Chryslerメーカー2006 300の使用説明書/サービス説明書
ページ先へ移動 of 392
T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE ........................... 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ..............
.
INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual ................. 4 䡵 W arnings And Cautions .................. 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications / Alterations .
INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents.
INTRODUCTION 5 1.
W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es which could result in an accident or bodily injury . It also contains CAUTIONS against procedures which could result in damage to your vehicle. If you do not read this entir e manual you may miss important information.
VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death.
.
THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys ................. 1 1 ▫ Ignition Key Removal ................... 1 1 ▫ Key-In-Ignition Reminder ................ 1 2 ▫ Horn ............................... 1 2 䡵 Sentry Key .
▫ Power W indows ....................... 2 6 䡵 T runk Lock And Release .................. 2 9 䡵 T runk Safety W arning .................... 3 0 ▫ T runk Emergency Release ................ 3 1 䡵 Occupant Restraints ..................... 3 1 ▫ Lap/Shoulder Belts .
A WORD ABOUT YOUR KEYS Y ou can insert the double sided keys into the locks with either side up. The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your dealer .
vehicle information center (EVIC) — if equipped. Refer to Personal Settings in the Electronic V ehicle Information Center (EVIC) Section for details. W ARNING! Leaving children in a vehicle unattended is danger- ous for a number of reasons. A child or others could be injured.
The Sentry Key Immobilizer System does not need to be armed or activated. Operation of the system is automatic regar dless of whether or not the vehicle is locked or unlocked. During normal operation, the V ehicle Theft Alarm Indi- cator Light will come on for three (3) seconds immedi- ately after the ignition switch is turned on for a bulb check.
At the time of purchase, the original owner is pr ovided with a four digit PIN number . This number is requir ed for dealer replacement of keys. Duplication of keys may be performed at an authorized dealer or by using the Customer Key Programming pr ocedure.
General Information The Sentry Key system complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference that may be received, including interfer ence that may cause undes- ired operation.
W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. • When leaving the vehicle always remove the key from the ignition lock, and lock your vehicle.
Automatic Door Locks The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The Auto Lock featur e is enabled. 2. The transmission is in gear . 3. All doors are closed. 4. The throttle is pressed.
3. Depress the power door lock switch to lock the doors. 4. A single chime will indicate the completion of the programming. Auto Unlock The doors will unlock automatically on vehicles with power door locks if: 1. The Auto Unlock featur e is enabled. 2.
3. Depress the power door unlock switch to unlock the doors. 4. A single chime will indicate the completion of the programming. NOTE: Use the Auto Door Locks and Auto Unlock features in accor dance with local laws.
T o activate the system, open the rear door and move the child lock control, located near the door ’ s r ear latch, to the ON position. When the child lock system is engaged the door can be opened only by using the outside door handle even though the inside door lock is in the unlocked position.
T o unlock the doors: Press and r elease the UNLOCK button on the transmitter once to unlock the driver ’ s door , or twice to unlock all doors. The turn signal lights will flash twice to acknowl- edge the unlock signal. The illuminated entry system also turns on.
NOTE: Pressing the LOCK button on the keyfob while you are inside the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound.
• When you turn off the panic alarm by pr essing the P ANIC button a second time, you may have to be closer to the vehicle due to the radio frequency noises of the system. T o T urn Off “ Flash Lights On Lock/Unlock ” NOTE: The Flash Lights On Lock/Unlock feature can be turned on or off.
If your Remote Keyless Entry transmitter fails to operate from a normal distance, check for these two conditions. 1. A weak battery in the transmitter . The expected life of the battery is a minimum of three years. 2. Closeness to a radio transmitter such as a radio station tower , airport transmitter , and some mobile or CB radios.
VEHICLE THEFT ALARM — IF EQUIPPED The V ehicle Theft Alarm system monitors the vehicle doors for unauthorized entry and the ignition switch for unauthorized operation.
The V ehicle Theft Alarm system is designed to pr otect your vehicle, however , you can create conditions wher e the system will give you a false alarm. If one of the previously described arming sequences has occurr ed, the system will arm regar dless of whether you are in the vehicle or not.
The window lock switch on the driver ’ s door allows you to disable the window controls on the passenger doors. When the lock switch is pressed, the window contr ols on the passenger doors will not illuminate and the passen- ger windows will be disabled.
Auto Up Feature with Anti – Pinch Protection — If Equipped Lift the window switch to the second detent, release, and the window will go up automatically . T o stop the window from going all the way up during the auto-up operation, push down on the switch briefly .
Reset Any time the vehicle battery is disconnected or goes dead the auto-up function will be disabled. T o reactivate the auto-up feature perform the following steps after vehicle power is restor ed: 1. Pull the window switch up to close window com- pletely and continue to hold the switch up for an additional two seconds after the window is closed.
The trunk lid can be r eleased from outside the vehicle by pressing the tr unk button on the Remote Keyless Entry T ransmitter two times. W ith the ignition ON, the trunk open symbol will display in the instrument cluster indicating that the trunk is open.
T runk Emergency Release The trunk of your vehicle is equipped with an emer gency release handle. It is located on the inside of the tr unk lid, near the latch, and is coated so that it glows in a darkened trunk.
W ARNING! In a collision, you and your passengers can suffer much greater injuries if you are not properly buck- led up. Y ou can strike the interior of your vehicle or other passengers, or you can be thrown out of the vehicle. Always be sure you and others in your vehicle are buckled up properly .
W ARNING! • W earing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body . These are the strongest parts of your body and can take the forces of a collision the best. W earing your belt in the wrong place could make your injuries in a collision much worse.
W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well.
W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won ’ t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as pos- sible and keep it snug. • A twisted belt can ’ t do its job as well.
Adjustable Upper Shoulder Belt Anchorage In the driver and front passenger seats, the shoulder belt can be adjusted upward or downwar d to position the belt away from your neck. Push and fully depr ess the button above the webbing to release the anchorage, and then move it up or down to the position that serves you best.
are single use items. After a collision that is severe enough to deploy the airbags and pretensioners, both must be replaced. Enhanced Seat Belt Reminder System (BeltAlert) If the driver ’ s or fron.
The Enhanced W arning System (BeltAlert) can be reacti- vated by repeating this pr ocedure. NOTE: Although the Enhanced W arning System (BeltAlert) has been deactivated, the Seat Belt W arning Light will continue to illuminate while the driver ’ so r front passenger ’ s seat belt r emains unbuckled.
Driver and Right Front Passenger Supplemental Restraint System (SRS) - Airbag This vehicle has front airbags for both the driver and front passenger as a supplement to the seat belt r estraint systems. The driver ’ s airbag is mounted in the center of the steering wheel.
This vehicle may also be equipped with left and right side curtain airbags to protect the driver and passengers sitting next to a window . If the vehicle is equipped with side curtain airbags, they are located above the side windows. Their covers are also labeled SRS AIRBAG.
Along with the seat belts, front airbags work with the instrument panel knee bolsters to pr ovide improved protection for the driver and fr ont passenger . Side Cur- tain Airbags also work with seat belts to improve occu- pant protection. The seat belts are designed to pr otect you in many types of collisions.
2. Y ou should read the instructions provided with your child restraint to make sur e that you are using it properly . 3. All occupants should use their seat belts properly . 4. The driver and front passenger seats should be moved back as far as practical to allow the airbags time to inflate.
Air Bag System Components The airbag system consists of the following: • Occupant Restraint Controller • Airbag W arning Light • Driver Airbag • Passenger Airbag • Side Curtain Airbags above.
• Also, the ORC turns on the airbag warning light and P AD indicator light in the instru- ment panel for 6 to 8 seconds for a self-check when the ignition is first turned on.
The P AD indicator light should not be illuminated when teenagers, most children in a forwar d-facing child restraint or booster seats, most childr en that can properly wear the vehicle ’ s seat belt, and when an adult passenger is properly seated in the fr ont passen- ger seat.
The OCS classifies an occupant using weight sensors mounted in the base of the front passenger seat. Any weight on the seat will be sensed by the system. Objects hanging on the seat or other passengers pushing down on the seat will also be sensed. The weight of an adult will cause the system to turn the airbag on.
Indicator Light and the Airbag W arning Light. Once the lodged object is removed, the fault will be automatically cleared after a short period of time. • The Driver and Passenger Airbag/Inflator Units are located in the center of the steering wheel and the right side of the instrument panel.
milliseconds (about one quarter of the time it takes to blink your eyes) with enough force to injur e you if you are not belted and seated pr operly , or if items are positioned in the area wher e the side curtain airbag inflates. This especially applies to children.
W ARNING! Unapproved modifications or service procedures to the front passenger seat assembly , its related compo- nents, or seat cover may inadvertently change the airbag deployment in case of a frontal crash. This could result in death or serious injury to the front seat passenger if the vehicle is involved in an acci- dent.
• It is not advisable to drive your vehicle after the airbags have been deployed. If you are involved in another collision, the airbags will not be in place to protect you. W ARNING! Deployed airbags can ’ t protect you in another colli- sion. Have the airbags replaced by an authorized dealer as soon as possible.
Airbag Light Y ou will want to have the airbags ready to inflate for your protection in an impact. While the airbag system is designed to be mainte- nance free, if any of the following occurs, have an.
treated confidentially . Confidential data will not be dis- closed by DaimlerChrysler to any third party except when: 1. Used for resear ch purposes, such as to match data with a particular crash recor d in an aggregate database, provided confidentiality of personal data is ther eafter preserved 2.
W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a missile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured.
W ARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a collision. The child could be badly injured or killed. Follow the manufacturer ’ s directions ex- actly when installing an infant or child restraint.
Older Children and Child Restraints Children who weigh mor e than 20 lbs (9 kg) and who are older than one year can ride forward-facing in the vehicle. Forward-facing child seats and convertible child seats used in the forward-facing dir ection are for children who weigh 20 to 40 lbs (9 to 18 kg) and who are older than one year .
LA TCH-compatible child restraint systems ar e now avail- able. However , because the lower anchorages are to be introduced over a period of years, child r estraint systems having attachments for those anchorages will continue to also have features for installation using the vehicle ’ s seat belts.
The rear seat lower anchorages ar e round bars, located at the rear of the seat cushion wher e it meets the seat back. The location of the lower anchorages are identified by a symbol on the seat back. Y ou will easily feel them if you run your finger along the intersection of the seatback and seat cushion surfaces.
restraint installation, instead of tucking the seat belt behind the child restraint, r oute the seat belt through the child restraint belt path and then buckle it.
2. Route the tether strap to provide the most dir ect path for the strap between the anchor and the child seat. If your vehicle is equipped with adjustable rear head restraints, raise the head r estraint and, where possible, route the tether strap under the head r estraint and between the two posts.
ENGINE BREAK-IN RECOMMENDA TIONS A long break-in period is not r equired for the engine in your new vehicle. Drive moderately during the first 300 miles (500 km). After the initial 60 miles (100 km), speeds up to 50 or 55 mph (80 or 90 km/h) are desirable.
Safety Checks Y ou Should Make Inside The V ehicle Seat Belts Inspect the belt system periodically , checking for cuts, frays and loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system. Front seat belt assemblies must be r eplaced after a collision.
.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 6 7 ▫ Inside Day/Night Mirror ................. 6 7 ▫ Automatic Dimming Inside Mirror — If Equipped .......................... 6 7 ▫ Driver ’ s Side Outside Mirror Auto Dimmer — If Equipped .
▫ Power Seats .......................... 9 0 ▫ Power Reclining Seats ................... 9 1 ▫ Lumbar Support ....................... 9 2 ▫ Heated Seats — If Equipped .............. 9 2 ▫ Head Restraints ....................... 9 4 ▫ Folding Rear Seat .
▫ W indshield W ashers ................... 1 0 7 ▫ Rain Sensing W ipers — If Equipped ......... 1 0 7 ▫ Mist Feature ......................... 1 0 8 ▫ Headlights On W ith W ipers (A vailable W ith Auto Headlights Only) ...... 1 0 8 ▫ W indshield W iper Operation .
▫ Using HomeLink ..................... 1 2 7 ▫ Erasing HomeLink Buttons .............. 1 2 7 ▫ Reprogramming a Single HomeLink Button . . . 127 ▫ Security ............................ 1 2 8 䡵 Power Sunroof — If Equipped ............ 1 2 8 ▫ Opening Sunroof - Expr ess .
MIRRORS Inside Day/Night Mirror Adjust the mirror to center on the view thr ough the rear window . A two point pivot system allows for horizontal and vertical adjustment of the mirror . Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of vehicle).
CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean.
W ARNING! V ehicles and other objects seen in the right side convex mirror will look smaller and farther away than they really are. Relying too much on your right side mirror could cause you to collide with another vehicle or other object. Use your inside mirror when judging the size or distance of a vehicle seen in this convex mirror .
Illuminated V anity Mirrors — If Equipped An illuminated vanity mirror is on the sun visor . T o use the mirror , rotate the sun visor down and swing the mirror cover upwar d. The light turns on automatically . Closing the mirror cover turns of f the lights.
The UConnect ™ phonebook enables you to store up to 32 names and four numbers per name. Each language has a separate 32 name phonebook accessible only in that language. This system is driven through your Blue- tooth ™ Hands-Free pr ofile cellular phone.
system can either be adjusted from the radio volume control knob, or fr om the steering wheel radio control (right switch), if so equipped. The radio display will be used for visual prompts fr om the UConnect ™ system such as ⬙ CELL ⬙ or caller ID on certain radios.
Cancel Command At any prompt, after the voice on beep, you can say ⬙ Cancel ⬙ and you will be returned to the main menu. However , in a few instances the system will take you back to the previous menu.
• For identification purposes, you will be prompted to give the UConnect ™ system a name for your cellular phone. Each cellular phone that is paired should be given a unique phone name. • Y ou will then be asked to give your cellular phone a priority level between 1 and 7, 1 being the highest priority .
• After the ⬙ Ready ⬙ prompt and the following beep, say the name of the person you want to call. For example, you can say ⬙ John Doe, ⬙ where John Doe is a pr evi- ously stored name entry in the UConnect ™ phone- book. Refer to ⬙ Add Names to Y our UConnect ™ Phonebook, ⬙ to learn how to store a name in the phonebook.
• After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook Edit. ⬙ • Y ou will then be asked for the name of the phonebook entry that you wish to edit. • Next, choose the number designation (home, work, mobile, or pager) that you wish to edit.
Delete All Entries in the UConnect ™ Phonebook • Press the ’ Phone ’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Phonebook Erase All. ⬙ • The UConnect ™ system will ask you to verify that you wish to delete all the entries from the phonebook.
Answer or Reject an Incoming Call - Call Currently in Progress If a call is currently in pr ogress and you have another incoming call, you will hear the same network tones for call waiting that you normally hear when using your cell phone. Press the ’ Phone ’ button to place the curr ent call on hold and answer the incoming call.
established, press and hold the ’ Phone ’ button until you hear a double beep indicating that the two calls have been joined into one conference call.
• Continue to follow the system prompts to complete language selection. After selecting one of the languages, all prompts and voice commands will be in that language. NOTE: After every UConnect ™ language change op- eration, only the language specific 32 name phonebook is usable.
NOTE: The T owing Assistance number dialed is based on the Country where the vehicle is pur chased (1-800- 528-2069 for USA, 1-877-213-4525 for Canada, 55-14-3454 for Mexico city and 1-800-712-3040 for outside Mexico city in Mexico).
a ѧ , ⬙ you could press the ’ V oice Recognition ’ button and say ⬙ Pair a Phone ⬙ to select that option without having to listen to the rest of the voice pr ompt. T urning Confirmation Prompts On/Off T urning confirmation prompts of f will stop the system from confirming your choices (e.
• After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Mute. ⬙ In order to un-mute the UConnect ™ system: • Press the ’ V oice Recognition ’ button.
button and say “ Select ” or “ Delete. ” Also, see the next two sections for an alternate way to “ select ” or “ de- lete ” a paired phone. Select another Cellular Phone This feature allows you to select and start using another phone with the UConnect ™ system.
Things Y ou Should Know About Y our UConnect ™ System V oice Recognition (VR) • Always wait for the beep before speaking. • Speak normally , without pausing, just as you would speak to a person sitting approximately eight (8) feet away from you.
Far End Audio Performance • Audio quality is maximized under: • low-to-medium blower setting, • low-to-medium vehicle speed, • low road noise, • smooth road surface, • fully closed windows, and • dry weather condition. • Operation from driver seat.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 87 3.
88 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE.
UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 89 3.
North American English Primary Alternate(s) Zero Oh Add location Add new All All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing Pairing Phonebook Phone book Return to main menu Return.
W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehicle is parked.
Lumbar Support This feature allows you to incr ease or decrease the amount of lumbar support. T urn the control lever for - ward to incr ease and rearward to decr ease the desired amount of lumbar support.
Pressing the switch a second time will select low-level heating. Pressing the switch a thir d time will shut the heating elements off. When high-temperature heating is selected, the heaters provide a boosted heat level during the first four minutes of operation after heating is activated.
Head Restraints Head restraints can r educe the risk of whiplash injury in the event of impact from the r ear . Adjustable restraints should be adjusted so that the upper edge is as high as practical. The head restraints have a locking button which must be pushed in to lower the head restraint.
W ARNING! The cargo area in the rear of the vehicle (with the rear seatbacks in the locked-up or folded down position) should not be used as a play area by children when the vehicle is in motion. They could be seriously injured in an accident. Children should be seated and using the proper restraint system.
1. Adjust all memory profile settings to desired pr efer- ences (i.e. seat, side mirror , adjustable pedals [if equipped], power tilt and telescopic steering column [if equipped], and radio station presets). 2. Press and release the Set (S) button on the memory switch, then press the side of the r ocker switch labeled (1) within 5 seconds.
3. Press and release the Set (S) button on the memory switch, then press and r elease the side of the rocker switch labeled 1 or 2 accordingly . ⬙ Memory Profile Set ” (1 or 2) will display in the instrument cluster on vehicles equipped with the Electronic V ehicle Information Center (EVIC).
NOTE: The Easy Entry/Easy Exit feature is disabled when the vehicle is delivered fr om the factory . The Easy Entry/Easy Exit feature can be enabled or disabled through the pr ogrammable features in the Electronic V ehicle Information Center (EVIC).
• The pedals cannot be adjusted when the vehicle is in R (Reverse) or when the Speed Control is ON. One of the following message will display in the Electronic V e- hicle Information Center (EVIC) .
Next, move to the outside of the vehicle and push the safety catch to the left. The safety catch is located under the center front edge of the hood. Use the hood prop r od (if equipped) to secure the hood in the open position. T o prevent possible damage, do not slam the hood to close it.
Interior Lights The interior lights come on when a door is opened. T o protect the battery , the interior lights will turn off automatically 10 minutes after the ignition switch is moved to the LOCK position. This will occur if the interior lights were switched on manually or ar e on because a door is open.
odometer , Electronic V ehicle Information Center — if equipped, and radio when the parking lights or head- lights are on. Headlight Switch The headlight switch is located on the left side of the instrument panel.
Headlights, Parking Lights, Instrument Panel Lights Rotate the headlight switch clockwise to the first detent for parking light and instrument panel light operation. T urn to the second detent for headlight, park light and instrument panel light operation.
SmartBeams — If Equipped The SmartBeam system provides incr eased forward light- ing at night by automating high beam control thr ough the use of a digital camera mounted on the inside rearview mirr or .
Lights-on Reminder If the headlights or parking lights are on after the ignition is turned OFF , a chime will sound to alert the driver when the driver ’ s door is opened. Headlight Time Delay This feature pr ovides the safety of headlight illumination for 90 seconds (programmable) when leaving your ve- hicle in an unlighted area.
NOTE: The message “ T urn Signal On ” will appear in the electronic vehicle information center (EVIC) — if equipped, and a continuous chime will be heard when the vehicle has been driven more than 1 mile (1.
Windshield W ashers T o use the front washer , push the lever in and hold while spray is desired. If the lever is r eleased while in the delay range, the wiper will operate for two wipe cycles after the lever is released, and then r esume the intermittent inter- val previously selected.
• The rain sensing feature may not function pr operly when ice, or dried salt water is present on the wind- shield. • Use of Rain-X 威 or products containing wax or silicone may reduce rain sensor performance.
Windshield Wiper Operation Rotate the end of the lever to the second detent for Low speed wiper operation, or to the third detent for High speed operation. Intermittent Wiper System Use the intermittent wiper when weather conditions make a single wiping cycle, with a variable pause be- tween cycles, desirable.
Headlight W ashers — If Equipped This feature operates in combination with the windshield washers. T o use the headlight washers, turn the head- lights ON and press in on the windshield washer contr ol knob while the engine is running. This will operate the windshield washers and direct a timed high pressur e spray onto the headlight lens.
TIL T/TELESCOPING STEERING COLUMN Unlock the steering column by pulling out the handle located directly below the column. T o tilt the column move the steering wheel up or down as desired. T o lengthen or shorten the steering column pull out or push in the steering wheel.
POWER TIL T/TELESCOPING STEERING COLUMN — IF EQUIPPED The power tilt/telescoping steering column lever is lo- cated below the multi-function lever on the steering column. T o tilt the column move the lever up or down as desired. T o lengthen or shorten the steering column pull the lever toward you or push the lever away fr om you as desired.
TRACTION CONTROL SYSTEM (TCS) — IF EQUIPPED W ARNING! TCS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded. The TCS cannot prevent accidents, includ- ing those resulting from excessive speed in turns, or hydroplaning.
T o improve the vehicle ’ s traction when driving with snow chains, or starting off in deep snow , sand or gravel, switch off the TCS system by pr essing the traction control switch. T o turn the system back ON, press the traction contr ol switch a second time until the traction control Indicator turns OFF .
When the driver selects Reverse the system scans for objects behind the vehicle using four sensors located in the rear bumper . Objects can be detected from up to 71 inches (180 cm). A warning display above the rear window provides both visible and audible warnings indicating the range of the object.
NOTE: The Rear Park Assist System displays the outer most yellow LED ’ s at a slightly dimmer level to indicate that the system is ON. NOTE: When an audio tone is indicated by the Rear Park Assist display the system will MUTE the radio if it is turned on.
W ARNING! BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase braking efficiency beyond that af forded by the condition of the vehicle brakes and tires or the traction afforded.
The ESP enhances dir ectional control and reduces driving wheel spin of the vehicle under various driving condi- tions. The system operates when the vehicle speed is greater than 7.8 mph (12.6 km/h). The ESP system corr ects for over/understeering of the vehicle by applying brakes to the appropriate wheel.
wheel slip control is active at vehicle speeds between approximately 24 mph (40 km/h) and 50 mph (80 km/h). CAUTION! If the vehicle is towed with the front axle raised, the engine must be shut off (key in the ignition switch to the OFF/LOCK or ACC position).
T o Activate: Push and release the speed contr ol lever ( “ ON/ OFF ” ) once and the electronic speed contr ol indicator light in the instrument cluster will illuminate indicating that the electronic speed control is ON. T o turn the system OFF , Push and release the lever ( “ ON/OFF ” ) again and the system and indica- tor will turn off.
T o decrease speed while speed contr ol is set, push the lever down and hold ( “ COAST ” ). Release the lever when the desired speed is r eached, and the new speed will be set. Pushing down and releasing the lever ( “ COAST ” ) once will result in a 1 mph (2 km/h) speed decr ease.
OVERHEAD CONSOLE — IF EQUIPPED The overhead console contains courtesy/r eading lights, an optional universal garage door opener (HomeLink 威 ), storage for sunglasses, and an optional power sunroof switch. Courtesy/Reading Lights At the forward end of the console ar e two courtesy/ reading lights.
GARAGE DOOR OPENER — IF EQUIPPED The HomeLink 威 Universal T ransceiver replaces up to three r emote controls (hand held transmitters) that oper- ate devices such as garage door openers, motorized gates, or home lighting. It triggers these devices at the push of a button.
Programming HomeLink NOTE: When programming a garage door opener , it is advised to park outside the garage. It is also recom- mended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink for quicker training and accurate transmis- sion of the radio-frequency signal.
2. Position the end of your hand-held transmitter 1-3 inches (3-8 cm) away from the HomeLink buttons. 3. Simultaneously press and hold both the HomeLink button that you want to train and the hand-held trans- mitter buttons. Do not release the buttons until step 4 has been completed.
door opener may have a multiple security code system (rolling code system). Please pr oceed to steps 6 – 8t o complete the programming of a r olling code equipped device (most common garage door openers requir e this step. 6. At the garage door opener receiver (motor-head unit) in the garage, locate the ⬙ learn ⬙ or ⬙ smart ⬙ button.
3. Continue to press and hold the HomeLink button while you press and release every two seconds ( ⬙ cycle ⬙ ) your hand-held transmitter until the frequency signal has successfully been accepted by HomeLink. The EVIC display will show “ Channel X T rained ” (where X is Channel 1, 2, or 3).
Security If you sell your vehicle, be sure to erase the fr equencies by following the “ Erasing HomeLink Buttons ” instruc- tions in this section. This device complies with part 15 of FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference.
W ARNING! • Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may result in serious injury or death.
Pinch Protect Override If a known obstruction (ice, debris, etc.) pr events closing, press the switch forwar d and hold for two seconds after the reversal occurs. This allows the sunr oof to move towards the closed position. NOTE: Pinch protection is disabled while the switch is pressed.
Ignition Off Operation For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power sunroof switch will remain active for 10 minutes after the ignition switch is turned off. Opening either fr ont door will cancel this feature.
NOTE: If desired, the power outlet next to the ash receiver tray (if equipped) can be converted by your authorized dealer to provide power with the ignition switch in the LOCK position. The center console outlet is powered dir ectly from the battery (power available at all times).
Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle ’ s battery , even when not in use (i.e. cellular phones, etc.). Eventually , if plugged in long enough, the vehicle ’ s battery will discharge sufficiently to degrade battery life and/or prevent engine starting.
Front Seat Cup Holders — 300 T ouring and 300C Models The cup holders are located in the forwar d edge of the center console. Push down on the cover as shown to expose the cup holders.
STORAGE Console Features The center console contains a large storage bin. The storage bin contains a four-slot coin holder (designed to hold various size coins) and a rubber mat at the bottom of the bin for noise control. The bin is lar ge enough to hold a portable AC/DC converter to power laptops, games, or other electrical equipment.
• Always place cargo evenly on the car go floor . Put heavier objects as low and as far forward as possible. • Place as much cargo as possible in fr ont of the rear axle. T oo much weight or improperly placed weight over or behind the rear axle can cause the r ear of the vehicle to sway .
UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instruments And Controls ................ 1 4 0 䡵 Standard Instr ument Cluster .............. 1 4 1 䡵 Premium Instr ument Cluster .............. 1 4 2 䡵 Instrument Cluster Descriptions .........
▫ Operating Instructions - Radio Mode ....... 1 6 5 ▫ Operation Instructions - CD Mode ......... 1 6 8 ▫ Operation Instructions - Auxiliary Mode ..... 1 6 9 ▫ Operating Instructions - Hands Fr ee Phone — If Equipped .........................
▫ Selecting a Channel .................... 1 8 4 ▫ Storing And Selecting Pre-Set Channels ...... 1 8 5 ▫ Using The PTY (Pr ogram T ype) Button (If Equipped) ........................ 1 8 5 ▫ PTY Button ⬙ Scan ⬙ ..................... 1 8 5 ▫ PTY Button ⬙ Seek ⬙ .
INSTRUMENTS AND CONTROLS 140 UNDERST ANDING YOUR INSTRUMENT P ANEL.
ST ANDARD INSTRUMENT CLUSTER UNDERST ANDING YOUR INSTRUMENT P ANEL 141 4.
PREMIUM INSTRUMENT CLUSTER 142 UNDERST ANDING YOUR INSTRUMENT P ANEL.
INSTRUMENT CLUSTER DESCRIPTIONS 1. Electronic Speed Control Indicator Light — If Equipped This light will illuminate when the electr onic speed control is ON. 2. Low Fuel Indicator Light When the fuel level drops to 1/8 tank, the fuel symbol will light and a single chime will sound.
9. Anti-Lock Brake Light This light monitors the Anti-Lock Brake System. The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds.
The dual brake system provides a r eserve braking capac- ity in the event of a failure to a portion of the hydraulic system. Failure of either half of the dual brake system is indicated by the Brake W arning Light which will turn on when the brake fluid level in the master cylinder has dropped below a specified level.
13. Electronic Stability Program (ESP) Indicator Light/T raction Control System (TCS) Indicator Light — If Equipped If this indicator light flashes during accelera- tion, apply as little throttle as possible. While driving, ease up on the accelerator .
15. T rip Odometer Button T rip Odometer Button — Standard Cluster The word ⬙ TRIP ⬙ will appear when this button is pr essed. Push in and hold the button for two seconds when the trip odometer is displayed to reset it to 0 miles or kilometers. A second press of the button will display the outside temperature in the odometer .
21. Electronic Throttle Contr ol (ETC) Light This light informs you of a problem with the Electronic Thr ottle Control system. If a prob- lem is detected the light will come on while the engine is running. Cycle the ignition key when the vehicle has completely stopped and the gear selector is placed in the P ARK position.
Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver ’ s r esponsibility to maintain correct tir e pressure, even if under -inflation has not reached the level to trigger illumination of the TPMS low tire pr essure telltale.
ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC) The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display . It is located in the upper part of the cluster between the speedometer and tachometer . V ehicles equipped with steering wheel mounted buttons (described in this section) are also equipped with the EVIC.
Press the FUNCTION SELECT button to accept a selection. The FUNCTION SELECT button also advances the radio to the next preset station, changes the side of the tape being played (if so equipped), or changes the current CD track being played (if so equipped) when the EVIC is in the Compass/T emp/Audio screen.
• Memory System Disabled – V ehicle Not In Park (with a single chime) • Memory System Disabled – Seat Belt Buckled (with a single chime) • Personal Settings Not A vailable – V ehicle Not i.
• Check Gascap (refer to “ Adding Fuel ” in Section 5 of this manual for more details) • Service Park Assist System (with a single chime) T rip Functions Press and r elease the MENU button unt.
• When the DTE value is less than 30 miles (48 km) estimated driving distance, the DTE display will change to a text display of ⬙ LOW FUEL. ⬙ This display will continue until the vehicle runs out of fuel. Adding a significant amount of fuel to the vehicle will turn off the ⬙ LOW FUEL ⬙ text and a new DTE value will display .
Manual Compass Calibration If the compass appears erratic and the “ CAL ” message does not appear in the EVIC display , you must put the compass into the Calibration Mode manually as follows: T o put into a Calibration Mode: T urn on the ignition switch.
T o set the variance: T urn the ignition switch ON. Then, press and hold the compass button for appr oximately 2 seconds. Then, press the SCROLL button until “ Compass V ariance ” displays in the EVIC. Both the “ Compass V ariance ” message and the last variance zone number will display in the EVIC.
The EVIC displays this symbol to indicate that you have voice mail. The EVIC displays this symbol to indicate a text message. The EVIC displays this symbol to indicate the battery strength of the UConnect ™ phone. The EVIC displays this symbol to indicate that a phone connection has been made.
T urn By T urn Directions The EVIC displays turn-by-turn directions to a pr o- grammed destination when T urn by T urn Navigation is enabled through Personal Settings.
“ Remote Key Unlock ” When Driver Door 1st Press is selected, only the driver ’ s door will unlock on the first press of the r emote keyless entry unlock button. When Driver Door 1st Press is selected, you must press of the r emote keyless entry unlock button twice to unlock the passenger ’ s doors.
“ Delay Power Off to Accessories Until Exit ” When this feature is selected, the power window switches, radio, hands – free system (if equipped), DVD video system (if equipped), power sunroof (if equipped), and power outlets will remain active for up to 60 minutes after the ignition switch is turned off.
“ Rain Sensing Intermittent W ipers ”— If Equipped When ON is selected, the system will automatically activate the windshield wipers if it senses moisture on the windshield. T o make your selection, press and r elease the FUNCTION SELECT button until “ ON ” or “ OFF ” appears.
“ Headlights On W ith W ipers ” (A vailable with Auto Headlights Only) When ON is selected, and the headlight switch is in the AUTO position, the headlights will turn on appr oxi- mately 10 seconds after the wipers are turned on. The headlights will also turn off when the wipers ar e turned off if they wer e turned on by this feature.
RADIO GENERAL INFORMA TION Radio Broadcast Signals Y our new radio will provide excellent r eception under most operating conditions. Like any system, however , car radios have performance limitations, due to mobile op- eration and natural phenomena, which might lead you to believe your sound system is malfunctioning.
NOTE: For vehicles equipped with the Electronic V e- hicle Information Center (EVIC), the radio, steering wheel radio controls (if equipped), and 6 disc CD/DVD changer (if equipped) will remain active for up to 60 minutes after the ignition switch is turned off.
Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Press the ON/VOL control to turn the radio ON. Pr ess the ON/VOL a second time to turn OFF the radio.
equipped) frequencies, pausing for 5 seconds at each listenable station before continuing to the next. T o stop the search, pr ess SCAN a second time. PSCAN Button (Radio Mode) Pressing the PSCAN butt.
Press the r otary TUNE control a third time and TREB will be displayed. T urn the TUNE control to the right or left to increase or decr ease the T reble tones. Press the r otary TUNE control a fourth time and BAL will be displayed. T urn the TUNE control to the right or left to adjust the sound level from the right or left side speakers.
Operation Instructions - CD Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Inserting The Compact Disc (Single CD Player) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD Player and the CD icon will illuminate on the radio display .
TIME Button (CD Mode) Press this button to change the display fr om elapsed CD playing time to time of day . The time of day will be displayed for 5 seconds. R W/FF (CD Mode) Press and hold the FF (Fast Forwar d) and the CD player will begin to fast forward until FF is r eleased.
MUTE Button (Auxiliary Mode) Press the MUTE button to cancel the sound fr om the speakers. ⬙ MUTE ⬙ will be displayed. Press the MUTE button a second time and the sound from the speakers will return. Rotating the volume contr ol or turning OFF the ignition will also return the sound fr om the speakers.
SALES CODE RAK – AM/FM/CASSETTE/CD (6-DISC) RADIO WITH OPTIONAL SA TELLITE RADIO, HANDS FREE PHONE, VIDEO, MP3, and WMA CAP ABILITIES NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Instructions - Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio.
SEEK Button (Radio Mode) Press and r elease the SEEK button to search for the next station in either AM/FM or Satellite (if equipped) mode. Press the right side of the button to seek up and the left side to seek down. The radio will remained tuned to the new station until you make another selection.
R W/FF (Radio Mode) Pressing the r ewind/fast forward button causes the tuner to search for the next fr equency in the direction of the arrows. This featur e operates in either AM, FM or Satel- lite (if equipped) frequencies. TUNE Control (Radio Mode) T urn the right side rotary contr ol to increase or decrease the frequency .
T urn the tune knob to select the following format types: Program T ype 16 Digit-Character Dis- play No program type or un- defined None News News Information Information Sports Sports T alk T alk Roc.
Button s1-6 (Radio Mode) These buttons tune the Radio to the stations that you commit to push-button memory {12 AM, 12 FM, and 12 Satellite (if equipped) stations}.
Changing T ape Direction If you wish to change the direction of tape travel (side being played), press Pr eset 6. The lighted arrow in the display window will show the new direction. Metal T ape Selection If a standard metal tape is inserted into the player , the player will automatically select the correct equalization.
Inserting Compact Disc(s) CAUTION! This CD player will accept 4 3/4 inch (12 cm) discs only . The use of other sized discs may damage the CD player mechanism. Y ou may eject a disc with the radio OFF . If you insert a disc with the ignition ON and the radio ON, the unit will switch from radio to CD mode and begin to play when you insert the disc.
Press and hold the LOAD/EJT button for 5 seconds and all CDs will be ejected from the radio. If you have ejected a disc and have not removed it within 15 seconds, it will be reloaded. If the CD is not r emoved, the radio will continue to play the non-removed CD.
Press the RND button a second time to stop Random Play . Button s1-6( C DM O D Ef o rC D Audio Play) Selects disc position s1-6f o r Play/Load/Eject. Notes On Playing MP3 Files The radio can play MP3 files, however , acceptable MP3 file recor ding media and formats are limited.
Supported MP3 File Formats The radio will recognize only files with the *.mp3 exten- sion as MP3 files. Non-MP3 files named with the *.mp3 extension may cause playback problems. The radio is designed to recognize the file as an invalid MP3 and will not play the file.
T o increase the speed of disc loading, it is r ecommended to use CD-R media and single-session discs. T o create a single-session disc, enable the Disc at Once option before writing to the disc.
INFO Button (CD Mode for MP3 Play) Press and INFO button while playing MP3 or WMA disc. The radio scrolls thr ough the following T AG information: Song T itle, Artist, File Name, and Folder Name (if avail- able). Press the INFO button once mor e to return to ⬙ elapsed time ⬙ priority mode.
Operating Instructions - V ideo Entertainment System (VES) (If Equipped) Refer to separate “ V ideo Entertainment System (VES) Guide. ” SA TELLITE RADIO — IF EQUIPPED Satellite radio uses direct satellite to r eceiver broadcast- ing technology to provide clear digital sound, coast to coast.
ESN/SID Access W ith RAQ and RAK Radios W ith the ignition switch in the ACCESSOR Y position and the radio OFF , press the CD Eject and TIME buttons simultaneously for 3 seconds.
NOTE: Channels that may contain objectionable con- tent can be blocked. Contact Sirius Customer Care at 888-539-7474 to discuss options for channel blocking or unblocking.
Reception Quality Satellite reception may be interr upted due to one of the following reasons. • The vehicle is parked in an undergr ound parking structur e or under a physical obstacle. • Dense tree coverage may interr upt reception in the form of short audio mutes.
Raising The DVD Screen Remote Control Location UNDERST ANDING YOUR INSTRUMENT P ANEL 187 4.
NA VIGA TION SYSTEM (SALES CODE REC) — IF EQUIPPED NOTE: The radio sales code is located on the lower right side of your radio faceplate. Navigation Radio with CD Player and MP3 Capability (REC) - c.
REMOTE SOUND SYSTEM CONTROLS The remote sound system contr ols are located on the surface of the steering wheel at the 3 and 9 o ’ clock positions. V ehicles equipped with steering wheel mounted buttons are also equipped with the Electr onic V ehicle Information Center (EVIC).
When the EVIC is in the Compass/T emp/ Audio screen, pr ess the FUNCTION SELECT button to advance the radio to the next preset station, to change the side of the tape being played (if so equipped), or to change the cur- rent CD track being played (if so equipped).
Press either the top or bottom of the SCROLL button twice to listen to the second track on the CD, three times to listen to the third track, and so forth. Satellite Radio Operation Press the top of the SCROLL button once to SEEK the next listenable station up from the curr ent setting.
CD/DVD DISC MAINTENANCE T o keep the CD/DVD discs in good condition, take the following precautions: 1. Handle the disc by its edge; avoid touching the surface. 2. If the disc is stained, clean the surface with a soft cloth, wiping from center to edge.
The instrument panel featur es four dual-vane airflow registers. T wo r egisters are located on the outer ends of the instrument panel and two ar e located in the center of the instrument panel. These r egisters can be closed to partially block airflow .
Blower Control The rotary knob on the left contr ols the blower and can be set in one of four speeds and OFF . The blower fan mo- tor will remain on until the system is turned to the OFF position or the ignition is turned OFF . T emperature Control The temperature of air can be selected by rotating the temperatur e control knob in the center .
Defrost/Floor Air flows through the fr ont and rear floor outlets and the outlets at the base of the windshield. Air is also directed to the fr ont door windows through the side window demister grilles. Floor Air flows through the floor outlets located under the instrument panel and into the r ear seating area thr ough vents under the front seats.
Automatic T emperature Control — If Equipped The Infrared Dual-Zone Climate Contr ol System auto- matically maintains the interior comfort level desired by the driver and passenger . This is accomplished by a dual sun-sensor in the top of the instrument panel, and an infrared sensor located in the face of the contr ol unit.
Operation of the system is quite simple. Begin by turning the right mode knob to AUTO, and place the blower control (left knob) to either LO AUTO or HI AUTO. The LO AUTO position should be used for front seat occu- pants only . The HI AUT O position should be used when more air flow is desir ed, or when rear seat occupants are present.
• Most of the time, when in Automatic operation, you can temporarily put the system into recir culation mode by pressing the Recir c button. However , under certain conditions in automatic the system is blowing air out of the defrost vents.
UNDERST ANDING YOUR INSTRUMENT P ANEL 199 4.
The operator can override the AUTO mode setting and select the direction of the air by r otating the right mode knob to one of the following positions. • Defrost Air is directed to the windshield thr ough the outlets at the base of the windshield. Air is also directed to the fr ont door windows through the side window demister grilles.
the rear window defr oster is ON. The defroster automati- cally turns off after appr oximately 10 minutes of opera- tion for the first push of the button, and will turn off after approximately 5 minutes for the second push of the button.
Winter Operation Use of the air Recirculation mode during winter months is not recommended because it may cause window fogging. NOTE: See Operating T ips chart (for Manual A/C Control) at the end of this section for suggested contr ol settings in differ ent weather conditions.
Operating Tips UNDERST ANDING YOUR INSTRUMENT P ANEL 203 4.
.
ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 0 8 ▫ Normal Starting ...................... 2 0 8 䡵 Engine Block Heater — If Equipped ........ 2 1 0 䡵 T ransmission Shifting ................... 2 1 0 ▫ 4 Speed Automatic T ransmission .
▫ T ire Identification Number (TIN) .......... 2 3 8 ▫ T ire Loading And T ire Pressur e ........... 2 3 9 䡵 Ti re s — General Information ............... 2 4 3 ▫ T ire Pressur e ......................... 2 4 3 ▫ T ire Inflation Pressur es .
▫ Overloading ......................... 2 6 1 ▫ Loading ............................ 2 6 1 䡵 T railer T owing ........................ 2 6 2 ▫ Common T owing Definitions ............. 2 6 2 ▫ T railer Hitch Classification ............... 2 6 4 ▫ T railer T owing W eights (Maximum T railer W eight Ratings) .
ST ARTING PROCEDURES CAUTION! Long periods of engine idling, especially at high engine speeds, can cause excessive exhaust tempera- tures which can damage your vehicle.
W ARNING! • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transmission cannot be started this way . Un- burned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.
After Starting The idle speed will automatically decrease as the engine warms up. ENGINE BLOCK HEA TER — IF EQUIPPED The engine block heater warms engine coolant and permits quicker starts in cold weather . Connect the cord to a standard 1 10-1 15 volt AC electrical outlet with a grounded, thr ee-wire extension cord.
W ARNING! It is dangerous to shift the selector lever out of “ P ” or “ N ” if the engine speed is higher than idle speed. If your foot is not firmly on the brake pedal, the vehicle could accelerate quickly forward or in re- verse. Y ou could lose control of the vehicle and hit someone or something.
The following indicators should be used to ensure that you have engaged the transmission shift lever into the P (Park) position: • When shifting into P (Park) move the lever all the way forward until it stops, and is fully seated. • Look at the shift indicator display on the instrument panel to ensure it is in the P (Park) position.
Overdrive and shifting operation will r esume when the temperature of the transmission r eaches the appropriate temperature. Refer to the “ Note ” under “ T orque Con- verter Clutch ” later in this section.
T orque Converter Clutch A feature designed to impr ove fuel economy has been added to the automatic transmission of this vehicle. A clutch within the torque converter engages automatically at calibrated speeds. This may result in a slightly dif fer- ent feeling or response during normal operation in high gear .
NOTE: Even if the transmission can be reset, we recommend that you visit a dealer at your earliest possible convenience. Y our dealer has diagnostic equip- ment to determine if the problem could r ecur . If the transmission cannot be reset, dealer service is requir ed.
Park Position The P ARK position is to be used when parking the vehicle. Engage only with the vehicle stopped. The P ARK position is not intended to serve as a brake when the vehicle is parked. Rather , the driver should always use the parking brake in addition to placing the selector lever in P ARK to secure the vehicle.
Neutral No power is transmitted from the engine to the drive axle. When the brakes are r eleased, the vehicle can be moved freely (pushed or towed). Do not engage in NEUTRAL position while driving except to coast when the vehicle is in danger of skidding (e.
NOTE: T o avoid overrevving the engine when the selector lever is moved in “ D- ” direction, the transmis- sion will not shift to a lower gear if the engine ’ s revolu- tions per minute limit would be exceeded. Briefly press the selector lever in the “ D+ ” direction.
A reset feature is available to allow the vehicle to be driven to a dealer for service. T o reset the transmission, use the following procedur e: 1. Stop the vehicle. 2. Move the selector lever to the P ARK position. 3. T urn off the engine. 4. W ait approximately 10 seconds.
Automatic T ransmission — General Information CAUTION! Damage to the transmission may occur if the follow- ing precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed.
• If there is a need to r estart your engine be sure to cycle the key to the LOCK position before r estarting. T rans- mission engagement may be delayed up to 10 seconds after restart if the key is not cycled to the LOCK position first. • The electronically contr olled transmission provides a precise shift schedule.
T o rock a vehicle out of soft gr ound (mud or snow), alternately shift from forwar d to reverse, while applying only slight acceleration. Rocking a vehicle free in this manner may cause the ABS or traction system malfunc- tion indicator light to come on.
Y ou can shift in or out of the autostick mode at any time without taking your foot off the accelerator pedal. If you choose the Overdrive mode, the transmission will oper - ate automatically; shifting between the five available gears.
T o release the parking brake, pull out on the parking brake release located on the left side of the instr ument panel. When parking on a hill, it is important to set the parking brake before placing the gear selector in Park, otherwise the load on the transmission locking mechanism may make it difficult to move the selector out of park.
BRAKE SYSTEM In the event power assist is lost for any reason (for example, repeated brake applications with the engine off), the brakes will still function. The ef fort required to brake the vehicle will be much greater than that r equired with the power system operating.
W ARNING! • Anti-lock system (ABS) cannot prevent the natu- ral laws of physics from acting on the vehicle, nor can it increase braking or steering efficiency be- yond that afforded by the condition of the vehicle brakes and tires or the traction afforded.
ABS is activated during braking under certain road or stopping conditions. ABS-inducing conditions can in- clude ice, snow , gravel, bumps, railroad tracks, loose debris, or panic stops.
POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason, the power assist is interr upted, it will still be possible to steer your vehicle.
MUL TI DISPLACEMENT SYSTEM (MDS) - 5.7L Engine Only This feature of fers improved fuel economy by shutting off four of the engine ’ s eight cylinders during light load and cruise conditions. The system is automatic with no driver inputs or additional driving skills requir ed.
TIRE PRESSURE MONITOR SYSTEM — IF EQUIPPED Tire Pressure Monitoring — Base System The T ire Pressur e Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pr essure levels (EXCLUDING THE SP ARE TIRE).
CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when using replacement equip- ment that is not of the same size, type, and/or style.
The T ire Pressur e Monitoring T elltale Light will illuminate in the instrument cluster , and an au- dible chime will be activated when one or more tire pr essures is low . The T ire Pressur e Monitoring T ell- tale Light will flash on and off for 10 to 60 seconds when a system fault is detected.
LEFT FRONT , LEFT REAR, RIGHT FRONT , RIGHT REAR LOW PRESSURE One or more of these messages will be displayed in the EVIC if a low tire pr essure condition exists in one or more tires.
NOTE: • The TPMS can inform the driver of a low tire pr essure condition. • The TPMS is not intended to replace normal tir e care and maintenance, nor to provide warning of a tir e failure or condition. • The TPMS should not be used as a tire pr essure gauge while adjusting your tire pr essure.
• European Metric tir e sizing is based on European design standards. T ires designed to this standar d have the tire size molded into the sidewall beginning with the section width. The letter ⬙ P ⬙ is absent from this tir e size designation. Example: 215/65R15 96H • L T (Light T ruck)-Metric tire sizing is based on U.
T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light T ruck tire based on U.
EXAMPLE: Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry . H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions.
Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire however the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire.
Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressure is listed on either the face of the driver ’ s door or the driver ’ s side “ B ” pillar .
Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire ’ s load carrying capacity if you adhere to the loa.
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer , load from your trailer will be transferred to your vehicle.
242 ST ARTING AND OPERA TING.
W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle.
2. Economy — Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Underinflation also increases tire rolling r esistance and results in higher fuel consumption.
CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap – if equipped. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard are always “ cold tire inflation pr essure ” .
W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. Y ou could have a serious accident. Don ’ t drive a vehicle loaded to the maximum capacity at continuous speeds above 75 mph (120 km/h).
Do not install a wheel cover or attempt to mount a conventional tire on the compact spar e wheel, since the wheel is designed specifically for the compact spare.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle ’ s wheels faster than 35 mph (55 km/h) when you are stuck.
Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread.
W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combina- tions of unapproved tires and wheels may change suspension dimensions and performance charac- teristics, resulting in changes to steering, han- dling, and braking of your vehicle.
TIRE CHAINS Use only compact chains, or other traction aids that meet SAE type “ Class S ” specifications. Chains must be the proper size for the vehicle, as r ecommended by the chain manufacturer . NOTE: Do not use tire chains on a compact spar e tire.
NOTE: In order to avoid damage to tir es, chains, and your vehicle do not drive for a prolonged period of time on dry pavement. Observe the tire chain manufactur er ’ s instructions on method of installation, operating speed, and conditions for usage.
Follow the recommended tir e rotation frequency for your type of driving found in the “ Maintenance Schedules ” Section of this manual. More fr equent rotation is permis- sible if desired. The r easons for any rapid or unusual wear should be corrected prior to r otation being per- formed.
Spark Knock Light spark knock at low engine speeds is not harmful to your engine. However , continued heavy spark knock at high speeds can cause damage and immediate service is requir ed. Poor quality gasoline can cause problems such as har d starting, stalling and hesitations.
CAUTION! DO NOT use gasolines containing Methanol. Use of these blends may result in starting and driveability problems and may damage critical fuel system com- ponents. Problems that r esult from using methanol/gasoline blends are not the r esponsibility of the manufacturer .
Fuel System Cautions CAUTION! Follow these guidelines to maintain your vehicle ’ s performance: • The use of leaded gas is prohibited by Federal law .
• Do not inhale exhaust gases. They contain carbon monoxide, a colorless and odorless gas which can kill. Never run the engine in a closed ar ea, such as a garage, and never sit in a parked vehicle with the engine running for an extended period.
NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler cap door reinfor cement. CAUTION! Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap), and may result in a malfunction indicator light on the instrument clus- ter .
NOTE: • T ighten the gas cap until you hear a “ clicking ” sound. This is an indication that the gas cap is properly tightened. If the gas cap is not secured pr operly the Malfunction Indicator Light in the instrument cluster will turn on. Make sure that the gas cap is tightened each time the vehicle is refueled.
VEHICLE LOADING The load carrying capacity of your vehicle is shown in the charts that follow . This information should be used for passenger and luggage loading as indicated. If the seatbacks are folded for carrying car go, do not exceed the specified GVWR and GA WR.
Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicle will provide satisfactory service as long as you do not exceed the GVWR and front and rear GA WR. The best way to figure out the total weight of your vehicle is to weigh it when it is fully loaded and ready for operation.
Front Axle Rear Axle Empty W eight 2054 lbs (932 kg) 1805 lbs (819 kg ) Load (Including driver , pass- sengers and cargo) 271 lbs (123 kg) 579 lbs (263 kg) T otal 2325 lbs (1055 kg) 2384 lbs (1081 kg).
Gross T railer W eight (GTW) The gross trailer weight (GTW) is the weight of the trailer plus the weight of all cargo, consumables and equipment (permanent or temporary) loaded in or on the trailer in its ⬙ loaded and ready for operation ⬙ condition.
W eight-Distributing Hitch A weight-distributing hitch includes a receiver attached to the tow vehicle, plus a removable hitch head and spring bar assembly that fits into the receiver opening and hook up brackets that connect the spring bars to the trailer frame.
Engine/T ransmission Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. 2.7L Automatic 22 SQ. FT . (2.04 square meters) Up to 2 persons & Lug- gage 1,000 lbs (454 kg) 100 lbs (45 kg) 22 SQ. FT . (2.04 square meters) Up to 3 persons & Lug- gage 1,000 lbs (454 kg) 100 lbs (45 kg) 22 SQ.
T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle.
T owing Requirements T o promote pr oper break-in of your new vehicle driv- etrain components the following guidelines are r ecom- mended: CAUTION! • A void towing a trailer for the first 500 miles (805 km) of vehicle operation. Doing so may damage your vehicle.
• V ehicles with trailers should not be parked on a grade. When parking, apply the parking brake on the tow vehicle. Put the tow vehicle automatic transmission in P for Park. Always, block or ⬙ chock ⬙ the trailer wheels. • GCWR must not be exceeded.
− An electronically actuated trailer brake contr oller is requir ed when towing a trailer with electronically actuated brakes. When towing a trailer equipped with a hydraulic surge actuated brake system, an electr onic brake controller is not r equired.
The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector . Refer to the following illustrations.
T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away fr om heavy traffic. T owing T ips — Automatic T ransmission The “ D ” range can be selected when towing. However , if frequent shifting occurs while in this range, the “ 3 ” range should be selected.
− Extended driving at high RPM should be avoided to prevent excess heat generation. A reduction in vehicle speed may be requir ed to avoid extended driving at high RPM. Return to a higher gear range or vehicle speed when road conditions and RPM level allows.
WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................. 2 7 4 䡵 If Y our Engine Overheats ................ 2 7 4 䡵 Jacking And T ire Changing ............... 2 7 5 ▫ Preparations For Jacking ................ 2 7 6 ▫ Jack Location/Spare T ire Stowage .
HAZARD W ARNING FLASHER The hazard flasher switch is located in the center of the instrument panel between the center air outlets. T o engage the Hazard W arning Flashers, depress the switch on the instrument panel.
NOTE: There ar e steps that you can take to slow down an impending overheat condition. If your air conditioner is on, turn it off. The air conditioning system adds heat to the engine cooling system and turning off the A/C removes this heat.
W ARNING! Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack.
Jack Location/Spare Tire Stowage The jack and spare tir e are both stowed under an access cover in the trunk. Follow these steps to access the jack and spare tir e. NOTE: The spare tir e must be removed in order to access the jack. • Open the trunk.
• Remove the spare tir e. • Remove the fastener securing the jack. Jacking and Changing a Tire 1. Block the wheel diagonally opposite the flat tire. Passengers should not remain in the vehicle when the vehicle is being jacked. 2. Remove the spare tire, jack and lug wr ench.
W ARNING! T o avoid possible personal injury , handle the wheel covers with care to avoid contact with the metal edges and retention teeth. 4. Before raising the vehicle loosen, but do not remove, the lug nuts of the flat tire using the lug wr ench. T urn the wheel nuts counterclockwise one turn while the wheel is still on the ground.
Jack Engagement Locations 280 WHA T TO DO IN EMERGENCIES.
7. Remove the lug nuts, wheel cover (if equipped) and tire. Remove the cover by hand, do not pry of f. 8. Mount the spare tire. For vehicles equipped with wheel covers, see the wheel cover installation instruc- tions. Do not attempt to install a wheel cover on a compact spare.
Wheel Cover Installation (If Required) 1. T ighten the two lug nuts on the mounting studs on each side of the stud which is in alignment with the valve stem. 2. Align the valve notch in the wheel cover with the valve stem on the wheel. 3. Install the cover by hand, snapping the cover over the two lug nuts.
W ARNING! • Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic transmission cannot be started this way . Un- burned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle.
4. Connect one end of the jumper cable to the remote jump start positive battery post (A) in the engine com- partment. Connect the other end of the same cable to the positive terminal of the booster battery . Refer to the following illustration for jump starting connections.
W ARNING! Rapid acceleration on slippery surfaces is danger- ous. Unequal traction can cause sudden pulling of the rear wheels. Y ou could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow , wet mud, loose sand, etc.
W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle ’ s wheels faster than 35 mph (55 km/h) when you are stuck.
CAUTION! • Do not attempt to tow this vehicle from the front with sling type towing equipment. Damage to the front fascia will result. • The only approved method of towing is with a flat bed truck. • Do not tow the vehicle from the rear . Damage to the rear sheet metal, and fascia will occur .
.
MAINT AINING YOUR VEHICLE CONTENTS 䡵 2.7L Engine .......................... 2 9 2 䡵 3.5L Engine .......................... 2 9 3 䡵 5.7L Engine .......................... 2 9 4 䡵 Onboard Diagnostic System — OBD II ...... 2 9 5 䡵 Emissions Inspection And Maintenance Programs .
▫ Body Lubrication ..................... 3 0 9 ▫ W indshield W iper Blades ................ 3 1 0 ▫ W indshield W ashers/Headlight W ashers — If Equipped ......................... 3 1 0 ▫ Exhaust System ...................... 3 1 1 ▫ Cooling System .
䡵 Fluids And Capacities ................... 3 4 4 䡵 Fluids, Lubricants And Genuine Parts ....... 3 4 5 ▫ Engine ............................. 3 4 5 ▫ Chassis .
2.7L ENGINE 2.7L Engine Compartment 292 MAINT AINING YOUR VEHICLE.
3.5L ENGINE 3.5L Engine Compartment MAINT AINING YOUR VEHICLE 293 7.
5.7L ENGINE 5.7L Engine Compartment 294 MAINT AINING YOUR VEHICLE.
ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems.
EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of your vehicle ’ s emissions control system.
If your OBD system is not ready , you should see your authorized dealer or repair facility . If your vehicle was recently serviced or had a battery failur e or replacement, you may need to do nothing more than drive your vehicle as you normally would in order for your OBD system to update.
W ARNING! Y ou can be badly injured working on or around a motor vehicle. Do only that service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perform a service job, take your vehicle to a competent mechanic.
CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure. This could damage your engine. Checking Oil Level — 5.7L Engines T o assure pr oper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop.
CAUTION! Overfilling or underfilling will cause oil aeration or loss of oil pressure. This could damage your engine. CAUTION! Operating the engine with the oil levels below the safe zone, or operating with oil levels that exceed the top of the safe zone may cause engine damage.
recommends engine oils that ar e API certified and meet the requir ements of DaimlerChrysler Material Standard MS-6395. Use Mopar 威 or an equivalent oil meeting the specification MS-6395. American Petroleum Institute (API) Engine Oil Identification Symbol This symbol means that the oil has been certified by the American Petroleum Institute (API).
engine oil viscosity chart. SAE 5W -30 Engine Oil is allowed for use in the 3.5L Engine during cold weather only to improve cold weather starting. The engine oil filler cap also shows the recommended engine oil viscosity for your engine.
environment. Contact your dealer , service station, or governmental agency for advice on how and where used oil and oil filters can be safely discarded in your ar ea. Engine Oil Filter The engine oil filter should be replaced at every engine oil change.
Engine Air Cleaner Filter Under normal driving conditions, replace the air filter at the intervals shown on Schedule “ A. ” If, however , you drive the vehicle frequently under dusty or sever e con- ditions, the filter element should be inspected periodi- cally and replaced if necessary at the intervals shown on Schedule “ B.
CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor- mance, have your vehicle serviced promptly .
T o minimize the possibility of catalyst damage: • Do not shut off the engine or interr upt the ignition when the transmission is in gear and the vehicle is in motion.
W ARNING! • Battery fluid is a corrosive acid solution and can burn or even blind you. Don ’ t allow battery fluid to contact your eyes, skin or clothing. Don ’ t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area imme- diately with large amounts of water .
W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs.
Refer to the “ Maintenance Schedules ” section of this manual for the recommended air conditioning filter replacement intervals. Power Steering — Fluid Check Checking the power steering fluid level at a defined service interval is not requir ed.
underhood services, the hood latch, r elease mechanism and safety catch should be cleaned and lubricated. The external lock cylinders should be lubricated twice a year , preferably in the fall and spring. Apply a small amount of a high quality lubricant such as Mopar 威 Lock Cylinder Lubricant or equivalent directly into the lock cylinder .
The fluid reservoir will hold 1 gallon (3.8L) of washer fluid when the message “ Low W asher Fluid ” appears in the Electronic V ehicle Information Center (EVIC) — if equipped. Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system.
Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position.
Cooling System — Drain, Flush and Refill At the intervals shown on the Maintenance Schedules, the system should be drained, flushed and refilled. If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner .
Adding Coolant Y our vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Y ears or 100,000 miles (160 000 km) before r eplacement. T o prevent reducing this extended maintenance period, it is important that you use the same coolant throughout the life of your vehicle.
W ARNING! • The warning words “ DO NOT OPEN HOT ” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system.
Points T o Remember NOTE: When the vehicle is stopped after a few miles (kilometers) of operation, you may observe vapor coming from the fr ont of the engine compartment.
Pay particular attention to those hoses nearest to high heat sources such as the exhaust manifold. Inspect hose routing to be sur e hoses do not come in contact with any heat source or moving component which may cause heat damage or mechanical wear . Insure nylon tubing in these ar eas has not melted or collapsed.
NOTE: Often, fluid such as oil, power steering fluid, and brake fluid are used during assembly plant opera- tions to facilitate the assembly of hoses to couplings. Therefor e, oil wetness at the hose-coupling area is not necessarily an indication of leakage.
Use only manufacturers r ecommended brake fluid, refer to Fluids, Lubricants and Genuine Parts for correct fluid type. W ARNING! • Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire.
Automatic T ransmission Fluid Level Check Regular automatic transmission fluid level checks are not requir ed. For this reason the dipstick is omitted. If you notice fluid loss or gear shift malfunction, have your authorized dealer check the transmission fluid level.
All Wheel Drive (A WD) — If Equipped The all wheel drive system consists of a T ransfer Case, and Front Dif ferential. The exterior surface of these components should be inspected for evidence of fluid leaks. Confirmed leaks should be repair ed as soon as possible.
hot or cold weather and other extreme conditions will have an adverse effect on paint, metal trim, and under - body protection. The following maintenance recommendations will enable you to obtain maximum benefit from the corr osion resistance built into your vehicle.
Special Care • If you drive on salted or dusty roads or if you drive near the ocean, hose off the under carriage at least once a month. • It is important that the drain holes in the lower edges of the doors, rocker panels and tr unk be kept clear and open.
Mopar 威 T otal Clean is specifically recommended for leather upholstery . Y our leather upholstery can be best preserved by r egular cleaning with a damp soft cloth. Small particles of dirt can act as an abrasive and damage the leather upholstery and should be removed pr omptly with a damp cloth.
Seat Belt Maintenance Do not bleach, dye or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the belts need cleaning use Mopar 威 T otal Clean, a mild soap solution, or lukewarm water .
Power Distribution Centers Front Power Distribution Center A power distribution center is located in the engine compartment. This center contains fuses and relays. CAUTION! • When installing the Power Distribution Center cover , it is important to ensure the cover is prop- erly positioned and fully latched.
Front Power Distribution Center Fuses Cavity Fuse Circuits 1 20 Amp Y ellow Left High Intensity Discharge Headlight - if equipped 2 20 Amp Y ellow Right High Intensity Discharge Headlight - if equippe.
Cavity Fuse Circuits 22 40 Amp Green AC Clutch/Radiator Fan High — Low 23 50 Amp Red High Intensity Lighting - if equipped 24 60 Amp Y ellow Radiator Fan - A WD 25 30 Amp Pink Front Contr ol Module .
CAUTION! • When installing the Power Distribution Center cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Power Distribu- tion Center , and possibly result in a electrical system failure.
Rear Power Distribution Center Fuses Cavity Fuse Circuits 1 60 Amp Y ellow Ignition Off Draw (IOD) 2 40 Amp Green Battery 3 —— 4 40 Amp Green Battery 5 30 Amp Pink Heated Seats - if equipped 6 20 .
Cavity Fuse Circuits 18 20 Amp Y ellow Selectable Power Outlet 19 10 Amp Red Stop Lights 20 —— 21 —— 22 —— 23 —— 24 —— 25 —— 26 —— 27 10 Amp Red Airbag/Occupant Classifica-.
Cavity Fuse Circuits 37 15 Amp Blue T ransmission - NAG1 38 5 Amp Orange Analog Clock/Cargo Light/ Overhead Console - if equipped 39 10 Amp Red Heated Mirrors - if equipped 40 5 Amp Orange Heated Seat.
REPLACEMENT LIGHT BULBS LIGHT BULBS — Interior Bulb Number Rear Courtesy/Reading Lights .............. W 5 W Rear Compartment (T runk) Light ............. 5 7 9 Overhead Console Reading Lights ............. 5 7 8 V isor V anity Lights ..............
LIGHT BULBS — Exterior (300C Models) Bulb Number Low Beam Headlight (Standard Halogen) ..... 9006XS Low Beam Headlight – High Intensity Discharge (HID) .................. D 1 S (Serviced at Dealer) High Beam Headlight ..................... 9005 Front Park/T urn Light .
MAINT AINING YOUR VEHICLE 335 7.
CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol.
NOTE: On vehicles equipped with High Intensity Dis- charge Headlights (HID), when the headlights ar e turned on there is a blue hue to the lights. This diminishes and becomes more white after appr oximately 10 seconds, as the system charges. • Open the hood.
CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. Backup Light, Side Marker Light, and T ail/Stop T urn Light — 300 Models 1.
3. Pull back the trunk liner . 4. Remove the remaining fastener from the back of the tail light assembly . 5. Push the electrical connector locking tab to the side. 6. Disconnect the electrical connector . 7. Pull tail light assembly clear from vehicle to access bulbs.
8. Pull the appropriate bulb to remove it fr om the socket. 9. Replace the bulb, reinstall the socket, and reattach the tail light assembly . 10. Close the trunk.
T ail/Stop, T ail, T urn Signal Light, and Backup Light — 300C Models 1. Open the T runk. 2. Remove two fasteners from the back of the tail light assembly . 3. Pull back the trunk liner . 4. Remove the remaining fastener from the back of the tail light assembly .
7. Pull tail light assembly clear from vehicle to access bulbs. T urn bulb sockets counter-clockwise to r emove. 342 MAINT AINING YOUR VEHICLE.
8. Pull the appropriate bulb to remove it fr om the socket. 9. Replace the bulb, reinstall the socket, and reattach the tail light assembly . 10. Close the trunk.
License Light 1. Remove the screws securing the light to the rear fascia. 2. Remove the bulb and socket assembly and pull the bulb from the socket. 3. Replace the bulb and r einstall the bulb and socket assembly . 4. Reattach the light to the rear fascia.
Cooling System * 2.7 Liter Engines (Mopar 威 Antifreeze/Coolant 5 Y ear/ 100,000 Mile Formula) or equivalent. 9.7 qts 9.2 liters 3.5 Liter Engines (Mopar 威 Antifreeze/Coolant 5 Y ear/ 100,000 Mile Formula) or equivalent. 10.6 qts 10.0 li- ters 5.7 Liter Engines (Mopar 威 Antifreeze/Coolant 5 Y ear/ 100,000 Mile Formula) or equivalent.
FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluids, Lubricants and Genuine Parts Engine Coolant Mopar 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Organic Ad- ditive T echnology) Engine Oil (2.7 Liter) Use API Certified engine oil.
Chassis Component Fluids, Lubricants and Genuine Parts Automatic T ransmission Mopar 威 A TF+4 Automatic T ransmission Fluid or equivalent. Brake Master Cylinder Mopar 威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable.
.
MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance ...... 3 5 0 䡵 Maintenance Schedules .................. 3 5 0 ▫ Schedule “ B ” .
EMISSION CONTROL SYSTEM MAINTENANCE The “ Scheduled ” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued pr oper functioning of the emission control system.
• Extensive engine idling. • Driving in dusty conditions. • Short trips of less than 10 miles (16.2 km). • More than 50% of your driving is at sustained high speeds during hot weather , above 90 ° F (32 ° C). • T railer towing. 〫 • T axi, police, or delivery service (commercial ser - vice).
At Each Stop for Fuel • Check the engine oil level about 5 minutes after a fully warmed engine is shut off. Checking the oil level while the vehicle is on level ground will impr ove the accu- racy of the oil level reading. Add oil only when the level is at or below the ADD or MIN mark.
SCHEDULE “ B ” Follow Schedule “ B ” if you usually operate your vehicle under one or more of the following conditions. Change the automatic transmission fluid and filter every 60,000 miles (100 000 km) if the vehicle is usually operated under one or more of the conditions marked with an 〫 .
Miles 3,000 6,000 9,000 12,000 15,000 18,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) (30 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.* XXXX X Replace the air cleaner filter .
Miles 21,000 24,000 27,000 30,000 33,000 36,000 (Kilometers) (35 000) (40 000) (45 000) (50 000) (55 000) (60 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.
Miles 39,000 42,000 45,000 48,000 51,000 54,000 (Kilometers) (65 000) (70 000) (75 000) (80 000) (85 000) (90 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.
Miles 57,000 60,000 63,000 66,000 69,000 72,000 (Kilometers) (95 000) (100 000) (105 000) (1 10 000) (1 15 000) (120 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.
Miles 75,000 78,000 81,000 84,000 87,000 90,000 (Kilometers) (125 000) (130 000) (135 000) (140 000) (145 000) (150 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Inspect the air cleaner filter and replace if r e- quired.
Miles 93,000 96,000 99,000 102,000 105,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter .
Miles 108,000 11 1,000 1 14,000 1 17,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Inspect the air cleaner filter and replace if r e- quired.* XXXX Replace the air cleaner filter .
SCHEDULE “ A ” Miles 6,000 12,000 18,000 24,000 30,000 36,000 (Kilometers) (10 000) (20 000) (30 000) (40 000) (50 000) (60 000) [Months] [6] [12] [18] [24] [30] [36] Change engine oil and engine oil filter . X XXXXX Inspect the air cleaner filter and replace if r e- quired.
Miles 42,000 48,000 54,000 60,000 66,000 72,000 (Kilometers) (70 000) (80 000) (90 000) (100 000) (1 10 000) (120 000) [Months] [42] [48] [54] [60] [66] [72] Change engine oil and engine oil filter . X X X X X X Inspect the air cleaner filter and replace if requir ed.
Miles 78,000 84,000 90,000 96,000 102,000 (Kilometers) (130 000) (140 000) (150 000) (160 000) (170 000) [Months] [78] [84] [90] [96] [102] Change engine oil and engine oil filter . X X X X X Inspect the air cleaner filter and replace if r e- quired.* XX X X Replace the air cleaner filter .
Miles 108,000 1 14,000 120,000 (Kilometers) (180 000) (190 000) (200 000) [Months] [108] [1 14] [120] Change engine oil and engine oil filter . X X X Inspect the air cleaner filter and replace if r equired.* X X Replace the air cleaner filter . X Inspect the front and r ear brake linings and rotors.
IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 3 6 6 ▫ Prepar e For The Appointment ............ 3 6 6 ▫ Prepar e A List ........................ 3 6 6 ▫ Be Reasonable W ith Requests .
SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you ’ re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager .
• If for some reason you ar e still not satisfied, talk to the general manager or owner of the dealership. They want to know if you need assistance. • If your dealership is unable to resolve the concern, you may contact the Manufacturer ’ s Customer Center .
Service Contract Y ou may have purchased a service contract for your vehicle to help protect you fr om the high cost of unex- pected repairs after your manufactur er ’ s new vehicle limited warranty expires. The manufactur er stands be- hind only the manufacturer ’ s Service Contracts.
REPORTING SAFETY DEFECTS In the 50 United States and W ashington D.C.: If you believe that your vehicle has a defect which could cause a crash or cause injury or death, you should immediately inform the National Highway T raffic Safety Administra- tion (NHTSA) in addition to notifying the manufacturer .
• Service Manuals. These comprehensive service manuals pr ovide the information that students and professional technicians need in diagnosing/troubleshooting, pr oblem solving, maintaining, servicing and repairing DaimlerChrysler Corporation vehicles.
DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the National highway T raffic Safety Adminis- tration. The specific grade rating assigned by the tire ’ s manufacturer in each category is shown on the sidewall of the tires on your car .
T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire ’ s r esistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
INDEX 10.
ABS (Anti-Lock Brake System) ............. 2 2 5 Adding Engine Coolant (Antifreeze) ......... 3 1 4 Adding Fuel .......................... 2 5 7 Adding W asher Fluid .............. 109,1 10,310 Additives, Fuel ........................ 2 5 5 Adjustable Pedals .
Ball Joints ............................ 3 0 9 Battery ............................... 3 0 6 Jump Starting ........................ 2 8 2 Keyless T ransmitter Replacement (RKE) ..... 2 4 Location ......................... 283,306 Bearings ............
Compass V ariance ...................... 1 5 5 Computer , T rip/T ravel ................... 1 5 3 Console .............................. 1 3 5 Console, Floor ......................... 1 3 5 Console, Overhead ...................... 1 2 2 Contract, Service .
Hazard W arning Flasher ................ 2 7 4 Jacking ............................. 2 7 5 Jump Starting ........................ 2 8 2 Overheating ......................... 2 7 4 T owing ............................. 2 8 6 Emission Control System Maintenance .
Cooling System ....................... 3 1 2 Engine Oil ....................... 298,299 Power Steering ....................... 3 0 9 Fluids ............................... 3 4 6 Fluids, Lubricants and Genuine Parts ........ 3 4 6 Fog Lights ..........
On W ith W ipers ................... 103,108 Passing ............................. 1 0 6 Switch .......................... 102,103 T ime Delay .......................... 1 0 5 W ashers ......................... 1 10,310 Heated Seats ..................
Lap/Shoulder Belts ...................... 3 2 LA TCH (Lower Anchors and T ether for CHildren) ..... 5 6 Latch Plate ............................ 3 3 Latches Hood ............................... 9 9 Lead Free Gasoline ...................... 2 5 3 Life of T ires .
Lower Anchors and T ether for CHildren (LA TCH) .............................. 5 6 Lubrication, Body ....................... 3 0 9 Lumbar Support ........................ 9 2 Maintenance Free Battery ................. 3 0 6 Maintenance Procedur es ...
Synthetic ........................... 3 0 2 V iscosity ......................... 301,344 Onboard Diagnostic System ............ 295,296 Opener , Garage Door (HomeLink 威 ) ......... 1 2 3 Operator Manual (Owner ’ s Manual) .......... 4 Overhead Console .
Radio (Sound Systems) ................ 164,171 Rain Sensitive W iper System .............. 1 0 7 Rear Park Assist System .................. 1 1 4 Rear Seat, Folding ....................... 9 4 Rear W indow Defroster .................. 1 9 3 Rearview Mirrors .
Rear Folding ......................... 9 4 Reclining ............................ 9 1 Security Alarm (Theft Alarm) ............... 2 5 Selection of Coolant (Antifreeze) ......... 313,346 Self-Sealing T ires ....................... 2 2 9 Sentry Key (Immobilizer) .
T emperature Gauge, Engine Coolant ...... 146,275 Theft Alarm (Security Alarm) ............... 2 5 Theft System (Security Alarm) .............. 2 5 T ie Down Hooks, Cargo .................. 1 3 5 T ilt Steering Column .................. 1 1 1 , 1 1 2 T ire and Loading Information Placard .
T railer T owing ......................... 2 6 2 Cooling System T ips ................... 2 7 2 Hitches ............................. 2 6 4 Minimum Requirements ................ 2 6 7 T railer and T ongue W eight .............. 2 6 6 W iring .........
Wheel and Wheel T rim ................... 3 2 3 Wheel Bearings ........................ 3 2 1 W ind Buffeting ...................... 29,130 W indow Airbag (Side Curtain) ............ 40,47 W indow Fogging .................... 195,202 W indows ........
NOTES.
NOTES.
NOTES.
NOTES.
NOTES.
デバイスChrysler 2006 300の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Chrysler 2006 300をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはChrysler 2006 300の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Chrysler 2006 300の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Chrysler 2006 300で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Chrysler 2006 300を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はChrysler 2006 300の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Chrysler 2006 300に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちChrysler 2006 300デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
