AEGメーカーF 88419 Mの使用説明書/サービス説明書
ページ先へ移動 of 27
FAVOR IT 88419 EN DISHWASHER USER MANUAL.
FOR PERFECT RESULTS Thank you for choosing th is AEG product. We have created it to give you impe ccable performance for many years, with innovative techno logies that help make life simpler – features you mi ght not find on ordinary appliances. Please spend a fe w minutes reading to get the very best from it.
CONTENTS 4 Safety information 8 Product description 9 Control panel 12 Use of the appliance 12 Setting the water softener 13 Use of dishwasher salt 14 Use of detergent and rinse aid 15 Multitab functi.
SAFETY INFORMATIO N Before the installation and use, read this manual carefully: • For your safety and the safety of your property. • To he lp the e nviron ment. • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or give it to a different person.
• Fill the appliance with salt before you start a washing programme. Remaining salt in the appliance can cause corrosion or make a hole in the bottom of the appliance. • Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwasher cleaning agent, liquid detergent).
• The water inlet hose has a safety valve and a double sheath with an inner mai ns cable. There is pressure in the water inlet hose only when the water flows. If there is a leak in the wa ter inl et hose , the saf ety val ve inter rupts the flow of wate r.
Emission wave length: 450 nm Maximum emitted power: 548 μ W To replace the internal lamp, contact the service centre. Disconnect the mains plug from the mains socket before the replacement of the internal lamp. Service cen tre • Only a qualified person can repair or work on the appli ance.
PRODUCT DESCRIPTION 1 2 3 4 5 6 7 8 9 10 1 Upper basket 2 Water hardness dial 3 Salt container 4 Detergent dispenser 5 Rinse aid dispenser 6 Rating plate 7 Filters 8 Lower spray arm 9 Upper spray arm .
CONTROL PANEL 1 3 4 5 6 7 9 2 8 1 On/off button 2 Programme guide 3 Program touchpad 4 Programme indicators 5 Display 6 Delay touchpad 7 Start touchpad 8 Indicators 9 Option touchpad Indicators Multitab indicator. It comes on when you activate the function.
Indicators Salt indica tor. It comes on when it is necessary to fill the salt co ntainer. 1) After you fill the container, the salt indicator can stay on for some hours. This does not have an unwanted effect on the operation of the appliance. Delay indicator.
Option touchpad Multita b ÖKO PLUS Extra - Hygiene Press one time ACTIVATED DEACTIVATED DEACTIVATED Press two times DEACTIVATED ACTIVATED DEACTIVATED Press three times ACTIVATED ACTIVATED DEACTIVATED.
USE OF THE APPLIANCE 1. Be sure that the set level of the water softener agrees with the water hardness in your area. If not, adjust the water softener. 2. Fill the salt container with dishwasher salt. 3. Fill the rinse aid dispenser with rinse aid. 4.
Manual adjustment Turn the water hardness dial to the posi tion 1 or 2 (refer to the table). Electronic adjustment 1. Activate the appliance. 2. Make sure that the appliance is in setting mode. 3. Press and hold the Delay touchpad and the Start touchpad at the same time until the programme indicators AUTO, PRO and SILENT flash.
USE OF DETERGENT AND RINSE AID 20 30 M A X 1 2 3 4 + - 1 2 3 4 5 6 7 Use of detergent To help the environment, do not use more than the correct quantity of detergent. Obey the instructions on the detergent packaging. How to fill the detergent dispenser: 1.
You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (highest dosage). Turn the rinse aid selector 4 to increase or decrease the dosage. MULTITAB FUNCTION The multitab function is for combi detergent tablets. These tablets contain agents as detergent, rinse aid and dishwasher s alt.
• Mix the spoons with other cutlery to prevent them to bond together. • When you put the items in the baskets, make sure that the water can touch all surfaces. • Put light items in the upper basket. Make sure that the items do not move. • Water droplets can collect on plastic items and non - stick pans.
Functions Programme Extra - Hygiene ÖKO PLUS Yes, with effect Yes, with effect Yes, without effect Yes, with effect Yes, without effect Yes, without effect Yes, with effect Yes, without effect Yes, w.
• The related programme indicator comes on. • The programme time flashes in the display. • The phase indicators of the set washing programme come on. 5. If necessary, set the extra - hygiene or ÖKO PLUS function. • The selection of these functions must always occur after the set of the washing pro- gramme.
• Close the appliance door. – The washing programme continues from the point of interruption. Cancelling the washing programme If the washing programme has not started, you can change the selection. To change the selection while the washing programme operates, it is necessary to cancel the programme.
1. Turn the filter (A) counterclockwise and remove it out from filter (B). 2. Filter (A) has two parts. To disassemble the filter, pull them apart. 3. Fully clean the parts with water. 4. Put the two parts of the filter (A) together and push. Make sure that they engage correctly in each other.
WHAT TO DO IF… The start of the appliance does not occur or it stops during operation. First try to find a solution to the problem (refer to the table).
Malfunction Possible cause Possible solution The delay start is set. • Cancel the delay start. • When the countdown is completed, the washing pro- gramme starts automatic al- ly. After the check, activate the appliance. The programme continues from the point of inter- ruption.
Problem Possible cause Possible solution The detergent can be the cause. Use a different brand of deter- gent. The dishes are wet. The washing programme was without a drying phase or with a decreased drying phase. For better drying results, keep the door ajar for some minutes.
Capacity Place settings 9 1) Connect the water in let hose to a water tap with 3/4" thre ad. If the hot water comes from alternative sources of energy, (e.g. solar panels, photovoltaic panels and aeolian), use a hot water supply to decrease energy consumption.
How to remove the appliance worktop 1. Remove the rear screws (1). 2. Pull the worktop from the behind of the appliance (2). 3. Lift the worktop and move it from the front slots (3). 4. Use the adjustable feet to adjust the level of the appliance. 5. Install the appliance under the kitchen worktop.
If you connect the water drain hose to a trap spi- got under the sink, remove the plastic membrane (A). If you do not remove the membrane, remain- ing food can cause a blockage in the drai n hose spigot A safety device impedes the dirty water to go back into the appliance.
27.
デバイスAEG F 88419 Mの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
AEG F 88419 Mをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはAEG F 88419 Mの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。AEG F 88419 Mの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。AEG F 88419 Mで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
AEG F 88419 Mを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はAEG F 88419 Mの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、AEG F 88419 Mに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちAEG F 88419 Mデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
