CanonメーカーS31Sの使用説明書/サービス説明書
ページ先へ移動 of 171
CDI-E215-010 XXXXX CallOll © 2006 CANON INC, PRINTED IN JAPAN >= I- (3 m ;0 O. < Q. (3 ¢) _=. O. CallOll DIGITAL I CDI-E215 iN CAMERA Before Using the Camera Shooting Using the Mode Dial Advan.
• Automatically adjusts shooting settings to match particular conditions • Reduces blurriness with an image stabilizer function • Shoot in high-speed ISO with reduced blurriness from hand or sub.
Conventions Used in this Guide Icons appearing below titles indicate the modes in which the )rocedure can be used. In the example below, the mode dial can be used in the following shooting modes.
Contents Items marked with a _j_ are lists or charts that summarize camera functions or procedures. Please Read ............................................. 5 Safety Precautions ........................................ 6 Preventing Malfunctions .....
Shooting in the Creative Zone ............................... 57 P Program AE Tv Setting the Shutter Speed AM Setting the Aperture M Manually Setting the Shutter Speed and Aperture Registering Settings to the Shortcut Button .................. 61 Selecting an AF Frame .
Automated Playback (Slide Shows) ......................... 105 Protecting Images ....................................... 109 Erasing All Images ...................................... 110 Setting the DPOF Print Settings ............................ 111 Setting the DPOF Transfer Settings .
Handling Precautions Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly.
Video Format Please set the camera's video signal format to the one used in your region before using it with a TV monitor (p. 116). Language Setting Please see the Basic Guide (p. 5) to change the language setting. • Before using the camera, please ensure that you read and understand the safety precautions described below.
• Store this equipment out of the reach of children and infants. Accidental damage by a child could result in serious injury. • Neck strap: Placement of the strap around the child's neck could result in asphyxiation. • Memory card: If swallowed accidentally, contact a doctor immediately.
!!!!!!!!!!!!! • Do not place the battery near a heat source or expose it to direct flame or heat. • The battery should not be immersed in water. • Do not attempt to disassemble, alter or apply heat to the battery. • Avoid dropping or subjecting the batteries to severe impacts that could damage the casing.
i iiillliiiiill i iiliiliiliii liliiiiilli i iiliiliiliiliil • Do not trigger the flash in close proximity to human or animal eyes. Exposure to the intense light produced by the flash may damage eyesight. In particular, remain at least one meter (39 inches) away from infants when using the flash.
m[_rt[tBlT_ i i iiii iii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii ii iii ij i i iii!lii! l ilili .... • Do not get the camera caught on other objects or subject it to strong impacts or shocks when wearing or holding it bythe neck strap.
• Do not operate the flash with dirt, dust or other items stuck to the surface of the flash. • Be careful not to cover the flash with your fingers or clothing when shooting. The flash may be damaged and emit smoke or noise. The resulting heat build-up could damage the flash.
l Before Using the Camera- The Components Guide Front View ® Neck Strap Mounts ® ® ® Self-timer Lamp/Tally Lamp/Red-eye Reduction Lamp (pp. 43, 46, 28) ® Flash (Basic Guide p. 11) ® Microphone (R) (pp. 102, 103) ® Microphone (L) (pp. 102, 103) ® AF-assist Beam (p.
Attaching the Neck Strap Attach the strap as illustrated. Check that the strap does not come loose from the strap mount when pulled. Perform the same steps on the other side of the camera. Attaching the Lens Cap Fit the lens cap over the lens casing so that it covers the entire lens.
Back View _ (Flash)/_ (Microphone) Button (pp, 102, 103, Basic Guide p, 11 ) Mode Dial (p, 46, Basic Guide p, 8) Shutter Button (Basic Guide p, 6) _ Zoom Lever Shooting: [-_] (Telephoto)/[] (Wide Angl.
Operation Panel I m B" 3 (!_ Diopter Adjustment Dial (p, 16) Viewfinder (p, 16) =l" _ Movie Button (p, 46, Basic Guide p, 7) _ Omni Selector A(Up) V(Down) O 3 _(Lef[) I_(Right) "O _ Ind.
l Before Using the Camera - Operations Pressing the DISP. button switches the display mode. The screens that are displayed are based on the [Custom Display] settings (p. 17). Also, closing the LCD monitor causes the viewfinder to display. 1 Press the DISP.
e The LCD monitor and viewfinder display settings are remembered even af[er the camera power is turned off. • The LCD monitor will not switch to the detailed display in the index playback mode (p.
3 [Shooting Info]*/[Grid Lines]*/ Does not display when the [Histogram]. DISP. button is pressed • Using the A, V, _1, and • buttons, select the items you wish to display on the LCD monitor or viewfinder, and press the SET button to place a ,/ mark.
Histogram The histogram is a graph that allows you to judge the brightness of an image, and you can display it in the p, Tv, Av, and M modes to confirm the brightness while shooting. The greater the bias toward the left in the graph, the darker the image.
I m {,] dii_i| [,]il J] _l;-l/_,L_I, I,]ilii[_il i[_ BI _v_ [,-_ i(,] i Shooting mode D ]-1 _tFrar_ ] "1 AF Frame (p. 63) _E_ "1 Low Battery (p. 132) I Stills: Reco;dable Shots .4 Movies: Remaining Time*4/ Elapsed Time -2 * " "+2 Exposure Compensation (p.
"1 Appears even if the LCD monitor is set to display no information. *2 Appears when selected in [Custom Display] (p. 17). *3 This is not normally displayed. It appears when remaining available internal memory (buffer) is half or less during movie recording.
Detailed Histogram (p. 19) 'R P Tv Av M Shooting Modes (pp. 53, 54, 46, 57, Basic Guide pp. 3, 8) _ Still image shot while shooting a movie (p. 49) image with the My Colors effect (p. 100) ISO Speed (p. 69) _. Movie recording Pixels!Frame Rate (p.
o nformation for images shot on other cameras may not display correctly. • Overexposure Warning In the following cases, overexposed portions of the image blink.
When traveling abroad, you can record images with local dates and times simply by switching the time zone setting if you pre-register the destination time zones. You can enjoy the convenience of not having to switch the Date/Time settings. Setting the Home/World Time Zones 1 [] (Set up) Menu _ [Time Zone].
Switching to the Destination Time Zone 1 (Set up) Menu _ [Time Zone]. See Menus and Settings (p, 27) 2 Use the • or 1_ button to select _ (World) _ MENU button. • To change the destination time zone, use the SET button. lf you change the date and time when the World option is selected, the Home date and time will also change automatically.
Menus are used to set the shooting, printing and playback settings as well as such camera settings as the date/time and electronic beep. The following menus are available. • FUNC. Menu • Rec., Play, Print, Set up, and My Camera Menus FUNC. Menu This menu sets many of the common shooting functions.
Rec., Play, Print, Set up, and My Camera Menus Convenient settings for shooting, playback or printing can be set with these menus. It_ (Rec,) Menu -]_ -- [] (Set up) Menu [_1 (Play) Menu J I _ [_ (MyCamera) Menu P.
I_ F-'JI'_, I IL"-[;I FUNC. Menu Menu Item Reference Page [] Exposure Compensation p. 75 _] White Balance p. 77 [] My Colors p. 80 [] Bracket pp. 68, 76 [] Flash Exposure Compensation/Flash Output p. 82 [] Metering Mode p. 73 [] Movie Recording Pixels/Frame Rate p.
Menu Item Options Reference Page Digital Zoom OntOrf*1 p, 41 ([On] is the default setting for Movie mode) Review Off t 2 .I to 10 sec. t Hold Basic p. 7 Save Original On/Off .I p. 56 Reverse Disp. On*ltOff Basic p. 2 IS Mode Offtcontinoous*1tShoot Only*2tPanning .
Play Menu Menu Item Reference Page [] Transition p. 99 [] Slide Show p. 105 m My Colors p. 100 [] Sound Recorder p. 103 _J Protect p. 109 [] Rotate p. 98 m Erase all p. 110 [] Transfer Order p. 114 Print Menu Menu Item Reference Page Print Select Images & Qty.
Set up Menu Menu Item ute )lume Start-up VoL Operation VoL Self timer VoL Shutter Volume Playback Vol. Jdio ;D igh_ese )wer Saving Auto Power Down Display Off _neZone _te/Time )rmat Options On/Off _1 [] (Normal)*lt [] (Bright) On*1tOff 10 sec./20 sac.
Menu Item Options Summary/Reference Page File Number C°ntinu°us*11Aut° p. 90 Reset Create Folder p, 88 Creates a folder for the next shooting session, Check mark (0n)/ No check mark (Off) Off*11Dailyl Mon.-Sun./Monthly On*11Off You can also set a creafJon time.
My Camera Menu Reference Menu Item Options Page Theme Selects a common theme for each My Camera settings item. Sets the start-up image when you turn on He Start-up Image camera. Sets the start-up sound when you turn on He Start-up Sound camera. Sets the sound when any button other than the p.
1 (Set up) Menu _ [Reset All]. See Menus and Settings (p. 27) 2 [OK] _ SET button. • Settings cannot be reset when the camera is connected to a computer or printer. • The following settings cannot be reset to default: -[Date/Time], [Language], [Time Zone] and [Video System] options in the [_ (Set up)] menu (p.
You should always format a new memory card or one from which you wish to erase all images and other data. 1 (Set up) Menu _ [Format]. See Menus and Settings (p. 27) f.Q 2 [OK] ,_ SET button. ._ • To perform a low level format, use the • or • button to select [Low Level Format] and the • or • button to add a check mark.
l Shooting 1 FUNC. Menu @Fill* (Compression/Recording Pixels) @ [] (Recording Pixels). See Menus and Settings (p, 26) • Use the • or • button to select recording pixels settings. • IC_ settings cannot be made in ['_ mode. * Default setting.
Display Pixels [] L (Large) 2816 x 2!!2 pixels [] M1 (Medium 1) 2272 x 1704 pixels [] M2 (Medium 2) 1600 x 1200 pixels [] S (Small) 640 x 480 pixels [] Widescreen 28!6 x !584 pixels Approximate Values for Recording Pixels Recording Pixels Purpose Printing to about A3 size prints* 297 x 420 mm (11.
PAv The flash timing is adjusted to slow shutter speeds. This reduces the chance that only the background will appear dark when a person is shot against a twilight background or night scene, or when an interior shot is taken. 1 [] (Rec.) Menu @ [Slow Synchro] @ [On]/[Off]*.
_ _ _scN c_ _ P Tv Av M The image stabilizer function allows you to minimize the camera shake effect (blurred images) when you shoot distant subjects that have been magnified or when you shoot in dark conditions.
This mode allows even closer shooting of the subject than standard Macro mode, magnifying the subject further. In addition, the background can be shot differently from the standard macro shooting effects. Shooting is possible when the distance from the front of the lens to the subject is in the following range: 0 to 10 cm (0 to 3.
* Default setting. 2 Turn the zoom lever toward [-_ and shoot the image. • When you press the [-_-] button, the zoom stops when the lens reaches the maximum optical telephoto setting (when shooting still images). Press the [-_"_ button again to activate the digital zoom and digitally zoom the image further.
_l _ _ _ SCN • P Tv Av M • Cannot be set in [] and [] modes. In this mode, the camera shoots continuously while the shutter button is held down. In addition, continuous shooting is possible (p. 151 ) at a consistent interval (smooth continuous shooting) with a recommended memory card .
Selecting a Continuous Shooting Method Select either standard or high-speed continuous shooting. 1 (Rec.) Menu _# [Cont. Shooting] _ []/1_. See Menus and Settings (p.
Changing the Self-Timer Countdown Time (m/m) 1 (Rec.) Menu _ [Self-timer] _W*l/m. See Menus and Settings (p. 27) • The following occurs. - []: 2 sec. before the shutter releases, the self-timer sound and lamp will speed up .2. - []: The self-timer sound will play when the shutter button is pressed and the shutter will release 2 sec.
Changing the Delay Time and Number of Shots (m) You can change the delay time (0-10, 15, 20, 30 sec.) and number of shots (1-10). However, the settings cannot be made for the [] (Color Accent), [] (Color Swap), [:_ (Stitch Assist) or ,m (Movie) in the SCN mode.
l Using the Mode Dial _ _ _scN _ P Tv Av M No matter what position the mode dial is in, you can shoot movies .1 with just a push of the Movie button. You can select the movie recording pixels and frame rate (p. 48) and shoot with color effects such as Color Accent, Color Swap, and My Colors.
o hen you press the MF button, AF lock is set at the current focus condition. [] displays on the LCD (or viewfinder). Press the MF button again to release the setting. When AF lock has been registered to the shortcut button, AF can be readjusted and locked while shooting movies by pressing the r_j button (r_ appears on the screen).
_ OWhen movie recording is stopped in any mode dial except _lm the still image settings return to the settings before movie shooting began. AE lock (p. 70) and exposure shift, however, are disabled. • QuickTime 3.0 or later is required to play back movies (Data type: AVl/Compression method: Motion JPEG) on a computer.
Shooting Still Images while Shooting a Movie You can shoot a high quality still image* while shooting a movie. * The recording pixels and compression are the same as those set for still images (excluding []). 1 While shooting a movie, press the shutter button halfway to focus.
Changing the Sound Mode Microphone level (sound recording level), wind filter and sampling rate can be changed. 1 (Set up) menu _P [Audio]. See Menus and Settings (p. 27) 2 [Mic Level] =_ set the sound recording level with the <1or • button. 3 [Wind Filter] "_ [On]*/[Off].
4 [Sampling Rate] _ [44.100 kHz]*/[11.025 kHz]/[22.050 kHz]. • The sound quality increases in the order of the following settings, but the required memory also increases. 11.025 kHz, 22.050 kHz, and 44.100 kHz * Default setting. • Even if the recording volume becomes too loud, it automatically adjusts to avoid distortion of loud sounds.
1 Use the 41 or 1_ button to select the shooting sequence. eYou can select from the following 5 shooting directions. - Left to right horizontally - Right to left horizontally - Vertically, bottom to top - Vertically, top to bottom - Clockwise starting at the top left 2 Shoot the first frame the sequence.
scN(_B) YOU can easily change the colors in an image when it is shot for both stills and movies, allowing you to enjoy producing various effects. Depending on the shooting conditions, however, the images may appear rough, or you may not get the expected color.
3 Complete the setting with the SET button, and shoot. • This completes the setting. OWhen you press the Movie button, you can shoot movies in Color Accent mode. o The default Color Accent is green. • You may not obtain the expected results after color input mode if you use the flash.
L Aim the camera so that the color you wish to change appears at the center of the LCD monitor (or viewfinder) and press the • button. • Only one color can be specified. • You can use the • or • button to specify the range of the colors that are retained.
Saving Original Images Not only can you save images with altered colors when shooting still images with the Color Accent or Color Swap modes, but you can also choose to save the original images (before the color change). 1 (Rec.) menu ._ [Save Original] '_ [On]/[Off].
P Tv Av M You can freely select camera settings such as the shutter speed and aperture value to suit your shooting purposes. After settings are made, shooting procedures are the same as for _ Auto Mode (Basic Guide p. 6). e or information on the relation between the aperture value and shutter speed see p.
Tv Setting the Shutter Speed When you set the shutter speed in the shutter speed-priority AE mode, the camera automatically selects an aperture value to match the brightness.
Shutter Speed Display • The numbers in the table below indicate the shutter speed in seconds. 1/160 indicates 1/160 second. Also, quote marks indicate the decimal _lace, so that 0"3 indicates 0.
Aperture Setting Display • The larger the aperture value the smaller the lens opening, allowing less light to enter the camera. IF2.7 F3.2 F3.5 F4.0 F4.5 F5.0 F5.6 F6.3 F7.1 F8.0 • You can change the combinations of shutter speeds and aperture values without altering the exposure (p.
I Advanced Shooting Functions _ _ _scN _ _ P "Iv Av M One frequently used function can be registered to the r_ (Shortcut) button. You can register the following functions. However, not all functions can be registered depending on the shooting mode.
Registering a Function 1 (Rec.) Menu _ [Set Shortcut button]. See Menus and Settings (p, 27) 2 Use the A, V, < or I_ button to select the function you wish to register @ SET button.
P Tv Av M The AF frame indicates the area of the composition on which the camera focuses and can be set manually to the desired area. This is convenient for focusing accurately on your chosen subject to obtain the composition you desire. 1 Press the [] button.
q-he [] shooting mode cannot be used, It may be difficult to focus on the following types of subjects. • Subjects with extremely low contrast to the surroundings • Scenes with a mixture of near an.
Shooting with the AF Lock *_ and _ mode cannot be set. 1 Aim the camera so that an object at the same focal distance as the main subject is centered in the AF frame. 2 Press the shutter button halfway and press the MF button. • [] and the MF indicator will appear on the LCD monitor (or viewfinder).
Shooting in Manual Focus Mode The focus can be manually set. *_) and _ mode cannot be set. 1 Use the • or • button to adjust the focus while holding down the MF button. • [] and the MF indicator are displayed. OWhen the [_ (Rec.) menu's [MF-Point Zoom] is set to [On] (p.
*In _ mode only [Single] is available, You can switch between focus settings to shoot. Continuous The camera is continually focusing on whatever it is aimed even when the shutter button is not pressed.
P Tv Av M The camera automatically takes three shots: one at the manual focus position, and one each with focus positions preset nearer and farther. The nearer and farther focus positions can be set in three steps: large, medium and small.
_P Tv AvM Raise the ISO speed when you wish to reduce the effects of shaking hands and shoot with the flash off in a dark area or when you wish to reduce the effects of a moving subject and raise the shutter speed. 1 Press the ISO button to switch settings.
=_ P Tv Av You can set the exposure and focus separately. This is effective when the contrast is too strong between the subject and background or when a subject is backlit. 1 Focus on the part of the subject on which you wish to lock the exposure setting.
Changing shutter speed and aperture value combinations Automatically selected combinations of shutter speeds and aperture values can be freely changed without altering the exposure (Program Shift). 1 Turn the mode dial to P, Tv, or Av. 2 Focus on the subject on which you wish to lock the exposure.
P Tv Av You can obtain the correct exposure regardless of the location of your subject in the composition. 1 Raise the flash. 2 Press the _ button and set it to _. (flash on). 3 Focus on the part of the subject on which you wish to lock the flash exposure setting.
P Tv Av M Metering Methods The camera divides images into several zones for light metering. The camera evaluates complex lighting conditions, such as the posiUon of the subject, the [] Evaluative brightness, the background, the direct light, and the backlighting, and adjusts the settings to the correct exposure for the main subject.
Moving the Spot AE Point to the AF Frame/ Centering the Spot AE Point 1 [] (Rec.) Menu _ [Spot AE Point] _ [Center]* or [AF Point]. See Menus and Settings (p. 26) OWhen [Spot AE Point] is set to [Center], the spot AE point frame [ ] appears at the center of the LCD monitor (or viewfinder).
_ _ _ _L_,SCN* c_ PTv Av *Cannot be set in _ and [] modes, Adjust the exposure compensation setting to avoid making a subject too dark when it is backtit or shot against a bright background, or to avoid making lights appear too bright in night shots. 1 FUNC.
P Tv Av The camera automatically takes three shots: one with standard exposure and one each with positive and negative compensation. o The three shots are taken at the same interval as high-speed continuous shooting in the following order: standard exposure, underexposure and overexposure.
Normally, the [] (Auto) white balance setting selects an optimal white balance. When the [] (Auto) setting cannot produce natural looking colors, change the white balance using a setting appropriate to the light source.
Using the Custom White Balance You can set a custom white balance to obtain the optimal setting for the shooting conditions by having the camera evaluate an object, such as a piece of white paper or cloth that you wish to establish as the standard white color.
[_ OYou are recommended to set the shooting mode to p and the exposure compensation setting to zero (-+0) before setting a custom white balance. The correct white balance may not be obtained when the exposure setting is incorrect (image appears completely black or white).
=_ P "iv Av M You can alter the overall impression of an image and shoot. My Colors Settings i My Colors Off Records normally, [] Vivid Emphasizes the contrast and color saturation to record bold colors. Neutral Tones hues. down the contrast and color saturation to record neutral [] I Sepia Records in sepia tones.
• _ Mode Setting the Camera to a Custom Color Mode (p. 81). • Other than _J Mode Press the FUNC. button to return to the shooting screen and begin shooting. * Default setting. [_] he ISO speed will increase with some settings, which may increase the noise in the image.
TvAv Although the built-in flash will fire with automatic flash adjustments (except in the M mode), it is also possible to set it so that it fires without any adjustments. 1 (Rec.) Menu _l, [Flash Adjust] '_ [Auto]*/[Manual]. See Menus and Settings (p, 27) * Default setting.
1 FUNC. Menu _ (Flash)/ _j_ (Flash Output). See Menus and Settings (p, 26) • Adjust the compensation/output using the • or • button and press the FUNC. button. e.g. [Flash Adjust] set to [Auto] e.g. [Flash Adjust] set to [Manual] P Tv Av M 1st-curtain 2nd-curtain 1 The flash fires right after the shutter opens, regardless of He shutter <D.
P Tv Av M You can shoot images at a set interval. This function can be used for fixed-point observation of plants and blooming flowers. The shooting interval time can be set from 1" to 60 minutes and 2* to 100 images can be shot. * Default setting 1 (Rec.
n 0 Press the shutter button. • The first image is shot and the interval shooting session starts. Once the first image is shot, the power is turned off until the next shot, and the LCD monitor (or viewfinder) turns off. (The power automatically turns on immediately before the next shot.
P Tv AvMC You can save frequently used shooting modes and various shooting settings to the C (Custom) mode. When necessary, you can then shoot images with previously saved settings by simply turning the mode dial to C.
_ _ _scN _ P Tv Av M Your camera is equipped with an Intelligent Orientation sensor that detects the orientation of an image shot with the camera held vertically and automatically rotates it to the correct orientation when viewing it in the LCD monitor (or viewfinder).
e hen the camera is held vertically to shoot, the Intelligent Orientation sensor judges the upper end to be "up" and the lower end to be "down". It then regulates the optimal white balance, exposure, and focus for vertical photography.
Create a Folder the Next Time You Shoot 2 Use the • or 1_ to place a check mark beside [Create New Folder] @ Menu button. • _ displays in the LCD monitor (or viewfinder).
_ _ _ _i_,,SCNr_ P Tv Av M F_ The images you shoot are automaticaliy assigned file numbers. You can select how the file number is assigned. 1 ill (Set up) Menu ,_ [File Numbering] _ [Continuous]*1/ [Auto Reset]. See Menus and Settings (p, 27) "1 Default setting.
File and Folder Numbers Recorded images are assigned consecutive file numbers starting with 0001 and ranging up to 9999, while folders are assigned numbers starting with 100 and ranging up to 999.
l Playback/Erasing See the Basic Guide (p. 14). m h,'_j __ll_e 1 Press the _ button. • _% will display and a magnified portion of the image will display. oYou can change the magnification level with the zoom lever. • Images can be magnified up to a factor of approximately 10x.
4 I Turn the zoom lever toward • Up to nine images can be viewed at once in index playback. • Use the i. V, • or • button to change the image selection, -Selected Image Switch the display nine images at a time If you tum the zoom lever towards during index playback, the jump bar appears and you can switch between the sets of nine images.
When you have many images recorded onto a memory card, it is handy to use the four search keys below to jump over images to find the object of your search. Jump 10 Images Jumps over 10 images at a time. [] Jump 100 Images Jumps over 100 images at a time.
I Movie Control Speaker volume (Adjust with the • or • button) 2 Select _ (Play) and press the SET button. • The movie will pause if you press the SET button during playback. It will resume when you press the button again. • When playback ends, the movie stops at the last frame displayed.
r[tr i F rtF You can delete portions of recorded movies. 1 Select [] (Edit) in the movie Movie Editing Panel control panel and press the SET button. • The movie editing panel and the movie editing bar will display.
4 Select [New File] or [Overwrite] and press the SET button. • [New File] saves the edited movie under a new file name. The pre-edit data is left unchanged. Note, if you press the SET button while saving the movie, saving is canceled. • [Overwrite] saves the edited movie with its original name.
Images can be rotated clockwise 90 ° or 270 ° in the display. Original 90 ° 270 ° 1 [] (Play) Menu _ _. See Menus and Settings (p. 27) 2 Use the < or 1_ button to select an image to rotate and press the SET button to rotate it. • Cycle through the 90 ° 4270 ° --,original orientations with each press of the SET button.
You can apply such effects as fade in, and then play back your movies. [] pay back He movie without applying effects. Allows you to apply a fade (fade-in) while b'ansitlening between scenes.
You can add effects to recorded images (stills only) using the My Colors function. The following selection of My Colors effects is available. For details, see p. 80. _J Vivid m Lighter Skin Tone Neutral _J Darker Skin Tone Sepia _ Vivid Blue B/W _ Vivid Green _I Positive Film _ Vivid Red 1 [] (Play) Menu @_.
4 Select [OK], and press the SET button. • The newly saved image transformed with the My Colors effect will be the last one in the list. • To continue adding effects to other images, repeat the procedures from Step 2 onward. ;gl Press the MENU button and select [Yes] or [No], then press the SET button.
_;1_ |,1_. [_ a i i [_ !.."[,] ! i i [, i LVA [=.] ii [,]..'1i tTSl Iii T-:. [_ [=-] In Playback mode (including single image playback, index playback, magnified playback and the review immediately after shooting in Shooting mode) you can attach sound memos (up to 1 minute) to an image.
i You can record sound (stereo) only, without images, for up to two hours at one time. 1 [] (Play) Menu "_L_. See Menus and Settings (p. 27) 2 Use the • or 1_ button to select rl (Record) from the Sound Control Panel and press the SET button. • The recording starts and the elapsed time is displayed.
Sound Playback 1 [] (Play) Menu _U. See Menus and Settings (p. 27) 2 Use the • or • button to Recording select a sound and select [] Shooting Time Length with the • or I_ button, and press the SET button. The sound plays. II (Exit): Returns to the Play menu.
For details on the sound number and folder number, refer to the Software Starter Guide. The images on a memory card can be displayed automatically. * Slide show image settings are based on DPOF standards (p, 111 ), Types of Slide Shows [] All Images Plays all images on the memory card in order.
[Start] _ SET button. • The following can be performed during automated playback. - Pause/resume the slide show: Press the SET button - Move on to next/go back to previous: Press the • or • butt.
Select the date/folder to play images from (1_, r"l) 1 Select [] or [] _, SET button. 2 Use the < or 1_ button to select the date or folder to play images from _ MENU button.
Select images for the Slide Show (SE to _]) Select onty the images that you wish to play back and save them as a slide show (Custom 1,2 or 3). Up to 998 images can be selected. They will be played back in their order of selection. 1 Select [] to [] _ SET button.
Adjusting the Play Time and Repeat Settings • Play Time Sets the duration that each image displays. Choose between 3*- 10 seconds, 15 seconds and 30 seconds.
2 Select an image you want to protect using the • or 1_ button. • Pressing the SET button again cancels the setting. oYou can also protect images in the index playback mode. Protection Icon I_j I'_'III i'T_j::-].--1 1 [] (Play) Menu _ [].
I Print Settings/Transfer Settings You can select images on a memory card for printing and specify the number of print copies in advance using the camera.
- _ (Index) Select an image and press the SET button to select or desetect it. eYou can also select images in the index playback mode. • If the camera is connected to a printer, the r_'v button lights blue during image selection. Printing starts after pressing the SET button once the _N button is pressed and [Print] selection is confirmed.
Setting the Print Style Specify the print style before selecting the image to print. The following print settings can be selected. * Default setting [] Standard* Prints one image per page. Print Type [] Index anPrintSindextheformat.Selected images together at a reduced size in [][] Both Prints the images in both the standard and index formats.
o The Date and File No. settings will change according to the Print Type as follows. However, the printable information may vary between printers. - Index [Date] and [File No.] cannot be set to [On] at the same time. -Standard or Both [Date] and [File No.
Single Images 2 [Order] _ SET button. • Selecting [Reset] cancels all transfer order settings. n O Use the • or I_ button to select an image to transfer @ SET button. • Pressing the SET button again deselects the setting. OYou can also select images in the index playback mode (p.
l Shooting/Viewing Images on a TV set You can use a video-compatible television as a monitor to shoot or play back images when it is connected to the camera with the supplied Stereo/Video Cable STV-250N. 1 Turn off the camera and the TV. N u Connect the StereoNideo Cable to the camera's AN OUT terminal.
I Customizing the Camera (My Camera Settings) My Camera allows you to customize the start-up image and the startup, operation, self-timer, and shutter sounds. You can change and register these settings, enabling you to customize the camera to suit your own tastes.
1 [] mode _ [] (My Camera) Menu €' Menu Item to register. See Menus and Settings (p. 27) 2 Select [] or [] and press DISP. button. 3 Select an image or record a sound. • Start-up Image Select the image you wish to register and press the SET button.
4 Select [OK] and press the SET button. • TO cancel registering, select [Cancel]. [_] ee the supplied Software Starter Guide for more information on creating and adding to the My Camera data.
l Troubleshooting Power is not turned on, • Press the power button for a moment (Basic Guide p. 3). Memory cord slot or battery • Confirm that the memory cord slot cover or battery cover is open.
The SD memory card's write protect tab is set to "Write protect". The lithium coin battery charge is low. • When recording to, erasing fromor formatting the memory nard,slide the tab upward (p. 133). • Replace _ (p. 135). Display fl_ckers when shot under fluorescent lighting.
The symbol will display when using a memory card that had print settings or transfer settings set by other DPOF- compliant cameras. The camera automatically brightened he image displayed on the LCD monitor (or viewfinder) to make it easier to see when shooting in a dark area (p.
AF-assist Beam is set to [Oft]. The camera moves when _he shutter button is pressed. • In dark places where it is difficult for the camera to focus, he AF-assist Beam will emit to assist focusing. As the AF-assist Beam will not function when turned off, set it [On] to activate it (p.
Subject is too close, making the flash too s_'ong. • Shoot wi_in correct shooting distance of_e subject when using the internal flash (p. 147). Subject is over exposed clue to • Set the exposure compensefJon to a negative (-) the surrounding area being too setting (p.
Thememory card's performance has dropped. Memory card was formatted in another device. Memory card slot cover or battery cover was opened with power on. Interval shooting session is in progress. The mode was switched from shooting to playback mode.
The following types of memory cards are used. - Slow recording cards. - Cards formatted on a different camera or a computer. - Cards which have had images recorded and erased repeatedly, When the camera's internal memory is low, the "Buffer Warning" displays until it is full, and sheeting will automatically stop.
You may experience frame dropping when playing back a movie on a computer wi_ insufficient system resources. ,_ Images shot with this camera may not play back properly on o_er cameras.
Camera and printer are not properly connected. Printer is not turned on. Print connection mehed is incorrect. • Make sure the camera and printer are connected properly with he specified cable. Turn on he printer. Select [Auto] for [Print Method] under the [] (Set up) menu (p.
lust of Messages The following messages may appear on the LCD monitor (or viewfinder) during shooting or playback. Please refer to the Direct Print User Guide for the messages that display during a printer connection. Image is being recorded to, or read from, memory card.
You attempted to play beck an image larger than 4992 × 3328 pixels or with a large data size. You attempted to play beck an incompatible JPEG image. You attempted to play beck an image with corrupted data.
You attempted to erase or edit a protected image,movie or sound. Toomany images have been marked with print settings, _'ansfer settings, or slide shows. Cannot process any more. Could not completely save the print, transfer or slideshow settings.
l Appendix The following icon and message will display. [] I I Change the batteries ] The battery charge is low. If you plan to _ Battery charge is insufficient to operate the use the camera for an extended period I camera. Replace the battery immediately.
Be careful that you don't put the batteries into a pocket together with a metal key chain or other metallic objects, as these objects may cause batteries to short- circuit. if you do not plan to use the camera for a long time, remove the batteries from the camera and store them in a safe place.
• Memory cards are high-precision electronic devices. Do not bend them, apply force to them, or subject them to shocks or vibration. Do not attempt to disassemble or alter the memory card. Do not allow dirt, water or foreign objects to contact the terminals on the back of the card.
If the LCD monitor (or viewfinder) displays the Date/Time menu when you turn on the camera, this means that the date battery has run down and the clock has stopped running. Please purchase a replacement battery (lithium coin battery CR1220) and install it as follows.
The LCD monitor also displays the Date/Time menu the very first time you turn on the camera. This is normal, and you don't need to replace the date battery. Using Rechargeable Batteries Battery and Charger Kit CBK4-300 Included are the battery charger and four rechargeable AA-size NiMH (nickel metal hydride) batteries.
.
o It takes approximately 4 hours 40 minutes with four for the charger to fully recharge them (as determined by testing at Canon facilities). Please do not charge batteries in areas where the temperature is outside the range of 0 to 35 °C (32 to 95 °F).
Using a Compact Power Adapter Kit (Sold Separately) You should use the separately sold Compact Power Adapter CA-PS700 when using the camera for long periods of continuous use or for connecting to a computer or printer. 1 Connect the power cord to the compact power adapter first and then plug the other end into the power outlet.
When attaching the Wide Converter WC-DC58A, Tete-converter TC-DC58B, and Close-up Lens 500D (58 mm) (each sold separately) you also need the Conversion Lens Adaptor LA-DC58E (included with the separately sold Lens Adaptor/Hood Kit LAH-DC20). Wide Converter WC-DC58A Use this converter for taking wide-angle shots.
Close-up Lens 500D (58 mm) This lens makes macro shooting easy. You can take normal shots 28 to 50 cm (11 in. - 1.6 ft.) between the front of the lens and the subject with wide-angle and 35 to 50 cm (1.1 - 1.6 fL) with telephoto in macro mode. Shooting Area Distance between the front of thelens and the subject Shooting area Wide 28 cm (11.
3 Align the • mark on the conversion lens adapter with the • mark on the camera, and turn the adapter in the direction of the arrows as far as the • mark on the camera. • To remove the conversion lens adapter (lens hood or conversion lens), turn the adapter in the opposite direction with holding down the ring release button.
Converter Settings Set the camera appropriately after attaching the Wide Converter WC-DC58A or the TeIe-converter TC-DC58B (no setting is needed for the 500D Close-Up lens). 1 I_ (Rec.) Menu _ [Converter] _ [Off]*/[WC-DC58A]/ [TC-DC58B]. See Menus and Settings (p, 27) • Select the attached converter.
o efore attaching the bracket to the flash, check that the lithium battery (CR123A or DL123) is installed. • To illuminate the subjects properly, install the flash so that it is up against the side of the camera and parallel with the camera's front panel.
If the camera, lenses, viewfinder or LCD monitor become dirty, use the following cleaning methods. Never use thinners, benzine, synthetic cleansers or water to clean the camera. These substances may distort or damage the equipment. Camera Body Gently wipe dirt off the camera body with a soft cloth or eyeglass lens wiper.
__tBIT_ All data is based on Canon's standard testing methods. Subject to change without notice. PowerShot $3 IS Camera Effective Pixels Approx. 6.0 million Image Sensor 1/2.5 -inch type CCD (Total number of pixels: Approx 6.2 million) Lens 6.0 (W) - 72.
Exposure Compensation + 2.0 stops in 1 B-stop increments Auto exposure bracketing (AEB) and Safety Shift is available. ISO Speed Auto*, High ISO Auto*, ISO 80/100/200/400/800 equivalent * The camera automatically selects He optimal speed when Auto or High ISO Auto is set.
File Format Number of Recording Pixels (Still Images) (Movies) Compression Recording Pixeie (Still Images) Movie Recording Pixeie/ Frame Rate Audio Playback Modes Design rule for camera 1lie system and DPOF compliant Exif 2.
Custom Display Function Display lecagon: LCD monitor (2), viewfieder (2) Displayed information: shooting info*, grid lines*, histogram* * You can enable/disable display of thle informatlen for each of the display locations.
Battery Capacity Playback _me Number of Images Shot LCD Monitor ON (Based on the Viewfinder ON CIPA standard) Approx. Approx. 110 images 110 images Approx. Approx. 550 images 570 images AA Alkaline Batteries Approx. (included with the camera) 13 hours AA NiMH Battery Approx.
Memory Cards and Estimated Capacities Still Images [_1: Card included with the camera 16MB [] (Large) [] 2816 x2112 pixels _'M D (Medium 1) [] 2272 x 1704 pixels [] [] [] (Medium 2) [] 121 1600 x.
Movies [--I: Card included with the camera Modes Recording Pixels/ 16MB SDC-128M SDC-512MSH Frame Rate 640 x 480 pixelst 6 sec 1 rain. 4 sec 4 rain. 9 sec. [] 30 framestsec. 640 x 480 pixels/ 14 sec 2 min. 7 sec 8 min. 14 sec, [] 15 framestsec. 320 x 240 pixels/ 10 sec 1 rain.
Movies Modes [] [] Recording PixeLs Frame Rate FiLe size 640 x 480 pixels 30 framestsec. 1980 KB/sec. 640 x 480 pixels 15 frames/sac. 990 KB/sec. 320 x 240 pixels 30 frames/sac. 660 KB/sec. 320 x 240 pixels 15 framestsec. 330 KB/sec. 320 x 240 pixels 60 frames/sac.
Battery Charger CB-5AH/CB-5AHE (Sold Separately) (Included with the separately sold battery charger Kit CBK4-300) Rated Input AC 100 - 240 V (50 / 60 Hz) 16 VA (100 V) - 21 VA (240 V) Rated Output 565 mA .I, 1275 mA.2 Operaling Approx. 4 hours 40 rain.
Tele-converter TC-DC58B (Sold Separately) Magnification Approx. 1.5 Focal Length 648 mm (35ram film equivalent) Lens compos[tlen 5 elements in 3 groups Shooting Distance 2.
Lens Hood LH-DC40 (Included with the separately sold Lens Adapter/Hood Set LAH-DC20) Thread Diameter 58 mm standard filter thread Dimensions Diameter: 79,0 mm (3,1 in,) Length: 31,5 mm (1,2 in.) Weight Approx. 19 g (0.67 oz,) Close-up Lens 500D 58 mm (Sold Separately) Shooting Distance 28 - 50 cm (11 in.
I INDEX A Adjusting the Exposure Compensation ............ 75 AE Lock ................ 70 AEB Mode ............... 76 AF Frame (_[_) ........... 63 AF Lock ................. 64 AF Mode ................ 67 AF-assist Beam ........ 12, 28 Aperture Value .
L Language ................ 32 LCD Brightness ........... 31 LCD Monitor .............. 14 List of Messages ......... 129 M Magnified Images (O_) ...... 92 Manual Aperture ........... 60 Manual Focus (MF) ......... 66 Memory Card Format ..............
Smooth Continuous Shooting 42 Sound Memos (_J) ....... 102 Sound Mode ............. 50 Sound Recorder ......... 103 Speaker ................ 14 Start-up Image ........... 33 Start-up Sound ........ 31,33 Stitch Assist ............. 51 Super Macro ....
MEMO.
MEMO.
MEMO.
MEMO.
MEMO.
Trademark Acknowledgments • Macintosh, Mac OS and QuickTime are trademarks of Apple Computer Inc., registered in the United States and/or other countries. • Microsoft ® and Windows ® are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
FCC Notice (Digital Camera, Model PCl192) FOR HOME OROF_{_ USE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
I Functions Available in Each Shooting Mode The chart below is a reference for the settings available for various shooting conditions. The settings selected in each shooting mode are saved after you finish shooting. You can shoot with the settings saved in the C mode (p.
SCN __ P Tv Av M I Center Point •• • ••• • I I AF Frame p, 63 Manual .... O O O AF Lock p. 65 - 0( 2 O O O O O Manual Focus p. 66 I _ - 0(2 O O O O O MF-Poi_Zoomp,66 - _g - - AF-assist Beam p, 28 ,', Macro _ O 0( 2 O - O O O Macro Basic p, 12 Super Macro _ - O(ti - O O O O Dig_, zoom p, 4t - Sefety Shift p, 60 .
r D_ M vl (1)The following are the recording pixela and frame rates fo , • ( o "e). 640 × 480 pixels × 30 frames/sec, 640 × 480 pixels × 15 frarnes/sec, _lovie Recording Pixels/Frarne Rale 320 × 240 pixels × 60 frames/sec. 320 × 240 pixels × 30 frarnes/sec.
デバイスCanon S31Sの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Canon S31Sをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCanon S31Sの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Canon S31Sの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Canon S31Sで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Canon S31Sを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCanon S31Sの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Canon S31Sに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCanon S31Sデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。