AEGメーカー66000Iの使用説明書/サービス説明書
ページ先へ移動 of 28
SANT O U 66000i Built-In Refriger ator Oper ating and Installation Instructions.
Dear customer , Before placing your new r efrigerator/fr eezer into operation please r ead these operating instructions car efully . They contain important information for safe use, for installation and for care of the appliance. Please keep these operating instructions for futur e refer ence.
3 Contents Important Safety Instruction s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Dis posal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Appliance P ackaging Information .
4 Important Safety Instructions These warnings ar e provided in the inter ests of your s afety . Ensur e you fully understand them befor e installing or u sing the appliance. Y our safety i s of paramount importance. If you ar e unsure about the meaning of these warnings contact the Cu stomer Care Department for assi stance.
5 Safety of children • P ackaging (e.g. wraps, polystyr ene) can be dangerous for childr en. There is a risk of suffocation! K eep packaging material away from children! • Please make old appliances unusable prior to disposal. Pull out the mains plug, cut off the mains cable, break or r emove spring or bolt catches, if fitted.
6 Disposal Appliance P ackaging Information All materials are envir onmentally friendly . They can be dumped or burned at an incinerating plant without danger . About the materials: The plastics can be recycled and ar e identified as follows: >PE< for polyethylene, e.
7 Y ou can remove any r emnants of adhesive using white spirit. Remove all adhesive tape and packing pieces from the interior of the appliance. Installation Installation Location The appliance should be set up in a well ventilated, dry room. Energy use is affected by the ambient temper ature.
8 Grid pr eparation The side at which the door opens can be changed from the right side (as supplied) to the left side, if the installation site requir es. Warning! When changing the side at which the door opens, r emove plug from the mains. Left door opening: Remove the left side (A) of the grid cutting it from the r ear (see figure).
9 Reversing the door The side at which the door opens can be changed from the right side (as supplied) to the left side, if the installation site requir es.
10 3 10 11 9 12 13 Warning! After completion of the door rever sing opera- tion, check that the door gasket adheres to the cabi- net. If the ambient temper- ature is cold (i.
Push the appliance into place. The plug socket nec- essary for connection of the appliance to the elec- tricity supply should be positioned, so that the plug is not placed in the recess. To adjust the height pr o- ceed as follows: Loosen or tighten the two front feet.
4 11 5 ° N.B. The joint cover (B) is to be assembled after having installed the appliance in the recess. 12 3 1 2 B Push the appliance into place and r etain the cab- inet with screws thr ough the securing brackets into the worktop or adjacent woodwork as necessary .
7 8 ab clic clic c C C To mount the furnitur e door proceed as shown in the fig- ures: ☞ 13 6 a b 10 1 2 3 4 C.
14 Upper part of kitchen furniture panel Lower part of kitchen furniture panel 9/a 275 275 max 100 11 = = 10 9 b a = = 1 2 10 1 2 3 45 °.
Refit the covering strip. ☞ 13 A 15 12.
16 Fitting the plinth Important! For the efficient operation of the appliance, it is important that the original ventilation grid is used. • For an opening height dimension A=820 mm and a plinth height dimension a=1 00 mm, the plinth may be fitted without adjustments.
Electrical Connection Any electrical work requir ed to install this appliance should be carried out by a qualified electrician or competent person. WARNING – THIS APPLIANCE MUST BE EARTHED The manufacturer declines any liability s hould these safety mea- sures not be observed.
18 ➀ ➁ ➂ ➃ ➄ ➅ Description of the appliance View of the appliance ➀ Butter/cheese compartment ➁ Sliding shelf ➂ Bottle shelf ➃ Vegetable dr awers ➄ Storage shelves ➅ Thermostat Prior to Initial Start–Up Please clean the appliance interior and all accessories prior to initial start-up (see section: “Cleaning and Care”).
19 Starting up and temper ature r egulation Connect the appliance to the mains electricity supply . When the refriger ator compartment door is opened, the internal light- ing is switched on. The temperatur e selector knob is located on the right hand side of the refriger ator compartment.
Defr osting The fridge defr osts automatically The rear wall of the fridge cover s with frost when the compr essor is running, and defrosts when the compr essor is off. The water from the thawing frost evapor ates by itself. 20 Interior Accessories Stor age shelves Various glass stor age shelves are included with your appliance.
Switching off the appliance To switch off the appliance, turn the temper ature r egulator to positi on "0". If the appliance is not going to be u sed for an extended period: Remove all refriger ated packages. Switch off the appliance by turning the thermostat knob to position "0".
22 Clean the appliance and the interior accessories with a cloth and lukewarm water . Commercially available dish washing detergents may also be used. ☞ After cleaning wipe with fresh water and rub dry . An accumulation of dust will affect the performance of the appliance and cause excessive electricity consumption.
23 What to do if ... Corr ecting Malfunctions Spare parts: The following spare parts can be or dered fr om your local AEG Service Force Centr e. Y ou can fit these yourself without any special skill or training, e.
24 Symptom P ossible Cau se The food is too warm. Temper ature is not properly adjusted. Please look in the “Initial Start Up” section. Remedy Heavy build up of frost, possibly also on the door seal. Door was open for an extended period. A large quantity of warm food was placed in the appliance within the last 24 hours.
25 Service & Spar e Parts In the event of your appliance requiring service, or if you wish to pur- chase spare parts, contact your local AEG Service For ce Centre by tele- phoning: 087 05 929 929 Y our call will be automatically routed to the Service Centr e covering your post code area.
26 Noises during Oper ation The following noises are char acteristic of refriger ation appliances: • Clicks Whenever the compr essor switches on or off, a click can be heard. • Humming As soon as the compressor is in oper ation, you can hear it humming.
T echnical terminology • Refrigerant • Refrigerant Circuit • Evaporator • Compressor • Condenser Liquids that can be used to a generate a cooling effect are known as r efrigerants.
AEG Hausgeräte GmbH P ostfach 1 036 D-90327 Nürnberg http://www .aeg.hausgeraete.de © Copyright by AEG 03-030 1 2222 682-14.
デバイスAEG 66000Iの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
AEG 66000Iをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAEG 66000Iの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AEG 66000Iの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AEG 66000Iで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AEG 66000Iを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAEG 66000Iの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AEG 66000Iに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAEG 66000Iデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
