CanonメーカーS400の使用説明書/サービス説明書
ページ先へ移動 of 164
CallOll IIII III IIIIIIIIIII CDI-E081 "Power_hot S zIO0 DiG JTAL (ELPH D|GUTAL I)(US400 CameraUser Guide D_G!G • Please read the Read This First section (p. 7). • Please refer to the Software Starter Guide for information on installing the software and downloading images.
Flowchart and Reference Guides On iiii on.
If your camera is used for prolonged periods, the camera body may become warm. Please be aware of this and take care when operating the camera for an extended period. The LCD monitor is produced with extremely high-precision manufacturing techniques. More than 99.
,,,,,,,,,,,,,,,2,,,,,l_:J_,,,,,ar_e_, n_ _ , _ ,_ _ a _,_ ?_ _ i? ¸ i_, i ,! !, ?,!_ ,/,/,/,/,!_!_, ............................... AboUt This Grade C 0 n _e n t i o n s U s e d i n t h e Te x Icons on the right end of title bars show the applicable operating modes.
Table of Contents Items marked with : are lists or charts that summarize camera functions or procedures. Please Read .......................................................................... 7 Safety Precautions ......................................
4 I Tab!e _f _entents Changing My Camera Settings ......................................... 45 Registering My Camera Settings ....................................... 46 Selecting a Shooting Mode ............................................... 49 Reviewing an Image Right after Shooting .
__ _; _ i:i!ii :_: _i: ¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸¸_b_e¸¸¸¸Qf¸¸¸¸CQ_¸_"1s¸¸¸¸¸ Jiiiii_i .
6 I Tab!e _f _Qntents Using an AC Adapter Kit (Sold Separately) .................... 141 Using a Car Battery Charger (Optional) ......................... 142 Camera Care and Maintenance ...................................... 143 Troubleshooting ......
ReadThisFirst Test Shots Before you try to photograph important subjects, we highly recommend that you shoot several trial images to confirm that the camera is operating and being operated correctly.
8 I Read This Eirst .......................................................................................................................................................................................................................................
• Do not allow the equipment to come into contact with, or become immersed in, water or other liquids. Do not allow liquids to enter the interior. The camera has not been waterproofed.
10 | Read ThisR • Avoid dropping or subjecting the batteries to severe impacts that could damage the casings. It could lead to leakage and injury. • Do not short-circuit the battery terminals with metallic objects, such as key holders. It could lead to overheating, burns and other injuries.
• Be careful not to cover the flash with your fingers when shooting. In addition, do not touch the surface of the flash after taking several pictures in rapid succession. Either action could result in burns. • Do not operate the flash with dirt, dust or other items stuck to its lens.
............................. Quick sta Section _) Charge the Battery Pack (p. 18). Place the battery pack in the battery charger and plug the charger into a power outlet. The charge indicator lights red while charging and changes to green when the battery pack is charged.
(_tFocus (p. 35). Aim the camera and lightly press (halfway) the shutter button. Two beeps will sound when the autofocus is set. OShoot (p. 36). Press the shutter button all the way. The shutter sound will sound once when the shot is complete. (_)View the Recorded Image (p.
• Optical Viewfinder Window (p. 34) [P. 36) Reduction Lamp (p. 53) ip (p. 58) _phone (p. 88) Lens • Flash (p. 53) The following cables are used to connect the camera to a computer or printer. - Computer (p. 123) USB Interface Cable IFC-300PCU(supplied with camera) - Direct Print Function Compatible Printer (CP series, sold separately) (p.
.........................................._Qmponen_ Guide I _ 5 ........... ! • Viewfinder (p. 34) Lock for the CF Card Slot Cover (p. 22) CF Card Slot Cover (p. 22) Wrist Strap Mount Attaching the Wrist Strap* --O Battery Cover (p. 20) DC Coupler Terminal Cover (p.
16 I Shooting mode dial (p. 49) , Indicators (p. 17) Power Lamp Lights when the power is on or transmission preparations arecomplete when connectedto a computer _ON/OFF Button (p. 26) I_"l_ Shutter Button (p, 35) m _ _ Zoom Lever Shooting: E_] (Telephoto)/ liii] (Wide Angle) (p.
The indicators light or blink when the ON/OFF Button or shutter button is pressed. Upper Indicator Green: Ready to shoot Blinking Green: Recording to CF card / Reading CF card/Erasing from CF card/Tra.
iiiiiiiiiiii _ _ii8¸¸iiiil ¸_|ili_i_i _ _ _ _ii¸iiiii ¸I _ _ ii_ ¸ii_!i_i ¸I_ iii i ¸i_i ¸ii_ ¸_i_i ¸ii!!_iiiiiiii!iiii!_ii ¸ii ¸iiiii_i_ ¸i ¸iiil ¸I ¸i¸i_i:_i ¸I_! !_ i_ ¸¸¸i_ _.
Handling Precautions • Keep the battery pack terminals (_C_) dean at all times. Dirty terminals may cause poor contact between the battery pack and camera. Polish the terminals with a tissue or a dry cloth before charging or using the battery pack. • Do not rapidly overturn or wave the battery charger around when it contains the battery pack.
2_Q ¸ _: |i iii i i_Pa_Jng, ,,_ _a_m_a_ { {{ { { { { _: :_ii _ii{_:# :} i?i? _i _i¢!i i ?i? _i _i¢!i i ?i? _i _i¢!i i ?i?_i _i¢!i i ?i? _i _i¢!i i ?i?_i ? :iiiiiiiiiiiiiiiiiii Install Battery Pack NB-1LH (supplied) as shown below. Battery Pack NB-1L (optional) can also be used with tile camera.
Please use an AC Adapter Kit ACK500 (sold separately) for extended use of the camera (p. 141). Battery Pack Charge The following icons and messages will display when the battery pack charge is low. Battery pack charge is low. Recharge it as soon as possible before it is required for an extended period.
iiiii _ Turn the camera power off and insert the CF card with the following -_rocedures. • Slide the lock up and open the CF card slot cover. • Insert the CF card with its label facing upward until the CF card eject button fully extends. Close the CF card slot cover.
See CF Cards and Estimated Capacities (p. 151). .... Handling Precautions for CF Cards ................................................................................................................................................ • CF cards are high-precision electronic devices.
_reparing • Use the _) or (D button to select a field (year, month, day, hour, minute and date format), and the _ or _ button to change its value. • To put the settings into effect, press the SET button after setting the date format. • Press the MENU button toredisplay the Rec.
The language in which menus and messages are displayed can be selected with this function. • Press the ON/OFF button until the power lamp lights. Power Lamp • Press the MENU button to display the Rec or Play menu. • Use the C])or G button to select the (Set up) menu.
iii ii iii ii ii ii iii ii iii 2i61;i;J i i ili ii i;;!iiiiiiil iliii ii i i iii!ii? ?i!!ii;ill ¸Ii: !il i iiii; ili;ili!!;i!;!;!;:!il;iiiiiiiiiiii;i iii!iil ii;;i;_i;;ii ii;i!i;:!iiiiiiiiiiiiiiiiiii.
!i !i!i!i !i !i!i!i !i !i!i!i !i !i!i!i !i!i!i!i !i !i!i!i !i!i!i!i !i !i!i!i !i !i!i!i !i !i!i!i !i !i!i!i !i !i!i!i !i !i!i!i !i !i!i!i !i !i!i!i !i!i!i!i !i !i!i!i !i!i!i!i !i !i!i!i !i !i!i!i !i !i!i!i !i !i!i!i !i !i!i!i !i !i!i!i !i !i!i!i !i !i!i!i :; @JJJJJJJJJi_i i;¸ i; _ Basi_ _un_tiQn& ! 2_ .
28 I Basic Function .......................................................................................... _ ....................................................... _ .............................................. • To Shoot Still Images (Shooting Mode) Slide tile mode switctl to _.
The LCD monitor can be used to compose images while shooting, adjust settings menus and replay images. The image in the LCD monitor will darken in strong sunlight or bright light.
iiiii Replay Mode (i-_-Ion the mode switch) • The LCD monitor will turn on when the mode switch is set to the F_I position. • In replay mode, pressing the DI$B button cycles the information view mode each time the button is pressed. Single Image Replay (p.
unctions 131 Information Displayed on the LCD Monitor Shooting Mode When a shooting setting is changed, information about the settings displays on the LCD monitor for approximately 6 seconds even if the LCD monitor is set to Off or to the No Display mode.
Spot AE Point Frame (_M mode) /I AF Frame (p. 68) Recordable Images or RecordaMe Movie Time (sec.) In movie mode, only the resolution shows (not compression).
Replay Mode (Detailed Display) In detailed display mode, the following supplementary information is displayed. Long Shutter Mode p.71 Shooting Mode p. 49 Exposure Compensation p. 70 White Balance p. 73 Photo Effects p.76 ISO Speed p.77 Flash p.53 Macro/Infinity p.
iiiii The optical viewfinder can be used to conserve power by setting the LCD monitor to Off (p. 29) while shooting. t I Viewfinder Shows the center of the image • About the Autofocus Function This .
The shutter button features a two-stage action. Pressing Halfway Pressing halfway automaticaNy setsthe exposure,focus and white balance. Indicator • Indicator Status Upper Indicator - Green: Meterin.
.......... _6 | Basic E_nctiQ._ Pressing Fully Pressing the shutter button down fully activates the shutter and causes one shutter sound to sound. While the image is being recorded to the CF card, the indicator blinks green. Shots cannot be taken while the flash is charging.
Basic Eunctians I _ ......................... The zoom can be adjusted from 36 mm to 108 mm in 35 mm film equivalent terms. Telephoto/Wide Angle • Pressthe zoom lever toward I-_3to zoom in (telephoto). • Pressthe zoom lever toward _ to zoom out (wide angle).
iiiii Menus are used to adjust shooting and replay settings, as well as other camera settings like the Date/Time and sounds. Menus are displayed by pressing the MENU or FUNd, button according to the circumstances. Use the LCD monitor to perform the following procedures.
IFI IBI IBI Mode Switch Set to _ Mode Switch Set to I_q *The menu will appear slightly different when the shooting mode dial is set to _[i, Eg_ or _. Use the _ or (_ buttons to select the Rec./Play, Set up, or My Camera menu. Use the _ or _ buttons to select a menu item.
FUNC. -,© MENU © The menu will appear slightly different when the shooting mode dial is set to _, g;_ or _,, ;i i i i % The menu will appear slightly different when the shooting mode dial is set to l_, d;_ or _. iiiiiiiiiii_i !_i MENU _ *------ See Selecting Images for Printing (p.
© MENU ©.
This chart shows the options and defauJt settings for each menu. Items Set with the FUNC, Button Menu Item Exposure Compensation Long Shutter White Balance ISO Speed Photo Effect Compression (Still im.
Play Menu (Blue) [] Set u p Menu (Yellow) Menu Item _1 Protect _ Rotate 0 %und Memo Erase all Slide Show Print Order Transfer Order Beep LCDBrightness _{_ Auto PowerDown ot_':_ Dale / Time Format.
.................... _44_l_Basj_iFun_J_Qns Menu Item Available Settings _eferenc_ Page @ Theme 13!1/ H*/ I_1/ [] p4s O Start-up Image []/H*/_,_/[] p 45 [] @ Start-up%und r_/Sl_,/[]/[] p45 Operation %und _'_/m_*/[]/_1 p45 Menu _ SelftimerSound _2_/_*/[]/[] p45 (Blue) @ ShutterBound []/_*/[]/[] p45 * Default setting.
Customizing the Camera (My Camera Settings) My Camera aNows you to customize the start-up image and start-up, shutter, operation and self-timer sounds. Each menu item has three choices. Example: Start-up Image [] [] [] The [] option features science fiction related images and sounds.
46 I Images recorded onto the CF card and newly recorded sounds can be added as My Camera settings to the [] and [] menu items. You can also use the supplied software to upload your computer's images and sounds to the camera. Registering CF Card Images and Sounds lect an item in the y Camera menu.
_47 Start-up Image • Use the _ or O button to select the image you wish to register. Start-up, Operation, Self-timer, and Shutter Sounds • Use the _ or G buttons to select rl and press the SET button. Recording will start and automatically stop when the time is exceeded.
g the Camera (My Camera Settings File Format of My Camera Settings My Camera settings should conform to the below file formats. However, CF card images shot with this camera can be registered as My Camera settings regardless of the below formats.
The camera features the following shooting modes. Most settings are automatically selected by Auto the camera. The exposure compensation, white balance _M Manual and other settings can be manuallyselected. Imagesare shot in overlapping series to Stitch Assist create single panoramic images.
_hootJ Right after a shot is taken, the image appears in the LCD monitor for 2 seconds even ifyou release the shutter button regardless of whether the LCD monitor is on or off. You can also review itwith the following procedures. • By keeping the shutter button pressed after a shot.
............................................. Shoating I _ You can change the resolution and compression (excluding movies) settings to suit the purpose of the image you are about to shoot.
I ShQQ*ing FUNC, • Use the 9 or d_b button to select I!1. or _FI*, *The current setting is displayed. • Use the D or _ buttons to select a compression or resolution option. Compression (Excluding Movies) Select !_1, [] or rl. Resolution (Still Images) Select II11, I_1, [] or I_.
[] Auto Theflashfires automatically as required by the light level. Red-Eye The red-eyereduction lamp fires with each shot, [] Reduction automaticallyadjusting the intensity to suit lighting Auto levels. [] FlashOn Theflashfires with everyshot. [] FlashOff Theflashwill not fire.
54 I Sh_t!.g ..................................................................................................................................... ..................................... _1 • When you use flash photography at higher ISO speeds, the chances of white streaks appearing in the image increase the closer you approach to the subject.
............................................... Sh_oti.g I _ ............. llllllllllllllllllllllllllllllllllllllllll_ll;!;!;!_i_%i!_ii_i!_Ii_!_!_!_i%i_i .............. ,,,_ ............................................................. _..............
B6 1 ShQQting .............................................................................................................................................................................................................................................
In this mode, the camera shoots continuously while the shutter button is held down. Recording ceases when tile shutter button is released. Standard Continuous [] Shooting [] High-Speed Continuous Shooting E! In the _ (Rec.) menu, select 0. Use this mode to view images as you shoot continuously.
_8 I ShQatjng • Display [] or [t_J. • When the shutter button is pressed, the self-timer will activate and the self-timer lamp will blink. Changing the Self-timer Countdown Time • See Selec?ing Menus and Settings (p. 38). ii_t he (Rec.) menu, select _.
Stitch Assist mode can be used to shoot overlapping images that can later be merged (stitched) tocreate one panoramic image on a computer. The overlapping seams of several adjacent images can be ained into a single panoramic image. To merge the images on a computer, use PhotoStitch, one of the supplied programs.
6Q :1 ShQQting • Do not try to stitch images that include both distant and close items. These items may appear warped or doubled up in the merged image. • Make the brightness in each image consistent. The final image will appear unnatural if the contrast in brightness is too great.
• Compose the second image so that it overlaps a portion of the first and shoot. Secondlmage Third Image • Use the _ or (D button to check or retake the recorded images. • Minor discrepancies in the overlapping portions can be corrected when the images are stitched together.
62 1 ShQ_lJ.g ........................ Select the [] (320 x 240, default) resolution or [] (160 x 120) resolution (p. 51). Pressthe shutter button fully to start recording images and sounds. During shooting the recording time (in seconds) and a red circle appear on the LCD monitor.
• You are recommended to use a CF card that has been formatted in your camera toshoot movies (p. 97). The card supplied with the camera may be used without further formatting.
64 I ShQQting It may be difficult to focus on the following types of subjects. Use the focus lock in these situations. • Subjects with extremely low contrast to the surroundings • Subjects with ex.
_65 • Re-aim the camera to compose the shot as desired and press the shutter button all the way. • Release the focus lock by pressing the ,_ / _1, button. shutter button to recompose the image. Moreover, the focus remains locked after the picture is taken, allowing you to capture a second image with the same focus.
i!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ! ! !! !! !! ! ! ! !! !! ! ! !! !! !i! i!i iii iii ii iiiiii iiii iii ii iiiii iiii iiii ii! ¸I¸i ii ¸I ¸i ¸i ¸i¸i ¸i ¸i ¸i ¸i ¸i ¸i ¸.
You can lock the flash exposure so that the exposure settings are correctly set for a particular portion of your subject. • Turn on the LCD monitor. • Set the flash to [] and focus on the part of the subject on which you wish to lock the flash exposure setting.
68 I ShQQting ..................................... ............................................ Although the autofocus function is preset to the AiAF setting (nine AF frames), you can set it to the center AF frame. When the center AF frame is selected, the AF frame wil{ appear in the LCD monitor if it is turned on (p.
You can switch between metering modes toshoot. Appropriate for standard shooting conditions, including backlit scenes. The camera divides images Evaluative into several zones for light metering.
iiiii_ Adjust the exposure compensation setting to avoid making the subject too dark when it is backlit or shot against a bright background or to avoid making lights appear too bright in night shots. • Use the Q or d_ button toselect _il*. * The current setting is displayed.
........................................................................................................................................................................................................................... ShoQtng I _ You can set the shutter speed to a slow setting to make dark subjects appear brighter.
_2 I ShQQting • Use the _ or (D button to select a shutter speed. The higher the value, the brighter the image and the lower the value, the darker the image. • You can shoot right after selecting a value. The menu displays again after the shot, allowing you to change the settings easily.
When the white balance mode is set to match the light source, tile camera reproduces colors more accurately. Auto The camera sets the white balance automatically according to shooting conditions. [] Daylight For recording outdoors on a bright day. [] Cloudy For recording under overcast, shady or twilight skies.
74 I ShQQting This setting cannot be adjusted when the [] (Sepia) or [] (BNV) photo effects are selected. [] Setting a Custom White Balance You can set a custom white balance to obtain the optimal set.
.................................................................... Shooting 175 • Aim the camera so that a piece of white paper, a cloth or a gray card completely fills the frame at the center of the LCD monitor or the entire optical viewfinder, then press the SET button.
76 1 ShQQting .......................................................................................................... ................................................................ ha n g in g th P h ot E fie ct You carl shoot with different photo effects.
Raise the ISO speed when you wish toreduce camera shake or turn the flash off when shooting in a dark area, or use a fast shutter speed. • Use the _ or d3 button to select []*. * The current setting is displayed. • Use the D or 0 buttons to select a speed.
iiiii _ Your camera is equipped with an InteJJigent Orientation sensor that detects the orientation ofan image shot with the camera on end and automaticaJ[y rotates itto the correct viewing orientation in the dispJay. You can set this function on/off.
You can select the way file numbers are assigned. The file number is reset to the start (100-0001) each time a new CF On card is inserted. New images recorded on CF cards with existing files are assigned the next available number.
............................ RePlaying • Turn the mode switch to the F_I position. • The last recorded image will appear in the display (single image replay). • Use the C])button to move to the previous image and the _) button to move to the next.
• Images can be magnified up to approximately 10 times. Approximate Location of the Magnified Area • Use the @ / d_b / _ / (D buttons to move around the image. • Hold the SET button down and press the zoom lever toward O, to cycle through each setting, from approxi- mately 2.
iiiii " • Up tonine images can be viewed at once in index replay. Seleded Image Movie • Use the _ /db / (]) / G buttons to change the image selection. • Pressthe zoom lever toward O, to display the selected image in single image replay. Switching between Sets of Nine Images • Successive sets of nine images can be shown in the display.
I Movie clips can be replayed with the following procedures. i, i Movies cannot be played in the index replay mode. • Use the C])or (D button to select a movie. • Images with a _r_il_. icon are movies. • The movie control panel will display. • Use the @ or @ button to select [] (Play).
iiiii Pausing and Resuming Play • Pressthe SET button to pause the movie. Press it again to resume. Fast Forwarding/Rewinding • Use tile _ or _) button to select one of the following.
Selecting [] (Edit) in the movie control panel enables you to cut unwant portions at the start or end of a movie clip. _1 Protected movies and movies less than 1 second in duration cannot be edited.
86 I • Use the (_ or G button to select [New File] or [Overwrite]. - [New File] saves the edited movie under a new file name. The pre-edit data is left unchanged. - [Overwrite] saves the edited movie with its original file name. The pre- edit data is lost.
Images can be rotated clockwise 90 °or 270 ° in the display. 0°(Original) 90 ° 270 ° I_the [] (Play) menu, select @. • See Selecting MenusandSettings (p. 38). • Use the _) or _ button to select the image to be rotated. • Cycle through the 90°/270°/0 ° orientations with each press of the SET button.
88 I In replay mode (including single replay, index replay, and magnifying replay), you can attach sound memos (up to 60 seconds) to an image. the sound data is saved in WAVE format. I_the • See Selecting MenusandSettings (p. 38). [] (Play) menu, select 0.
• Playing/Erasing Sound Memos rwDiSplay , Images with sound memos attached an image ith a sound memo have a [] symbol displayed on them in attached (p. 80). the LCD monitor. • The sound memo control panel will display. • Use tile _) or @ buttons to select [] (Play) or _ (Erase).
9Q I Rep _¥i_g Starting a Slide Show A selection of images or all the images on a CF card carl be displayed one-by-one in an automated slide show. Slide show image settings are based on DPOF standards (p. 111). All Images Plays all images on the CF card in order.
R .,lolayin_| 91 Pausing / Resuming a Slide Show • Pressthe SET button to pause the slide show. Press the SET button again to restart it. Fast Forwarding/Rewinding a Slide Show [] • Use the (_ or 0 button to display the previous or next, age, ,o,d down tho button to advanco through tho images more rapidly.
_2 I Rep_¥i.g • A white checkmark will appear beside a show already containing images. Use the _ or (D button to move between images and the qP or G button to select or deselect them. Selected images display a number corresponding to their selection order and a white checkmark _.
Adjusting the Play Time and Repeat Settings You can change the playtime for all the images in a show and havethe show repeat continuously. [] Play Time Sets the duration that each image displays.Choose between 3-10 seconds, 15 seconds, 30 seconds and Manual.
_4 I Rep _¥i_g ............................................................................................. You can protect important images from acddenta[ erasure. I_the • See Selecting MenusandSettings (p. 38). [] (Play) menu, select _. • Use the _) or G button to select an image to protect.
• Please note that erased images cannot be recovered. Exercise adequate caution before erasing a file. • Protected images cannot be erased with this function. • Use the _ or (D button to select an image for deletion. • Use the _ or (_ button to select [Erase].
9_6 _liiiii_silng_ k 1111f ¸ f_ _2 __ _2 _ _ _2 __ _2 _ _ _2 _ _ _2 __ _2 _ _ _I • Please note that erased images cannot be recovered. Exercise adequate caution before erasing a file. • Protected images cannot be erased with this function. I_n the See Selecting MenusandSettings (p.
New CF cards must be formatted with the following procedures before use. Please note that formatting (initializing) a CF card erases all data, including protected images and other file types. InCh / • See Selerting Menus and Settings (p. 38). e [] (Set up) menu, ] select @.
...................... printing This camera supports direct printing. By connecting the camera to an optional direct print compatible printer (CP series, sold separately) *_ or Bubble Jet printer (sol.
Please refer to the System Map supplied with your camera for direct print function compatible printer (CP series) information. ® Setting the Number of Print Copies (p+ 107) Y ® Setting the Print Sty.
IQO IP_ n_ng Print Menu Settings Use ttle Print menu to set print related settings. The following diagrams illustrate how to use the Print menu. Direct Print Function Set the Mode Switch to I_q SET DP.
MENU Turn the menu On/Off, C_)_(_ Selects items and settings, SET (_ Sets items and settings, F L Style -- t_ mage (p. 107) Paper (p. 107) Borders (p. 107) Date (p. 107) Number of Copies (p. 107) Trimming (p. 109) Order --Number of Copies (p. 111) Set up -- E rint Type (p.
iiiii You can make clear prints swiftly and easily when you connect the camera toa direct print function compatible printer (CP series, sold separately) or a direct print function compatible Bubble Jet printer (sold separately). You can also print using DPOF print settings.
ring 1103 _ _.__ • Attach tile direct interface cable to the printer. 1#_ • Open the camera's terminal cover and Direct Interface Cable (DIF-100) insert the cable's connector into the camera's DIGITAL terminal. Orient the cable so that the connector's ,_ symbol faces the camera's back panel.
104 I P_._.g To the BJ Printer • Turn the Bubble Jet printer's power on after you have connected the power interface Cable cord to the Bubble Jet printer and inserted the other end in a power outlet. Attach the interface cable to the Bubble Jet printer.
The following illustrations show examples from a direct print compatible printer (CP series), Options for the Style category will differ slightly for Bubble Jet printers, Print images displayed in single image replay or index replay mode. • Use the _ or (D button to select the images you wish toprint.
1Q6 IP_._.g ...............................................................................................................................................................................................................................................
Setting the Number of Print Copies • Use the _ or _ button to select [Copies] and the (]) or _ button to select the number. Up to 99 copies may be specified. Setting the Print Style You can select from among the following print styles. Direct Print Function Compatible Printer (CP Series) _.
print style selection • Use the _ or G button to select [Style]. • Use the _ or d_b button to select [], I_, _, or _ and the _ or _ button to select an option. (Image Settings) Direct Print Function Compatible Printer (CP Series) Select [Standard] or [Multiple].
The date settings are overridden by the DPOF print settings if you are using them toprint (p. 114). Setting the Printing Area (Trimming) You can print a portion of an image. The shape of the trimming frame is determined by the print style selection (image, paper, borders, date).
Trimming Frame Changing the Size of the Trimming Frame • Pressthe zoom lever toward O. or []. • The trimming frame can be resized to approximately half the image size at minimum and practically as large as the image at maximum.
You can select images on a CF card for printing and specify the number ofprint copies in advance using the camera. This is extremely convenient for sending the images to a photo developing service or for printing on a direct print compatible printer (CP series) or a direct print compatible Bubble Jet printer.
Single Images • As shown below, selection methods differ according to the options chosenfor the _ (PrintType) settings (p. 107). i (Standard)I[] [] (Both) • Use the _ or (D button to select an image and the _ or O button to select the number of print copies (up to maximum of 99).
All the Images on a CF Card • Switch to index replay (3 images), • Use the _ or O button to select [Mark all]. • Selecting [Mark all] selects all of the card's images. Pressthe SET button to set the number of print copies to 1 for each image.
114 I P_._.g ..................................................................................................................................... shooting date. • A maximum of 998 images can be selected per CF card. • When [Both] is selected, the number of print copies can be set, but it applies to Standard prints only.
1115 • Use the _ or G button to select _, [] or H, and the _ or (D button to select an option. @ (Print Type) • Select[Standard],[Index]or [Both]. [] (Date) • Select [On] or [Off]. [] (File No.) • Select [On] or [Off]. • Press the MENU button repeatedly until the replay screen reappears to complete the procedure.
116 1 Resetting the Print Settings The print settings carl all be removed at once. The print type resets to Standard and the Date and File No. options to Off. r_play • See Print Menu Setdngs (p. 100). the Print Order Menu. • Use the (]) or (_ button to select [Reset].
Printing I_ 17 Printing with DPOF Print Settings The DPOF print settings can be used to print on a direct print function compatible printer (CP series) or a direct print function compatible Bubble Jet printer. play the Print Order Menu. • See Print Menu Settings (p.
iiiii _1 • Toinclude the date in the prints,set the Date setting in the Set up menu in Step 1 aboveto [On]. You cannot set the date to print with the Style menu in Step 2 above.Please note however, that the date will not print if the print type isset to Indexeven if it is tumed On in Step 1.
You can use the camera tospecify settings for images that you wish to send by emaik Please use the software supplied with the camera to actually transfer the images to an email program. Please read the Software Starter Guide for image transfer instructions.
! I m ag_::Tran_mi_J_n Set,in gs (DP _ransfer Order) • Use the _) or (D button to move to an image and the _ or d_ button to select or deselect it. A checkmark displays on selected images. Selected for Transfer • You can use the same procedures to select images in index replay (3 images).
Shooting / Replaying with a iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii You can use a video-compatible television as a monitor to shoot or replay images when it is connected to the camera with the supplied AV Cable AVC-DC 100. You must shut the TV and camera power off before you attach or detach the AV cable.
Download images taken with the camera toa computer in one of the following ways: • Connect the camera toa computer with the USB cable You can then download images directly from the camera to a computer. • Directly from the CF card Using a [aptop computer or a card reader, you can download images directly from the CF card.
E! Connect the supplied USB interface cable to the computer's USB port and the camera's DIGITAL terminal. DIGITAL Terminal _U_ USB Cable ll) Slip a fingernail under the upper edge of the terminal cover to open it. I_Insert the connector until itclicks.
Down Downloading Images without Installing the Software (Windows XP and Mac OS X (v10.1/10.2) only) If you are using the Windows XP or Mac OS X (v10.1/10.2), you can use the software distributed with these operating systems to download images (JPEG format only) without installing the software bundled on the Canon Digital Camera Solution Disk.
Images can be loaded directly from a CF card ifyou have a slot-equipped notebook computer, a PC card reader or a CF card reader. _I Eject the CF card from the camera and insert it into a CF card reader connected to the computer.
!!! !!!i_ii:216_l _iii_,,,_:_i_:_%ii_ _R ' _;_ _i_ _i_ili_i_iii_ili_i_;_iii_i:i;_;!_:_i_ii;i_ _gi_ :_i Jig !_i_;:_ii_i _i:_i ? _ _i_ _ _;ig:; _a _ _ _:i_g _ _i!_?;_:_i:;_%E: :::RI_:%_ LiS " Of Menu Options" and Messages The following charts list the various menu contents.
Reference Item/Menu Screen Options Page Compression Sets the relative compression ratio used for images. • [] Superfine • _FI Fine* p. 51 • [] Normal Setsthe number of pixels used for images. • 11 (Large)* 2272 x 1704 pixe]s • _ (Medium I) 1600 x 1200 pixels • l'!_ (Medium 2) 1024 x 768 pixe]s p.
Item/Menu Screen Self-timer * Default setting Referen(e Options Page AF-assist Beam Digital Zoom Review Long Shutter Setsthe duration before the self-timer delay. • [_J 10 seconds* • _ 2 seconds Setsthe AF-assistBeam to on or off. • On* • Off Setswhether or not the optical zoom is supplemented by digital processing.
Item/Menu Screen Protect Rotate Sound Memo Erase all Slide Show Options Protects images from accidental erasure. Rotates images clockwise90 ° or 270 ° in the display. Adds _und memos to images. Deletes all images from a CFcard (exceptfor 3roteded images).
LAst of Reference Item/Menu Screen Options Page Print Order Selecls images and the number of print copies for output to a DPOF - compatible printer or a photo developing service. p. 111 Selects the images that will be transferred to your email software.
Item/Menu Screen Auto Power Down Date/Time Format Shutter Volume Playback Vol. Options Setswhether or not the camera automatically powers down after a set period of time elapses without something being pressed. • On* • Off Setsthe date and time and the date format.
Item/Menu Screen Start-up VoL Operation Vol. Selftimer Vol, File No, Reset Auto Rotate Options Adjusts the volume of the start-up sound when the camera power is turned on. • =DDDD Off • _mFJD 3 • _DDDD 1 • _mlD 4 • _mDD_J 2* • _mmmm 5 Adjusts the volume of the operation sound.
Reference Item/Menu Screen Page Language Video System Options Sets the language used in menus and messages on the LCD monitor. • English* • Italiano • Deutsch • Norsk • FranDJs • Svenska .
LAst of Item/Menu Screen Start-up Image _art-upSound Operation Sound Selftimer Sound ShutterSound Options Setsthe image displayed when the camera lower is turned on • l_off .131 .BI Setsthe sound emitted when the _amera )ower is turned on .1 • l_off "H* .
............ Lis_ Qf Menu Options and Messages I 135 How the Beep in the [] (Set up) Menu and Sounds in the [] (My Camera) Menu Interact To turn off each sound, such as the start-up sound, shutter sou.
136 IList of Menu Options and Message You can reset the menu and button settings to the default settings in one operation except for the Date/Time, Language and Video System settings. • Pressthe ON/OFF button until the green power lamp lights. • Set the mode switch to any position.
The following messages may appear on the LCD monitor while shooting or replaying. Busy... Image is being recorded to, or read from, CF card No memory card You attempted to shoot or replay images without a CF card instaNed. Cannot record! You attempted to shoot an image without a CF card installed.
LAst of Corrupted Data You attempted to replay an image with corrupted data. RAW You attempted to replay an image recorded in the RAW format. Unidentified Image You attempted to replay an image that was recorded in a special format (proprietary format used by the camera of another manufacturer, etc.
139 List ofMessages Displayed while a Direct Print Function Compatible Printer (CP series) is Connected The foNowing messages may appear on the camera's LCD monitor while a direct print function compatible printer (sold separately) is connected. No Paper Paper cassette is empty or incorrectly instaNed.
! 4_ I L i e{ M enw QPtions and::Me_sages ................................................................ ............................................
It is best to power the camera with AC Adapter Kit ACK500 (sold separately) when you are using itfor long periods of time or connect- ing ittoa computer.
iiiiii Car Battery Charger CBC-NB1 (sold separately) can be used tocharge battery packs from an automobile's cigarette lighter socket. Always ensure that the automobile's engine is running when you use the car battery chargen Use ofit with the engine off may flatten the battery in some automobiles.
Use the following procedures toclean the camera body, lens, viewfinder and LCD monitor. Never use thinners, benzene, synthetic cleansers or water to clean the camera. These substances may distort or damage the equipment. Camera Body Gently wipe dirt off the camera body with a soft cloth or eyeglass lens wiper.
144 I AppendiCes ........................................................................................... Problem Camera will not operate Camera will not record Cause Poweris not turned on Solution • Press the ON/OFFbutton for a moment.
Problem Lens will not retract Battery pack consumed quickly Battery pack will not charge Image is blurred or out of focus Cause Battery cover or CF card slot cover was opened with power on Battery cov.
146 I Appendice Problem Image is blurred or out of focus Subject in recorded image is too dark Subject in recorded image is too bright Cause AF-assistBeam is set to off Subject is out of focal range The subject is hard to focus on Solution • Set the AF-assist Beam to on (p.
147 Problem Cause Solution A red band Subject is too • This isa normal occurrence in appears on the bright devices containing CCDs and LCDmonitor does not constitute a malfunction. (This red bar of light will not be recorded when shooting still photos, but it will be recorded when shooting movies.
...................... Specifications All data is based on Canon% standard testing methods. Subject to change without notice. CameraEffective Pixels: Approx. 4 million Image Sensor: 1/1.8 in. CCD (Totalnumber of pixels: approx. 4.1 million) Lens: 7.4 (W) - 22.
Flash Shooting Range: Shooting Modes: Continuous Shooting: Self-timer: PC Connected Shooting: Recording Media: File Format: Image Recording Format Compression: Number of Recording Pixels: Replay Modes: Display Languages: My Camera Settings (Customizing) : Normal mode: 46 cm-3.
iiiii _ Interface: USB (mini-B, PTP [Picture Transfer Protocol]), Audio/Video output (NTSC or PAL selectable, Monaural audio) Power Source: Rechargeable Lithium-ion battery (type: NB-1LH/NB-1L) AC Adapter Kit ACK500 Car Battery Charger CBC-NB1 Operating Temperatures: 0 °- 40 ° C (320-1040 F) Operating Humidity: 10%-90% Dimensions (w x h x d): 87.
[] [] (2272 x 1704 pixe]s) [] [] [] [](1600x 1200 pixels) [] [] FC-16M FC-32M FC-64M FC-128M FC-256MH 7 14 30 61 123 13 27 54 110 222 26 54 110 220 443 14 30 61 122 246 26 54 109 219 440 52 108 217 43.
_pecifica_jon Card Slot Type: Type I Dimensions: 36.4 x 42.8 x 3.3 mm (1.4 x 1.7 x 0.1 in.) Weight: Approx. 10 g (0.4 oz.) Type: Rechargeabie Lithium Ion Cell Nominal Voltage: 3.7 V Typical Capacity: 840 mAh Cycle Life: Approx. 300 times Operating Temperatures: 0-40 °C (32-104 °F) Dimensions: 32.
Rated Input: Rated Output: Charging Time: Operating Temperatures: Dimensions: Weight: DC 12-24 V, 4.3 W 4.2 V DC, 0.55 A Approx. 130 minutes* 0-40°C (32-104°F) 90.
ii i i i i i_iilS_ i i ii ii| _ _ii i _!,,iii)ii _ _)iiili_i? iiJ iiliii _!iii_il _ iii!i_ i ii_iiiiiiii iii_i_i_ili ¸I i_i __% %!i i iii%ili%% %iii%_ii il i iii i ii ¸ill¸ i ii i_ _i il i iii i ii.
Language 25 LCD Monitor Information Displayed 31 Using the LCD Monitor 29 Macro Mode 55 Magnifying 81 Manual Mode 49 Menu Play 129 Rec. 127 Setup 130 Messages List of Messages 137 List of Messages Dis.
156 | Trademark Acknowledgments • Canon, PowerShot and Bubble Jet are trademarks of Canon, inc. • CorrlpactFlash is a trademark of BanDisk Corporation. • iBook and iMac are trademarks dApple Computer, Inc. • Macintosh, PowerBook, PowerMacintosh and Quick Time are trademarks of Apple Computer, Inc.
lllllllllllllllllllllllllllllllllllllliliiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiliiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii! ¸!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! ...........................
MEMO.
.
s 1;;6_Q_ i| i iiii iiiii iii ii iiii ii ii iiii ii ii iii iii ii ii iiii ii iiiiiiiiiii iiiiiii iiii iiii iiii iiii iiiii iii iiii iiii iiii iiii iiiiiiii i iii iiii iiiii!i ¸iiiRiiliiii ¸i! !!!! !.
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii.
CaflOfl CDI-E081-010 XX01XXX,X © 2003 CANON INC. PRINTED IN JAPAN.
デバイスCanon S400の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Canon S400をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはCanon S400の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Canon S400の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Canon S400で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Canon S400を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はCanon S400の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Canon S400に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちCanon S400デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。