CanonメーカーPro70の使用説明書/サービス説明書
ページ先へ移動 of 124
This guide explains the functions of this product. Please read it to understand the corr ect handling procedur es before using the product. Hardware Guide.
Intr oduction Thank you for pur chasing a Canon PowerShot Pro70 Digital Camera. The PowerShot Pr o70 is a high-quality , high-resolution digital camera.
1 Confirm the Contents of the Package The package in which the camera is shipped should contain the items below . Please contact your camera distributor if you should find anything missing.
2 T ry the basic camera operations (p. 38) Installing the Batteries, CF Card and Strap (p. 23) Erase Unwanted Images (p. 84) Review Images • Check Y our Images on the Spot (p. 48) • Replay Images (p. 69) Shooting • Shooting in Auto Mode (p. 35) • Changing the Image Size and Compression Settings (p.
3 Processing Images on a Computer (See the Software Guides) (Images that have been loaded onto a computer can be saved to hard or floppy disks.) Use and Process Images • Create Wide Images: PhotoSti.
4 T able of Contents Read This First 7 Handling and Safety Precautions 7 Guide to Components 13 Pr eparing the Camera 23 Using the Battery Pack 23 Charging the Battery Pack 23 Installing the Battery P.
5 Continuous Shooting Mode Settings 54 Shooting in Aperture-Priority AE Mode 56 Aperture-Priority AE Mode Settings 56 Exposure Compensation 59 Shooting with the Self-T imer 61 Shooting with the EOS Re.
6 Erasing 84 Erasing the Displayed Image Directly 84 Erasing Images Singly 85 Erasing All Images 86 Protecting Images 87 Additional Functions 89 Displaying the Setup Menu 89 Closing the Setup Menu 90 .
7 Read This First Read This First Handling and Safety Precautions Thank you for purchasing a Canon pr oduct. Please ensure that you r ead and understand these handling and safety precautions befor e you operate your PowerShot Pr o70 Digital Camera.
8 Read This First Safety Precautions • Before using the camera, please ensur e that you have read and understood the safety precautions described below .
9 Read This First • Do not attempt to disassemble or alter any part of the equipment that is not expressly prescribed in this guide. Disassembly or alteration may r esult in high-voltage electrical shock.
10 Read This First • Do not handle the power adapter cord if your hands ar e wet. Handling it with wet hands may lead to electrical shock. When unplugging the cord, ensur e that you hold the rigid portion of the plug.
11 Read This First • Before you discar d a batter y , cover the terminals with tape or other insulators to prevent dir ect contact with other objects. Contact with the metallic components of other materials in waste containers may lead to fir e or explosions.
12 Read This First • Do not store the equipment in humid or dusty ar eas. Storage in these areas could lead to fire, electrical shock or other damage. • Be careful not to bang the camera or subject it to str ong impacts or shocks that could lead to injury or damage the equipment when wearing or holding it by the strap.
13 Read This First Guide to Components Front V iew Viewfinder Window Accessory Shoe (p. 64) Mode Dial (p. 16) T erminal Cover (p. 16) Strap Holder (p. 37) Zoom Lever (p.
14 Read This First Back View ( with LCD Monitor Open ) Strap Holder (p. 37) + Button Set Button - Button Indicators (p. 15) Microphone (pp. 67, 74) Optical Viewfinder (p. 46) Bottom V iew Control Panel (p. 17) T ripod Socket Battery Cover (p. 25) Adjustment Dial for the Optical Viewfinder T urn this dial to adjust the viewfinder focus.
15 Read This First Indicators These lights shine or flash when the shutter button is pressed to confirm various actions and camera modes. • Upper Indicator Green: Ready to take pictur e (no flash) F.
16 Read This First External T erminals Open the terminal cover . Remote T erminal Attach the optional EOS Remote Switch RS-80N3 here. Digital T erminal Attach an interface cable here to connect to a computer . Mode Dial The mode dial can be used to select the camera mode and turn the camera power on and off.
17 Read This First Control Panel CF Button (p. 35) Menu Button The names of the three buttons above the display panel ar e written in blue or gray . • Blue indicates the function in play mode. • Gray indicates the function in either auto or program mode.
18 Read This First Display Panel Icons, symbols and numbers indicating the camera status (such as camera settings, the battery charge and the approximate number of images r emaining) are shown here.
19 Read This First 1 2 21 12 0 -- ++ Battery Status (Flashing) (Flashing) (Flashing) Charged Low battery Non-operable Low button battery Date/time not set Remaining Images and Camera Status Shooting M.
20 Read This First The LCD monitor automatically shuts off when you close it all the way until it clicks. Always close the LCD monitor for protection when not in use. The LCD monitor can be set to the following positions. 1. Open the LCD monitor and tilt it 180 ° forward.
21 Read This First 2. Fold the LCD monitor back against the camera body until it clicks. The screen faces back and outward. Icons and messages will appear on the LCD monitor and the image will appear in its natural orientation.
22 Read This First Power Save Function The camera is equipped with a power save function. When the mode dial is in any position other than lock, the power automati- cally turns off in the following cir cumstances. • Shooting The camera powers down after approxi- mately 3 minutes if a function is not accessed.
23 Preparing the Camera Pr eparing the Camera Using the Battery Pack Use r echargeable Battery Pack NB-4H, which is bundled with the camera, as the battery power source. Ensur e that the battery pack has been fully charged before you install it in the camera.
24 Preparing the Camera 1. Attach the power cord to the compact power adapter and plug the power cord into the electrical outlet. 2. Insert the battery pack into the socket at the top of the compact power adapter . The charging indicator will flash green while it is charging.
25 Preparing the Camera Installing the Battery Pack Once the battery pack has been fully charged, install it in the camera with the following procedur es. 1. Ensure that the mode dial is set to lock. 2. Slide the battery cover in the direction of the arrow .
26 Preparing the Camera Checking the Battery Charge The battery charge can be checked by turning the mode dial to the play , auto or program modes and viewing the battery icon in the display panel. (Steady): Charged (Flashing): Low Battery: replace or recharge the battery soon.
27 Preparing the Camera 2. Insert the battery pack into the socket at the top of the compact power adapter . 3. Press the refresh button on the side of the compact power adapter . The charging indicator will flash orange while refr eshing the battery pack.
28 Preparing the Camera Using an AC Power Sour ce It is convenient to power the camera with the DC coupler and compact power adapter connected to an AC power sour ce when operating indoors. This is particularly r ecommended when the camera is connected to a computer and exchanging files, a r elatively power -intensive process.
29 Preparing the Camera Using a 2CR5 Lithium Battery When a charged Battery Pack NB-4H is unavailable, use a generic 2CR5 lithium battery in the camera. Install a 2CR5 lithium battery as shown. 2CR5 • It is advisable to use Battery Pack NB-4H or an AC power source as the standard power source for the camera.
30 Preparing the Camera Replacing the Button Battery and Setting the Date/Time The camera is equipped with a button battery to maintain the date and time settings even when the main battery is removed. When the button battery charge runs out and the date and time settings are lost, the button batter y icon( ) flashes in the display panel.
31 Preparing the Camera Setting the Date/Time After the button battery has been replaced, follow the procedur es below to reset the date and time settings. 1. Set the mode dial to play , auto or program. 2. Press the menu button. The menu will display on the LCD monitor .
32 Preparing the Camera 4. Press the + or - button to advance the selection to [Date/T ime]. Pr ess the set button. + - SET 5. Press the + or - button to change the setting and the set button to advance to the next field. A 24-hour clock is used. (Example: one- thirty in the afternoon becomes 13:30) 6.
33 Preparing the Camera Setting the Menu Language 1. Set the mode dial to play . 2. While you press and hold the set button, press the jump button. The language menu will display on the LCD monitor . 3. Press the + or - button to advance the selection to the language of your choice.
34 Preparing the Camera Installing a CF Car d Install CF cards as the storage media for the images recor ded by the camera. Up to two CF cards may be installed at once. • One CF card is bundled with the camera. Please purchase another to install a second card.
35 Preparing the Camera 5. Lift up the tab of the eject button slightly and fold it over . 6. If required, repeat steps 4 and 5 to insert a second CF card into the empty slot.
36 Preparing the Camera • Do not remove the battery or remove a CF card while the camera is writing to a CF card, erasing images or reading from a CF card. • A CF card is a high-precision electronic component. Do not bend, apply force to, or subject it to shocks or vibrations.
37 Preparing the Camera Switching between CF Cards If two CF cards ar e installed, use the CF button to select between them. 1. Set the mode dial to auto, program or play . 2. Press the CF button to display the number of the CF card slot containing the card you wish to use in the display panel.
38 Quick Start Guide Shooting in Auto Mode In auto mode, all you need do is pr ess the shutter button to shoot an image. The focus and aperture settings ar e automatically adjusted by the camera.
39 Quick Start Guide • When the upper indicator flashes green, the autofocus has failed to focus. Y ou can proceed to take the pictur e by pressing the shutter button all the way , but your subject may not be in focus. 4. After the beeps, press the shutter button all the way .
40 Quick Start Guide Erasing Images Y ou can erase the images you have recor ded on the CF card. By deleting unwanted images, you can make greater use of the CF car d’ s capacity . 1. Set the mode dial to play . The last recorded image will display on the LCD monitor .
41 Quick Start Guide 3. Press the + or - button to advance the selection to [Erase]. Press the set button. 4. Press the + or - button to advance the selection to [Single]. Press the set button. 5. The image in step 1 will appear . Press the + or - button as required to display the image you wish to erase.
42 Quick Start Guide 7. When you have finished erasing unwanted images, press the menu button. Pressing the menu button a second time closes the play menu.
43 Quick Start Guide Loading Images onto a Computer Y ou can load the images you have shot onto a computer and save them to disk and edit or retouch them.
44 Shooting Shooting Basic Shooting Functions Selecting a Shooting Mode Select a shooting mode with the mode dial. • Auto Mode Set the mode dial to auto. In auto mode, you simply point and shoot because the camera sets all of the settings for you. • The image quality can be set to either normal or fine (p.
45 Shooting Shutter Button • Pressing Halfway Press the shutter button halfway and hold it there to automatically set the optimal focus on the subject in the center of the optical viewfinder and select an exposure setting. A double beep will sound when this is complete.
46 Shooting Optical Viewfinder The camera features an optical viewfinder for use in taking standard shots. • Autofocus Target Marks When composing images, aim the camera so that the subject is in the middle of the target marks and press the shutter button halfway to activate the autofocus.
47 Shooting • Use the LCD monitor to compose images in macro mode. The actual area shot by the lens is slightly lower in macro mode than it appears in the optical viewfinder (p.
48 Shooting Using the LCD Monitor Y ou can use the LCD monitor as a viewfinder for shooting images. It is particularly r ecommended for shooting in macro mode, since the field shown by the optical viewfinder differs fr om the actual area photographed in that mode.
49 Shooting 2. Press the menu button. 3. Select [Review] by pressing the + or - button. Press the set button. 4. Select [On] by pressing the + or - button. Press the set button. 5. Press the menu button to close the menu. Each time you press the menu button it will either display the prior menu or close it.
50 Shooting Changing the Image Quality and Size The camera can shoot with the following image quality and size settings. Symbol Screen Size Quality (Compression Method) File Size (fine) L Large (1536 .
51 Shooting • In Program Mode The settings are ef fective until the quality and size settings are next changed. MULTI QUALIT Y 2. Press the quality button repeatedly until the desired quality and size combina- tion appears in the display panel.
52 Shooting Adjusting the Zoom Use the zoom lever to adjust the zoom setting. 1. Set the mode dial to auto or program. 2. Adjust the zoom setting by pushing the zoom lever up or down.
53 Shooting up to approximately a 49 mm setting if the zoom lever is pushed in the direction of the wide angle setting. 3. Set the LCD monitor to a comfortable position for viewing and press the LCD/ Video button. 4. Confirm the composition in the LCD monitor and shoot the image.
54 Shooting Continuous Shooting Mode In continuous shooting mode, up to 20 frames may be shot in one sequence. However , the image size is automatically set to small. Y ou can raise the speed of the continuous shooting by turning the LCD monitor off and setting the image quality to normal.
55 Shooting 4. Release the shutter button when finished the continuous shooting sequence. The images in the internal memory will be written to the CF card. The indicator will flash green while the images ar e being written to the CF card and no other camera functions can be operated.
56 Shooting 3. Press the menu button. Instead of pressing the menu button, you can skip step 4 and go on to step 5 by pressing and holding the set button and pressing the +/- button. MENU SET INFO + - Shooting in Apertur e-Priority AE Mode In aperture-priority AE mode, you can select the apertur e setting to control the depth of field.
57 Shooting 4. Select [Aperture] by pressing the + or - button. Press the set button. 5. Select an aperture setting by pressing the + or - button. Press the set button. Full Open: Aperture set to maximum. The F-Stop value will vary with the zoom setting.
58 Shooting 7. Press the shutter button halfway . A double beep will sound and the shutter speed will display in the LCD monitor . • If the aperture setting you have chosen results in the subject being too dark, the upper indicator will flash red (camera blur warning/low light war ning) and the shutter speed will display in red.
59 Shooting • The following operations will cancel the aperture-priority AE mode. - T urning off the LCD monitor . - Closing the LCD monitor . - Powering down the camera with the power save function. T o shoot for extended periods of time in aperture- priority AE mode, it is advisable to turn off the power save function (p.
60 Shooting The cursor on the exposure compensation scale will also display in the LCD monitor if it is on. 3. Adjust the exposure compensation using the + or - button. Press the set button or the +/- button to accept the setting. 4. Shoot the image. The LCD monitor will display the icon if it is on.
61 Shooting • Program Mode 3. Press the shutter button halfway , wait for the double beep and then press the shutter button all the way . The self-timer will activate, 10 seconds later a single beep will sound and the shot will be taken. The self-timer lamp on the front of the camera will flash while the self-timer is working.
62 Shooting 4. When you have finished with the self- timer , press the drive button again. The self-timer icon will disappear from the display panel. • The self-timer mode is canceled by setting the mode dial to a new position. • The self-timer lamp may not be visible from some angles in front of the camera.
63 Shooting Shooting with the EOS Remote Switch The camera can be used with the optional EOS Remote Switch RS-80N3. It can also be used with the optional EOS Remote Switch 60T3, an older version, with the optional RA- N3 Adapter . Attaching the Remote Switch Open the terminal cover and attach the remote switch to the r emote terminal.
64 Shooting Shooting with a Flash An optional flash may be attached to the camera to accommodate full-fledged flash photography . EOS Speedlite EX series flashes (220EX and 380EX) are r ecommended for use with this camera. • The flash will not fire in continuous shooting mode.
65 Shooting • Program Mode (aperture-priority AE mode) The flash will fire at full str ength under the following conditions. Shutter Speed: 1/90 second fixed ISO Sensitivity: 100 equivalent (large i.
66 Shooting Using Other Flashes 1. T urn on the flash’ s power switch and set the camera’ s mode dial to program. The flash cannot be fired in auto mode. 2. Set the aperture-priority AE mode (p. 56). The flash will fire at full str ength under the following conditions.
67 Shooting A sound annotation can be added with the camera’ s microphone to an image immediately after it is shot. The recor ded sound annotation can be replayed on a computer . 1. Shoot an image in auto or program mode. 2. While you press and hold the micro- phone button ( ), press the set button.
68 Shooting Listening to a Sound Annotation A sound annotation can be replayed on a computer . Please read the Software Guide for details..
69 Replaying Single Image Playback Y ou can view recor ded images one at a time on the LCD monitor . 1. Set the mode dial to play . The last recor ded image will display in the LCD monitor . Replaying This section describes the play function. In addition to basic replay functions, the camera features slide show and TV replay functions.
70 Replaying 3. Move the selection frame within the display by pressing the + or - button. 4. Press the multi button again to return the display to single image playback. The last selected image will appear in the LCD monitor . • When you wish to change the displayed images in sets of nine images, use the jump mode (p.
71 Replaying 2. The following actions can be taken. T o Display the T enth Image Ahead or Behind • Press the + button to display the tenth image ahead. • Press the - button to display the tenth image behind. T o Display the First or Last Image • While you press and hold the set button, press the + button to display the last image.
72 Replaying T o Display the First or Last Set of Nine Images • While you press and hold the set button, press the + button to display the last set of nine images. • While you press and hold the set button, press the - button to display the first set of nine images.
73 Replaying 2. Pressing the info button again displays even more detailed information. •The Stitch Assist icon ( ) will display for images shot in Stitch Assist mode with a Canon PowerShot A5 or other camera. • The information displayed in multi image playback includes the frame number of the selected image and the total number of images.
74 Replaying Adding Sound Annotations during Playback A sound annotation may be added to an image with the camera’ s microphone while it is displayed in play mode. The recor ded sound annotation may be r eplayed on a computer . 1. In play mode, display the image to which you wish to add a sound annota- tion.
75 Replaying Listening to Sound Annotations A sound annotation can be replayed on a computer . Please read the Software Guide for details. Automated Playback (Slide Show) The camera is equipped with a slide show function that automatically r eplays a CF card’ s images consecutively .
76 Replaying 3. Select [Slide Show] by pressing the + or - button. Press the set button. The slide show menu will display . Use this menu to mark images, play a slide show and perform other slide show functions. Marking Images This function is used to mark or unmark images for replay in a slide show .
77 Replaying 4. Select the first image you wish to show by pressing the + or - button to display it and the set button to mark it. Use the same procedure to mark additional images for replay in the order they are marked. • Y ou can unmark a marked image by selecting it and pr essing the set button.
78 Replaying Clearing Marks This function clears all the mark data for the selected slide show . 1. Display the slide show menu. 2. Select [Clear Marks] by pressing the + or - button. Press the set button. 3. Select a slide show from 1 to 3 by pressing the + or - button.
79 Replaying 3. Select [On] by pressing the + or - button. Press the set button. The repeat setting will be saved by the camera. • The repeat setting will be effective until you change the setting or the camera battery is replaced. Replaying Slide Shows Y ou can play all of the images on a CF card or a slide show containing marked images.
80 Replaying 2. Select [Start] by pressing the + or - button. Press the set button. 3. Select the slide show you wish to view by pressing the + or - button. Press the set button. The [All Images] option plays all the images on the CF car d in order . Setting it to one of the three slide shows will play the marked images in the selected slide show .
81 Replaying Viewing Images on a TV Use the following procedur es to attach the camera to a TV to display your recor ded images. 1. Set the mode dial to lock. T ur n off the TV . 2. Use the supplied video cable to connect the camera’ s video out terminal to the TV’ s video in terminal.
82 Replaying Marking Images for Automatic Printing This function marks images on a CF car d for automatic printing with a digital printer . Place a marked CF car d into the optional CD-200 digital printer to automatically print the selected images in one step.
83 Replaying convenient for navigating if ther e are numerous images on the CF car d. 6. When you have finished marking images, press the menu button. The mark data will be saved to the CF card.
84 Erasing Erasing This section explains how to erase recorded images from a CF card. Erasing the Display Image Directly If you come across an unwanted image in single image playback, you can easily erase it with the following procedur e. 1. Set the mode dial to play and display images in single image playback mode.
85 Erasing Erasing Images Singly This function allows you to erase images one- by-one as they display on the LCD monitor . The sound annotations associated with images can be erased independently of the images. 1. Set the mode dial to play . The last recor ded image will display on the LCD monitor .
86 Erasing 5. Select the image you wish to erase by pressing the + or - button. • T o Erase the Image Press the set button. • T o Erase the Sound Annotation Only Press the micr ophone ( ) button. A confirmation message will display . Select [OK] by pr essing the + or - button.
87 Erasing 3. Select [Erase] by pressing the + or - button. Press the set button. 4. Select [All] by pressing the + or - button. Press the set button. A confirmation message will display . Select [OK] and press the set button. All of the images on the CF card, except for protected images, will erase.
88 Erasing 3. Select [Protect] by pressing the + or - button. Press the set button. The last recor ded image will display on the LCD monitor . 4. Select the image you wish to protect by pressing the + or - button. Press the set button to turn on the protection setting.
89 Additional Functions Additional Functions This section explains additional settings, such as date/time, LCD monitor brightness and menu language settings, and functions, such as copying images between CF cards and formatting CF cards. Displaying the Setup Menu Y ou can display the setup menu from either the recor d menu or the play menu.
90 Additional Functions Closing the Setup Menu 1. Press the menu button to close the setup menu. Each time you press the menu button it will either display the previous menu or close the menu. The setup options for which you pressed the set button will now become ef fective.
91 Additional Functions Setting the Beep On/Off Settings The electronic beep that signals completion of the autofocus process and the closing of the shutter can be turned on or off. 1. Display the setup menu. 2. Select [Beep] by pressing the + or - button.
92 Additional Functions When the power save function is on and the mode dial is set to any position other than lock, the camera will automatically power down under the following cir cumstances. Shooting The camera automatically powers down after approximately 3 minutes if a function is not accessed in a shooting mode.
93 Additional Functions Setting the Date/Time Use this setting to adjust the camera’ s date and time settings and display formats. Ensure that you adjust this setting after replacing the button battery (p. 30). 1. Display the setup menu. 2. Select [Date/T ime] by pressing the + or - button.
94 Additional Functions Resetting the File Number This function r esets the file number that is automatically assigned to a new image as it is r ecorded.
95 Additional Functions 1. Set the mode dial to auto or program. 2. Press the menu button. The recor d menu will display on the LCD monitor . 3. Select [Reset File No.] by pressing the + or - button. Press the set button. The current file number will display to the right of the menu option.
96 Additional Functions Copying Images between CF Car ds When two CF cards ar e installed in a camera, images can be copied from one car d to the other . Y ou can copy single images or all of the images on a CF car d. Copying Images Singly This method allows you to copy selected files between CF car ds as they display on the LCD monitor .
97 Additional Functions 6. Select the image you wish to copy by pressing the + or - button. • The jump function is particularly convenient for navigating if ther e are numerous images on the CF car d. 7. Press the set button to start copying. Repeat these steps to copy additional images.
98 Appendices Appendices Camera Maintenance Follow the procedur es below to clean the camera body , lens, optical viewfinder and LCD monitor when they become dirty . • Never use thinners, benzene, synthetic cleansers or water to clean the equipment.
Optional Accessories The following optional accessories are available for the PowerShot Pr o70. Battery Pack NB-4H Canon Battery Pack NB-4H is a nickel-hydride battery pack intended for exclusive use with the PowerShot Pro70. The battery pack can be charged with Compact Power Adapter CA- PS200 for up to approximately 300 charge cycles.
100 Appendices 1. Fix the case holder to the camera by fitting the screw into the tripod socket on the camera bottom. Semi-Hard Case SHC-PS200 Protects the camera fr om shocks and dust. Install it with the following procedur es. PCMCIA Card Adapter An adapter to fit to a CF car d so that it can be used in a PC card slot in a computer .
101 Appendices 2. Fit the snap at the bottom of the case to the correspond- ing fittings on the case holder . 3. Fit the snaps on the back of the case to the fittings on the back of the case holder . If you use the shoulder strap, pull it fr ee of the case as shown below .
102 Appendices 2. Fix the hard strap holder to the camera by fitting its screw into the tripod socket on the camera bottom. 3. Thread either end of the hard strap through the holders on the camera body and the hard strap holder . On the display panel side of the camera, thread the strap through the narrow slit for the shoulder strap.
103 Appendices EOS Speedlite EX Series Flashes The EOS Speedlite 380EX high volume flash and EOS Speedlite 220EX compact flash, both clip-on type flashes that fit the camera’ s accessory shoe, are available for use with the PowerShot Pro70.
104 Appendices • Close lock lever all the way and close the CF car d slot cover all the way . • Use a fully charged battery pack. • Replace the batter y . • Use an appr oved AC power source. • Use a fully charged Battery Pack NB-4H or a 2CR5 lithium battery .
105 Appendices • W ait to press the shutter button until the flash charges and the indicator changes from flashing red to steady r ed. • Replace the CF car d. • Erase all or some of the car d’ s images to create space. • Reformat the CF car d.
106 Appendices • Attach the video cable cor rectly to the video out terminal on the camera and the video in terminal on the TV . • Pr ess the LCD/V ideo button on the camera to switch to TV display . • Adjust the brightness setting in the setup menu.
107 Appendices • Use macr o mode to shoot close- ups. The subject can be as close as 12 cm from the lens. • In macr o mode, the actual area shot by the lens is slightly lower than it appears in the optical viewfinder (p. 53). Use the LCD monitor to compose the image.
108 Appendices • Change the shooting angle. • Use the battery pack at tempera- tures over 0 ° C. Keep the batter y pack in your pocket or warm it in your hands before shooting in relatively low temperatur es. • Refr esh the battery pack. • This battery pack can no longer be used.
109 Appendices • Seat the battery pack mor e firmly into the charger . • Check the AC power cor d connection between the electrical outlet and the charger . • The batter y pack won’t charge when DC Coupler DR-200 is connected to the compact power adapter .
110 Appendices List of Message Codes - A The following codes may appear in the display panel. Pb Image playback PC Camera connected to a computer in PC mode Exx (xx = number) Camera malfunction. Set mode dial to lock, then r eset it to auto, program or play and retry shot or r eplay .
111 Appendices List of Message Codes - B The following messages may appear in the LCD monitor . Busy Image is recor ding onto CF card CF card full! CF card is too full to accommodate mor e data No Ima.
112 Appendices Major Specifications PowerShot Pro70 Camera Format: Digital still camera Viewfinder: Secondary focused real-image zoom finder . Gives 84% coverage of actual picture area 2-inch, low-temperature, polysilicon, thin-film transistor liquid crystal display Image Sensor: 16.
113 Appendices Lens: Focal Length: 6 - 15 mm (equivalent to 28 - 70 mm in 35 mm format) F/number: F2.0 (wide angle) - F2.4 (telephoto) Zoom Ratio: 2.5 times, autozoom Shutter Format: Mechanical + electronic Speed Range: 1/2 - 1/500 sec. (Large/CCD RA W) 1/2 - 1/8000 sec.
114 Appendices Power Supply: 2CR5 lithium battery (330-frame/100-minute replay capacity)/nickel-hydride Battery Pack NB-4H (190-frame/70-minute replay capacity)/Compact Power Adapter CA-PS200 T est co.
115 Appendices Battery Pack NB-4H Format: Nickel-hydride cell Rated V oltage: 4.8 V Rated Capacity: 1400 mAh Maximum Charge Cycles: Approximately 300 times Operating T emperatures: 0 ° -40 ° C Dimen.
116 Appendices Index +/- Button 59 (Auto Symbol) 16 (Macro Button) 53 (Microphone Button) 67 A AC Power Source 28 Accessory Shoe 13, 64 Adjustment Dial for the Optical Viewfinder 14 AF Auxiliary Light.
117 Appendices F File Number 94 File Size 50 Filter Mount 13 Fine 50 Flash 64 Focus Lock 47 I Icon 18 Image Displaying Information 73 Copying 90 Loading 43 Mark 76, 82 Play 79 Quality 50 Size 50 Indic.
118 Appendices Play Menu XX Play Mode 16 Play Time 78 Power Save 22, 91, 92 Program Mode 16, 44 Protect 87 Protection Setting 87 Print Mark 82 Q Quality 50 Quality Button 50 R Record Menu XX Recording.
119 Canon Customer Support NORTH AMERICA Canon Computer Systems, Inc. Canon U.S.A., Inc. Computer Systems Customer Car e Center Phone (US): 1-800-423-2366 (Automated Support. 24 hours/day , 7 days/week) Canon Canada Inc. Computer Systems Customer Care Centr e Phone (Canada): 1-800-263-1121 (24 hours/day , 7days/week) EUROPE Canon (UK) Ltd.
120 OCEANIA Canon Australia Pty . Ltd. Info-Line: (02) 9805 2864 Canon New Zealand Ltd. Info-Line: 0900-522666 ASIA Canon Hong Kong Co., Ltd. Phone: 852-2739-0802 Fax: 852-2739-6428 Canon Singapore Pte.
121 For : Ulead Photolmpact 4.0 INTERNA TIONAL Ulead Systems, Inc. (T aiwan) T el: +886-2-8787-6740 Fax: +886-2-8787-6741 E-mail: support@ulead.com.tw Ulead Systems, Inc. (USA) T el: +1-310-523-9393 Fax: +1-310-523-9399 E-mail: support@ulead.com Germany Ulead Support Center T el: +49-2602-917-329 Fax: +49-2602-917-327 E-mail: uleadger@aol.
H-IE-XXX-VXA XX98ABX.X ©CANON INC. 1998 PRINTED IN JAP AN.
デバイスCanon Pro70の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Canon Pro70をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCanon Pro70の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Canon Pro70の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Canon Pro70で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Canon Pro70を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCanon Pro70の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Canon Pro70に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCanon Pro70デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。