen in CARD PLA Y (VCR) mode (including the way to cancel the setting) .
129 E Using a Memory Card MV5i MC Marking a Still Image f or Printing (Print Mark) This section describes how to mark the still image for printing from Card operation submenu in CARD PLA Y (VCR) mode (including the way to cancel the setting). • When displaying an index screen, you can mark the still image for printing.
130 E Using a Memory Card MV5i MC PRINT MARKS ALL ERASE CARD OPER. ( 39) Erasing all print marks Make sure a memory card that has a still image recorded on it has been inserted into the camcorder . 1. With a still image in the display , open the menu and select CARD OPER.
131 E Using a Memory Card MV5i MC This section describes how to erase the still image/mo vie from the Card Operation submenu when playing back a single still image/movie in CARD PLA Y (VCR) mode. (SINGLE or ALL) Y ou can also erase a still image/movie through File Operation menu ( 127).
132 E Using a Memory Card MV5i MC 5. Select YES and press the SET b utton. • The still image/movie erases and the pre vious still image/movie appears for erasing. • T o erase another single still image/movie, mo ve to that still image/movie with the CARD +/– buttons, and select YES.
133 E Using a Memory Card MV5i MC Using the Car d Photo Printer CP-10 (Optional) Y ou can print out still images recorded to the memory card by connecting the Card Photo Printer CP-10 (optional) directly to the camcorder without using a PC. It can also be used with the print mark settings ( 129).
134 E Using a Memory Card MV5i MC 2. Press the SET b utton. • The print dialog appears. 3. Make sur e that [Print] is selected and press the SET b utton. • Printing starts and, when it is completely finished, the display will return to playback mode.
135 E Using a Memory Card MV5i MC Selecting the number of copies Y ou can set the number of copies to a maximum of 9 prints. 1. T urn the selector dial so that [SET] appears next to [Copies] and press the SET b utton. 2. T urn the selector dial and specify the number of copies.
136 E Using a Memory Card MV5i MC 2. Press the SET b utton. • The dialog for selecting the image style appears. 3. T urn the selector dial, select [Multiple] and pr ess the SET button. 4. Press the Menu b utton. [Borders] can only be selected when the image style is set to [Standard].
137 E Using a Memory Card MV5i MC 4. Select [Borderless] and press the SET b utton. 5. Press the Menu b utton. Setting the Printing Area [Printing Area] cannot be selected when the still image is set to [Bordered]. 1. On the print dialog, select [Printing Area] and pr ess the SET button.
138 E Using a Memory Card MV5i MC Cancel Printing Press the SET button while the [No w printing] dialog is displayed. A confirmation dialog displays. Make sure that [OK] is selected and press the SET b utton. • A print in progress cannot be stopped.
139 E Using a Memory Card MV5i MC 3. If y ou wish to print without changing the style settings, make sur e [OK] is selected and press the SET b utton. • Printing starts and, when it is completely finished, the display will return to playback mode. If you wish to change the style settings, select [Style] and press the SET button.
140 E Using a Memory Card MV5i MC Combining Images and Recording Them to a Cassette (Card Mix) Enhance the appearance of your recordings by combining still images from the memory card with camcorder recordings.
141 E Using a Memory Card MV5i MC MIX LEVEL••• CARD MIX –+ MIX TYPE••••CARD CHROMA ( 39) Make sure a memory card that has images recorded on it and a cassette ha ve been inserted into the camcorder . 1. Make sur e the camcorder is set to the Q (program AE) mode.
142 E Using a Memory Card MV5i MC 4. Select MIX TYPE. • CARD CHR OMA, CARD LUMI., CAM. CHR OMA settings appear . 5. Select the desired setting . • Y our currently recording image is combined with the pre-recorded still image. 6. Select MIX LEVEL and press the SET b utton.
143 E Using a Memory Card MV5i MC Copying Still Ima ges from T ape to Memor y Card Copies multiple still images from a tape to the memory card, using the Photo Search function. • The still images’ data codes will reflect the date and time the copies are made.
144 E Using a Memory Card MV5i MC Copying Still Ima ges from Memory Card to T ape Make sure a memory card that has images recorded on it and a cassette that has enough recordable space hav e been inserted into the camcorder . 1. Locate the point on the cassette where y ou want to start copying and set it to stop.
145 E Using a Memory Card MV5i MC Formatting a Memory Card Format ne w memory cards, if you get the message CARD ERR OR, or to permanently and quickly erase all the still images/movies on a memory card, including protected still images/movies (this includes the pre-recorded card mix sample images).
146 E Using a Memory Card MV5i MC Utilizing Memory Card Still Ima ges/Movies on a PC Y ou can download still images/mo vies from a memory card to a PC connected via the USB interface. By using the provided softw are, you can organize and store still images/movies and print out still images with added titles or frames.
147 E Using a Memory Card MV5i MC Other Inf ormation and Precautions The camcorder formats memory cards in DCF (Design rule for Camera File system). Still images/movies recorded on a memory card with .
148 E Using a Memory Card MV5i MC • Do not use memory cards in places subject to strong magnetic fields. • Do not disassemble memory cards. • Do not bend or drop memory cards, or expose them to strong vibrations or external shocks. • Do not get memory cards wet.
149 E Using a Memory Card MV5i MC Card luminance key SD Memory Card SDC-8M Specifications Capacity 8 MB Interface SD Memory Card standard Operating temperature range 0°C – 40°C (32°F– 140°F) Dimensions 32 × 24 × 2.1 mm (1 1 / 4 × 1 × 1 1 / 8 ) W eight 2 g ( 1 / 8 oz) W eight and dimensions are approximate.
150 E Additional Information Preparing the Camcor der • Set the camcorder to T APE CAMERA mode. Adjust the viewf inder focusing lev er to suit your eyesight. • T o view with the vie wfinder , make sure the LCD panel is either turned so that the subject can monitor viewing, or totally closed with the screen facing inwards.
151 E Additional Information Notes on Using the Batteries Charging and recor ding times • These times vary — the safest polic y is always to ha ve 2 or 3 times as man y battery packs as you think you will need. • Y ou will get more recording time if you turn the camcorder off between shots, instead of leaving it in record pause mode.
152 E Additional Information T aking care of the batter y pack Always attach the terminal cover . • Do not allow an y metal objects to touch the terminals, as this can cause a short circuit and damage the battery pack. Attach the terminal cover whenev er the battery pack is not being used.
153 E Additional Information D ANGER! T reat the battery pack with car e. • Keep it a way from f ire (or it might explode). • Do not expose the battery pack to temperatures greater than 60°C (140°F). Do not leav e it near a heater , or inside a car in hot weather , for example.
154 E Additional Information Maintenance A void high temperatures and high humidity . • Do not leav e the camcorder inside a car in hot weather , for example. • Be careful of heat radiating from video lighting equipment. • Do not take the camcorder into a humid room.
155 E Additional Information LCD • Clean the LCD screen using a commercially av ailable cleaning cloth for glasses. • Where there is a big change in temperature, moisture may form on the surface of the screen. W ipe clean with a soft, dry cloth. • At low temperatures the display may appear to be much dark er than usual.
156 E Additional Information Po wer sources • Y ou can use the compact power adapter and battery char ger to operate your camcorder and charge battery packs in an y country where the electricity supply is between 100 and 240 V A C, 50/60 Hz. Contact your Canon dealer for information about plug adapters for ov erseas use.
157 E Additional Information Condensation Condensation may form on the camcorder when it is mov ed from a cold place to a warm place. Using the camcorder while condensation is present can damage both the tape and the camcorder .
158 E Additional Information T r oubleshooting Refer to this checklist first if you ha ve an y problems with your camcorder . Possible explanations are gi ven for each problem on the list — turn to the page numbers in parentheses for more information.
159 E Additional Information Problem ? Some/all of the digital effects don’t work. ? The e (play) button doesn’t work. ? There’ s a bright stripe on the screen. ? The playback picture is r ough (with mosaic-like noise). Note: • Some subjects are not suitable for autofocus.
160 E Additional Information • A V/PHONES is not set to A V in the menu. •A V DV OUT (Analog-digital con verter) is not set to OFF in the menu. • The video heads need cleaning ( 155). • The TV/VIDEO selector on the TV isn’t set to VIDEO ( 33-35).
161 E Additional Information Miscellaneous Cause and/or what to do about it • The remote sensor mode is set to OFF B in the menu ( 49). • The remote sensor modes of the wireless controller and the camcorder itself are different ( 49). • The batteries are dead or not inserted.
162 E Additional Information The MV5/MV5i/MV5i MC System Diagram (A vailability diff ers fr om area to area) TV WL-D77 Wireless Controller MiniD V Video Cassette CA-PS 700 Compact P ower Adapter CBC-N.
163 E Additional Information Optional Accessories Battery Packs The Battery Pack BP-2L12 can also be used with the MV5/MV5i/MV5i MC. WD-28 Wide-con verter This lens decreases focal length by a factor of 0.7, gi ving you a wide perspectiv e for indoor shots or panoramic views.
164 E Additional Information This mark identifies genuine Canon video accessories. When you use Canon video equipment, we recommend Canon-brand accessories or products bearing the same mark.
165 E Additional Information Screen Displa ys T o display the date and time, press the D A T A CODE button. See also p. 80. Press the wireless controller’ s TV SCREEN button or turn TV SCREEN on through the menu to see the other displays on the TV screen.
166 E Additional Information Shows ho w much battery power remains ( 151). The battery pack is exhausted ( 151). No cassette is loaded, or it is set for erasure prev ention ( 16, 17). Remaining tape (Green: more than f iv e minutes. Y ellow: less than fi ve minutes.
167 E Additional Information 1/250 16b i t M 0:00:00 T W T W CAM.MENU SEL. S MEN U CARD MIX CAM.SET UP VCR SET UP DISP.SET UP SYSTEM RETURN Zoom display ( 23): Optical zoom Optical plus 40 × digital zoom Optical plus 200 × digital zoom Zoom in Zoom out The image stabilizer is turned on ( 56).
168 E Additional Information DV IN Audio input and Microphone input ( 100) Audio input Microphone input D V input ( 86, 115) Analog-digital con verter ( 92) Condensation warning ( 157) MV5i / MV5i MC .
169 E Additional Information Current still image/T otal number of still images on the memory card ( 122) Protect mark ( 125) Card mix ( 140) Print mark ( 125) Data code ( 80) Formatting a memory card ( 145). Erasing still images ( 131). Connecting to a PC ( 146).
170 E Additional Information Recording reminder When you start recording, the camcorder counts from 0 sec to 10 sec. Shots which are shorter than ten seconds may be diff icult to edit later .
171 E Additional Information Appears as a warning to protect the tape and also when condensation is detected. Remov e the tape as soon as possible after the camcorder has displayed the caution.
172 E Additional Information Appears immediately after you start recording, and the video heads are badly contaminated. Make sure to clean the video heads when this caution appears. ( 155) An error has occurred with the memory card. The camcorder can not record or play back.
173 E Additional Information Specifications MV5/MV5i/MV5i MC Po wer Supply (rated): 7.4 V DC Po wer Consumption (while recording with the AF turned on): 3.
174 E Additional Information Estimated SD Memory Card SDC-8M capacities (approx.): 1024 × 768: Superfine 14 images/Fine 20 images/Standard 39 images 640 × 480: Superfine 35 images/Fine 52 images/ Standard 86 images • The actual number you can record varies depending on the images.
175 E Additional Information Index 16:9, 21 Å Abroad, Using the Camcorder , 156 Accessories, 7, 163 AE Programs, 57 AE Shift, 73 Analog line-in**, 90 Analog-digital con verter , 92 Audio Dubbing, 97 .
176 E Additional Information Ø Optional Accessories, 163 ∏ Pause, Record, 18 PC Connection, 105, 146 Photo Search, 83 Playback Connection, 32 Playback Pause, 29 Playing Back a T ape, 28 Playing Bac.
177 E Additional Information Û Zero Set Memory , 84 Zooming, 23 * MV5i MC only ** MV5i/MV5i MC only #6_ MV5/MV5i/MV5i MC_E(150-180) 02.4.17 7:20 PM Page 177.
178 E Additional Information Menu at a Glance Use the list below to quickly na vigate the camcorder’ s menu. Functions are listed alphabetically . Function First make sure the camera is set to... Then select it from this submenu and set. 16:9 effect CAM.
179 E Additional Information Function First make sure the camera is set to... Then select it from this submenu and set. LCD Mirror mode Mix level Mix type Output channel Print mark Record mode Remote sensor mode Shutter speed Still Image Quality Still Image Size Stitch assist Tally lamp DISP.
180 E Additional Information Function First make sure the camera is set to... Then select it from this submenu and set. Time zone/DST TV screen White balance Wind screen SYSTEM DISP.SET UP CAM.SET UP VCR SET UP MV5i MC MV5i MC MV5i MC CAMERA PLAY ( VCR ) CARD CAMERA MV5i MC CARD PLAY ( VCR ) MV5i MC #6_ MV5/MV5i/MV5i MC_E(150-180) 02.
PRINTED IN JAP AN MPRIME A U JAPON © CANON INC. 2002 D Y8-9020-106-000 PUB.DIE-171 0201A/Ni9.5 CANON INC. Canon Europa N.V . P .O . Box 2262, 1180 EG Amstelv een, the Netherlands Canon UK Ltd. Ribcon W ay Luton Bedfordshire LU4 9UR T elephone 0870-241-2161 Canon Australia Pty .
デバイスCanon MV5の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Canon MV5をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCanon MV5の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Canon MV5の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Canon MV5で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Canon MV5を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCanon MV5の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Canon MV5に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCanon MV5デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。