Chryslerメーカー200 (2014)の使用説明書/サービス説明書
ページ先へ移動 of 513
200 Chrysler Group LLC OWNER ’S MANUAL 2014 200 14C41- 126- AA First E dition Printed in U .S .A. I n f o r m a t i o n P r o v i d e d b y :.
VEHICLES SOLD IN CANAD A With respect to any V ehicles Sold in Canada, the name Chr ysler Group LL C shall be deemed to be deleted and the name Chrysler Canada Inc. used in substitution therefore . DRIVING AND AL C OHOL Drunk en driving is one of the most frequent causes of accidents.
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............
I n f o r m a t i o n P r o v i d e d b y :.
INTRODUCTION CONTENTS 䡵 INTRODUCTION ........................ 4 䡵 HOW TO USE THIS MANUAL .............. 4 䡵 W ARNINGS AND CAUTIONS ..............
INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it repr esents precision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles.
1 INTRODUCTION 5 I n f o r m a t i o n P r o v i d e d b y :.
W ARNINGS AND CAUTIONS This Owners Manual contains W ARNINGS against oper- ating procedures that could result in a collision or bodily injury . It also contains CAUTIONS against procedur es that could result in damage to your vehicle. If you do not read this entire Owners Manual, you may miss important information.
NOTE: It is illegal to remove or alter the VIN. VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to a collision resulting in serious injury or death.
I n f o r m a t i o n P r o v i d e d b y :.
THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A WORD ABOUT YOUR KEYS ............. 1 2 ▫ Ignition Key Removal ................... 1 2 ▫ Key-In-Ignition Reminder ................ 1 5 ▫ Locking the Doors with the Key ............ 1 5 䡵 SENTRY KEY® .
▫ Programming Additional T ransmitters ........ 2 7 ▫ T ransmitter Battery Replacement ........... 2 7 ▫ General Information .................... 2 8 䡵 REMOTE ST ART SYSTEM — IF EQUIPPED .... 2 8 ▫ How T o Use Remote Start ................
▫ Automatic Locking Retractor Mode (ALR) — If Equipped .......................... 5 3 ▫ Energy Management Feature .............. 5 4 ▫ Seat Belt Pretensioners .................. 5 4 ▫ Supplemental Active Head Restraints (AHR) . . .54 ▫ Enhanced Seat Belt Use Reminder System (BeltAlert®) .
A WORD ABOUT YOUR KEYS The authorized dealer that sold you your vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your authorized dealer . Ask your authorized dealer for these numbers and keep them in a safe place.
NOTE: • If you try to remove the key before you place the shift lever in P ARK, the key may become trapped tempo- rarily in the ignition switch lock cylinder .
• For vehicles equipped with the Electronic V ehicle Infor- mation Center (EVIC), the power window switches, radio, hands–free system (if equipped), and power out- lets will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position.
Key-In-Ignition Reminder Opening the driver’s door when the key is in the ignition sounds a signal to remind you to remove the key . NOTE: • The Key-In-Ignition reminder only sounds when the ignition key is placed in the LOCK or ACC position.
During normal operation, after turning on the ignition switch, the V ehicle Security Light will turn on for three seconds for a bulb check. If the light r emains on after the bulb check, it indicates that there is a problem with the electronics.
CAUTION! Always remove the Sentry Key® from the vehicle and lock all doors when leaving the vehicle unat- tended. At the time of purchase, the original owner is provided with a four-digit Personal Identification Number (PIN). The PIN is required for authorized dealer replacement of keys.
4. Insert a blank Sentry Key® into the ignition switch. T urn the ignition switch to the ON/RUN position within 60 seconds. After 10 seconds, a single chime will sound.
VEHICLE SECURITY ALARM — IF EQUIPPED The V ehicle Security Alarm monitors the doors and tr unk for unauthorized entry and ignition switch for unauthor- ized operation. While the V ehicle Security Alarm is armed, interior switches for door locks and decklid release are disabled.
3. The V ehicle Security Light in the instrument cluster will flash for 16 seconds. This shows that the V ehicle Security Alarm is arming. During this period, if a door is opened, the ignition switch is turned to ON/RUN, or the power door locks are unlocked in any manner , the V ehicle Security Alarm will automatically disarm.
The V ehicle Security Alarm is designed to protect your vehicle; however , you can create conditions where the V ehicle Security Alarm will give you a false alarm. If one of the previously described arming sequences has oc- curred, the V ehicle Security Alarm will arm regar dless of whether you are in the vehicle or not.
• The Illuminated Entry system will not operate if the dimmer control is in the “Dome defeat” position (extreme bottom position). REMOTE KEYLESS ENTR Y (RKE) — IF EQUIPPED This system allows y.
Remote Key Unlock, Driver Door/All Doors First Press This feature lets you pr ogram the system to unlock either the driver’s door or all doors on the first press of the UNLOCK button on the RKE transmitter .
Flash Lights W ith Lock The feature will cause the turn signal lights to flash when the doors ar e locked or unlocked with the RKE transmit- ter . This featur e can be turned on or turned of f.
Illuminated Approach — If Equipped This feature activates the headlights for up to 90 seconds when the doors are unlocked with the RKE transmitter . The time for this feature is programmable on vehicles equipped with EVIC.
3. T est the feature while outside of the vehicle by press- ing the LOCK button on the RKE transmitter with the ignition in the LOCK position and the key removed.
Programming Additional T ransmitters Refer to Sentry Key® “Customer Key Programming.” If you do not have a programmed RKE transmitter , contact your authorized dealer for details. T ransmitter Battery Replacement The recommended replacement battery is CR2032.
General Information This device complies with part 15 of FCC rules and with RS-210 of Industry Canada. Operation is subject to the following conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference that may be received including interference that may cause unde- sired operation.
How T o Use Remote Start All of the following conditions must be met before the engine will remote start: • Shift lever in P ARK • Doors closed • Hood closed • T runk closed • Hazard switch .
Remote Start Abort Message On Electronic V ehicle Information Center (EVIC) — If Equipped The following messages will display in the EVIC if the vehicle fails to remote start or exits remote start p.
Remote start will also cancel if any of the following occur: • The engine stalls or RPM exceeds 2500 • Any engine warning lamps come on • Low Fuel Light turns on • The hood is opened • The h.
DOOR LOCKS Manual Door Locks T o lock each door , push the door lock knob on each door trim panel downward. T o unlock each door , pull the inside door handle. W ARNING! • For personal security and safety in the event of an collision, lock the vehicle doors as you drive as well as when you park and leave the vehicle.
W ARNING! (Continued) • Do not leave the Key Fob in or near the vehicle, or in a location accessible to children. A child could operate power windows, other controls, or move the vehicle. CAUTION! An unlocked vehicle is an invitation to thieves. Always remove the key from the ignition and lock all of the doors when leaving the vehicle unattended.
Automatic Door Locks — If Equipped The auto door lock feature default condition is enabled. When enabled, the door locks will lock automatically when the vehicle’s speed exceeds 15 mph (24 km/h). The auto door lock feature can be enabled or disabled by your authorized dealer .
• For vehicles not equipped with the EVIC, perform the following procedure: 1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between LOCK and ON/ RUN and then back to LOCK four times, ending up in the LOCK position.
The Child-Pr otection Door Locks ar e located inside the rear edge of the door . Insert the tip of the ignition key or similar flat-bladed object into the lock and rotate clock- wise approximately one-quarter turn to the lock position or counter clockwise to the unlock position (as indicated by the stamped icons).
There is a single window control on the front and rear passenger ’s door trim panel, which operates the front and rear passenger door windows. The window controls will operate when the ignition switch is turned to the ON/RUN or ACC position, and when the accessory delay feature is active.
T o cancel the Auto-Down movement, operate the switch either in the up or down direction and release the switch. For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power window switches will remain active for 45 seconds after the ignition switch is turned to the LOCK position.
• Any impact due to rough road conditions may trigger the auto reverse function unexpectedly during auto- closure. If this happens, pull the switch lightly to the first detent and hold to close window manually . W ARNING! When the window is almost closed, there is no anti-pinch protection.
Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter-type sound in the ears. Y our vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in certain open or partially open positions.
W ith the ignition switch in the ON/RUN position, the word “dECK ” will display in place of the odometer display indicating that the trunk is open.
T runk Internal Emergency Release As a security measur e, a T runk Internal Emer gency Release lever is built into the trunk latching mechanism. In the event of an individual being locked inside the trunk, the trunk can be simply opened by pulling on the glow-in-the- dark handle attached to the trunk latching mechanism.
• Knee bolsters/blockers for front seat occupants • Front seat belts incorporate pretensioners that may enhance occupant protection by managing occupant energy during an impact event • All seat .
W ARNING! Infants in rear facing child restraints should never ride in the front seat of a vehicle with a passenger Ad- vanced Front Air Bag. An air bag deployment can cause severe injury or death to infants in that position.
W ARNING! • Relying on the air bags alone could lead to more severe injuries in a collision. The air bags work with your seat belt to restrain you properly . In some collisions, the air bags won’t deploy at all. Always wear your seat belts even though you have air bags.
Research has shown that seat belts save lives, and they can reduce the seriousness of injuries in a collision. Some of the worst injuries happen when people are thrown from the vehicle. Seat belts reduce the possibility of ejection and the risk of injury caused by striking the inside of the vehicle.
W ARNING! (Continued) • T wo people should never be belted into a single seat belt. People belted together can crash into one another in a collision, hurting one another badly . Never use a lap/shoulder belt or a lap belt for more than one person, no matter what their size.
W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you prop- erly .
W ARNING! • A belt that is worn under your arm is dangerous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones.
W ARNING! • A lap belt worn too high can increase the risk of injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdo- men. Always wear the lap part of your seat belt as low as possible and keep it snug.
Lap/Shoulder Belt Untwisting Procedure Use the following procedur e to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180 degrees to create a fold that begins immediately above the latch plate.
As a guide, if you are shorter than average, you will prefer a lower position, and if you are taller than average, you will prefer a higher position. When you release the anchorage, try to move it up or down to make sure that it is locked in position.
Automatic Locking Retractor Mode (ALR) — If Equipped In this mode, the shoulder belt is automatically pre-locked. The belt will still retract to remove any slack in the shoulder belt. The Automatic Locking Mode is available on all passenger-seating positions with a combination lap/ shoulder belt.
Energy Management Feature This vehicle has a safety belt system with an Energy Management featur e in the front seating positions to help further reduce the risk of injury in the event of a head-on collision. This safety belt system has a retractor assembly that is designed to r elease webbing in a contr olled manner .
How The Active Head Restraints (AHR) W ork The Occupant Restraint Controller (ORC) determines whether the severity , or type of rear impact will require the Active Head Restraints (AHR) to deploy . If a rear impact requires deployment, both the driver and front passenger seat AHRs will be deployed.
CAUTION! All occupants, including the driver , should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of a collision.
1 — Downward Movement 2 — Rearward Movement 3 — Final Downward Movement T o Engage Locking Mechanism 2 THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE 57 I n f o r m a t i o n P r o v i d e d b y :.
4. The AHR front soft foam and trim half should lock into the back decorative plastic half. NOTE: • If you have difficulties or problems resetting the Active Head Restraints, see an authorized dealer . • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer .
The BeltAlert® warning sequence begins after the vehicle speed is over 5 mph (8 km/h), by blinking the Seat Belt Reminder Light and sounding an intermittent chime. Once the sequence starts, it will continue for the entire duration or until the respective seatbelts are fastened.
Seat Belt Extender If a seat belt is too short, even when fully extended and when the adjustable upper shoulder belt anchorage (if equipped) is in its lowest position, your authorized dealer can provide you with a seat belt extender . This extender should be used only if the existing belt is not long enough.
NOTE: The Driver and Passenger Advanced Fr ont Air Bags are certified to new Federal regulations. The Advanced Front Air Bags have a multistage inflator design. This allows the air bag to have different rates of inflation that are based on several factors, including the severity and type of collision.
This vehicle is equipped with Supplemental Side Air Bag Inflatable Curtains (SABIC) to protect the driver , front, and rear passengers sitting next to a window . If the vehicle is equipped with SABIC, they are located above the side windows. The trim covering the side air bags is labeled SRS AIRBAG.
• Supplemental Side Air Bag Inflatable Curtains (SABIC) • Front and Side Impact Sensors • Front Seat Belt Pretensioners, Seat Belt Buckle Switch, and Seat T rack Position Sensors Advanced Front Air Bag Features The Advanced Front Air Bag system has multistage driver and front passenger air bags.
Supplemental Seat-Mounted Side Air Bags (SAB) Supplemental Seat-Mounted Side Air Bags (SAB) may provide enhanced protection to help protect an occupant during a side impact. The SAB is marked with an air bag label sewn into the outboard side of the front seats.
NOTE: • Air Bag covers may not be obvious in the interior trim; but they will open during air bag deployment. • Being too close to the SAB and SABIC air bags during deployment could cause you to be severely injured or killed.
W ARNING! (Continued) • Y our vehicle is equipped with SABIC air bags, do not have any accessory items installed which will alter the roof, including adding a sunroof to your vehicle. Do not add roof racks that require perma- nent attachments (bolts or screws) for installation on the vehicle roof.
Air Bag Deployment Sensors And Controls Occupant Restraint Controller (ORC) The ORC is part of a Federally regulated safety system requir ed for this vehicle. The ORC determines if deployment of the front and/or side air bags in a frontal or side collision is required.
The ORC monitors the r eadiness of the electronic parts of the air bag system whenever the ignition switch is in the ST AR T or ON/RUN position. If the key is in the OFF position, in the ACC position, or not in the ignition, the air bag system is not on and the air bags will not inflate.
Driver And Passenger Advanced Front Air Bag Inflator Units The Driver and Passenger Advanced Front Air Bag Inflator Units are located in the center of the steering wheel and on the right side of the instrument panel. When the ORC detects a collision requiring the Ad- vanced Front Air Bags, it signals the inflator units.
in about 10 milliseconds. The side air bag moves at a very high speed and with such a high force that it could injure you if you are not seated properly , or if items are positioned in the ar ea wher e the side air bag inflates. This especially applies to children.
Enhanced Accident Response System In the event of an impact causing air bag deployment, if the communication network remains intact, and the power remains intact, depending on the nature of the event the ORC will determine whether to have the Enhanced Accident Response System perform the following functions: • Cut off fuel to the engine.
However , if you haven’t healed significantly within a few days, or if you have any blistering, see your doctor immediately . • As the air bags deflate, you may see some smoke-like particles. The particles are a normal by-product of the process that generates the non-toxic gas used for air bag inflation.
Maintaining Y our Air Bag System W ARNING! • Modifications to any part of the air bag system could cause it to fail when you need it. Y ou could be injured if the air bag system is not there to protect you.
Air Bag W arning Light Y ou will want to have the air bags ready to inflate for your protection in a collision. The Air Bag W arning Light monitors the internal circuits and interconnecting wiring associated with air bag system electrical components.
time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as: • How various systems in your vehicle were operating; • Whether or not the driver and passenger safe.
There are differ ent sizes and types of restraints for children from newborn size to the child almost large enough for an adult safety belt. Always check the child seat Owner ’s Manual to make sure you have the correct seat for your child.
Summary Of Recommendations For Restraining Children In V ehicles Child Size, Height, W eight or Age Recommended T ype of Child Restraint Infants and T oddlers Children who are two years old or younger.
Infants And Child Restraints Safety experts r ecommend that childr en ride r earward- facing in the vehicle until they are two years old or until they reach either the height or weight limit of their rear facing child safety seat. T wo types of child restraints can be used rearwar d-facing: infant carriers and convertible child seats.
Older Children And Child Restraints Children who are two years old or who have outgrown their rear-facing convertible child seat can ride forward- facing in the vehicle.
Children T oo Large For Booster Seats Children who are large enough to wear the shoulder belt comfortably , and whose legs are long enough to bend over the front of the seat when their back is against the seatback, should use the seat belt in a rear seat.
Recommendations For Attaching Child Restraints Restraint T ype Combined W eight of the Child + Child Restraint Use any attachment method shown with an “X” Below LA TCH – Lower Anchors Only Seat Belt Only LA TCH – Lower Anchors + T op T ether Anchor Seat Belt + T op T ether Anchor Rear-Facing Child Restraint Up to 65 lbs (29.
Lower Anchors and T ethers for Children (LA TCH) Restraint System Y our vehicle is equipped with the child restraint anchor - age system called LA TCH, which stands for Lower Anchors and T ethers for CHildr en. The LA TCH system has three vehicle anchor points for installing LA TCH- equipped child seats.
LA TCH Positions For Installing Child Restraints In This V ehicle Lower Anchorage Symbol 2 anchorages per seating position T op T ether Anchorage Symbol 2 THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE .
What is the weight limit (child’s weight + weight of the child restraint) for using the LA TCH anchorage system to attach the child restraint? 65 lbs (29.5 kg) Use the LA TCH anchorage system until the combined weight of the child and the child restraint is 65 lbs (29.
Can the rear -facing child restraint touch the back of the front passenger seat? Y es The child seat may touch the back of the front passenger seat if the child restraint manufacturer also allows contact. See your child restraint owner ’s manual for more information.
Locating The LA TCH Anchorages In addition, there are tether strap anchorages behind each rear seating position located in the panel between the rear seatback and the rear window . These tether strap anchorages are under a plastic cover with the tether anchorage symbol on it.
W ARNING! Never use the same lower anchorage to attach more than one child restraint. If you are installing LA TCH- compatible child restraints next to each other , you must use the seat belt for the center position. Y ou can then use either the LA TCH anchors or the vehicle’ s seat belt for installing child seats in the outboard positions.
4. Attach the lower hooks or connectors of the child restraint to the lower anchorages in the selected seat- ing position. 5. If the child restraint has a tether strap, connect it to the top tether anchorage. See the section “Installing Child Restraints Using the T op T ether Anchorage” for direc- tions to attach a tether anchor .
W ARNING! Improper installation of a child restraint to the LA TCH anchorages can lead to failure of the re- straint. The child could be badly injured or killed. Follow the child restraint manufacturer ’ s directions exactly when installing an infant or child restraint.
Lap/Shoulder Belt Systems for Installing Child Restraints in this V ehicle 90 THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
What is the weight limit (child’s weight + weight of the child restraint) for using the T ether Anchor with the seat belt to attach a forward facing child restraint? 65 lbs (29.5 kg) Always use the tether anchor when using the seat belt to install a forward facing child restraint, up to the recommended weight limit of the child restraint.
Installing A Child Restraint with a Switchable Automatic Locking Retractor (ALR) 1. Place the child seat in the center of the seating position. For some second row seats, you may need to recline the seat and/or raise the head restraint to get a better fit.
8. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. Refer to “Lower Anchors and T ethers for Chil- dren (LA TCH) Restraint System” for directions to attach a tether anchor .
5. If the child restraint has a top tether strap and the seating position has a top tether anchorage, connect the tether strap to the anchorage and tighten the tether strap. Refer to “Lower Anchors and T ethers for Chil- dren (LA TCH) Restraint System” for directions to attach a tether anchor .
Installing Child Restraints Using The T op T ether Anchorage 1. Look behind the seating position where you plan to install the child restraint to find the tether anchorage. Y ou may need to move the seat forward to provide better access to the tether anchorage.
4. Attach the tether strap hook of the child restraint to the top tether anchorage as shown in the diagram. 5. Remove slack in the tether strap according to the child restraint manufacturer ’s instructions. T ransporting Pets Air Bags deploying in the front seat could harm your pet.
CAUTION! Never use Non-Detergent Oil or Straight Mineral Oil in the engine or damage may result. NOTE: A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the break-in and not interpreted as an indication of difficulty .
Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you.
Safety Checks Y ou Should Make Inside The V ehicle Seat Belts Inspect the belt system periodically , checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system. Front seat belt assemblies must be replaced after a collision.
Floor Mat Safety Information Always use floor mats designed to fit the footwell of your vehicle. Use only floor mats that leave the pedal area unobstructed and that are firmly secured so that they cannot slip out of position and interfere with the pedals or impair safe operation of your vehicle in other ways.
Periodic Safety Checks Y ou Should Make Outside The V ehicle T ires Examine tires for excessive tread wear and uneven wear patterns. Check for stones, nails, glass, or other objects lodged in the tread or sidewall. Inspect the tread for cuts and cracks.
I n f o r m a t i o n P r o v i d e d b y :.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 MIRRORS ........................... .107 ▫ Inside Day/Night Mirror ............... .107 ▫ Automatic Dimming Mirror — If Equipped . . .107 ▫ Power Mirrors ...................... .109 ▫ Adjusting Side V iew Mirrors .
䡵 S E A T S ............................. .149 ▫ Power Seats — If Equipped ............. .150 ▫ Heated Seats — If Equipped ............ .152 ▫ Manual Front Seat Adjustment ........... .154 ▫ Driver Seat Manual Height Adjuster — If Equipped .
▫ Instrument Panel Dimmer .............. .169 ▫ Map/Reading/Interior Lights ........... .170 ▫ Battery Saver Feature ................. .171 䡵 WINDSHIELD WIPERS AND W ASHERS ..... .172 ▫ Intermittent W iper System .............. .173 ▫ W indshield W ashers .
䡵 POWER SUNROOF — IF EQUIPPED ....... .190 ▫ Opening Sunroof — Express ............. .191 ▫ Opening Sunroof — Manual Mode ........ .191 ▫ Closing Sunroof — Express .............. .191 ▫ Closing Sunroof — Manual Mode ......... .191 ▫ Pinch Protect Feature .
MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirr or to center on the view through the rear window . Headlight glare can be reduced by moving the small control under the mirror to the night position (toward the rear of the vehicle).
NOTE: This feature is disabled when the vehicle is moving in reverse. CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean.
Power Mirrors The power mirror control is located on the driver ’s door trim panel. T o adjust a mirror , turn the control wand toward the left or right mirror positions indicated. T ilt the control wand in the direction you want the mirror to move.
Adjusting Side View Mirrors Outside Mirror — Driver Side Adjust the outside mirror to center on the adjacent lane of traffic, with a slight overlap of the view obtained on the inside mirror .
Illuminated V anity Mirrors — If Equipped An illuminated vanity mirror is on each sun visor . T o use the mirror , lower the sun visor and rotate the mirror cover upward. The lights will turn on automatically . Closing the mirror cover turns off the lights.
Uconnect® Phone allows you to transfer calls between the system and your mobile phone as you enter or exit your vehicle and enables you to mute the system’s microphone for private conversation. The Uconnect® Phone is driven through your Bluetooth® “Hands-Free Profile” mobile phone.
V oice Command Button Actual button location may vary with the ra- dio. The individual buttons are described in the “Operation” section. The Uconnect® Phone can be used with any Hands-Free Profile certified Bluetooth® mobile phone. See the Uconnect® website for supported phones.
• For each feature explanation in this section, only the compound form of the voice command is given. Y ou can also break the commands into parts and say each part of the command when you ar e asked for it.
The following are general phone to Uconnect® Phone pairing instructions: • Press the button to begin. • After the “Ready” prompt and the following beep, say “Device Pairing”. • When prompted, after the beep, say “Pair a Device” and follow the audible prompts.
Dial By Saying A Number • Press the button to begin. • After the “Ready” prompt and the following beep, say “Dial”. • The system will pr ompt you to say the number you want to call. • For example, you can say “234-567-8901”. • The Uconnect® Phone will confirm the phone number and then dial.
Phonebook Download – Automatic Phonebook T ransfer From Mobile Phone If equipped and specifically supported by your phone, Uconnect® Phone automatically downloads names (text names) and number entries from your mobile phone’s phonebook. Specific Bluetooth® Phones with Phone Book Access Profile may support this feature.
Add Names T o Y our Uconnect® Phonebook NOTE: Adding names to the Uconnect® Phonebook is recommended when the vehicle is not in motion. • Press the button to begin. • After the “Ready” prompt and the following beep, say “Phonebook New Entry”.
• Press the button to begin. • After the “Ready” prompt and the following beep, say “Phonebook Edit”. • Y ou will then be asked for the name of the phonebook entry that you wish to edit. • Next, choose the number designation (home, work, mobile, or other) that you wish to edit.
• After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. Y ou can either say the name of a phonebook entry that you wish to delete or you can say “List Names” to hear a list of the entries in the phonebook from which you choose.
List All Names In The Uconnect® Phonebook • Press the button to begin. • After the “Ready” prompt and the following beep, say “Phonebook List Names”. • The Uconnect® Phone will play the names of all the phonebook entries, including the downloaded phone- book entries, if available.
Answer Or Reject An Incoming Call — Call Currently In Progress If a call is currently in pr ogress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your mobile phone. Pr ess the button to place the current call on hold and answer the incoming call.
Conference Call When two calls ar e in progr ess (one active and one on hold), press and hold the button until you hear a double beep indicating that the two calls have been joined into one conference call.
Call Continuation Call continuation is the progr ession of a phone call on the Uconnect® Phone after the vehicle ignition has been switched to OFF . Call continuation functionality avail- able on the.
Emergency Assistance If you are in an emergency and the mobile phone is reachable: • Pick up the phone and manually dial the emer gency number for your area. If the phone is not reachable and the Uconnect® Phone is operational, you may reach the emergency number as follows: • Press the button to begin.
W ARNING! T o use you Uconnect® Phone System in an emergency , your mobile phone must be: • turned on, • paired to the Uconnect® System, • and have network coverage. Roadside Assistance If you need roadside assistance: • Press the button to begin.
V oice Mail Calling T o learn how to access your voice mail, r efer to “W orking with Automated Systems”. W orking With Automated Systems This method is used in instances wher e one generally has to press numbers on the mobile phone keypad while navigating through an automated telephone system.
NOTE: • Y ou may not hear all of the tones due to mobile phone network configurations. This is normal. • Some paging and voice mail systems have system time out settings that are too short and may not allow the use of this feature.
Dialing Using The Mobile Phone Keypad Y ou can dial a phone number with your mobile phone keypad and still use the Uconnect® Phone (while dialing via the mobile phone keypad, the user must exercise caution and take precautionary safety measures).
Advanced Phone Connectivity T ransfer Call T o And From Mobile Phone The Uconnect® Phone allows ongoing calls to be trans- ferred from your mobile phone to the Uconnect® Phone without terminating the call.
Select Another Mobile Phone This feature allows you to select and start using another phone paired with the Uconnect® Phone. • Press the button to begin. • After the “Ready” prompt and the following beep, say “Setup Select Phone” and follow the prompts.
V oice T raining For users experiencing difficulty with the system recogniz- ing their voice commands or numbers, the Uconnect® Phone V oice T raining feature may be used. T o enter this training mode, follow one of the two following pr ocedures: From outside the Uconnect® Phone mode (e.
V oice Command • For best performance, adjust the rearview mirror to provide at least ½ in (1 cm) gap between the overhead console (if equipped) and the mirror . • Always wait for the beep before speaking. • Speak normally , without pausing, just as you would speak to a person sitting a few feet/meters away from you.
• Even though international dialing for most number combinations is supported, some shortcut dialing number combinations may not be supported. • In a convertible vehicle, system performance may be compromised with the convertible top down.
Read Messages: If you r eceive a new text message while your phone is connected to Uconnect® Phone, an announcement will be made to notify you that you have a new text message. If you wish to hear the new message: • Press the button. • After the “Ready” prompt and the following beep, say “SMS Read” or “Read Messages.
List of Preset Messages: 1. Y es 2. No 3. Where are you? 4. I need more direction. 5. L O L 6. Why 7. I love you 8. Call me 9. Call me later 10. Thanks 1 1. See Y ou in 15 minutes 12. I am on my way 13. I’ll be late 14. Are you there yet? 15. Where are we meeting? 16.
T urn SMS Incoming Announcement ON/OFF T urning the SMS Incoming Announcement OFF will stop the system from announcing the new incoming mes- sages. • Press the button. • After the “Ready” prompt and the following beep, say “Setup, SMS Incoming Message Announcement,” you will then be given a choice to change it.
138 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 139 I n f o r m a t i o n P r o v i d e d b y :.
140 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE I n f o r m a t i o n P r o v i d e d b y :.
V oice Commands Primary Alternate (s) zero one two three four five six seven eight nine star (*) plus (+) pound (#) add location V oice Commands Primary Alternate (s) all call cancel confirmation prom.
V oice Commands Primary Alternate (s) help home language list names list phones mobile mute mute off new entry no other pair a phone phone pairing pairing phonebook phone book V oice Commands Primary .
General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
W ARNING! Any voice commanded system should be used only in safe driving conditions following all applicable laws. Y our attention should be focused on safely operating the vehicle. Failure to do so may result in a collision causing serious injury or death.
Commands The V oice Command system understands two types of commands. Universal commands are available at all times. Local commands are available if the supported radio mode is active. Changing the V olume 1. Start a dialogue by pressing the V oice Command button.
Radio AM T o switch to the AM band, say “AM” or “Radio AM”. In this mode, you may say the following commands: • “Frequency #” (to change the frequency) • “Next Station” (to select .
Disc Mode T o switch to the disc mode, say “Disc”. In this mode, you may say the following commands: • “T rack” (#) (to change the track) • “Next T rack” (to play the next track) • “Previous T rack” (to play the previous track) • “Main Menu” (to switch to the main menu) USB Mode T o switch to USB mode, say “USB”.
– “Delete” (to delete the recor ding) • “Play Memos” (to play pr eviously recor ded memos) — During the playback you may press the V oice Com- mand button to stop playing memos.
.
Power Seats — If Equipped The power seat switches are located on the outboard side of the seat near the floor . Use the bottom switch to move the seat up, down, forward, rearward, or to tilt the seat. The top switch controls the seatback recliner . W ARNING! • Adjusting a seat while driving may be dangerous.
CAUTION! Do not place any article under a power seat or impede its ability to move as it may cause damage to the seat controls. Seat travel may become limited if movement is stopped by an obstruction in the seat’ s path. Adjusting The Seat Forward Or Rearward The seat can be adjusted both forward and rearward.
W ARNING! • Adjusting a seat while driving may be dangerous. Moving a seat while driving could result in loss of control which could cause a collision and serious injury or death. • Seats should be adjusted before fastening the seat belts and while the vehicle is parked.
Y ou can choose from HIGH, LOW or OFF heat settings. Amber indicator lights in each switch indicate the level of heat in use. T wo indicator lights will illuminate for HIGH, one for LOW and none for OFF . Press the switch once to select HIGH-level heating.
Manual Front Seat Adjustment The manual seat adjustment bar is at the front of the seat, near the floor . Pull the bar upward to move the seat forward or rear - ward. Release the bar once the seat is in the position desired. Then, using body pressure, move forward and rearwar d on the seat to be sure that the seat adjusters have latched.
Driver Seat Manual Height Adjuster — If Equipped A lever style height adjustment feature enhances comfort for petite as well as tall drivers. A lever with a ratcheting mechanism, located on the outboard side of the seat, raises and lowers it. T otal travel is 2.
W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
Head Restraints Head restraints are designed to reduce the risk of injury by restricting head movement in the event of a rear impact. Head r estraints should be adjusted so that the top of the head restraint is located above the top of your ear .
T o raise the head restraint, pull upward on the head restraint. T o lower the head restraint, press the push button, located at the base of the head restraint, and push downward on the head restraint. For comfort the Active Head Restraints can be tilted forward and r earward.
NOTE: • The head restraints should only be removed by quali- fied technicians, for service purposes only . If either of the head restraints require r emoval, see your autho- rized dealer .
W ARNING! (Continued) • Active Head Restraints may be deployed if they are struck by an object such as a hand, foot or loose cargo. T o avoid accidental deployment of the Ac- tive Head Restraint ensure that all cargo is secured, as loose cargo could contact the Active Head Re- straint during sudden stops.
The hard seatback features a work surface and a molded rim for retaining items stored on the seatback panel. Folding Rear Seat T o provide additional storage area, the rear seatback can be folded forward. Pull on the loops to fold down either or both seatbacks.
When returning the rear seatback to the upright position, be sure the seatback is latched. W ARNING! The rear cargo area of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children. They could be seriously injured in a collision.
TO OPEN AND CLOSE THE HOOD T o open the hood, two latches must be released. 1. Pull the hood release lever located under the left side of the instrument panel. 2. Then lift the secondary latch located under the front edge of the hood, near the center and raise the hood.
Use the hood prop rod to secure the hood in the open position. Place the upper end of the prop rod in the hole on the left underside of the hood. NOTE: Before closing the hood, make sur e to stow the prop rod in its proper location. CAUTION! T o prevent possible damage, do not slam the hood to close it.
LIGHTS Multifunction Lever The multifunction lever controls the operation of the parking lights, headlights, headlight beam selection, passing light, fog lights, instrument panel light dimming and turn signals. The multifunction lever is located on the left side of the steering column.
Headlights And Parking Lights T urn the end of the multifunction lever to the first detent for parking light operation. T urn to the second detent for headlight operation. Automatic Headlights — If Equipped T urning the end of the multifunction lever to the third detent (AUTO), will activate the automatic headlight system.
W ith the engine running and the multifunction lever in the AUTO position, the headlights will turn on and turn off based on the surrounding light levels. Headlight Time Delay There is also a feature that delays turning off the vehicle lights for 30, 60 or 90 seconds after the ignition switch is turned OFF .
NOTE: If either light remains on and does not flash, or there is a very fast flash rate, check for a defective outside light bulb. If an indicator fails to light when the lever is moved, it would suggest that the indicator bulb is defective.
NOTE: The front fog lights will only operate with the headlights on low beam. Selecting high beam headlights will turn off the front fog lights. Daytime Running Lights — If Equipped The front turn s.
Rotate the center portion of the lever upward to the next detent position to brighten the odometer and radio when the parking lights or headlights are on. Rotate the center portion of the lever upward to the last detent to turn on the interior lighting.
There is a second light located midway back in the headliner . T o protect the battery , the interior lights will turn off automatically 10 minutes after the ignition switch is moved to the LOCK position. This will occur if the interior lights were switched on manually or are on because a door is open.
WINDSHIELD WIPERS AND W ASHERS The wipers and washers ar e operated by a switch on the control lever . The lever is located on the right side of the steering column. Rotate the end of the lever to the LO position for low-speed wiper operation, or to the HI position for high-speed wiper operation.
NOTE: The wipers will automatically return to the park position if you turn the ignition switch OFF while they are operating. The wipers will resume operation when you turn the ignition switch to the ON position again. CAUTION! • T urn the windshield wipers off when driving through an automatic car wash.
NOTE: The wiper delay times depend on vehicle speed. If the vehicle is moving less than 10 mph (16 km/h), delay times will be doubled. Windshield W ashers T o use the washer , pull the windshield wiper/washer control lever toward you and hold it for as long as washer spray is desired.
W ARNING! Sudden loss of visibility through the windshield could lead to a collision. Y ou might not see other vehicles or other obstacles. T o avoid sudden icing of the windshield during freezing weather , warm the windshield with defroster before and during wind- shield washer use.
Headlights With Wipers Feature (Available With Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers are turned on if the multifunction lever (on the left side of the steering column) is placed in the AUTO position.
T o unlock the steering column, push the lever downward. T o tilt the steering column, move the steering wheel upward or downwar d as desired. T o lengthen or shorten the steering column, pull the steering wheel outward or push it inward as desired. T o lock the steering column in position, pull the lever upward until fully engaged.
NOTE: In order to ensure proper operation, the Elec- tronic Speed Control System has been designed to shut down if multiple Speed Contr ol functions are operated at the same time.
T o Deactivate A soft tap on the brake pedal, pushing the CANCEL button, or normal brake pressur e while slowing the vehicle will deactivate Electronic Speed Control without erasing the set speed memory . Pressing the ON/OFF button or turning the ignition switch OFF erases the set speed memory .
Using Electronic Speed Control On Hills The transmission may downshift on hills to maintain the vehicle set speed. NOTE: The Electronic Speed Control system maintains speed up and down hills.
NOTE: HomeLink® is disabled when the V ehicle Secu- rity Alarm is active. HomeLink® Buttons/Overhead Consoles HomeLink® Buttons/Sunvisor/Headliner 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 181.
Before Y ou Begin Programming HomeLink® Be sure that your vehicle is parked outside of the garage before you begin programming. For more efficient programming and accurate transmis- sion of the radio.
1. T urn the ignition switch to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away fr om the HomeLink® button you wish to program while keeping the HomeLink® indicator light in view . 3. Simultaneously press and hold both the Homelink® button you want to program and the hand-held trans- mitter button.
5. At the garage door opener motor (in the garage), locate the “LEARN” or “TRAINING” button. This can usually be found where the hanging antenna wire is attached to the garage door opener/device motor . Firmly press and release the “LEARN” or “TRAIN- ING” button.
Programming A Non-Rolling Code For programming Garage Door Openers manufactured before 1995. 1. T urn the ignition switch to the ON/RUN position. 2. Place the hand-held transmitter 1 to 3 in (3 to 8 cm) away from the HomeLink® button you wish to pr o- gram while keeping the HomeLink® indicator light in view .
Reprogramming A Single HomeLink® Button T o r eprogram a channel that has been previously trained, follow these steps: 1. Cycle the ignition to the ON/RUN position. 2. Press and hold the desired HomeLink® button until the indicator light begins to flash after 20 seconds.
3. Continue to press and hold the HomeLink® button, while you press and release (“cycle”), your hand-held transmitter every two seconds until HomeLink® has successfully accepted the frequency signal. The indi- cator light will flash slowly and then rapidly when fully trained.
Using HomeLink® T o operate, press and release the programmed HomeLink® button. Activation will now occur for the programmed device (i.e., garage door opener , gate operator , security system, entry door lock, home/office lighting, etc.,). The hand-held transmitter of the device may also be used at any time.
W ARNING! • Y our motorized door or gate will open and close while you are programming the universal trans- ceiver . Do not program the transceiver if people, pets or other objects are in the path of the door or gate.
POWER SUNROOF — IF EQUIPPED The sunroof controls are mounted between the dome/ reading lights. W ARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch.
Opening Sunroof — Express Press the switch rearward and release it within one-half second. The sunr oof and sunshade will open automati- cally from any position. The sunroof and sunshade will open fully and stop automatically . This is called “Express Open”.
Pinch Protect Feature This feature will detect an obstruction in the opening of the sunroof during Express Close operation. If an ob- struction in the path of the sunroof is detected, the sunroof will automatically retract. Remove the obstruc- tion if this occurs.
Sunroof Maintenance Use only a non-abrasive cleaner and a soft cloth to clean the glass panel. Ignition Off Operation For V ehicles Not Equipped W ith The Electronic V ehicle Information Center (EVIC) The power sunroof switch will r emain active for 45 seconds after the ignition switch is turned to the LOCK position.
The instrument panel power outlet, located below the climate contr ol knobs, has power available only when the ignition is ON. This power outlet will also operate a conventional cigar lighter unit. NOTE: T o preserve the heating element, do not hold the lighter in the heating position.
NOTE: T o ensure proper operation a MOP AR® knob and element must be used. CAUTION! • Do not exceed the maximum power of 160 W atts (13 Amps) at 12 V olts. If the 160 W att (13 Amp) power rating is exceeded the fuse protecting the system will need to be replaced.
W ARNING! T o avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 V olt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure.
CIGAR LIGHTER AND ASH RECEIVER — IF EQUIPPED An optional ash receiver is available from your autho- rized dealer and will fit in the center console front cupholder . The optional ash receiver also comes with a cigar lighter that can be used with the power outlets.
Rear Cupholders The rear seat cupholders are located in the armrest between the rear seats. Pull down the armrest to use the cupholders. Rear Seat Bottle Holder There ar e built-in bottle holders located in both rear door trim panels.
W ARNING! If containers of hot liquid are placed in the bottle holder , they can spill when the door is closed, burn- ing the occupants. Be careful when closing the doors to avoid injury . STORAGE Glovebox Storage Compartment The glovebox storage compartment is located on the right side of the instrument panel.
CONSOLE FEA TURES Storage The center console is located between the front driver and passenger seats. The center console armrest slides forward from design position to provide added user comfort. The center console can be used for storage and is also equipped with an electrical power outlet.
The top compartment holds small items, such as a pen and note pad, while the larger bottom compartment will hold CDs and alike. The bottom compartment also con- tains a 12 V olt power outlet. The console’s front opening lid allows for easy access to these compartments.
CARGO AREA FEA TURES The 60/40 split-folding rear seat provides cargo-carrying versatility . The seatbacks fold down easily by pulling nylon tabs between the seatbacks and the bolsters. When the seats are folded down, they provide a continuous, nearly flat extension of the load floor .
Always place car go evenly on the car go floor . Put heavier objects as low and as far forward as possible. Place as much car go as possible in fr ont of the r ear axle. T oo much weight or improperly placed weight over or behind the rear axle can cause the rear of the vehicle to sway .
REAR WINDOW FEA TURES Rear Window Defroster The rear window defroster button is located on the climate control (Mode) knob. Press this button to turn on the rear window defroster and the heated outside mirrors (if equipped). An indicator in the button will illuminate when the rear window defroster is on.
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 INSTRUMENT P ANEL FEA TURES .......... .208 䡵 INSTRUMENT CLUSTER ................ .209 䡵 INSTRUMENT CLUSTER DESCRIPTIONS .... .210 䡵 MINI-TRIP COMPUTER — IF EQUIPPED .... .224 ▫ Control Buttons .
䡵 SETTING THE ANALOG CLOCK .......... .240 䡵 Uconnect® 730N/430/430N CD/DVD/HDD/ NA V — IF EQUIPPED .................. .240 ▫ Operating Instructions (V oice Command System) — If Equipped ................ .240 ▫ Operating Instructions (Uconnect® Phone) — If Equipped .
▫ Controlling The iPod® Or External USB Device Using Radio Buttons ............. .268 ▫ Play Mode ......................... .269 ▫ List Or Browse Mode .................. .270 ▫ Bluetooth Streaming Audio (BTSA) ........ .272 䡵 STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED .
INSTRUMENT P ANEL FEA TURES 1 — Air Outlet 6 — Radio 1 1 — Storage Compartment 2 — Side W indow Demister Outlet 7 — Passenger Airbag 12 — Climate Control 3 — Instrument Cluster 8 — Glo.
INSTRUMENT CLUSTER 4 UNDERST ANDING YOUR INSTRUMENT P ANEL 209 I n f o r m a t i o n P r o v i d e d b y :.
INSTRUMENT CLUSTER DESCRIPTIONS 1. T emperatur e Gauge The temperatur e gauge shows engine coolant tempera- ture. Any reading below the red mark of the gauge shows that the engine cooling system is operating properly .
4. Speedometer Indicates the vehicle speed in miles per hour (MPH) and kilometers per hour (km/h). 5. Low Fuel Light When the fuel level dr ops to appr oximately 2.0 gallons (7.6 Liters), the fuel symbol will light and a single chime will sound. NOTE: This light will remain on until a minimum of approximately 3.
8. Seat Belt Reminder Light When the ignition switch is first turned to ON/ RUN, this light will turn on for four to eight seconds as a bulb check. During the bulb check, if the driver’s seat belt is unbuckled, a chime will sound.
If the light turns on while driving, safely pull over and stop the vehicle. If the A/C system is on, turn it off. Also, shift the transmission into NEUTRAL and idle the ve- hicle. If the temperature reading does not return to normal, turn the engine off immediately and call for service.
V ehicles equipped with Anti-Lock brakes (ABS), are also equipped with Electronic Brake Force Distribution (EBD). In the event of an EBD failure, the Brake W arning Light will turn on along with the ABS Light. Immediate repair to the ABS system is required.
U.S. Federal r egulations r equire that upon transfer of vehicle ownership, the seller certify to the purchaser the correct mileage that the vehicle has been driven. If your odometer needs to be repaired or serviced, the repair technician should leave the odometer r eading the same as it was befor e the repair or service.
LoW tirE When the appropriate condition exists, the odometer dis- play will toggle between LoW and tirE for three cycles. HOTOIL When this message is displayed there is a engine oil over-temperatur e condition. When this condition occurs, the “HOTOIL” message will be displayed in the odometer along with a chime.
Unless reset, this message will continue to display each time you turn the ignition switch to the “ON” position. T o turn off the message temporarily , press and release the T rip Odometer button on the instrument cluster .
17. Electronic Throttle Control (ETC) Indicator Light This light informs you of a problem with the Electronic Throttle Contr ol (ETC) system. If a problem is detected, the light will come on while the engine is r unning.
21. Front Fog Light Indicator — If Equipped This indicator will illuminate when the front fog lights are on. 22. V ehicle Security Light — If Equipped This light will flash rapidly for approximately 16 seconds when the alarm system is arming. The light will begin to flash slowly indicating that the system is armed.
24. Electronic Stability Control (ESC) Activation/ Malfunction Indicator Light — If Equipped The “ESC Activation/Malfunction Indicator Light” in the instrument cluster will come on when the ignition switch is turned to the ON/RUN position. It should go out with the engine running.
As an added safety featur e, your vehicle has been equipped with a T ire Pressur e Monitoring System (TPMS) that illuminates a low tire pressur e telltale when one or more of your tires is significantly under-inflated.
CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style.
CAUTION! Prolonged driving with the Malfunction Indicator Light (MIL) on could cause damage to the engine control system. It also could affect fuel economy and drivability . If the MIL is flashing, severe catalytic converter damage and power loss will soon occur .
W ARNING! If you continue operating the vehicle when the T ransmission T emperature W arning Light is illumi- nated you could cause the fluid to boil over , come in contact with hot engine or exhaust components and cause a fire. 28. High Beam Indicator This light indicates that the headlights are on high beam.
Control Buttons STEP Button Press the STEP button located on the steering wheel to scroll through sub menus (i.e., T emperature, T rip Func- tions: Odometer , T rip A, T rip B). RESET Button T o reset the display shown, turn the ignition switch to the ON position, then press and hold the RESET button located on the steering wheel.
T rip A Shows the total distance traveled for T rip A since the last reset. T rip B Shows the total distance traveled for T rip B since the last reset. ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) — IF EQUIPPED The Electronic V ehicle Information Center (EVIC) fea- tures a driver-interactive display that is located in the instrument cluster .
• Miles T o Empty • Low T ire Information (T ire Pressure Monitor System (TPMS) Displays) — if equipped • T imer • Units • System W arnings (Door Ajar , etc.
MENU Button Press and r elease the MENU button to advance the display to each of the EVIC Main Menu features. Upon reaching the last item in the Main Menu the EVIC will advance to the first item in the Main Menu with the next MENU button pr ess and release.
• RKE (Remote Keyless Entry) Battery Low (with a single chime) • Personal Settings Not A vail – V ehicle Not In P ARK • Personal Settings Not A vail – V ehicle in Motion • Door Ajar (with vehicle graphic showing which door is open. A single chime sounds if the vehicle is in motion).
Oil Change Required — If Equipped Y our vehicle is equipped with an engine oil change indicator system. The Oil Change Required message will flash in the EVIC display for approximately five seconds after a single chime has sounded to indicate the next scheduled oil change interval.
ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) Main Menu T o step to each main menu feature press and release the MENU button once for each step. A step from the last item in the list will cause the first item in the feature list to be displayed.
Compass Display COMP ASS Button The compass heading indicates the direction the vehicle is facing. Press and release the compass button to display one of eight com- pass headings, the outside temperature, and audio information (if the radio is on) if the EVIC display is not already displaying this screen.
Manual Compass Calibration If the compass appears erratic or inaccurate, and the variance has been properly set, you may wish to manu- ally recalibrate the compass. T o manually calibrate the compass: 1. Start the engine. Leave the shift lever in P ARK in or der to enter the EVIC Programming Menus.
NOTE: Magnetic and battery powered devices, (such as cell phones, iPod’s, radar detectors, PDA’s and laptops) should be kept away from the top of the instrument panel. This is where the compass module is located and such devices may interfere and cause false compass readings.
.
• If the T ire Pressure System requir es service, ⬙ Check TPM System ⬙ is displayed. T ir e PSI is an information only function and cannot be reset. Elapsed Time Shows the total elapsed time of travel since the last reset. Elapsed time will increment when the ignition switch is in the RUN or ST ART position.
Personal Settings (Customer-Programmable Features) Personal Settings allows the driver to set and recall features when the automatic transaxle is in P ARK.
Sound Horn with Lock When ON is selected, a short horn sound will occur when the RKE transmitter LOCK button is pressed. This feature may be selected with or without the Flash Lamp with Lock feature. T o make your selection, press and release the SELECT button until ON or OFF appears.
Key-Off Power Delay When this feature is selected, the power window switches, radio, Uconnect® phone (if equipped), and power outlets will remain active for up to 10 minutes after the ignition switch is turned to the LOCK position. Opening either front vehicle door will cancel this feature.
SETTING THE ANALOG CLOCK T o set the analog clock, located at the top center of the instrument panel, press and hold the button in until the setting is correct.
Uconnect® 130 Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Pr ess the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection.
Setting the T one, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display . T urn the TUNE/SCROLL control knob to the right or left to increase or decrease the bass tones. Push the r otary TUNE/SCROLL control knob a second time and MID will display .
Y ou may add a second station to each pushbutton by repeating the above procedur e with this exception: Press the SET/RND button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM and 12 FM stations to be stor ed into pushbutton memory .
If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number , and index time in minutes and seconds. Play will begin at the start of track 1.
the current selection. Pressing and holding the SEEK button will allow faster scrolling thr ough the tracks in CD and MP3 modes. TIME Button Press this button to change the display from a large CD playing time display to a small CD playing time display .
Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CDDA, CD-R, CD-R W , MP3, and CDDA+MP3. Supported Medium Formats (File Systems) The medium formats supported by the radio ar e ISO 9660 Level 1 and Level 2 and includes the Joliet extension.
Discs cr eated with an option such as ⬙ keep disc open after writing ⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
Uconnect® 130 WITH SA TELLITE RADIO Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio.
SEEK Buttons Press and release the SEEK buttons to search for the next listenable station in AM/FM mode. Pr ess the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection.
Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL contr ol knob to set the minutes.
Setting the T one, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display . T urn the TUNE/SCROLL control knob to the right or left to increase or decrease the bass tones. Push the r otary TUNE/SCROLL control knob a second time and MID will display .
T oggle the MUSIC TYPE button to select the following format types: Program T ype 16-Digit Character Display No program type or undefined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls R.
By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name.
The stations stored in SET 2 memory can be selected by pressing the pushbutton twice. Every time a preset button is used, a corresponding button number will display . Button s1-6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations).
If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc. The display will show the track number , and index time in minutes and seconds. Play will begin at the start of track 1.
SEEK Button Press the right SEEK button for the next selection on the CD. Press the left SEEK button to return to the beginning of the current selection, or return to the beginning of the previous selection if the CD is within the first second of the current selection.
Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CDDA, CD-R, CD-R W , MP3, and CDDA+MP3. Supported Medium Formats (File Systems) The medium formats supported by the radio ar e ISO 9660 Level 1 and Level 2 and includes the Joliet extension.
Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files.
Press and hold the INFO button for three seconds or more and the radio will display song titles for each file. Press and hold the INFO button again for three seconds to return to ⬙ elapsed time ⬙ display .
System Activation Sirius Satellite Radio service is pre-activated, and you may begin listening immediately to the one year of audio service that is included with the factory-installed satellite radio system in your vehicle. Sirius will supply a wel- come kit that contains general information, including how to setup your on-line listening account.
Satellite Antenna T o ensure optimum reception, do not place items on the roof around the r ooftop antenna location. Metal objects placed within the line of sight of the antenna will cause decreased performance. Larger luggage items such as bikes should be placed as far rearward as possible, within the loading design of the rack.
SCAN Button Pressing the SCAN button causes the tuner to search for the next channel, pausing for eight seconds before con- tinuing to the next. T o stop the search, press the SCAN button a second time. INFO Button Pressing the INFO button will cycle the display informa- tion between Artist, Song T itle, and Composer (if avail- able).
SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number . This number is used to activate, deactivate, or change the Sirius subscription.
iPod®/USB/MP3 CONTROL — IF EQUIPPED This featur e allows an iPod® or external USB device to be plugged into the USB port, located in the center of the instrument panel below the climate controls. iPod® contr ol supports Mini, 4G, Photo, Nano, 5G iPod® and iPhone® devices.
Once the audio device is connected and synchronized to the vehicle’s iPod®/USB/MP3 control system (iPod® or external USB device may take a few minutes to connect), the audio device starts charging and is ready for use by pressing radio switches, as described below .
Play Mode When switched to iPod®/USB/MP3 control mode, the iPod® or external USB device automatically starts Play mode. In Play mode, the following buttons on the radio faceplate may be used to control the iPod® or external USB device and display data: • Use the TUNE control knob to select the next or previous track.
• Pressing the REPEA T button will change the audio device mode to repeat the current playing track or press the VR button and say ⬙ Repeat ON ⬙ or ⬙ Repeat Off ⬙ . • Press the SCAN button to use iPod®/USB/MP3 de- vice scan mode, which will play the first 10 seconds of each track in the current list and then forward to the next song.
• During all List modes, the iPod® displays all lists in “wrap-around” mode. So if the track is at the bottom of the list, just turn the wheel backward (counter- clockwise) to get to the track faster . • In List mode, the radio PRESET buttons are used as shortcuts to the following lists on the iPod® or external USB device.
CAUTION! • Leaving the iPod® or external USB device (or any supported device) anywhere in the vehicle in ex- treme heat or cold can alter the operation or dam- age the device.
Selecting A Different Audio Device 1. Press the PHONE button to begin. 2. After the ⬙ Ready ⬙ prompt and following the beep, say ⬙ Setup ⬙ , then say ⬙ Select Audio Devices ⬙ . 3. Say the name of the audio device or ask the Uconnect® phone system to list the audio devices.
STEERING WHEEL AUDIO CONTROLS — IF EQUIPPED The remote sound system controls ar e located on the r ear surface of the steering wheel, at the three and nine o’clock positions. The right-hand rocker switch has a pushbutton in the center , and controls the volume and mode of the sound system.
Radio Operation Pressing the top of the switch will SEEK up for the next listenable station, and pressing the bottom of the switch will SEEK down for the next listenable station. The button located in the center of the left-hand switch will tune to the next preset station that you have pro- grammed in the radio preset pushbutton.
NOTE: If you experience difficulty in playing a particular disc, it may be damaged (i.e., scratched, r eflective coating removed, a hair , moisture or dew on the disc) oversized, or have protection encoding. T ry a known good disc before considering disc player service.
The Manual T emperature Controls consist of a series of outer rotary dials and inner push knobs. Blower Control Rotate this control to r egulate the amount of air forced through the ven- tilation system in any mode. The blower speed increases as you move the contr ol to the right fr om the “O” (OFF) position.
Mode Control (Air Direction) Rotate this control to choose fr om sev- eral patterns of air distribution. Y ou can select either a primary mode as identified by the symbols on the con- trol, or a blend of two of these modes. The closer the setting is to a particular symbol, the more air distribution you receive from that mode.
• Mix Air is directed thr ough the floor , defr ost, and side window demist outlets. This setting works best in cold or snowy conditions that r equire extra heat to the windshield. This setting is good for maintaining comfort while reducing moisture on the windshield.
• The A/C will engage automatically to prevent fogging when the recirculation button is pressed and the mode control is set to panel or Bi-Level. • Recirculated air is not allowed in Defrost modes. If the Recirculation button is pressed while in Defr ost mode, the LED indicator will flash several times then go out.
• ECONOMY MODE If economy mode is desired, press the A/C button to turn OFF the indicator light and the A/C compressor . Then, move the temperature control to the desired temperature.
Y ou will experience the greatest effi- ciency by simply allowing the system to function automatically . Selecting the “O” (OFF) position on the blower con- trol stops the system completely and closes the outside air intake. 72°F (22°C) is the recommended setting for maximum comfort for the average person; however , this may vary .
Blower Control For full automatic operation or for automatic blower operation, turn the knob to the AUT O position. In manual mode there are seven blower speeds that can be individual selected.
284 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :.
The operator can override the AUTO mode setting to change airflow distribution by r otating the Mode Control knob (on the right) to one of the following positions. • Panel Air is directed through the outlets in the instru- ment panel. These outlets can be adjusted to dir ect airflow .
• Defrost Air is directed thr ough the windshield and side window demist outlets. Use this mode with maxi- mum blower and temperature settings for best wind- shield and side window defrosting. • Air Conditioner Control Press this button to turn on the air conditioning during manual operation only .
• Extended use of recir culation may cause the windows to fog. If the interior of the windows begins to fog, press the Recirculation button to r eturn to outside air . Some temp/humidity conditions will cause captured interior air to condense on windows and hamper visibility .
W inter Operation Use of the air Recirculation Mode during winter months is not r ecommended because it may cause window fogging. V acation Storage Anytime you store your vehicle, or keep it out of service (i.
Side Window Demisters A side window demister outlet is located at each end of the instrument panel. These non-adjustable outlets direct air toward the side windows when the system is in the FLOOR, MIX, or DEFROST mode. The air is directed at the area of the windows through which you view the outside mirrors.
Control Setting Suggestions for V arious W eather Conditions 290 UNDERST ANDING YOUR INSTRUMENT P ANEL I n f o r m a t i o n P r o v i d e d b y :.
ST ARTING AND OPERA TING CONTENTS 䡵 ST AR TING PROCEDURES ............... .296 ▫ Automatic T ransmission ............... .296 ▫ Normal Starting ...................... .297 ▫ Extreme Cold W eather (Below –20°F Or −29°C) ............... .298 ▫ If Engine Fails T o Start .
䡵 DRIVING ON SLIPPER Y SURF ACES ........ .320 ▫ Acceleration ........................ .320 ▫ T raction ........................... .321 䡵 DRIVING THROUGH W A TER ............ .321 ▫ Flowing/Rising W ater ................. .321 ▫ Shallow Standing W ater .
▫ Summer Or Three Season T ires – If Equipped . .351 ▫ Snow T ires ......................... .351 ▫ Spare T ire Matching Original Equipped T ire And Wheel – If Equipped ............... .352 ▫ Compact Spare T ir e – If Equipped ........ .
䡵 FLEXIBLE FUEL (3.6L ENGINE ONL Y) — IF EQUIPPED .......................... .373 ▫ E-85 General Information .............. .373 ▫ Ethanol Fuel (E-85) ................... .375 ▫ Fuel Requirements ................... .375 ▫ Selection Of Engine Oil For Flexible Fuel V ehicles (E-85) And Gasoline V ehicles .
▫ T owing T ips ........................ .390 䡵 RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) ........... .392 ▫ T owing This V ehicle Behind Another V ehicle .
ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instruct all other occupants to buckle their seat belts. W ARNING! • When leaving the vehicle, always remove the key fob from the ignition and lock your vehicle.
CAUTION! (Continued) • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Before shifting into any gear , make sure your foot is firmly on the brake pedal.
Extreme Cold Weather (Below –20°F Or −29°C) T o ensure reliable starting at these temperatures, use of an externally powered electric engine block heater (avail- able from your authorized dealer) is recommended.
CAUTION! T o prevent damage to the starter , do not crank the engine for more than 15 seconds at a time. W ait 10 to 15 seconds before trying again. If the engine is flooded, it may start to run, but not have enough power to continue running when the key is released.
After Starting The idle speed is controlled automatically and it will decrease as the engine warms up. ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms the engine, and permits quicker starts in cold weather . Connect the cord to a standard 1 10-1 15 V olt AC electrical outlet with a grounded, three-wir e extension cord.
AUTOMA TIC TRANSMISSION CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
W ARNING! (Continued) • Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, always apply the parking brake, shift the transmission into P ARK, turn the engine OFF , and remove the ignition key .
Key Ignition Park Interlock This vehicle is equipped with a Key Ignition Park Inter- lock which requir es the shift lever to be placed in P ARK before the ignition switch can be turned to the LOCK/ OFF position.
Gear Ranges DO NOT race the engine when shifting from P ARK or NEUTRAL into another gear range. NOTE: After selecting any gear range, wait a moment to allow the selected gear to engage before accelerating. This is especially important when the engine is cold.
W ARNING! (Continued) • It is dangerous to shift out of P ARK or NEUTRAL if the engine speed is higher than idle speed. If your foot is not firmly pressing the brake pedal, the vehicle could accelerate quickly forward or in re- verse. Y ou could lose control of the vehicle and hit someone or something.
CAUTION! • Before moving the shift lever out of P ARK, you must turn the ignition switch from the OFF posi- tion to the ON/RUN position, and also press the brake pedal. Otherwise, damage to the shift lever could result. • DO NOT race the engine when shifting from P ARK or NEUTRAL into another gear range, as this can damage the drivetrain.
W ARNING! Do not coast in NEUTRAL and never turn off the ignition to coast down a hill. These are unsafe practices that limit your response to changing traffic or road conditions.
If the transmission temperatur e exceeds normal operat- ing limits, the powertrain controller will modify the DRIVE and “3” range shift points. This is done to pr event transmission damage due to overheating.
T ransmission Limp Home Mode T ransmission function is monitored electronically for abnormal conditions. If a condition is detected that could result in transmission damage, T ransmission Limp Home Mode is activated. In this mode, the transmission r emains in thir d gear r egardless of which forward gear is selected.
Overdrive Operation The automatic transmission includes an electronically controlled Over drive (fourth gear). The transmission will automatically shift into Over drive if the following con- ditions a.
Six-Speed Automatic T ransmission (62TE) — If Equipped The shift lever position display (located in the instr ument cluster) indicates the transmission gear range. Y ou must press the brake pedal to move the shift lever out of P ARK (refer to “Brake/T ransmission Shift Interlock System” in this section).
Drive position) will manually select the transmission gear , and will display the current gear in the instrument cluster as 6, 5, 4, 3, 2, 1. Gear Ranges DO NOT race the engine when shifting from P ARK or NEUTRAL into another gear range. NOTE: After selecting any gear range, wait a moment to allow the selected gear to engage before accelerating.
When parking on a hill, apply the parking brake before placing the shift lever in P ARK, otherwise the load on the transmission locking mechanism may make it difficult to move the shift lever out of P ARK. As an added precau- tion, turn the front wheels towar d the curb on a downhill grade and away from the curb on an uphill grade.
W ARNING! (Continued) • When leaving the vehicle, always remove the igni- tion key from the ignition and lock your vehicle. Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons.
• Look at the shift lever position display and verify that it indicates the P ARK position. • W ith brake pedal released, verify that the shift lever will not move out of P ARK. REVERSE This range is for moving the vehicle backward. Shift into REVERSE only after the vehicle has come to a complete stop.
DRIVE This range should be used for most city and highway driving. It provides the smoothest upshifts and down- shifts, and the best fuel economy . The transmission automatically upshifts through underdrive first, second, third, and fourth gears, direct fifth gear and overdrive sixth gear .
P ARK, REVERSE, and NEUTRAL will continue to oper- ate. The Malfunction Indicator Light (MIL) may be illu- minated. Limp Home Mode allows the vehicle to be driven to an authorized dealer for service without dam- aging the transmission.
• the engine coolant has reached an adequate temperature, • vehicle speed is sufficiently high, and • the driver is not heavily pressing the accelerator . T orque Converter Clutch A feature designed to improve fuel economy has been included in the automatic transmission on your vehicle.
Operation When the shift lever is in the AutoStick® position (below the DRIVE position), it can be moved from side to side. This allows the driver to manually select the transmission gear being used. Moving the shift lever to the left (-) triggers a downshift and to the right (+) an upshift.
• If the system detects a problem, it will disable AutoStick® mode and the transmission will return to automatic mode until the problem is corrected. T o disengage AutoStick® mode, return the shift lever to the DRIVE position. Y ou can shift in or out of the AutoStick® position at any time without taking your foot off the accelerator pedal.
T raction When driving on wet or slushy roads, it is possible for a wedge of water to build up between the tire and road surface. This is hydr oplaning and may cause partial or complete loss of vehicle control and stopping ability . T o reduce this possibility , the following precautions should be observed: 1.
Shallow Standing W ater Although your vehicle is capable of driving through shallow standing water , consider the following Caution and W arning before doing so.
W ARNING! • Driving through standing water limits your vehi- cle’ s traction capabilities. Do not exceed 5 mph (8 km/h) when driving through standing water . • Driving through standing water limits your vehi- cle’ s braking capabilities, which increases stopping distances.
• Upon initial start-up in cold weather , the power steer- ing pump may make noise for a short amount of time. This is due to the cold, thick fluid in the steering system. This noise should be consider ed normal, and it does not in any way damage the steering system.
The parking brake lever is located in the center console. T o apply the parking brake, pull the lever up as firmly as possible. T o release the parking brake, pull the lever up slightly , press the center button, then lower the lever completely .
W ARNING! (Continued) • Never leave children alone in a vehicle, or with access to an unlocked vehicle. Allowing children to be in a vehicle unattended is dangerous for a number of reasons. A child or others could be seriously or fatally injured. Children should be warned not to touch the parking brake, brake pedal or the shift lever .
ANTI-LOCK BRAKE SYSTEM (ABS) The Anti-Lock Brake System (ABS) provides increased vehicle stability and brake performance under most braking conditions. The system operates with a separate computer to modulate the hydraulic pressur e to prevent wheel lock-up and avoid skidding on slippery surfaces.
The “Anti-Lock Brake W arning Light” moni- tors the Anti-Lock Brake System. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds.
Y ou also may experience the following when the brake system goes into anti-lock: • The ABS motor running (it may continue to run for a short time after the stop), • the clicking sound of solenoid valves, • brake pedal pulsations, • and a slight drop or fall away of the brake pedal at the end of the stop.
Anti-Lock Brake System (ABS) This system aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraulic brake pressur e to prevent wheel lock-up and help avoid skidding on slippery surfaces during braking.
Brake Assist System (BAS) The BAS is designed to optimize the vehicle’s braking capability during emergency braking maneuvers. The system detects an emergency braking situation by sens- ing the rate and amount of brake application and then applies optimum pressur e to the brakes.
Electronic Stability Control (ESC) This system enhances directional control and stability of the vehicle under various driving conditions. ESC cor- rects for over/under steering of the vehicle by applying the brake of the appropriate wheel to assist in counter- acting the over/under steer condition.
ESC Operating Modes All ESC equipped vehicles can choose the following ESC operating modes: ESC On This is the normal operating mode for ESC. Whenever the vehicle is started the ESC system will be in this mode. This mode should be used for almost all driving situa- tions.
T o turn ESC on again, momentarily press the “ESC Off” switch. This will restor e the normal “ESC On” mode of operation. W ARNING! When in “Partial Off” mode, the TCS functionality of ESC (except for the limited slip feature described in the TCS section) has been disabled and the “ESC Of f Indicator Light” will be illuminated.
The “ESC Activation/Malfunction Indicator Light” (lo- cated in the instrument cluster) starts to flash as soon as the tir es lose traction and the ESC system becomes active. The “ESC Activation/Malfunction Indicator Light” also flashes when TCS is active.
TIRE SAFETY INFORMA TION Tire Markings NOTE: • P (Passenger) - Metric tire sizing is based on U.S. design standards. P-Metric tires have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tire sizing is based on European design standards.
• T emporary spare tires are spares designed for tempo- rary emergency use only . T emporary high pressure compact spare tires have the letter “T” or “S” molded into the sidewall preceding the size designation. Ex- ample: T145/80D18 103M. • High flotation tire sizing is based on U.
EXAMPLE: 65 = Aspect ratio in percent (%) — Ratio of section height to section width of tire 10.5 = Section width in inches (in) R = Construction code — ⬙ R ⬙ means radial construction — ⬙.
EXAMPLE: H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should only be achieved under specified operating conditions (i.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ir es with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire.
EXAMPLE: DOT MA L9 ABCD 0301 01 = Number representing the year in which the tire was manufactured (two digits) — 01 means the year 2001 — Prior to July 2000, tire manufacturers were only requir ed to have one number to repr esent the year in which the tire was manufactured.
T erm Definition Maximum Inflation Pressure The maximum inflation pressure is the maximum permissible cold tire inflation pressur e for this tire. The maximum inflation pressur e is molded into the sidewall. Recommended Cold T ire Inflation Pressure V ehicle manufacturer’s recommended cold tire inflation pressur e as shown on the tire placard.
Tire Loading And Tire Pressure T ire And Loading Information Placard Location NOTE: The proper cold tire inflation pressur e is listed on the driver ’s side B-Pillar or the rear edge of the driver’s side door .
3) tire size designed for your vehicle 4) cold tire inflation pressures for the front, rear , and spare tires. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle.
4. The resulting figure equals the available amount of cargo and luggage load capacity . For example, if “XXX” amount equals 1,400 lbs (635 kg) and there will be five 150 lb (68 kg) passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]).
346 ST ARTING AND OPERA TING I n f o r m a t i o n P r o v i d e d b y :.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
.
At least once a month: • Check and adjust tire pressure with a good quality pocket-type pressure gauge. Do not make a visual judgement when determining proper inflation. T ires may look properly inflated even when they ar e under- inflated. • Inspect tires for signs of tire wear or visible damage.
T ire Pressures For High Speed Operation The manufacturer advocates driving at safe speeds and within posted speed limits. Where speed limits or condi- tions are such that the vehicle can be driven at high speeds, maintaining correct tire inflation pressur e is very important.
Consult an authorized tire dealer for tire repairs and additional information. Damaged Run Flat tires, or Run Flat tires that have experienced a loss of pressure should be replaced imme- diately with another Run Flat tire of identical size and service description (Load Index and Speed Code).
If you need snow tires, select tires equivalent in size and type to the original equipment tires. Use snow tires only in sets of four; failure to do so may adversely affect the safety and handling of your vehicle.
T , S = T emporary Spare T ir e Since this tire has limited tr ead life the original equip- ment tire should be repair ed (or replaced) and r einstalled on your vehicle at the first opportunity .
Limited-Use Spare – If Equipped The limited-use spare tire is for temporary emergency use only . This tire is identified by a label located on the limited-use spare wheel. This label contains the driving limitations for this spare. This tire may look like the original equipped tire on the front or rear axle of your vehicle, but it is not.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one.
These indicators are molded into the bottom of the tread grooves. They will appear as bands when the tread depth becomes 1/16 in (2 mm). When the tread is worn to the tread wear indicators, the tire should be replaced. Refer to replacement tires in this section for further information.
Replacement Tires The tires on your new vehicle provide a balance of many characteristics. They should be inspected regularly for wear and correct cold tire inflation pressur e. The manu- facturer strongly recommends that you use tires equiva- lent to the originals in size, quality and performance when replacement is needed.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle.
TIRE ROT A TION RECOMMENDA TIONS The tires on the front and rear of your vehicle operate at differ ent loads and perform different steering, driving, and braking functions. For these reasons, they wear at unequal rates. These effects can be reduced by timely rotation of tires.
TIRE PRESSURE MONITOR SYSTEM (TPMS) The T ir e Pressur e Monitor System (TPMS) will warn the driver of a low tire pressur e based on the vehicle recom- mended cold placard pressur e. The tire pr essure will vary with temperature by about 1 psi (7 kPa) for every 12°F (6.
For example, your vehicle may have a recommended cold (parked for more than three hours) placard pressur e of 30 psi (207 kPa). If the ambient temperature is 68°F (20°C) and the measured tir e pressur e is 27 psi (186 kPa), a temperature drop to 20°F (-7°C) will decr ease the tire pressur e to approximately 23 psi (158 kPa).
NOTE: • The TPMS is not intended to replace normal tire care and maintenance, or to provide warning of a tire failure or condition. • The TPMS should not be used as a tire pressure gauge while adjusting your tire pressure. • Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure.
T ire Pressure Monitoring Low Pressure W arnings The “T ire Pressure Monitoring T elltale Light” will illuminate in the instrument cluster , a ⬙ LOW TIRE ⬙ message will be displayed for a minimum of five seconds and a chime will sound when tire pressur e is low in one or more of the four active r oad tires.
4. Using tire chains on the vehicle. 5. Using wheels/tires not equipped with TPM sensors. NOTE: 1. The compact spare tire (if equipped) does not have a tire pressur e monitoring sensor . Therefor e, the TPMS will not monitor the pressur e in the compact spare tire.
Premium System – If Equipped The T ir e Pressur e Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pressure levels. Sensors, mounted to each wheel as part of the valve stem, transmit tire pressur e readings to the Receiver Module.
Should this occur , you should stop as soon as possible, and inflate all tires with low pressure (those flashing in the EVIC graphic) to the vehicle’s recommended cold placard pressure value.
The EVIC will also display a ⬙ CHECK TPM SYSTEM ⬙ message for a minimum of five seconds when a system fault related to an incorrect sensor location fault is detected. In this case, the ⬙ CHECK TPM SYSTEM ⬙ mes- sage is then followed with a graphic display with pres- sure values still shown.
4. For each subsequent ignition key cycle, a chime will sound, the “T ir e Pressur e Monitoring T elltale Light” will flash on and off for 75 seconds and then remain on solid, and the EVIC will display a ⬙ CHECK TPM SYSTEM ⬙ message for a minimum of five seconds and then display dashes (- -) in place of the pressur e value.
FUEL REQUIREMENTS This engine is designed to meet all emis- sions regulations and provide excellent fuel economy and performance when using high-quality unleaded “regular” gasoline having an octane rating of 87. The use of premium gasoline is not recommended, as it will not provide any benefit over regular gasoline in these engines.
Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxy- genates such as Ethanol. Fuels blended with oxygenates may be used in your vehicle. CAUTION! DO NOT use gasoline containing Methanol or gaso- line containing more than 10% Ethanol.
T o fix a Non-FFV vehicle inadvertently fueled once with E-85 perform the following: • drain the fuel tank (see your authorized dealer) • change the engine oil and oil filter • disconnect and reconnect the battery to reset the engine controller memory More extensive repairs will be required for prolonged exposure to E-85 fuel.
Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle’s performance: • The use of leaded gas is prohibited by Federal law .
Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: • Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas, which can kill.
subjects that are unique to these vehicles. Please refer to the other sections of this manual for information on features that are common between Flexible Fuel and gasoline-only powered vehicles. CAUTION! Only vehicles with the E-85 fuel filler door label can operate on E-85.
Ethanol Fuel (E-85) E-85 is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. W ARNING! Ethanol vapors are extremely flammable and could cause serious personal injury . Never have any smok- ing materials lit in or near the vehicle when remov- ing the fuel filler tube cap (gas cap) or filling the tank.
• Some additives used in regular gasoline are not fully compatible with E-85 and may form deposits in your engine. T o eliminate driveability issues that may be caused by these deposits, a supplemental gasoline additive, such as MOP AR® Injector Cleanup or T echr on may be used.
Replacement Parts Many components in your Flexible Fuel V ehicle (FFV) ar e designed to be compatible with ethanol. Always be sure that your vehicle is serviced with corr ect ethanol com- patible parts. CAUTION! Replacing fuel system components with non-ethanol compatible components can damage your vehicle.
After removing the gas cap, place the gas cap tether cable over a hook on the inside of the fuel door . This keeps the gas cap suspended away from and protects the vehicle’s surface. NOTE: If the gas cap is lost or damaged, be sure the replacement cap is for use with this vehicle.
W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank is being filled. • Never add fuel when the engine is running. This is in violation of most state and federal fire regula- tions and doing so may cause the MIL to turn on.
VEHICLE LOADING V ehicle Certification Label Y our vehicle has a V ehicle Certification Label affixed to the drivers side “B” Pillar or the rear of the driver ’s door .
Overloading The load carrying components (axle, springs, tir es, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and the front and rear GA WR. The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for operation.
T o maintain warranty coverage, follow the requir ements and recommendations in this manual concerning ve- hicles used for trailer towing. Common T owing Definitions The following trailer towing r ela.
Gross Axle W eight Rating (GA WR) The GA WR is the maximum capacity of the front and rear axles. Distribute the load over the front and rear axles evenly . Make sure that you do not exceed either fr ont or rear GA WR. Refer to “V ehicle Loading/V ehicle Certification La- bel” in “Starting and Operating” for further information.
W eight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle. These kinds of hitches are the most popular on the market today and they are commonly used to tow small- and medium- sized trailers.
T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/T ransmission Max. Frontal Area Max. Gross T railer Wt. (GTW) Max. T railer T ongue Wt.
T railer And T ongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle.
NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or dealer-installed options must be considered as part of the total load on your vehicle.
W ARNING! (Continued) • When hauling cargo or towing a trailer , do not overload your vehicle or trailer . Overloading can cause a loss of control, poor performance, or dam- age to brakes, axle, engine, transmission, steering, suspension, chassis structure, or tires.
T owing Requirements – T ires • Do not attempt to tow a trailer while using a compact spare tire. • Proper tire inflation pressur es are essential to the safe and satisfactory operation of your vehicle. Refer to “T ir es – General Information” in “Starting and Oper- ating” for proper tire inflation procedures.
CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes and they should be of adequate capacity . Failure to do this could lead to accelerated brake lining wear , higher brake pedal effort, and longer stopping distances.
NOTE: Using a lower gear while operating the vehicle under heavy loading conditions, will improve perfor- mance and extend transmission life by reducing exces- sive shifting and heat build-up.
Cooling System T o reduce potential for engine and transmission over- heating, take the following actions: City Driving When stopped for short periods of time, shift the trans- mission into NEUTRAL and increase engine idle speed. Highway Driving Reduce speed.
Recreational T owing – All Models Recreational towing is allowed ONL Y if the front wheels are OFF the ground. This may be accomplished using a tow dolly or vehicle trailer . If using a tow dolly , follow this procedure: 1. Properly secure the dolly to the tow vehicle, following the dolly manufacturer’s instructions.
I n f o r m a t i o n P r o v i d e d b y :.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 HAZARD W ARNING FLASHERS .......... .396 䡵 IF YOUR ENGINE OVERHEA TS ........... .396 ▫ Engine Oil Overheating (2.4L Engine Only) — If Equipped ......................... .397 䡵 JACKING AND TIRE CHANGING .
HAZARD W ARNING FLASHERS The Hazard W arning flasher switch is located on the instrument panel, below the radio. Press the switch to turn on the Hazar d W arning flasher . When the switch is activated, all direc- tional turn signals will flash on and of f to warn oncoming traffic of an emergency .
NOTE: There are steps that you can take to slow down an impending overheat condition: • If your air conditioner (A/C) is on, turn it off. The A/C system adds heat to the engine cooling system and turning the A/C off can help remove this heat.
JACKING AND TIRE CHANGING W ARNING! • Do not attempt to change a tire on the side of the vehicle close to moving traffic. Pull far enough off the road to avoid the danger of being hit when operating the jack or changing the wheel. • Being under a jacked-up vehicle is dangerous.
Spare T ire Removal Lift up the load floor cover and remove the hold down. Preparations For Jacking 1. Park the vehicle on a firm, level surface. A void ice or slippery areas.
6. Block both the front and rear of the wheel diagonally opposite the jack- ing position. For example, if chang- ing the right front tir e, block the left rear wheel. NOTE: Passengers should not remain in the vehicle while the vehicle is being jacked.
W ARNING! (Continued) • If working on or near a roadway , be extremely careful of motor traffic. • T o assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground.
NOTE: The jack handle attaches to the side of the jack with two attachment points. When the jack is partially expanded, the tension between the two attachment points holds the jack handle in place. 2. Loosen, but do not remove, the wheel nuts by turning them to the left one turn while the wheel is still on the ground.
3. There is a front and rear jacking location on each side of the vehicle. The plastic trim has been cut away to expose the jacking locations on the body .
4. T urn the jack screw to the left until the jack can be placed under the jacking location. Once the jack is positioned, turn the jack screw to the right until the jack head is properly engaged to the jacking location on the wheel to be changed. Do not raise the vehicle until you are sure the jack is securely engaged.
W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip off the jack and hurt someone near it. Raise the vehicle only enough to remove the tire. 5. Raise the vehicle by turning the jack screw to the right, using the swivel wrench.
CAUTION! Be sure to mount the spare tire with the valve stem facing outward. The vehicle could be damaged if the spare tire is mounted incorrectly . W ARNING! • T o avoid the risk of forcing the vehicle off the jack, do not tighten the lug nuts fully until the vehicle has been lowered.
9. Remove the wheel blocks and lower the jack until it is free. Release the emergency brake before driving the vehicle. Reassemble the lug wrench to the jack assem- bly and stow it in the spare tire area.
3. Align the valve notch in the wheel cover with the valve stem on the wheel. Install the cover by hand, snapping the cover over the two lug nuts. Do not use a hammer or excessive force to install the cover . 4. Install the remaining lug nuts with the cone shaped end of the nut toward the wheel.
6. Finish tightening the lug nuts. Push down on the wrench while at the end of the handle for increased leverage. T ighten the lug nuts in a star pattern until each nut has been tightened twice. The correct tight- ness of each lug nut is 100 ft/lbs (135 N·m).
5. After 25 miles (40 km) check the lug nut torque with a torque wrench to ensure that all lug nuts are pr operly seated against the wheel. JUMP-ST ARTING If your vehicle has a discharged battery it can be jump- started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack.
W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is ON. Y ou can be injured by moving fan blades. • Remove any metal jewelry such as rings, watch bands and bracelets that could make an inadvertent electrical contact.
3. Remove the protective cover over the remote posi- tive (+) battery post. T o remove the cover , press the locking tab and pull upward on the cover . 4. If using another vehicle to jump-start the battery , park the vehicle within the jumper cables reach, set the parking brake and make sure the ignition is OFF .
CAUTION! Failure to follow these procedures could result in damage to the charging system of the booster vehicle or the discharged vehicle. 1. Connect the positive (+) end of the jumper cable to the remote positive (+) post of the discharged vehicle. 2.
7. Disconnect the negative end (-) of the jumper cable from the negative (-) post of the booster battery . 8. Disconnect the opposite end of the positive (+) jumper cable from the positive (+) post of the booster battery . 9. Disconnect the positive (+) end of the jumper cable from the remote positive (+) post of the discharged vehicle.
CAUTION! Racing the engine or spinning the wheels may lead to transmission overheating and failure. Allow the en- gine to idle with the transmission in NEUTRAL for at least one minute after every five rocking-motion cycles. This will minimize overheating and reduce the risk of transmission failure during prolonged efforts to free a stuck vehicle.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause damage, or even failure, of the axle and tires. A tire could explode and injure someone.
TOWING A DISABLED VEHICLE This section describes procedures for towing a disabled vehicle using a towing service. T owing Condition Wheels OFF the Ground All Models Flat T ow NONE If transmission is o.
CAUTION! • Do not use sling type equipment when towing. Damage to the fascia will occur . • When securing the vehicle to a flatbed truck, do not attach to front or rear suspension components. Dam- age to your vehicle may result from improper towing.
CAUTION! T owing faster than 25 mph (40 km/h) or farther than 15 mi (24 km) with front wheels on the ground can cause severe transmission damage. Such damage is not covered by the New V ehicle Limited W arranty . Without The Ignition Key Special care must be taken when the vehicle is towed with the ignition in the LOCK/OFF position.
I n f o r m a t i o n P r o v i d e d b y :.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 ENGINE COMP AR TMENT — 2.4L ......... .423 䡵 ENGINE COMP AR TMENT — 3.6L ......... .424 䡵 ONBOARD DIAGNOSTIC SYSTEM — OBD II . .425 ▫ Loose Fuel Filler Cap Message ........... .425 䡵 EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS .
▫ Cooling System ..................... .442 ▫ Brake System ....................... .448 ▫ Automatic T ransmission ............... .450 ▫ Appearance Care And Protection From Corrosion .......................... .454 ▫ Cleaning Center Console Cupholders .
ENGINE COMP ARTMENT — 2.4L 1 — Engine Coolant Reservoir 6 — Air Cleaner Filter 2 — Power Steering Fluid Reservoir 7 — Engine Oil Fill 3 — Brake Fluid Reservoir 8 — Coolant Pressure Cap 4.
ENGINE COMP ARTMENT — 3.6L 1 — Engine Coolant Reservoir 5 — Air Cleaner Filter 2 — Power Steering Fluid Reservoir 6 — Engine Oil Dipstick 3 — Brake Fluid Reservoir 7 — Engine Oil Fill 4 .
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
.
4. Approximately 15 seconds later , one of two things will happen: • The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn OFF the ignition or start the engine. This means that your vehicle’s OBD II system is not ready and you should not proceed to the I/M station.
DEALER SERVICE Y our authorized dealer has the qualified service personnel, special tools, and equipment to perform all service opera- tions in an expert manner . Service Manuals are available which include detailed service information for your vehicle.
CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance inter- vals. Do not use chemical flushes in these compo- nents as the chemicals can damage your engine, transmission, power steering or air conditioning.
CAUTION! Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Also, be sure the oil fill cap is replaced and tightened after adding oil.
CAUTION! Do not use chemical flushes in your engine oil as the chemicals can damage your engine. Such damage is not covered by the New V ehicle Limited W arranty . Engine Oil V iscosity – 2.4L Engine SAE 5W -20 engine oil is recommended for all operating temperatures.
Materials Added T o Engine Oil The manufacturer strongly recommends against the ad- dition of any additives (other than leak detection dyes) to the engine oil. Engine oil is an engineered product and its performance may be impaired by supplemental addi- tives.
Engine Air Cleaner Filter Refer to the “Maintenance Schedule” for the proper maintenance intervals. W ARNING! The air induction system (air cleaner , hoses, etc.) can provide a measure of protection in the case of engine backfire. Do not remove the air induction system (air cleaner , hoses, etc.
T o access the battery , turn the steering wheel fully to the right and remove the inner fender shield. W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Do not allow battery fluid to contact your eyes, skin, or clothing.
Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an authorized dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test.
Refrigerant Recovery And Recycling R-134a Air Conditioning Refrigerant is a hydrofluoro- carbon (HFC) that is endorsed by the Environmental Protection Agency and is an ozone-saving product.
3. Disconnect the glove box door dampener from the slot on the side of the box. This is done by grasping the dampener connector (on the outside of the box) and the end of the connector pin (on the inside of the box) with your thumb and forefinger and pulling outward while lightly lifting upward on the door with your other hand.
7. Install the A/C Air Filter with the arrow on the filter pointing toward the floor . When installing the filter cover , make sure the retaining tabs fully engage the cover . CAUTION! The A/C air filter is identified with an arrow to indicate airflow direction through the filter .
Windshield Wiper Blades Clean the rubber edges of the wiper blades and the windshield periodically with a sponge or soft cloth and a mild nonabrasive cleaner . This will remove accumula- tions of salt or road film. Operation of the wipers on dry glass for long periods may cause deterioration of the wiper blades.
W ARNING! Commercially available windshield washer solvents are flammable. They could ignite and burn you. Care must be exercised when filling or working around the washer solution. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a pr operly maintained engine exhaust system.
CAUTION! • The catalytic converter requires the use of un- leaded fuel only . Leaded gasoline will destroy the effectiveness of the catalyst as an emissions control device and may seriously reduce engine perfor- mance and cause serious damage to the engine.
T o minimize the possibility of catalytic converter dam- age: • Do not shut off the engine or interrupt the ignition, when the transmission is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle.
Coolant Checks Check engine coolant (antifreeze) protection every 12 months (befor e the onset of freezing weather , where applicable). If the engine coolant (antifr eeze) is dirty or rusty in appearance, the system should be drained, flushed, and refilled with fresh engine coolant (anti- freeze).
CAUTION! (Continued) coolant (antifreeze) is introduced into the cooling system in an emergency , it should be flushed with OA T coolant and replaced with the specified OA T engine coolant (antifreeze) as soon as possible. • Do not use water alone or alcohol-based engine coolant (antifreeze) products.
• Mix a minimum solution of 50% OA T engine coolant that meets the requirements of Chrysler Material Stan- dard MS-12106 and distilled water . Use higher concen- trations (not to exceed 70%) if temperatures below −34° F (−37° C) are anticipated.
W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety precaution. Never add engine coolant (antifreeze) when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pres- sure to build up in the cooling system.
Six-Cylinder Engines – the level of the engine coolant (antifreeze) in the pr essurized coolant bottle should be between the “COLD” and “FULL” range on the bottle when the engine is cold.
• If frequent engine coolant (antifreeze) additions are requir ed, the cooling system should be pressur e tested for leaks. • Maintain engine coolant (antifreeze) concentration at a minimum of 50% OA T coolant (conforming to MS-12106) and distilled water for proper corrosion protection of your engine which contains aluminum components.
Master Cylinder – Brake Fluid Level Check Check the fluid level in the master cylinder immediately if the brake system warning light indicates system failure. Check the fluid level in the master cylinder when per- forming underhood services. Clean the top of the master cylinder area before removing the cap.
W ARNING! (Continued) • T o avoid contamination from foreign matter or moisture, use only new brake fluid or fluid that has been in a tightly closed container . Keep the master cylinder reservoir cap secured at all times. Brake fluid in a open container absorbs moisture from the air resulting in a lower boiling point.
CAUTION! Using a transmission fluid other than the manufac- turer’s recommended fluid may cause deterioration in transmission shift quality and/or torque converter shudder . Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for fluid speci- fications.
3. Fully apply the parking brake, and press the brake pedal. 4. Place the shift lever momentarily into each gear posi- tion (allowing time for the transmission to fully en- gage in each position), ending with the shift lever in P ARK. 5. W ipe the area around the dipstick clean to pr event dirt from entering the transmission.
T o prevent dirt and water from entering the transmission after checking or replenishing fluid, make sure that the dipstick cap is properly reseated. CAUTION! • Using a transmission fluid other than.
Appearance Care And Protection From Corrosion Protection Of Body And Paint From Corrosion V ehicle body care r equirements vary according to geo- graphic locations and usage.
• If insects, tar , or other similar deposits have accumu- lated on your vehicle, use MOP AR® Super Kleen Bug and T ar Remover to remove. • Use a high quality cleaner wax, such as MOP AR® Cleaner W ax to remove r oad film, stains and to protect your paint finish.
• If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sur e that such materials are well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone shields behind each wheel. • Use MOP AR® T ouch Up Paint on scratches as soon as possible.
T o minimize the possibility of scratching the lenses and reducing light output, avoid wiping with a dry cloth. T o remove road dirt, wash with a mild soap solution fol- lowed by rinsing. Do not use abrasive cleaning components, solvents, steel wool or other aggressive material to clean the lenses.
Cleaning Interior T rim Interior T rim should be cleaned starting with a damp cloth, a damp cloth with MOP AR® T otal Clean or equiva- lent, then MOP AR® Spot & Stain Remover or equivalent if absolutely necessary . Do not use harsh cleaners or Armor All®.
When cleaning the rear view mirror , spray cleaner on the towel or rag that you are using. Do not spray cleaner directly on the mirror . Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instruments in this vehicle are molded in clear plastic.
Rinse the liner thoroughly under warm running water . Shake the excess water from the liner and dry the outer surfaces with a clean soft cloth. Installation Align the liner in the cupholder and press down firmly . FUSES Integrated Power Module The Integrated Power Module is located in the engine compartment near the air cleaner assembly .
Cav- ity Car- tridge Fuse Mini Fuse Description 1 40 Amp Green — Power T op Module – If Equipped 2 — 20 Amp Y ellow Brake V acuum Pump 3 — 10 Amp Red Center High Mounted Stop Light (CHMSL)/ Br.
Cav- ity Car- tridge Fuse Mini Fuse Description 14 — 10 Amp Red Instrument Panel 15 40 Amp Green — Radiator Fan Relay 16 — 15 Amp Lt. Blue Sunroof – If Equipped 17 — 10 Amp Red W ir eless Co.
Cav- ity Car- tridge Fuse Mini Fuse Description 26 — 15 Amp Lt. Blue Auto Shutdown (ASD) Relay 2 27 — 10 Amp Red Ignition Run – Occupant Classifica- tion Module (OCM)/ Occupant Restraint Control.
Cav- ity Car- tridge Fuse Mini Fuse Description 35 40 Amp Green — Anti-Lock Brakes (ABS) Module – If Equipped/Electronic Stability Control (ESC) Module – If Equipped 36 30 Amp Pink — Passenger.
VEHICLE STORAGE If you will not be using your vehicle for more than 21 days, you may want to take steps to preserve your battery . • Disengage the mini-fuse in the Power Distribution Center labeled IOD (Ignition Off-Draw). • Or disconnect the negative cable from the battery .
Exterior Bulbs Bulb Number Bi-Halogen Headlamp HIR2 Front T urn Signal Lamp 3157NAK Front Park Lamp LED (Serviced at Authorized Dealer) Front Fog Lamp H1 1 Center High Mounted Stop (CHMSL) Lamp LED (S.
3. Rotate bulb and connector one-quarter turn and pull outward from assembly . CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life.
4. Pull the bulb out of the socket and replace the bulb. 5. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 6. Reinsert the bulb and socket assembly and rotate clockwise one-quarter turn to secure. Front T urn Signal 1.
Front Fog Lamp NOTE: Access to the lamps through the lower fascia cutout is limited. W e r ecommend you access the lamps by turning the steering wheel to allow access and remove the inner fender shield. 1. Rotate the bulb’s electrical connector one-quarter turn counterclockwise and remove it from the fog lamp housing.
2. Remove the two plastic wing nuts from the tail lamp housing. NOTE: Placing a small flat head screwdriver or similar tool between the lamp outboard ball stud and plastic grommet from inside the trunk can help to disengage the outboard edge of the tail lamp.
4. T wist and remove socket from lamp. 5. Remove bulb from socket and replace. 6. Reinstall the tail lamp, fasteners, and trunk liner . License Plate Lamp 1. Using a small screwdriver , press inwar d the locking tab on the side of the lamp assembly and pull down on the lamp assembly for removal.
U.S. Metric Engine Oil W ith Filter 2.4L Engine (SAE 5W -20, API Certified) 4.5 Quarts 4.4 Liters 3.6L Engine (SAE 5W -20, API Certified) 6 Quarts 5.6 Liters Cooling System* 2.4L Engine (MOP AR® Antifreeze/ Engine Coolant 10 Y ear/ 150,000 Mile Formula or equivalent) 7.
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant W e recommend you use MOP AR® Antifreeze/Coolant 10 Y ear/ 150,000 Mile Formula OA T (Organic Additive T echnology).
Component Fluid, Lubricant, or Genuine Part Spark Plugs – 3.6L Engine W e recommend you use MOP AR® Spark Plugs (Gap 0.043 in [1.1 mm]). Fuel Selection 87 Octane * PZEV = Partial Zero Emission V eh.
MAINTENANCE SCHEDULES CONTENTS 䡵 MAINTENANCE SCHEDULE ............ .476 ▫ Maintenance Chart .................... .478 8 M A I N T E N A N C E S C H E D U L E S I n f o r m a t i o n P r o v i d e .
MAINTENANCE SCHEDULE Y our vehicle is equipped with an automatic oil change indicator system. The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Based on engine operation conditions, the oil change indicator message will illuminate.
Once A Month Or Before A Long T rip: • Check engine oil level • Check windshield washer fluid level • Check the tire inflation pressur es and look for unusual wear or damage • Check the fluid .
Maintenance Chart Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 Or Y ears: 2 3 4 5 6 7 8 9 10 .
Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 Or Y ears: 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 Or Kilometers: 32,000 48,000 64,000 80,000 96,000 1 12,000 128,000 144,000 160,000 176,000 192,000 208,000 224,000 240,000 Replace spark plugs (2.
Mileage or time passed (whichever comes first) 20,000 30,000 40,000 50,000 60,000 70,000 80,000 90,000 100,000 1 10,000 120,000 130,000 140,000 150,000 Or Y ears: 2 3 4 5 6 7 8 9 10 1 1 12 13 14 15 Or.
W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent me- chanic.
I n f o r m a t i o n P r o v i d e d b y :.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 SUGGESTIONS FOR OBT AINING SER VICE FOR YOUR VEHICLE .................. .485 ▫ Prepare For The Appointment ............ .485 ▫ Prepare A List ....................... .485 ▫ Be Reasonable W ith Requests .
䡵 DEP AR TMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES ........ .491 ▫ T readwear .......................... .492 ▫ T raction Grades ....
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you are having warranty work done, be sure to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty .
W arranty service must be done by an authorized dealer. W e strongly recommend that you take the vehicle to an authorized dealer. They know your vehicle the best, and are most concerned that you get pr ompt and high quality service.
Chrysler Canada Inc. Customer Center P .O. Box 1621 W indsor , Ontario N9A 4H6 Phone: (800) 465–2001 English / (800) 387–9983 French In Mexico contact: A v .
Service Contract Y ou may have purchased a service contract for a vehicle to help protect you from the high cost of unexpected repairs after the manufacturer’s New V ehicle Limited W arranty expires. The manufacturer stands behind only the manufacturer’s service contracts.
W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, chemicals known to the State of California to cause cancer and birth defects, or other reproductive harm.
campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer, and the manufacturer . T o contact NHTSA, you may either call the Auto Safety Hotline toll free at 1–888–327–4236 (TTY : 1–800–424–9153), or go to http://www .
Diagnostic Procedure Manuals Diagnostic Procedur e Manuals are filled with diagrams, charts and detailed illustrations. These practical manuals make it easy for students and technicians to find and fix problems on computer-contr olled vehicle systems and features.
T readwear The T readwear grade is a comparative rating, based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100.
T emperature Grades The temperature grades are A (the highest), B, and C, repr esenting the tire’s resistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel.
I n f o r m a t i o n P r o v i d e d b y :.
INDEX 10 I n f o r m a t i o n P r o v i d e d b y :.
About Y our Brakes ....................... .324 ABS (Anti-Lock Brake System) ............... .327 Adding Engine Coolant (Antifreeze) ........... .444 Adding Fuel ............................ .377 Adding W asher Fluid ..................... .439 Additives, Fuel .
Automatic T ransmission ................... .301 Adding Fluid ......................... .451 Fluid and Filter Changes ................. .453 Fluid Level Check ...................... .451 Fluid T ype ........................... .450 Gear Ranges .......
Cellular Phone ........................... 1 1 1 Certification Label ........................ .380 Chains, T ire ............................ .358 Changing A Flat T ire ...................... .398 Chart, T ire Sizing ........................ .337 Check Engine Light (Malfunction Indicator Light) .
Pressur e Cap ......................... .445 Radiator Cap ......................... .445 Selection of Coolant (Antifreeze) ............ .443 Corrosion Protection ...................... .454 Crankcase V entilation Module ................. 2 1 Cruise Light .
Emergency , In Case of Jacking .............................. .398 Jump Starting ......................... .410 T owing ............................. .417 Emergency T runk Release .................... 4 2 Emission Control System Maintenance ......... .
Fabric Care ............................. .457 Filler Location Fuel ....................... .210 Filters Air Cleaner .......................... .433 Air Conditioning ...................... .289 Engine Oil ........................... .432 Engine Oil Disposal .
Filler Door (Gas Cap) ................... .210 Gasoline ............................. .369 Gauge .............................. .210 Light ................................ 2 1 1 Materials Added ....................... .371 Methanol ...................
Hazard W arning Flasher ................... .396 Headlights ............................. .466 Bulb Replacement ...................... .466 Cleaning ............................ .456 High Beam ........................... .168 High Beam/Low Beam Select Switch .
Interior Lights .......................... .170 Intermittent W ipers (Delay W ipers) ............ .173 Introduction .............................. 4 Jacking Instructions ....................... .400 Jack Location ........................... .398 Jack Operation .
Engine T emperature W arning .............. .212 Exterior ............................. .101 F o g ................................ .168 Headlights ........................... .166 Headlights On W ith W ipers ............... .176 Headlight Switch ....
Lubrication, Body ........................ .438 Lumbar Support ......................... .156 Maintenance Free Battery ................... .433 Maintenance Procedures ................... .428 Maintenance Schedule ..................... .476 Malfunction Indicator Light (Check Engine) .
Disposal ............................. .432 Filter ............................... .432 Filter Disposal ........................ .432 Identification Logo ..................... .430 Materials Added to ..................... .432 Recommendation .........
Pretensioners Seat Belts .............................. 5 4 Programmable Electronic Features ............ .237 Radial Ply T ir es ......................... .350 Radiator Cap (Coolant Pressure Cap) .......... .445 Radio Operation ......................
Safety Checks Inside V ehicle .................. 9 9 Safety Checks Outside V ehicle ............... .101 Safety Defects, Reporting ................... .489 Safety , Exhaust Gas ......................... 9 8 Safety Information, T ir e .................
Service Manuals ......................... .490 Settings, Personal ........................ .237 Setting the Clock ......................... .240 Shift Lever Override ...................... .416 Shoulder Belts ............................ 4 6 Side Airbag .
Theft System (Security Alarm) ................. 1 9 T ilt Steering Column ...................... .176 T ime Delay , Headlight ..................... .167 T ir e and Loading Information Placard .......... .343 T ir e Markings ...........................
デバイスChrysler 200 (2014)の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Chrysler 200 (2014)をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはChrysler 200 (2014)の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Chrysler 200 (2014)の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Chrysler 200 (2014)で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Chrysler 200 (2014)を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はChrysler 200 (2014)の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Chrysler 200 (2014)に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちChrysler 200 (2014)デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
