CanonメーカーPowerShot S110の使用説明書/サービス説明書
ページ先へ移動 of 110
ENGLISH • Please start by reading the Pr ecaution on the reverse side of this cover . • Please see the user’ s guide for the printer for operating instructions for Car d Photo Printer CP-10.
Precautions Camera Body T emperature If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. About the LCD monitor The LCD monitor is produced with extremely high-precision manufacturing techniques.
1 T able of Contents Read This First ................................................................................... 5 Quick Start ....................................................................................... 10 Preparing the Camera Guide to Components .
2 T able of Contents Reviewing an Image Immediately after Recording It ...... 33 Changing the Default Review Setting ............................ 34 Adjusting the Zoom (Angle of View) ............................... 35 T elephoto / W ide Angle .......
T able of Contents 3 Print Settings (DPOF Settings) Displaying the Print Settings Menu .................................. 63 Setting the Print Style ....................................................... 64 Selecting Images for Printing .............
4 T able of Contents Appendices Care and Maintenance of the Camera ............................. 90 T roubleshooting ................................................................ 91 List of Messages .................................................
5 Read This First Please Read T est Shots Before you shoot images of subjects of impor tance to you, we str ongly recommend that you shoot several trial images to confir m that you are operating the camera corr ectly .
6 Read This First WARNINGS • Do not aim the camera directly into the sun or at other intense light sources which could damage your eyesight. • Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light pr oduced by the flash may damage eyesight.
Read This First 7 • Do not allow the equipment to come into contact with, or become immersed in, water or other liquids. Do not allow liquids to enter the interior . The camera has not been waterproofed. If the exterior comes into contact with liquids or salt air , wipe it dry with a soft, absorbent cloth.
8 Read This First • Before you discard a battery , cover the terminals with tape or other insulators to prevent dir ect contact with other objects. Contact with the metallic components of other materials in waste containers may lead to fire or explosions.
Read This First 9 Pr eventing Malfunctions A void Strong Magnetic Fields Never place the camera in close pr oximity to electric motors or other equipment generating str ong electromagnetic fields. Exposur e to strong magnetic fields may cause malfunctions or cor rupt image data.
10 Quick Start Charge the Battery Pack ( ➜ p. 15 ) Place the battery pack in the battery charger and plug the charger into the electrical outlet. The charge indicator will glow orange while the battery pack is charging and change to green when it is fully charged.
Quick Start 11 Slide the mode switch to (shooting) ( ➜ p. 25). Focus ( ➜ p. 32) Aim the camera at the subject and press the shutter button halfway . The camera will focus automatically and beep twice. Shoot ( ➜ p. 32) Press the shutter button down fully .
12 Pr eparing the Camera Guide to Components Front V iew * T o connect Card Photo Printer CP-10 (Optional), use the dir ect interface cable provided with the printer . T o connect a computer , use the USB interface cable supplied with the camera. Use the supplied AV cable to connect to a TV .
Preparing the Camera 13 Back View = CF Card Slot Cover ➜ p. 20 = Strap Eyelet ➜ p. 23 = Battery Cover ➜ p. 17 = Viewfinder ➜ p. 26 = Lock for the CF Card Slot Cover ➜ p. 20 = LCD Monitor ➜ p. 27 = T ripod Socket = DC Coupler T erminal Cover ➜ p.
14 Preparing the Camera = (Display) Button ➜ p. 27 = (Menu) Button = (Macro) / (Infinity) / (Right) Button ➜ p. 41 = (Continuous) / (Self-Timer) / (Left) Button ➜ p. 42 = (Flash) / (Set) Button ➜ p. 39 Operation Panel = Indicators = Main Switch ➜ p.
Preparing the Camera 15 Charging the Battery Pack Recharge the battery pack with battery charger CB-2LS or CB-2LSE the first time you use the camera or when the “Change the battery pack” message is displayed. Battery charger model names and types vary by region.
16 Preparing the Camera Handling Pr ecautions • Do not rapidly overturn or wave the battery charger around when the battery pack is in it. There is a danger of the battery pack flying out. • At low temperatur es, the battery pack performance may be r educed and the low battery icon may appear earlier than usual.
Preparing the Camera 17 Installing the Battery Pack Install Battery Pack NB-1L (supplied) as shown below . • Please recharge the battery pack ( p. 15) before you use it for the first time. Battery Lock • Slide the battery cover in the direction of the arr ows.
18 Preparing the Camera Battery Performance Recordable Images Replay T ime LCD Monitor On LCD Monitor Off Battery Pack NB-1L Approx. 120 shots Approx. 270 shots Approx. 85 min. (fully charged) • The actual performance may var y from the above data according to the shooting conditions and the shooting mode.
Preparing the Camera 19 Using a Household Power Sour ce It is best to power the camera with AC Adapter Kit ACK500 (sold separately) when you are using it for long periods of time or connecting it to a computer . • T urn the camera power off before connecting or disconnecting the AC adapter .
20 Preparing the Camera Installing a CF Card T ur n the camera power off and insert the CF car d with the following procedur es. • Slide the lock down and open the CF card slot cover . • Insert the CF card until the slot’ s eject button fully extends.
Preparing the Camera 21 Handling Pr ecautions for CF Car ds • CF cards are high-precision electr onic devices. Do not bend them, apply force to them, or subject them to shocks or vibration.
22 Preparing the Camera Setting the Date and Time • The Set Date / T ime menu will appear the first time the camera power is turned on or whenever the built-in rechargeable lithium battery charge is low . Star t from Step 5 to set the date and time.
Preparing the Camera 23 • After you select the date format, the date format will take effect when you press the button. • The LCD monitor will return to the shooting mode.
24 Basic Functions T urning the Power O n / Of f Press and hold the main switch until the green indicator blinks. • The lens will extend when the mode switch is set to . • The lens will retract appr oximately 1 minute after the mode switch is set to from .
Basic Functions 25 Switching between the Shooting / Replay Modes Shooting Slide the mode switch to the position. Replay Slide the mode switch to the position. • Y ou should also slide the mode switch to to print an image with Card Photo Printer CP-10 (optional) (p.
26 Basic Functions This camera is equipped with an optical viewfinder . Viewfinder Align the square brackets (autofocus metering field) inside the viewfinder on the primary subject to compose the image.
Basic Functions 27 Using the LCD Monitor The LCD monitor can be used to compose images while shooting, adjust settings menus and r eplay images. • The image in the LCD monitor will darken in strong sunlight or bright light. This does not constitute a malfunction.
28 Basic Functions Remaining Image Capacity (Recordable seconds r emaining for movies) p. 36 p. 44 p. 45 p. 37 p. 37 p. 39 p. 42 p. 41 p. 35 p. 27 Shooting Mode Exposure Compensation White Balance Compression Resolution Flash Shooting Method Macro/Infinity Zoom Setting* Camera Blur W arning x2.
Basic Functions 29 The following information may also be displayed with some images. A sound file (WA VE file) is attached. A sound file in a format other than the WA VE format is attached or the file format is not recognized.
30 Basic Functions LCD Monitor Menus / Switching between Display Modes Zoomed View Entire Image (Single Image Replay) Replay (Mode switch set to ) Auto Manual Stitch Assist Movie Shooting (Mode switch set to ) The following menus will show on the LCD monitor accor ding to the selected shooting mode.
Basic Functions 31 Switches between Sets of Nine Images Displays Nine Images (Index Replay) Closes the Setup menu and prepares the camera for shooting.
32 Basic Functions Pressing the Shutter Button The shutter button features a two-stage action. Pressing Halfway The camera uses the first stage to automatically set the exposure, autofocus and white balance. When it has finished metering, two beeps sound and the upper indicator glows green.
Basic Functions 33 Reviewing an Image Immediately after Recording It Images display in the LCD monitor (r egar dless of its On/Off status) for 2 seconds immediately after recor ding even if you release the shutter button. Images can also be r eviewed with the following procedur es.
34 Basic Functions Changing the Default Review Setting The default review time is appr oximately 2 seconds. This can either be turned off or set to appr oximately 10 seconds. Display the Rec. menu ( ➜ p. 77) • is not available in the modes. • Use the or button to select the icon.
Basic Functions 35 Adjusting the Zoom (Angle of View) The zoom can be adjusted to any setting in the 35 to 70 mm range in 35 mm film equivalent terms. T elephoto / Wide Angle Pressing (telephoto) on the zoom lever zooms in, making the subject appear larger in the composition.
36 Shooting Selecting a Shooting Mode The camera features the following shooting modes. Auto Most settings are automatically selected by the camera. Manual The exposure compensation, white balance and other settings can be manually selected. Stitch Assist Images are shot in overlapping series to create single panoramic images.
Shooting 37 Changing Resolution / Compression Settings Still image r esolution and compression settings and movie r esolution settings can be adjusted to suit your requir ements. Resolution settings get progr essively higher ranging fr om the (Small) and (Medium) to the (Large) settings.
38 Shooting Resolution (Movies) Select [640 x 480], [320 x 240] or [160 x 120]. Compression Select [Superfine], [Fine] or [Normal]. Compression Resolution (1600 x 1200 pixels) 957 KB 611 KB 302 KB (10.
Shooting 39 Red-Eye The main flash may fire automatically as required by Reduction the light level. The red-eye reduction lamp fires whenever Auto the flash fires. Auto The flash fires automatically as r equired by the light level. On The flash fires with every shot.
40 Shooting Please note that a slow shutter speed will be selected in dark places when the flash is set to off or slow-synchro. Be car eful to avoid camera blur under these conditions. • Shooting in Mode Be careful to hold the camera still to avoid camera blur .
Shooting 41 / Shooting Close-Ups / Infinity Shots Macro Mode Use this mode to record subjects in the range of 10 to 57 cm (3.9 in. to 1.9 ft.) from the lens tip when at maximum wide angle and in the range of 27 to 57 cm (10.6 in. to 1.9 ft.) when at the maximum telephoto setting.
42 Shooting Shooting Continuously • Set the shooting mode to . • Display . • The camera will shoot continuously at approximately 2.5 images per second* (Large and Fine settings with the LCD monitor off) while the shutter button is held down. Recording ceases when the shutter button is released.
Shooting 43 Using the Self - Timer • Set the shooting mode to , , , or . • Display . • When the shutter button is pr essed, the self-timer indicator will flash and the shutter will activate after 10 seconds. The self-timer indicator will flash at a faster rate two seconds before the picture is taken.
44 Shooting Adjusting the Exposur e Compensation An image can be under -exposed if the subject is backlit or positioned in a bright location. Lights in night shots may also appear too bright. T o avoid under -exposing the image, use the exposur e compensation function.
Shooting 45 Setting the White Balance Setting the white balance to match the dominant light sour ce when shooting will adjust the coloring of the image (excluding images) to the correct settings for the pr evailing light conditions. Auto The camera sets the white balance automatically.
46 Shooting Shooting in Stitch Assist Mode Stitch Assist mode can be used to shoot images, which overlap, and which can later be merged to create one panoramic image on a computer . • T o merge the images on the computer , use PhotoStitch, one of the supplied programs.
Shooting 47 • Set the shooting mode to or . • The LCD monitor will turn on. • Shoot the first frame in the series. • The exposure and white balance settings are set and locked with the first image. Successive images use the same settings. • Make the brightness in each image consistent.
48 Shooting • Compose the second image so that it overlaps a portion of the first and shoot. • Pressing the or button allows you to check the images that have been recor ded. • Minor discrepancies in the overlapping portions can be corrected when the images are stitched together .
Shooting 49 Shooting a Movie Use the movie mode to shoot movie clips. • Set the shooting mode to . • The LCD monitor will tur n on. • The available r ecor ding time (seconds) will display . • Press the shutter button fully to start recor ding images and sounds.
50 Shooting • Three resolution settings (640 x 480 pixels, 320 x 240 pixels, 160 x 120 pixels) are available for movies (p. 37). • Sound is recorded monophonically . • The beep will not sound in the middle of a movie clip recording. • QuickTime 3.
Shooting 51 Functions A vailable in Each Shooting Mode The chart below is a refer ence for the settings available for various shooting conditions. The settings selected in each shooting mode are saved when switching between shooting modes. * Default value.
52 Replaying Displaying Images Singly (Single Image Replay) • The last recor ded image will appear in the display (single image replay). • Press the button to switch the display to the previous image. The button switches to the next image. Hold down the button to advance through the images more rapidly .
Replaying 53 • An image can be magnified approximately 2.5 times in the single image replay mode. • Press the or button to move the selection area left or right and hold the button while pressing the or button to move the selection area up or down.
54 Replaying • The last recorded image will appear in the display (single image replay). • A set of up to nine images will appear in the display (index replay). • Y ou can change the image selection with the or button. Pr essing on the zoom lever displays the selected image in single image replay mode.
Replaying 55 Switching between Sets of Nine Images • Successive sets of nine images can be shown in the display . • Press the button to display the previous set of nine images. The button displays the next set of nine. • Pressing on the zoom lever restor es the index replay mode.
56 Replaying Replaying Movies Movie clips can be replayed with the following pr ocedures. • Use the or button to select a movie. • Movies cannot be played in the index replay mode. • The movie images will play . • Pressing the or button during replay stops it and displays the previous or next image.
Replaying 57 Rotating Images in the Display Images can be rotated 90º or 270º clockwise in the display . 0º (Original) 90º 270º • Use the or button to select . • Cycle between the 90º/270º/0º orientation each time you press the button. • Press the button several times until the replay scr een reappears.
58 Replaying Automating Playback (Auto Play) All of the images on a CF card can be displayed one-by-one automatically with the auto play function. Each image is displayed for approximately 3 seconds. • Use the or button to select . • The camera will read the images on the CF car d and start auto play .
Replaying 59 Pausing and Resuming Auto Play • Pressing the button temporarily pauses auto play . Press the button again to resume auto play . • If the or button is pressed while auto play is paused, the display can be switched to the previous or next image, respectively .
60 Replaying • Use the or button to select . • Use the or button to select an image. Press the button to protect it. • Pressing the button protects the image. If the button is pressed a second time, the protection is removed. Protecting Images Y ou can protect important images to pr event their accidental erasur e.
61 • Please note that erased images cannot be recovered. Exercise adequate caution before erasing a file. • Protected images cannot be erased with this function. • Use the or button to select . • Use the or button to select the image you wish to erase.
62 Erasing Image Erasing All Images • Please note that erased images cannot be recovered. Exercise adequate caution before erasing a file. • Protected images cannot be erased with this function. • Use the or button to select . • Use the or button to select [OK].
63 Print Settings (DPOF Settings) Images on a CF card can be individually selected for printing in a specified number of copies. The print type and date or file number printing options can also be selected.
64 Print Settings (DPOF Settings) Setting the Print Style The following settings can be selected. Standard Prints one image per page. Index Prints selected images at reduced size on a single sheet in an index format. Print T ype Both Prints the images in both standard and index formats.
Print Settings (DPOF Settings) 65 (Date) Y ou may select either [On] or [Off]. (File No.) Y ou may select either [On] or [Off]. • Use the or button to select a setting. Press the button. • Press the button several times until the replay scr een reappears.
66 Print Settings (DPOF Settings) • Use the or button to select an image. • The zoom lever can be used to switch between the single and index replay (3 images) modes for image selection. • Pressing the button displays the 3 4 icon so that the number of print copies can be specified.
Print Settings (DPOF Settings) 67 Index • Use the or button to select an image. • Pressing the button causes a check mark icon to appear . Pressing the button a second time deselects the image. Check Mark for Index Printing • Press the button several times until the replay scr een reappears.
68 Print Settings (DPOF Settings) Resetting Print Settings Resetting the print settings removes them fr om all the selected images and resets the print type to [Standar d], the date setting to [Off] and the file number setting to [Of f]. Display the Print Order menu ( ➜ p.
69 Printing with Car d Photo Printer CP-10 The optional Card Photo Printer CP-10 can be used to print images directly and ef fortlessly from the camera. It can also print images marked with DPOF print settings. Connecting Car d Photo Printer CP-10 • T wo direct interface cables are shipped with Card Photo Printer CP-10.
70 Printing with Card Photo Printer CP-10 • After you connect the printer , slide the mode switch to and turn on the camera. If you switch from mode to mode when the camera power is already on, the lens will retract immediately .
Printing with Card Photo Printer CP-10 71 • Press the button to start printing. • The LCD monitor returns to the replay mode when the print concludes successfully . Printing Errors • Use the or button to select [Stop] or [Resume]. • The [Resume] option does not display with some types of error .
72 Printing with Card Photo Printer CP-10 Printing with DPOF Print Settings Card Photo Printer CP-10 can print images marked with DPOF print settings, excluding those with the print type set to [Index]. • Use the or button to select [Print]. • Use the or button to select [OK].
Printing with Card Photo Printer CP-10 73 Stopping Printing • If the button is pressed while printing is underway , a confirmation message will appear . • Use the or button to select [OK]. • Pressing the button stops the print queue after the image currently printing is finished.
74 Printing with Card Photo Printer CP-10 • Press the button to r esume printing. • The LCD monitor returns to the replay mode when printing concludes successfully . Printing Errors • Use the or button to select [Stop] or [Resume]. • The [Resume] option does not display with some types of error .
Printing with Card Photo Printer CP-10 75 Setting the Print Style The following settings can be selected. Standard Prints one copy of one image per sheet . Image Multiple Prints 8 copies of one image on a single sheet. Use the Multiple setting to print on adhesive labels.
76 Printing with Card Photo Printer CP-10 Date Select [On] or [Off]. • Use the or button to select the desired option and pr ess the button. • Press the button to complete the procedur e. • The date and border settings cannot be selected for images set to [Multiple] in the [Image] menu (they will print without dates or borders).
77 Camera Settings Displaying the Rec. Menu Camera settings are adjusted with the Rec. menu accor ding to the following procedur es. For instructions on changing the resolution and compression , please see page 37. Please see page 34 to learn how to change the review time for images.
78 Camera Settings About File Numbers • Images are assigned individual frame numbers ranging fr om 0001 to 9900 and organized in folders containing up to 100 images. The folders are assigned names fr om 100 to 998. (Folder numbers cannot contain 99 in the last two digits.
Camera Settings 79 Display the Rec. Menu ( ➜ p. 77) Setting the Beep On / Off A beep sounds for confirmation purposes when the shutter button is pressed or a camera setting is changed. The beep can be turned off. • Use the or button to select . • Use the or button to select [On] or [Off].
80 Camera Settings Formatting CF Cards New CF cards must be formatted in accor dance with the following procedur es before use. • Please note that formatting a CF card erases all its data, including protected images and other types of data. • Use the or button to select .
Camera Settings 81 Changing Other Settings Switching the Auto Power Down Function On / Off The auto power down function can be set to automatically turn the camera power off after a set period of time passes without the camera being used.
82 Camera Settings Setting the V ideo Signal Format T o use a TV monitor to shoot or replay images, the video signal format can be switched to suit regional standar ds. Display the Rec. Menu ( ➜ p. 77) • Use the or button to select . • Use the or button to select .
Camera Settings 83 Setting the Language The language in which menus and messages are displayed can be selected with this function. Display the Rec. Menu ( ➜ p. 77) • The Language menu can also be displayed in replay mode by holding down the button and pressing the button.
84 Shooting / Replaying with a TV Monitor A TV monitor can be used to view images as they are shot or replayed when it is connected to the camera via the supplied A V cable (A VC-DC200). Always tur n the camera and TV power off before attaching or detaching the A V cable.
85 Downloading Images to a Computer Downloading Dir ectly from a CF Car d Images can be loaded directly fr om a CF car d to a computer if you ar e using a notebook computer , a PC card reader or a CF car d reader .
86 Downloading Images to a Computer Downloading Images Double-click the icon of the drive with the CF card. Copy the photographed images to the desired folder on the hard disk. The images are contained in the [XXXCANON] folder inside the [DCIM] folder on the CF card.
Downloading Images to a Computer 87 Connecting the Camera to a Computer with a USB Cable Supported Operating Systems Windows Windows 98 (Including the Second Edition) Windows Millennium Edition (W ind.
88 Downloading Images to a Computer • Operating the camera simultaneously with other USB devices, excluding USB mice and keyboards, may not work cor r ectly . If this occurs, disconnect the other devices and then r econnect the camera. • Do not have mor e than two cameras connected to a computer with the USB interface at any time.
Downloading Images to a Computer 89 Slide the camera’ s mode switch to . • The replay scr een will display and when the connection to the computer is complete, the LCD monitor will shut of f and the indicator will glow green.
90 Appendices Care and Maintenance of the Camera Use the following procedur es to clean the camera body , lens, viewfinder and LCD monitor . • Never use thinners, benzene, synthetic cleansers or water to clean the camera. These substances may distort or damage the equipment.
Appendices 91 T r oubleshooting Camera will not operate Cause Solution • Press the main switch for a few moments. • Close the battery cover or CF car d cover and then press the main switch again to turn the camera off. • Insert a fully charged battery pack.
92 Appendices Lens will not retract Cause Solution • First close the battery cover or CF card cover and then turn the power off. • First close the battery cover or CF card cover and then turn the power off. Battery pack consumed quickly Cause Solution • Replace the battery pack with a fresh one.
Appendices 93 Image is blurred, out of focus, or not as expected Cause Solution • Be careful not to move the camera when pressing the shutter button. • Be careful not to block the AF auxiliary light emitter with your fingers or other items. • Ensure that ther e is at least 57 cm (1.
94 Appendices Subject is too bright Cause Solution • When using the flash, ensure that the camera is no closer to the subject than 27 cm (10.6 in.). • Adjust the exposure compensation to a negative (-) setting. • Change the shooting angle. • Set the flash to any setting other than On.
Appendices 95 List of Messages The following messages may appear in the LCD monitor . Busy ...: Image is being recorded to, or r ead from, CF car d No CF card: Y ou attempted to shoot or replay images without a CF card installed. Cannot record!: Y ou attempted to shoot an image without a CF card installed.
96 Appendices Incompatible JPEG format: Y ou attempted to replay an incompatible JPEG file. Corrupted Data: Y ou attempted to replay an image with corrupted data.
Appendices 97 Exx: (xx: number) Camera malfunction. T ur n the power off and then back on, then shoot or replay . Problem exists if error code r eappears. Note the number and contact Canon Customer Support Help Desk. If an error code displays dir ectly after taking a picture, the shot may not have been recorded.
98 Appendices Specifications PowerShot S110 DIGIT AL ELPH / DIGIT AL IXUS v Image Sensor: Approx. 2.11 million- pixel 1 / 2.7 in. CCD (effective pixels: appr ox. 2.02 million) Lens: 5.4 (W) - 10.8 (T) mm (35 mm film equivalent: 35 - 70 mm) F2.8 (W) - 4.
Appendices 99 Self-Timer: Shoots after approx. 10 sec. PC Connected Shooting: Available (USB connection only . Exclusive software program “RemoteCapture” is included in the Camera Kit.
100 Appendices Accessories Battery Pack NB-1L T ype: Rechargeable Lithium Ion Cell Nominal V oltage: 3.7 V T ypical Capacity: 680 mAh Cycle Life: Approx. 300 times Operating T emperatures: 0 - 40 ºC (32 - 104 ºF) Dimensions: 32.3 x 49.8 x 10.6 mm (1.
Appendices 101 Index A AC Adapter Kit 19 Autofocus 26 Auto 36 Auto Play 58 Auto Power Down 24 On/Off 81 A V Cable 84 B Battery AC Adapter 19 Handling 16 Household Power Source 19 Installing 17 Perform.
102 Appendices R Rec. Menu 77 Red-Eye Reduction 40 Replay 28, 52 TV Monitor 84 Resolution 37 Rotate 57 S Self-T imer 43 Shooting 28, 36 TV Monitor 84 Functions Available in each Shooting Mode 51 List .
Appendices 103 Disclaimer • While every effort has been made to ensur e that the infor mation contained in this guide is accurate and complete, no liability can be accepted for any errors or omissions. Canon reserves the right to change the specifications of the har dware and software described her ein at any time without prior notice.
104 Appendices Canon Customer Support Canon Inc. 30-2 Shimomaruko 3-chome, Ohta-ku, T okyo 146-8501, Japan NOR TH AMERICA Canon U.S.A., Inc. Canon Customer Care Center Phone (US): 1-800-828-4040 (Available Mon. - Fri., 9 AM to 8 PM Easter n T ime) Canon Canada Inc.
Appendices 105 Canon Italia S.p.A. Pronto Canon: 02 8249 2000 Canon Belgium N.V . / S.A. Helpdesk: 0900-10627 T el.: (02) 722.04.11 Fax: (02) 721.32.74 Canon Luxembourg S.A. T el.: (352) 48 47 961 Fax: (352) 48 47 96232 Canon Nederland N.V . Helpdesk: 023 - 5 681 681 T el.
106 Appendices OCEANIA Canon Australia Pty . Ltd. Info-Line: (02) 9805 2864 Canon New Zealand Ltd. Info-Line: 0900-522666 ASIA Canon Singapor e Pte. Ltd. 79 Anson Road, #09-01 / 06, Singapor e 079906 Phone: (65) 532 4400 Fax: (65) 221 7577 Canon Hongkong Co.
FCC Notice (Digital Camera, Model PC 1012) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference r eceived, including interference that may cause undesired operation.
CDI-E020-010 0301CHX.X © 2001 CANON INC. PRINTED IN JAPAN.
デバイスCanon PowerShot S110の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Canon PowerShot S110をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCanon PowerShot S110の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Canon PowerShot S110の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Canon PowerShot S110で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Canon PowerShot S110を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCanon PowerShot S110の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Canon PowerShot S110に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCanon PowerShot S110デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。